Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.

ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}

V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).

This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr

Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags

* src/internal.h: move xstrol() variants from here ...

* src/util.[ch]: ... to here and rename to virStrToLong()

* src/libvirt_sym.version: export __virStrToLong_i() for
virsh and qemud.

* src/nodeinfo.c, src/stats_linux.c, src/virsh.c,
  src/xend_internal.c, qemud/qemud.c: replace xstrtol()
calls with virStrToLong()

* src/nodeinfo.h: don't include internal.h, which was only
needed for xstrtol(), but instead include libvirt.h which
is suffificient for the declarations in the header.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel

  src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h:
  applied patch from Richard Jones adding check to printf-like
  functions and fixing the problems raised
Daniel

        * qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
        requests and replies to the protocol.

        * src/qemu_internal.c: hookup the qemu driver autostart
        methods

        * qemud/dispatch.c, qemud/driver.[ch], internal.h: add
        the daemon side, but just set an in-memory autostart
        flag for now.

        * qemud/driver.[ch], qemud/dispatch.c: fix the fact that
        qemudDispatchDomainStart() doesn't report an error if the uuid
        lookup fails and also move the uuid lookup into the driver
        so that it matches the way we do Destroy().

        * include/libvirt/libvirt.h.in, src/libvirt.c: add
        virNetworkGetBridgeName() to allow finding out what
        bridge to connect to in order to join a network.

        * src/driver.h: add networkGetBridgeName() to vtable.

        * qemud/protocol.h: add the request and reply to
        the qemud protocol.

        * qemud/dispatch.c, qemud/driver.[ch]: handle them
        here.

        * src/qemu_internal.c: implement GetBridgeName()
        in the qemu driver.

        * src/libvirt_sym.version: add new symbol.

        * qemud/protocol.h: add the protocol for virtual networks

        * qemud/dispatch.c: implement the protocol

        * qemud/driver.[ch]: add stubs for the driver

        * qemud/internal.h: add struct qemud_network

        * src/qemu_internal.c: add a virtual networks driver