Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainSetVcpuAffinities from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules.  For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainAutoCoreDump from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules.  For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainManagedSavePath from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainEventQueue from libxl_driver to libxl_domain for
use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL.  These fields were left unset by the libxl
driver, causing libxl to ignore any user settings.  E.g. with

  <graphics type='vnc' port='5950'/>

port would be ignored and QEMU would instead be invoked with

  -vnc 127.0.0.1:0,to=99

Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDavid Kiarie <davidkiarie4@gmail.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxl driver reads /proc/xen/capabilities to see if it
is on a Dom0 kernel. If that file does not even exist though,
an error is logged. Check for the file existance before trying
to read its contents to avoid the log message.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:

  <seclabel type='dynamic' model='selinux' relabel='yes'/>

Erroring with:

  $ sudo virsh domxml-to-native qemu-argv f
  error: XML error: security label is missing

All drivers are fixed, but only qemu was tested.

As soon as any guest mounts xenfs to /proc/xen, there is a capabilities
file in that directory. However it returns nothing when reading from it.
Change the test to actually check the contents of the file.

BugLink: http://bugs.launchpad.net/bugs/1248025Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Add pci passthrough to libxl driver, support attach-device, detach-device and
start a vm with pci hostdev specified.

Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as
stub driver.

Supporting sexpr in connectDomainXMLFromNative in the libxl driver
adds flexibility for users importing legacy Xen configuration into
libvirt.  E.g. this patch allows importing previous xend-managed
domains from /var/lib/xend/domains/<dom-uuid>/config.sxp into the
libvirt libxl driver.

Only tested on v7 but the v8 equivalent seems pretty obvious.

XEN_CAP_REGEX already accepts more than it should (e.g. x86_64p or x86_32be)
but I have stuck with the existing pattern.

With this I can create a guest from:
  <domain type='xen'>
    <name>libvirt-test</name>
    <uuid>6343998e-9eda-11e3-98f6-77252a7d02f3</uuid>
    <memory>393216</memory>
    <currentMemory>393216</currentMemory>
    <vcpu>1</vcpu>
    <os>
      <type arch='armv7l' machine='xenpv'>linux</type>
      <kernel>/boot/vmlinuz-arm-native</kernel>
      <cmdline>console=hvc0 earlyprintk debug root=/dev/xvda1</cmdline>
    </os>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
      <disk type='block' device='disk'>
        <source dev='/dev/marilith-n0/debian-disk'/>
        <target dev='xvda1'/>
      </disk>
      <interface type='bridge'>
        <mac address='8e:a7:8e:3c:f4:f6'/>
        <source bridge='xenbr0'/>
      </interface>
    </devices>
  </domain>

Using virsh create and I can destroy it too.

Currently virsh console fails with:
  Connected to domain libvirt-test
  Escape character is ^]
  error: internal error: cannot find character device <null>

I haven't investigated yet.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The shutdown handler may restart a domain when handling a reboot
event or when <on_*> is set to 'restart'.  Restarting consists of
calling libxlVmCleanup followed by libxlVmStart.  libxlVmStart will
emit a VIR_DOMAIN_EVENT_STARTED event, but the SHUTDOWN event is
not emitted until exiting the shutdown handler, after the STARTED
event.

This patch changes the logic a bit to queue the event at the start
of the shutdown action, ensuring it is queued before any subsequent
events that may be generated while executing the shutdown action.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support for coredump-{destroy,restart} actions of <on_crash> event.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The libxl driver was ignoring the <on_*> domain event configuration,
causing e.g. a domain to be rebooted even when on_reboot is set to
destroy.

This patch honors the <on_*> configuration in the shutdown event
handler.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Emit libvirt shutdown event when receiving LIBXL_SHUTDOWN_REASON_POWEROFF
event from libxl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit e4a0e900 missed calling libxlVmCleanupJob in the shutdown
handler when processing a reboot event.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Modify operation that needs to wait in the queue of modify jobs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Setting autostart is a modify operation that needs to wait in the
queue of modify jobs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Dumping a domain's core can take considerable time.  Use the
recently added job functions and unlock the virDomainObj while
dumping core.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Saving domain memory and cpu state can take considerable time.
Use the recently added job functions and unlock the virDomainObj
while saving the domain.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When explicitly destroying a domain (libxlDomainDestroyFlags), or
handling an out-of-band domain shutdown event, cleanup the domain
in the context of a job.  Introduce libxlVmCleanupJob to wrap
libxlVmCleanup in a job block.

These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Large balloon operation can be time consuming.  Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Creating a large domain could potentially be time consuming.  Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Follows the pattern used in the QEMU driver for managing multiple,
simultaneous jobs within the driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This function, which only has five call sites, simply calls
libxl_domain_destroy and libxlVmCleanup.  Call those functions
directly at the call sites, allowing more control over how a
domain is destroyed and cleaned up.  This patch maintains the
existing semantic, leaving changes to a subsequent patch.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Once a domain has reached the shutdown state, set its ID to -1.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Update the function's comment, which was missed when removing use of
the driver lock everywhere.

A small fix for the possiblitiy of jumping to an error path before
registering for domain events, preventing receiving important ones
like shutdown and death.

libxlDomEventsRegister better reflects its purpose: register for
domain events from libxl.