- 20 5月, 2016 19 次提交
-
-
由 Ján Tomko 提交于
It was only called for QEMUs without QEMU_CAPS_DEVICE, which we no longer support.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Name the validation function distinctively since it's called in the parser. Later patches will add function that will validate disk definitions that are invalid but need to be parsed to avoid losing domains.
-
由 John Ferlan 提交于
Seems recent versions of Coverity have (mostly) resolved the issue using ternary operations in VIR_FREE (and now VIR_DISPOSE*) macros. So let's just remove it and if necessary handle one off issues as the arise.
-
由 John Ferlan 提交于
Rather than return 0/-1 and/or a pointer to some memory, adjust the helper to just return the allocated structure or NULL on failure. Adjust the callers in order to handle that Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Since the callers only ever expect 0 or -1, let's just return that directly Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
If we get to the error: label and clear out the *virtual_functions[] pointers and then return w/ error to the caller - the caller has it's own cleanup of the same array in the out: label which is keyed off the value of num_virt_fns, which wasn't reset to 0 in the called function leading to a possible problem. Just clear the value (found by Coverity) Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Cole Robinson 提交于
It's overkill here, we can use virGetLast* instead
-
由 Jovanka Gulicoska 提交于
Convert to virGetLastErrorMessage() in the rest of the code
-
由 Jovanka Gulicoska 提交于
Use virGetLastErrorMessage() instead of virGetLastError() in tests
-
由 Michal Privoznik 提交于
While introducing virtestmock.la, I've forgotten to add '\' at the end of one line leaving our Makefile.am mangled. Fortunately, the only thing that comes after is '$(NULL)' so nothing is terribly broken. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Katerina Koukiou 提交于
Use the recently added job functions and unlock the virDomainObj while performing the respective modify operation. This commit affects lxcDomain{DestroyFlags, Reboot, SetBlkioParameters, SetMemoryParameters, SetMetadata, SetSchedulerParameterFlags, ShutdownFlags} Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
This commit affects lxcDomain{InterfaceStats, MemoryStats, BlockStats, BlockStatsFlags} Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
This operation isn't necessarily time consuming, but need to wait in the queue of modify jobs. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
These operations aren't necessarily time consuming, but need to wait in the queue of modify jobs. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
These operations aren't necessarily time consuming, but need to wait in the queue of modify jobs. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
Large balloon operation can be time consuming. Use the recently added job functions and unlock the virDomainObj while ballooning. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
Creating a large domain could potentially be time consuming. Use the recently added job functions and unlock the virDomainObj while the create operation is in progress. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
由 Katerina Koukiou 提交于
Follows the pattern used in the libxl driver for managing multiple, simultaneous jobs within the driver. Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>
-
- 19 5月, 2016 21 次提交
-
-
由 Peter Krempa 提交于
If the stats for a block device can't be acquired from qemu we've fallen back to loading them from the file on the disk in libvirt. If qemu is not cooperating due to being stuck on an inaccessible NFS share we would then attempt to read the files and get stuck too with the VM object locked. All other APIs would eventually get stuck waiting on the VM lock. Avoid this problem by skipping the block stats if the VM is online but the monitor did not provide any stats. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337073
-
由 Peter Krempa 提交于
Extract the fallback path that reloads the stats from disk into a separate function.
-
由 Peter Krempa 提交于
'abbreviated' was true if 'stats' were NULL
-
由 Qiaowei Ren 提交于
Some Intel processor families (e.g. the Intel Xeon processor E5 v3 family) introduced some RDT (Resource Director Technology) features to monitor or control shared resource. Among these features, MBM (Memory Bandwidth Monitoring), which is build on the CMT (Cache Monitoring Technology) infrastructure, provides OS/VMM a way to monitor bandwidth from one level of cache to another. With current perf framework, this patch adds support to perf event for MBM. Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
-
由 Ján Tomko 提交于
Split out parsing of most of the <os> subelements into a separate function.
-
由 Nikolay Shirokovskiy 提交于
vz puts uuids into curly braces. Simply introduce new contstant to reflect this and get rid of magic +2 in code. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Peer to peer migration is implemented just as in managed case. Basically it is copy paste from managed case but with all the branches that are not applied to vz removed. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
The newest version of migration protocol - version 3 with parameters is implemented. Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML is in VZ_MIGRATION_PARAMETERS for technical onyl reasons. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
This session uuid acts as authN token for different multihost vz operations one of which is migration. Unfortunately we can't get it from server at any time thus we need to save it at login. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Erik Skultety 提交于
Finally wire-up virAdmServer{Get,Set}ClientLimits APIs into virt-admin client. Update the virt-admin's man page accordingly. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
Opposite operation to virAdmServerGetClientLimits. Understandably though, setting values for current number of clients connected or still waiting for authentication does not make sense, since changes to these values are event dependent, i.e. a client connects - counter is increased. Thus only the limits to maximum clients connected and waiting for authentication can be set. Should a request for other controls to be set arrive (provided such a setting will be first introduced to the config), the set of configuration controls can be later expanded (thanks to typed params). This patch also introduces a constraint that the maximum number of clients waiting for authentication has to be less than the overall maximum number of clients connected and any attempt to violate this constraint will be denied. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
Enable retrieval of the number of maximum clients connected to all sockets combined, as well as the number of maximum clients waiting for authentication, in order to be successfully connected. These are the attributes configurable through libvirtd.conf, however, it could be handy to not only know values for these limits, but also the values for the current number of clients connected and number of clients currently waiting for authentication which are changing dynamically. This API does both, retrieves the limits as well as the current dynamic values. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
In order for typed params validation to pass on daemon side, we should encourage users to use our exported constants with typed params to diminish to avoid any potential problems related to argument validity. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
Add some trivial getters for client related attributes to virnetserver before any admin method can be introduced. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Ján Tomko 提交于
QEMU needs access to the /dev/dri/render* device for virgl to work. Allow access to all /dev/dri/* devices for domains with <video> <model type='virtio' heads='1' primary='yes'> <acceleration accel3d='yes'/> </model> </video> https://bugzilla.redhat.com/show_bug.cgi?id=1337290
-
由 Cole Robinson 提交于
All qemu versions we support have QEMU_CAPS_DEVICE, so checking for it is redundant. Remove the usage. The code diff isn't clear, but all that code is just inindented with no other change. Test cases that hit qemuDomainAssignAddresses but don't have infrastructure for specifying qemuCaps values see lots of churn, since now PCI addresses are in the XML output.
-
由 Cole Robinson 提交于
Upcoming patches are going to make the disk portion of these test cases fail. In order to make it work, we would need to extend the qemuargv2xml test infrastructure to handle qemuCaps. This is worthwhile to do at some point but isn't critical. Instead just drop the offending portion, which isn't even the target of the test cases anyways
-
由 Cole Robinson 提交于
hotplug APIs with the AFFECT_CONFIG flag are essentially replicating 'insert <device> into XML document, and redefine XML'. Thinking of it this way, it's natural that we call virDomainDefPostParse after manually editing the XML here. Not only does doing so allow us to drop a bunch of open coded calls to qemuDomainAssignAddresses, but it also means we are going through the standard channels for XML validation and potentially catching errors in user submitted XML.
-
由 Cole Robinson 提交于
This wires up qemuDomainAssignAddresses into the new virDomainDefAssignAddressesCallback, so it's always triggered via virDomainDefPostParse. We are essentially doing this already with open coded calls sprinkled about. qemu argv parse output changes slightly since previously it wasn't hitting qemuDomainAssignAddresses.
-
由 Cole Robinson 提交于
This will be called at the end of virDomainDefPostParse to allow hypervisor drivers to fill in device addresses.
-