In 2074ef6c and c56cdf25 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Commit id 'bc444666' added a check if the returned data
buffer had an error, but failed to adjust the event from
VIR_DOMAIN_BLOCK_JOB_COMPLETED to VIR_DOMAIN_BLOCK_JOB_FAILED
in order to propagate an error such as "File descriptor in bad
state" that may be returned from QEMU when both @offset and
@len are set to 0 such as is the case when performing an async
block job read on a read only filesystem.
Signed-off-by: NJie Wang <wangjie88@huawei.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Use the DEVICE_MISSING error code when helpers fail to find
the requested device. This makes it easier for consumers to
key off the error code rather than the error message.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Modify OPERATION_FAILED and INTERNAL_ERROR error codes to
use DEVICE_MISSING instead for failures associated with the
inability to find the device. This makes it easier for consumers
to key off the error code rather than the error message.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add new error code to be able to allow consumers (such as Nova) to be
able to key of a specific error code rather than needing to search the
error message."
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

More proper/detail error messages updated.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The XDR_CFLAGS variable is needed when the XDR headers are not
part of the stock glibc install
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that we can open connections to the secondary drivers on demand,
there is no need to pass a virConnectPtr into all the backend
functions.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Instead of passing around a virConnectPtr object, just open a connection
to the nodedev driver at time of use. Opening connections on demand will
be beneficial when the nodedev driver is in a separate daemon. It also
solves the problem that a number of callers just pass in a NULL
connection today which prevents nodedev lookup working at all.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Instead of passing around a virConnectPtr object, just open a connection
to the secret driver at time of use. Opening connections on demand will
be beneficial when the secret driver is in a separate daemon. It also
solves the problem that a number of callers just pass in a NULL
connection today which prevents secret lookup working at all.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Various parts of libvirt will want to open connections to secondary
drivers. The right URI to use will depend on the context, so rather than
duplicating that logic in various places, use some helper APIs. This
will also make it easier for us to later pre-open/cache connections to
avoid repeated opening & closing the same connectiong during autostart.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the secret
driver, by defining secret:///system and secret:///session URIs
and registering a fake hypervisor driver that supports them.

The hypervisor drivers can now directly open a secret driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the nodedev
driver, by defining nodedev:///system and nodedev:///session URIs
and registering a fake hypervisor driver that supports them.

The hypervisor drivers can now directly open a nodedev driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the interface
driver, by defining interface:///system and interface:///session URIs
and registering a fake hypervisor driver that supports them.

The hypervisor drivers can now directly open a interface driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the storage
driver, by defining a nwfilter:///system URI and registering a fake
hypervisor driver that supports it.

The hypervisor drivers can now directly open a nwfilter driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the network
driver, by defining network:///system and network:///session URIs
and registering a fake hypervisor driver that supports them.

The hypervisor drivers can now directly open a network driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Allow the possibility of opening a connection to only the storage
driver, by defining storage:///system and storage:///session URIs
and registering a fake hypervisor driver that supports them.

The hypervisor drivers can now directly open a storage driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Some platforms/toolchains will complain about casting
sockaddr_storage to sockaddr_un because it breaks strict
aliasing rule

../../src/util/virutil.c: In function 'virGetUNIXSocketPath':
../../src/util/virutil.c:2005: error: dereferencing pointer 'un' does break strict-aliasing rules [-Wstrict-aliasing]

Change the code to use a union, in the same way that the
virsocketaddr.h header does.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The _() macro was not terminated and an argument needs to be marked as
unused.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that the controller model is updated during post parse callback,
this code no longer needs to fetch the model based on the capabilities
and can just return the model directly if the controller is found.

Removal of @qemuCaps cascades through various callers which are now
updated to not pass the capabilities.

Now that post parse processing handles setting the SCSI controller
model, there's no need to call qemuDomainGetSCSIControllerModel to
get the "default controller" when building the command line controller
string or when assigning the spaprvio address since the controller
model value will already be filled in.

When an implicit controller is added, the model is defined as -1
(IOW: undefined). So, if an implicit SCSI controller was added,
can set the model to the default value if the underlying hypervisor
supports it.

During post parse processing, let's force setting the controller
model to default value if not already set for defined controllers
(e.g. the non implicit ones).

If we're going to add a controller to the domain, let's set the
default SCSI model value if we cannot find another SCSI controller
already present.

NB: Requires updating the live output test data since the model
will now be formatted.

Rename and rework qemuDomainSetSCSIControllerModel since we're
really not setting the SCSI controller model. Instead the code
is either returning the existing SCSI controller model value, the
default value based on the capabilities, or -1 with the error set.

Rather than repeat multiple steps in order to find the SCSI
controller model, let's combine them into one helper that will
return either the model from the definition or the default
model based on the capabilities.

This patch adds an extra check/error that the controller
that's being found actually exists. This just clarifies that
the error was because the controller doesn't exist rather
than the more generic error that we were unable to determine
the model from qemuDomainSetSCSIControllerModel when a -1
was passed in and the capabilities were unable to find one.

As it turns out virDomainDeviceFindControllerModel was only ever
called for SCSI controllers using VIR_DOMAIN_CONTROLLER_TYPE_SCSI
as a parameter.

So rename to virDomainDeviceFindSCSIController and rather than
return a model, let's return a virDomainControllerDefPtr to let
the caller reference whatever it wants.

Rather than one function serving two purposes, let's split out the
else condition which is checking whether the model can be used
during command line building based on the capabilities.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When starting an LXC container, the /dev entries are created
under temp root (/var/run/libvirt/lxc/$name.dev), relabelled and
then the root is pivoted. However, when it comes to USB devices
which keep path to the device in the structure we need a way to
override the default /dev/usb/... path because we want to work
with the one under temp root. That's what @vroot argument is for
in virUSBDeviceNew. However, what is being passed there is:

  vroot = /var/run/libvirt/lxc/lxc_0.dev/bus/usb

Therefore, constructed path is wrong:

  dev->path = //var/run/libvirt/lxc/lxc_0.dev/bus/usb//dev/bus/usb/002/002
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Add a virtlockd-admin-sock can serves the admin protocol for the virtlockd
daemon and define a virtlockd:///{system,session}  URI scheme for
connecting to it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a virtlogd-admin-sock can serves the admin protocol for the virtlogd
daemon and define a virtlogd:///{system,session}  URI scheme for
connecting to it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

With the current code it is neccessary to call

  virNetDaemonNewPostExecRestart()

and then for each server that needs restarting you are supposed
to call

  virNetDaemonAddSeverPostExecRestart()

This is fine if there's only ever one server, but as soon as you
have two servers it is impossible to use this design. The code
has no idea which servers were recorded in the JSON state doc,
nor in which order the hash table serialized its keys.

So this patch changes things so that we only call

  virNetDaemonNewPostExecRestart()

passing in a callback, which is invoked once for each server
found int he JSON state doc.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It is not possible to blindly call virNetDaemonGetServer()
because in a post-exec restart scenario, some servers may
not exist and this method will pollute the error logs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The server name and client data callbacks need to be non-NULL or the
system will crash at various times. This is particularly bad when some
of the crashes only occur post-exec restart.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virNetServer class is passing a pointer to itself to the
virNetServerClient as a 'void *' pointer. This is presumably due to fact
that the virnetserverclient.h file doesn't see the virNetServerPtr
typedef. The typedef is easily movable though, which lets us get
typesafe parameter passing, removing the confusion of passing two
distinct 'void *' pointers to one method.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>