Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

After adding support for offline vcpu pinning the code that removes the
pinning for cpu cold-unplug was forgotten. This fixes up commit 02ae21de

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316371

Memory returned from virStringSplit shall be freed with
virStringFreeList rather than VIR_FREE. Introduced in commit 511e7c5b.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316433

Now that the function was extracted we can get rid of some temp
variables. Additionally formatting of the bitmap string for the event
code should be checked.

The function was now beyond maintainability.

Allow pinning for inactive vcpus. The pinning mask will be automatically
applied as we would apply the default mask in case of a cpu hotplug.

Setting the scheduler settings for a vcpu has the same semantics.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1306556

Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.

The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.

The implementation of the inner guts of the function is similar for all
drivers, so we can add a helper and not have to reimplement it three
times.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We would happily report and free statistics of a completed migration
even before it actually completed (on the source host while migration is
in the Finish phase).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Computing a total downtime during a migration requires us to store a
time stamp when guest CPUs get stopped. The value (and all other
statistics) is then transferred to the destination to compute the
downtime. Because the stopped time stamp is stored by a STOP event
handler while the statistics which will be sent over to the destination
are copied synchronously within qemuMigrationWaitForCompletion.

Depending on the timing of STOP and MIGRATION events, we may end up
copying (and transferring) statistics without the stopped time stamp
set. Let's make sure we always use the correct time stamp.

https://bugzilla.redhat.com/show_bug.cgi?id=1282744Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

With a very old QEMU which doesn't support events we need to explicitly
call qemuMigrationSetOffline at the end of migration to update our
internal state. On the other hand, if we talk to QEMU using QMP, we
should just wait for the STOP event and let the event handler update the
state and trigger a libvirt event.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We should not overwrite all migration statistics on the source with the
numbers sent by the destination since the source may have an updated
view in some cases (such as post-copy migration). It's safer to update
just the timing info we need to get from the destination and be prepared
for the future. And we should only do all this after a successful
migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Statistics for a completed migration only make sense if the migration
was successful. Let's not store them in priv->job.completed until we
are sure it was a success.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The code does not handle renaming of the save state file. In addition to
that the resuming code would need to be tweaked to handle the name
change since the XML is extracted from the save image. The easies option
is to make the rename API even less useful by forbiding this.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314594

While trying to build with -Os couple of compile errors showed
up.

conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     virDomainChrDefPtr ret, **arrPtr = NULL;
                        ^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.

In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.

In file included from ./util/virthread.h:26:0,
                 from ./datatypes.h:28,
                 from vbox/vbox_tmpl.c:43,
                 from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     virReportErrorHelper(VIR_FROM_THIS, code, __FILE__,              \
     ^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
     nsresult rc;
              ^
Yet again, one uninitialized variable:

qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
         qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
         ^

And another one:

storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
                       thisSource->devices[j].path))
                                 ^
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Reporting status of a control connection makes no sense for an inactive
domain.

https://bugzilla.redhat.com/show_bug.cgi?id=1281706Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

in commit 81a110, multiqueue for macvtap is enabled but forget
to support hotplugging enabled
Signed-off-by: NShanzhi Yu <shyu@redhat.com>

When SPICE graphics is configured for a domain but we did not ask the
client to switch to the destination, we should not wait for
SPICE_MIGRATE_COMPLETED event (which will never come).

https://bugzilla.redhat.com/show_bug.cgi?id=1151723Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Migration statistics are not available on the destination host and
starting a query job during incoming migration is not allowed. Trying to
do that would result in

    Timed out during operation: cannot acquire state change lock (held
    by remoteDispatchDomainMigratePrepare3Params)

error. We should not even try to start the job.

https://bugzilla.redhat.com/show_bug.cgi?id=1278727Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This functions setups per-domain cpu bandwidth parameters
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Similarly to the refactors to iothreads and vcpus, move the code that
initializes the emulator thread settings into single function.

This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory.  It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar.  If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We honour the placement bitmaps when starting up, so there's no point in
having this check. Additionally the check was buggy since it checked
vm->def all the time even if the user requested to modify the persistent
definition which had different configuration.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308317

Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit f1a89a8b allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.

Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.

https://bugzilla.redhat.com/show_bug.cgi?id=1267256

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1298070

The corresponding chardev must be attached first, otherwise the
the qemu command line won't be complete (missing the host part),

There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case you will specify graphics like this:

<graphics type='spice' port='-1'/>

or

<graphics type='spice' port='-1' tlsPort='6000'/>

libvirt will automatically add autoport='no'.  This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.

If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.

Best viewed with '-w'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.