Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE
filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows
room for other temporary mounts in the same directory

Some of the LXC callbacks did not lock the virDomainObjPtr
instance. This caused transient errors like

error: Failed to start domain busy-mount
error: cannot rename file '/var/run/libvirt/lxc/busy-mount.xml.new' as '/var/run/libvirt/lxc/busy-mount.xml': No such file or directory

as 2 threads tried to update the status file concurrently
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The 'nodeset' variable was never initialized, causing a later
VIR_FREE(nodeset) to free uninitialized memory.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds cpuset cgroup support for LXC.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.

This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Allow lxc using the advisory nodeset from querying numad,
this means if user doesn't specify the numa nodes that
the lxc domain should assign to, libvirt will automatically
bind the lxc domain to the advisory nodeset which queried from
numad.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The LXC controller is closing loop devices as soon as the
container has started. This is fine if the loop device
was setup as a mounted filesystem, but if we're just passing
through the loop device as a disk, nothing else is keeping
it open. Thus we must keep the loop device FDs open for as
long the libvirt_lxc process is running.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the LXC controller creates the cgroup, configures the
resources and adds the task all in one go. This is not sufficiently
flexible for the forthcoming NBD integration. We need to make sure
the NBD process gets into the right cgroup immediately, but we can
not have limits (in particular the device ACL) applied at the point
where we start qemu-nbd. So create a virLXCCgroupCreate method
which creates the cgroup and adds the current task to be called
early, and leave virLXCCgroupSetup to only do resource config.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The naming used in the RPC protocols for the LXC monitor and
lock daemon confused the script used to generate systemtap
helper functions. Rename the LXC monitor protocol symbols to
reduce confusion. Adapt the gensystemtap.pl script to cope
with the LXC monitor / lock daemon naming conversions.

This has no functional impact on RPC wire protocol, since
names are only used in the C layer
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If an LXC domain failed to start because of a bogus SELinux
label, virLXCProcessStart would call VIR_CLOSE(0) by mistake.
This is because the code which initializes the member of the
ttyFDs array to -1 got moved too far away from the place where
the array is first allocated.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In some startup failure modes, the fuse thread may get itself
wedged. This will cause the entire libvirt_lxc process to
hang trying to the join the thread. There is no compelling
reason to wait for the thread to exit if the whole process
is exiting, so just daemonize the fuse thread instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virDomainGetSecurityLabel method is currently (mistakenly)
showing the label of the libvirt_lxc process:

...snip...
Security model: selinux
Security DOI:   0
Security label: system_u:system_r:virtd_t:s0-s0:c0.c1023 (permissive)

when it should be showing the init process label

...snip...
Security model: selinux
Security DOI:   0
Security label: system_u:system_r:svirt_t:s0:c724,c995 (permissive)

The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.

When setting up disks with loop devices for LXC, one of the
switch cases was missing a 'break' causing it to fallthrough
to an error condition.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

these were missed by 63f18f37

otherwise we crash with

 #0  virUSBDeviceListFind (list=0x0, dev=dev@entry=0x8193d70) at util/virusb.c:526
 #1  0xb1a4995b in virLXCPrepareHostdevUSBDevices (driver=driver@entry=0x815d9a0, name=0x815dbf8 "debian-700267", list=list@entry=0x81d8f08) at lxc/lxc_hostdev.c:88
 #2  0xb1a49fce in virLXCPrepareHostUSBDevices (def=0x8193af8, driver=0x815d9a0) at lxc/lxc_hostdev.c:261
 #3  virLXCPrepareHostDevices (driver=driver@entry=0x815d9a0, def=0x8193af8) at lxc/lxc_hostdev.c:328
 #4  0xb1a4c5b1 in virLXCProcessStart (conn=0x817d3f8, driver=driver@entry=0x815d9a0, vm=vm@entry=0x8190908, autoDestroy=autoDestroy@entry=false, reason=reason@entry=VIR_DOMAIN_RUNNING_BOOTED)
     at lxc/lxc_process.c:1068
 #5  0xb1a57e00 in lxcDomainStartWithFlags (dom=dom@entry=0x815e460, flags=flags@entry=0) at lxc/lxc_driver.c:1014
 #6  0xb1a57fc3 in lxcDomainStart (dom=0x815e460) at lxc/lxc_driver.c:1046
 #7  0xb79c8375 in virDomainCreate (domain=domain@entry=0x815e460) at libvirt.c:8450
 #8  0x08078959 in remoteDispatchDomainCreate (args=0x81920a0, rerr=0xb65c21d0, client=0xb0d00490, server=<optimized out>, msg=<optimized out>) at remote_dispatch.h:1066
 #9  remoteDispatchDomainCreateHelper (server=0x80c4928, client=0xb0d00490, msg=0xb0d005b0, rerr=0xb65c21d0, args=0x81920a0, ret=0x815d208) at remote_dispatch.h:1044
 #10 0xb7a36901 in virNetServerProgramDispatchCall (msg=0xb0d005b0, client=0xb0d00490, server=0x80c4928, prog=0x80c6438) at rpc/virnetserverprogram.c:432
 #11 virNetServerProgramDispatch (prog=0x80c6438, server=server@entry=0x80c4928, client=0xb0d00490, msg=0xb0d005b0) at rpc/virnetserverprogram.c:305
 #12 0xb7a300a7 in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>, client=<optimized out>, srv=0x80c4928) at rpc/virnetserver.c:162
 #13 virNetServerHandleJob (jobOpaque=0xb0d00510, opaque=0x80c4928) at rpc/virnetserver.c:183
 #14 0xb7924f98 in virThreadPoolWorker (opaque=opaque@entry=0x80a94b0) at util/virthreadpool.c:144
 #15 0xb7924515 in virThreadHelper (data=0x80a9440) at util/virthreadpthread.c:161
 #16 0xb7887c39 in start_thread (arg=0xb65c2b70) at pthread_create.c:304
 #17 0xb77eb78e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130

when adding a domain with a usb device. This is Debian bug

    http://bugs.debian.org/700267

This fixes the build on Debian Wheezy which otherwise fails with:

  CC     libvirt_driver_lxc_impl_la-lxc_process.lo
  lxc/lxc_process.c: In function 'virLXCProcessGetNsInode':
  lxc/lxc_process.c:648:5: error: implicit declaration of function 'stat' [-Werror=implicit-function-declaration]
  lxc/lxc_process.c:648:5: error: nested extern declaration of 'stat' [-Werror=nested-externs]
  cc1: all warnings being treated as errors

To allow the efficient correlation of container audit messages
with host hosts, include the pid namespace inode in audit
messages.

By using a loopback device, disks backed by plain files can
be made available to LXC containers. We make no attempt to
auto-detect format if <driver type="raw"/> is not set,
instead we unconditionally treat that as meaning raw. This
is to avoid the security issues inherent with format
auto-detection
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Minor re-factoring of code for setting up loop devices in
the LXC controller
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently we rely on a VIR_ERROR message being logged by the
virRaiseError function to report LXC startup errors. This gives
the right message, but is rather ugly and can be truncated
if lots of log messages are written. Change the LXC controller
to explicitly print any virErrorPtr message to stderr. Then
change the driver to skip over anything that looks like a log
message.

The result is that this

error: Failed to start domain busy
error: internal error guest failed to start: 2013-03-04 19:46:42.846+0000: 1734: info : libvirt version: 1.0.2
2013-03-04 19:46:42.846+0000: 1734: error : virFileLoopDeviceAssociate:600 : Unable to open /root/disk.raw: No such file or directory

changes to

error: Failed to start domain busy
error: internal error guest failed to start: Unable to open /root/disk.raw: No such file or directory
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In the LXC container startup code when switching stdio
streams, we call VIR_FORCE_CLOSE on all FDs. This triggers
a huge number of warnings, but we don't see them because
stdio is closed at this point. strace() however shows them
which can confuse people debugging the code. Switch to
VIR_MASS_CLOSE to avoid this
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the usbDeviceXXX and usbXXXDevice APIs to have a
fixed virUSBDevice name prefix

When iterating over USB host devices to setup cgroups, the
usbDevice object was leaked in both LXC and QEMU driers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.

This pair, used in virDomainCreateXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainRestoreFlags:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, true)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainDefineXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   0, NULL)))
     goto cleanup;

As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.

As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach

The APIs names for accessing the domain list object are
very inconsistent. Rename them all to have a standard
virDomainObjList prefix.

A followon to commit id: 68dceb63 - if iface->iname is NULL, then
neither virNetDevOpenvswitchRemovePort() nor virNetDevVethDelete()
should be called.  Found by Coverity.

It was possible to call VIR_FREE in cleanup prior to initialization

The use of switch statements inside a bounded for loop resulted in some
false positives regarding the "default:" label which cannot be reached
since each of the other case statements use the possible for loop values.

The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

libvirt lxc will fail to start when selinux is disabled.
error: Failed to start domain noroot
error: internal error guest failed to start: PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_UUID=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_NAME=noroot /bin/sh
2013-01-09 11:04:05.384+0000: 1: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 1: error : lxcContainerMountBasicFS:546 : Failed to mkdir /sys/fs/selinux: No such file or directory
2013-01-09 11:04:05.384+0000: 7536: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 7536: error : virLXCControllerRun:1466 : error receiving signal from container: Input/output error
2013-01-09 11:04:05.404+0000: 7536: error : virCommandWait:2287 : internal error Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1"

fix this problem by checking if selinuxfs is mounted
in host before we try to create dir /sys/fs/selinux.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The virDomainLxcOpenNamespace method needs to open every file
in /proc/$INITPID/ns and return the open file descriptor to the
client application.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Mark virDomainLxcEnterNamespace as skipped in python binding
and remove reference to lxcDomainOpenNamespace which doesn't
arrive until a later patch