Commit 80533ca2 forgot to think about offline cpus.  When a node
cpu is offline, then its topology/ subdirectory is not present,
leading to spurious error messages leaked to the user such as:

libvir:  error : cannot open /home/dummy/libvirt/tests/nodeinfodata/linux-nodeinfo-sysfs-test-6/node/node0/cpu7/topology/physical_package_id: No such file or directory

Fix that, as well as test it; the test data is gathered from a
machine with one NUMA node, hyperthreading, and with 2 of the
8 cpus offline.

* src/nodeinfo.c (virNodeParseNode): Don't parse topology of
offline cpus.
* tests/nodeinfotest.c (mymain): Run new test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-6*: New data.

This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>

Test filling of nodeinfo structure if /sys/devices/system/node does not
exist. (Based on dump from a real machine)

This patch adds test data that describe a machine that has two physical
processors that don't share same core id's on their cores. On this data
the "virsh nodeinfo" reported that the machine had 10 cores per socket
while the processor had only 8. (Before fixing nodeinfo gathering code).

This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.

This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b,
ac9dd4a6. (Those changes in nodeinfo.c
are efectively reverted by this patch).

This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.

This patch adds test data needed by the new way node information will be
gathered. This patch adds symlinks to cpu cores to their corresponding
node directory.

Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:

if (strstr(def->emulator, "kvm")) {
    def->virtType = VIR_DOMAIN_VIRT_KVM;
    def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}

Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features

The extra data need to be added to one test case

Introducing the attribute vendor_id to force the CPUID instruction
in a kvm guest to return the specified vendor.

The ignore_value macro is used across libvirt. This patch includes it in
the internal header and cleans all other includes.

qemu 1.1 features a xhci controller,
this patch adds support for it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Right now, the only way to get at the contents of a virBuffer is
to destroy it.  But there are cases in my upcoming patches where
peeking at the contents makes life easier.  I suppose this does
open up the potential for bad code to dereference a stale pointer,
by disregarding the docs that the return value is invalid on the
next virBuf operation, but such is life.

* src/util/buf.h (virBufferCurrentContent): New declaration.
* src/util/buf.c (virBufferCurrentContent): Implement it.
* src/libvirt_private.syms (buf.h): Export it.
* tests/virbuftest.c (testBufAutoIndent): Test it.

This fixes the build on 32bit systems which otherwise fails with:

virnetmessagetest.c: In function 'testMessageHeaderEncode':
virnetmessagetest.c:75:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'long unsigned int' [-Werror=format]

Currently, we are allocating buffer for RPC messages statically.
This is not such pain when RPC limits are small. However, if we want
ever to increase those limits, we need to allocate buffer dynamically,
based on RPC message len (= the first 4 bytes). Therefore we will
decrease our mem usage in most cases and still be flexible enough in
corner cases.

QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device

I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.

It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0

The first parameter is "tty". It sould be "parport".

If I launch qemu with -chardev parport,... it works as expected.

I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:

https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.htmlSigned-off-by: NEric Blake <eblake@redhat.com>

It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early.  This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt.  The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.

Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.

* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.

Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.

This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.

Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:

  CCLD   networkxml2argvtest

*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!

Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.

Based on a suggestion by Daniel P. Berrange.

* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.

Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files).  However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:

  CCLD   libvirt_driver_qemu.la

*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects  libvirt_qemu_probes.o is not portable!

This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.

* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.

* tests/Makefile.am (valgrind): Use libtool's ability to bypass
libtool wrappers when running valgrind.

With the switch to modules by default, I was getting super long
test output:

TEST: /home/remote/eblake/libvirt/tests/.libs/lt-interfacexml2xmltest

compared to the former:

TEST: interfacexml2xmltest

* tests/testutils.c (virtTestMain): Trim off libtool goop.

To ensure all symbols used by loadable driver modules are
exported in libvirt.so, add a test suite that simply loads
each driver in turn

* tests/Makefile.am, tests/virdrivermoduletest.c: Add
  a test case for loading drivers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it

* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
  instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
  src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
  in probes.d
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist

* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
  to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
  by test suite

I'm tired of writing:

bool sep = false;
while (...) {
    if (sep)
       virBufferAddChar(buf, ',');
    sep = true;
    virBufferAdd(buf, str);
}

This makes it easier, allowing one to write:

while (...)
    virBufferAsprintf(buf, "%s,", str);
virBufferTrim(buf, ",", -1);

to trim any remaining comma.

* src/util/buf.h (virBufferTrim): Declare.
* src/util/buf.c (virBufferTrim): New function.
* tests/virbuftest.c (testBufTrim): Test it.

This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.

On the command line iptables supports ipset using

iptables ... -m set --match-set <ipset name> <flags> -j ...

where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:

iptables -A INPUT -m set --match-set test src,src -j ACCEPT

Since ipset management is quite complex, the idea was to leave ipset 
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.

Using XML to describe an ipset in an nwfilter rule would then look as
follows:

  <rule action='accept' direction='in'>
    <all ipset='test' ipsetflags='src,src'/>
  </rule>

The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.

FYI: Here is the man page for ipset:

https://ipset.netfilter.org/ipset.man.html

Regards,
    Stefan

Test new codec type element.

Make it obvious why we need Osier's patch in commit 10d9038b
to fix NUMA parsing of an AMD machine with two cores sharing
a socket id.

* tests/nodeinfotest.c (linuxTestCompareFiles): Enhance the test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-*-output.txt: Update.

To allow the security drivers to apply different configuration
information per hypervisor, pass the virtualization driver name
into the security manager constructor.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.

The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.

The uhci1, uhci2, uhci3 companion controllers for ehci1 must
have a master start port set. Since this value is predictable
we should set it automatically if the app does not supply it

Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.

* src/qemu/qemu_command.c: Special case handling of USB2 controllers
  to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
  tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
  test to cover automatic slot assignment

Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.

This results in output like:

2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
  stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

"Instead of developing one CPU with 12 cores, the Magny Cours is
actually two 6 core “Bulldozer” CPUs combined in to one package"

I.e, each package has two NUMA nodes, and the two numa nodes share
the same core ID set (0-6), which means parsing the cores number
from sysfs doesn't work in this case.

And the wrong CPU number could cause three problems for libvirt:

1) performance lost

  A domain without "cpuset" or "placement='auto'" (to drive numad)
specified will be only pinned to part of the CPUs.

2) domain can be started

  If a domain uses numad, and the advisory nodeset returned from
numad contains node which exceeds the range of wrong total CPU
number. The domain will fail to start, as the bitmask passed to
sched_setaffinity could be fully filled with zero.

3) wrong CPU number affects lots of stuffs.

  E.g. for command "virsh vcpuinfo", "virsh vcpupin", it will always
output with the truncated CPU list.

For more details:

https://www.redhat.com/archives/libvir-list/2012-May/msg00607.html

This patch is to fix the problem by parsing /proc/cpuinfo to get
the value of field "cpu cores", and use it as nodeinfo->cores if
it's greater than the cores number from sysfs.