The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.

It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow finer-grained control of vcpu state using guest agent this API
can be used to individually set the state of the vCPU.

This will allow to better control NUMA enabled guests and/or test
various vCPU configurations.

Add a rather universal API implemented via typed params that will allow
to query the guest agent for the state and possibly other aspects of
guest vcpus.

Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.

Caused by 3b6c8185.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add remote support for perf event.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-3-git-send-email-qiaowei.ren@intel.com

To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: NCristian Klein <cristiklein@gmail.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

That causes shadowing errors on older compilers.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Also, among with this new API new ACL that restricts rename
capability is invented too.
Signed-off-by: NTomas Meszaros <exo@tty.sk>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For setting passwords of users inside the domain.

With the VIR_DOMAIN_PASSWORD_ENCRYPTED flag set, the password
is assumed to be already encrypted by the method required
by the guest OS.

https://bugzilla.redhat.com/show_bug.cgi?id=1174177

Add remote support for the add/delete IOThread API's

The counterpart to VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED.

https://bugzilla.redhat.com/show_bug.cgi?id=1206114

While it returns info about multiple threads, the version
without the plural is easier to read.

Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

daemon/remote.c
   * Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses

src/remote/remote_driver.c
   * Define remoteDomainInterfaceAddresses

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
   * Define structs remote_domain_ip_addr, remote_domain_interface,
     remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
   * Introduce upper bounds (to handle DoS attacks):
     REMOTE_DOMAIN_INTERFACE_MAX = 2048
     REMOTE_DOMAIN_IP_ADDR_MAX = 2048
     Restrictions on the maximum number of aliases per interface were
     removed after kernel v2.0, and theoretically, at present, there
     are no upper limits on number of interfaces per virtual machine
     and on the number of IP addresses per interface.

src/remote_protocol-structs
   * New structs added
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

Implement the remote plumbing.

Implement the remote plumbing for virDomainGetIOThreadsInfo
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.

Add daemon and driver code to (de-)serialize virDomainFSInfo.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.

A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves.  However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Fairly straightforward - I got lucky that the generated functions
worked out of the box :)

* src/remote/remote_protocol.x (remote_domain_block_copy_args):
New struct.
(REMOTE_PROC_DOMAIN_BLOCK_COPY): New RPC.
* src/remote/remote_driver.c (remote_driver): Wire it up.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement the remote driver support for shuffling the domain stats
around.

The API should expose the information contained in virDomainCapsPtr.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.

Variables/fields named 'interface' clash with system
header symbols on some platforms.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Implement RPC calls for virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC

daemon/remote.c
   * Define remoteSerializeNetworkDHCPLeases,
            remoteDispatchNetworkGetDHCPLeases
   * Define remoteDispatchNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_driver.c
   * Define remoteNetworkGetDHCPLeases
   * Define remoteNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES
   * Define structs remote_network_dhcp_leases, remote_network_get_dhcp_leases_args,
                    remote_network_get_dhcp_leases_ret
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES_FOR_MAC
   * Define structs remote_network_dhcp_leases_for_mac, remote_network_get_dhcp_leases_for_mac_args,
                    remote_network_get_dhcp_leases_for_mac_ret

src/remote_protocol-structs
   * New structs added

src/rpc/gendispatch.pl
   * Add exception (s/Dhcp/DHCP) for auto-generating names of the remote functions
     in daemon/remote_dispatch.h

The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

New rules are added in fixup_name in gendispatch.pl to keep the name
FSFreeze and FSThaw. This adds a new ACL permission 'fs_freeze',
which is also applied to VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.

Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.

As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.

* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>