To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Suggested-by: NDaniel P. Berrangé <berrange@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.

https://bugzilla.redhat.com/show_bug.cgi?id=1291851Signed-off-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1566416

Commit id 'fe2af45b' added output for logical_block_size and
num_blocks for both removeable and fixed storage, but did not
update the nodedev capability causing virt-xml-validate to fail.
It's listed as optional only because it only prints if the
sizes are > 0. For a CDROM drive the values won't be formatted.

Update the nodedevxml2xmltest in order to output the values
for storage based on the logic from udevProcessRemoveableMedia
and udevProcessSD with respect to the logical_blocksize and
num_blocks calculations.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1572491

Commit id '02129b7c' added a single pagesElem for slightly
different purposes. One usage was an output for host page size
listing and the other for NUMA supported page sizes. For the
former, only the pages unit and size are formatted, while for
the latter the pages unit, size, and availability data is formatted.

The virt-xml-validate would fail because it expected something
extra in the host page size output. So split up pagesElem a bit
and create pagesHost and pagesNuma for the differences.

Modify some capabilityschemadata output to have the output - even
though the results may not be realistic with respect to the
original incarnation of the data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1572491

Commit id 'd2440f3b' added printing the <microcode> for the
capabilities, but didn't update the capabilities schema.

While at it, update capabilityschemadata for caps-test2
and caps-test3 to output some value for validation.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

Commit id '0eced74f' added vzmigr as a valid option for
virCapabilitiesAddHostMigrateTransport, but didn't update
the capabilities schema resulting in possible virt-xml-validate
failure.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1572491

Commit id 'b3fd95e3' added rdma as a valid option for
virCapabilitiesAddHostMigrateTransport, but didn't update
the capabilities schema resulting in possible virt-xml-validate
failure.

While at it, update the capabilityschemadata for caps-qemu-kvm
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

Commit id 'e4938ce2' changed the esx_driver to use 'vpxmigr'
instead of esx for virCapabilitiesAddHostMigrateTransport, so
update the capabilities to allow virt-xml-validate to pass and
update the test to use the newer name.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

Commit id '1dac5fbb' removed xenmigr as a capability option
for virCapabilitiesAddHostMigrateTransport but didn't update
the schema resulting in possible failure for virt-xml-validate.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1572491

Commit id '78661cb1' added a physical output, but failed to update
the schema resulting in a failure from virt-xml-validate.

While at it - update the storagevolschemadata for the output.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>

Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.

This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.

Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6
and ich9 sound devices, which only advertises a line-out in the guest.
This has been available in QEMU since 0.14.
Signed-off-by: NFilip Alac <filipalac@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.

Drop the attribute and adjust the code accordingly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.

Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:

  <reservations enabled='yes' managed='no'>
    <source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
  </reservations>

If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:

https://www.redhat.com/archives/libvir-list/2017-November/msg01005.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Report <features><vmcoreinfo supported='yes'/> if the guest config
accepts <features><vmcoreinfo state='on'/>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.

Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.

For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:

  <tpm model='tpm-crb'>
    <backend type='passthrough'>
      <device path='/dev/tpm0'/>
    </backend>
  </tpm>

Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Panic device has 2 optional sub-elements - <alias> and <address> the
order of which should be interchangeable in the XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1456165Signed-off-by: NErik Skultety <eskultet@redhat.com>

The attribute can be used to disable ROM loading completely
for a device.

This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The new controller will not yet be used automatically by
libvirt, but at this point it's already possible to configure
a guest to use it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

QEMU is the preferred spelling used on QEMU website.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.

access inside VM (for example)
Linux:   /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
          wirhin Windows PowerShell.

As an example, add the following to the guest XML

    <chassis>
      <entry name='manufacturer'>Dell Inc.</entry>
      <entry name='version'>2.12</entry>
      <entry name='serial'>65X0XF2</entry>
      <entry name='asset'>40000101</entry>
      <entry name='sku'>Type3Sku1</entry>
    </chassis>
Signed-off-by: NZhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.

As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like

    <oemStrings>
      <entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
      <entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
    </oemStrings>

use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The contents of a <rule> are a choice of exactly one union member. The
RNG schema, however, was allowing an arbitrary number of instances of every
union member at once.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxlxml2domconfigdata directory was not covered in the RNG schema
tests. This hid a few bugs in both the libxl XML files and the RNG
schema itself.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.

This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.

We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.

We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.

This commit is best viewed with 'git show -w'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.

In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.

Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.

The device is arm/x86 only for now (targets that support fw_cfg+dma).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.

Below is an example of a 4 node setup:

  <cpu>
    <numa>
      <cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='10'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='31'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='10'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='31'/>
        </distances>
      </cell>
      <cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='31'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='10'/>
          <sibling id='3' value='21'/>
        </distances>
      <cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='31'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='10'/>
        </distances>
      </cell>
    </numa>
  </cpu>

A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s).  For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.

Valid distance values are '10 <= value <= 255'.  A distance value of 10
represents the distance to the node itself.  A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.

When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.

If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>