This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The function now does not return an error so we can drop it fully.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In few places we have the following code pattern:

  int ret;
  ... /* @ret is not accessed here */
  ret = f(...);
  return ret;

This pattern can be written less verbose:

  ...
  return f(...);

This patch was generated with following coccinelle spatch:

  @@
  type T;
  constant C;
  expression f;
  identifier ret;
  @@
  -T ret = C;
   ... when != ret
  -ret = f;
  -return ret;
  +return f;

Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The callers expect '1' on a successful probe,
so return 1 just like VIR_STRDUP would.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Replace all the occurrences of
  ignore_value(VIR_STRDUP(a, b));
with
  a = g_strdup(b);
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.

Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.

The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1755303

With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).

When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.

The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.

Resolves: https://bugzilla.redhat.com/1558934Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.

When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.

QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.

Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.

In privileged libvirtd this ends up locking

   /var/run/libvirt/lxc/driver.pid

In unprivileged libvirtd this ends up locking

  /run/user/$UID/libvirt/lxc/run/driver.pid

NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This function is calling public API virNetworkLookupByName()
which resets the error. Therefore, if
virDomainNetReleaseActualDevice() is used in cleanup path it
actually resets the original error that got us jump into
'cleanup' label.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit 2f5e6502.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Our coding style specifies that only negative values are considered as
error. Check for return value of virDomainDiskInsert() properly,
following the style. Not that the function can now return anything other
than 0 or -1, but it just triggers my OCD.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The call to resolve the actual network type will turn any NICs with
type=network into one of the other types. Thus there should be no need
to handle type=network in later switch() statements jumping off the
actual type.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.

The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.

This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This code originates from:

commit d0aa10fd
Author: Daniel P. Berrange <berrange@redhat.com>
Date:   Tue Mar 3 12:03:44 2009 +0000

    QEMU security driver usage for sVirt support (James Morris, Dan Walsh, Daniel Berrange)

Originally in the qemudDomainGetSecurityLabel function. It doesn't
appear to have done anything useful back then either. The other two
instances look like copy+paste
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

If shutting down a container via setting the runlevel fails, the
control jumps right onto endjob label and doesn't even try
sending the signal. If flags allow it, we should try both
methods.
Signed-off-by: NMaxim Kozin <kolomaxes@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1685151

This reverts commit cefb97fb.

The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.

Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag.  Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).

In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If the container is really a simple one (init is just bash and
the whole root is passed through) then virDomainReboot and
virDomainShutdown will talk to the actual init within the host.
Therefore, 'virsh shutdown $dom' will result in shutting down the
host. True, at that point the container is shut down too but
looks a bit harsh to me.

The solution is to check if the init inside the container is or
is not the same as the init running on the host.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

So far the virInitctlSetRunLevel() is fully automatic. It finds
the correct fifo to use to talk to the init and it will set the
desired runlevel. Well, callers (so far there is just one) will
need to inspect the fifo a bit just before the runlevel is set.
Therefore, expose the internal list of fifos and also allow
caller to explicitly use one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Not that it would matter because LXC driver doesn't differentiate
the job types so far, but nevertheless the Destroy() should grab
LXC_JOB_DESTROY.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Now that we have replacement in the form of the image labeling function
we can drop the unnecessary functions by replacing all callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The use of 'lxc://' was mistakenly broken in:

  commit 4c8574c8
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Wed Mar 28 12:49:29 2018 +0100

    driver: ensure NULL URI isn't passed to drivers with whitelisted URIs

Allow it again for historical compatibility.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 3e26b476.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Remove the "!params" check from the condition since it's possible
someone could pass a non NULL value there, but a 0 for the nparams
and thus continue on.  The external API only checks if @nparams is
non-zero, then check for NULL @params.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.

The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So we originally disabled LXC driver when libvirtd is running
under valgrind back in 05436ab7 (which dates to beginning of
2009) as it was causing valgrind to crash. It's not the case
anymore. Valgrind works with LXC happily.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>