We've been running into a lot of situations where
virGetHostname() is returning "localhost", where a plain
gethostname() would have returned the correct thing.  This
is because virGetHostname() is *always* trying to canonicalize
the name returned from gethostname(), even when it doesn't
have to.

This patch changes virGetHostname so that if the value returned
from gethostname() is already FQDN or localhost, it returns
that string directly.  If the value returned from gethostname()
is a shortened hostname, then we try to canonicalize it.  If
that succeeds, we returned the canonicalized hostname.  If
that fails, and/or returns "localhost", then we just return
the original string we got from gethostname() and hope for
the best.

Note that after this patch it is up to clients to check whether
"localhost" is an allowed return value.  The only place
where it's currently not is in qemu migration.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/util/macvtap.c: (associatePortProfileId)
(disassociatePortProfileId): Move inside HAVE_MACVTAP
conditional.
Reported by Eduardo Otubo.

This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)

Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:

https://bugzilla.redhat.com/show_bug.cgi?id=494005
https://bugzilla.redhat.com/show_bug.cgi?id=593565

Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.

v2: Leading // must be preserved, properly sanitize path=/, sanitize
    away /./ -> /

v3: Properly handle starting ./ and ending /.

v4: Drop all '.' handling, just sanitize / for now.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

* src/util/bitmap.h (includes): Placate cppi.

V2:
  - Move bitmap impl to src/util/bitmap.[ch]
  - Use CHAR_BIT instead of explicit '8'
  - Use size_t instead of unsigned int
  - Fix calculation of bitmap size in virBitmapAlloc
  - Ensure bit is within range of map in the set, clear, and get
    operations
  - Use bool in virBitmapGetBit
  - Add virBitmapFree to free-like funcs in cfg.mk

V3:
  - Check for overflow in virBitmapAlloc
  - Fix copy and paste bug in virBitmapAlloc
  - Use size_t in prototypes
  - Add ATTRIBUTE_NONNULL in prototypes where appropriate
    and remove NULL check from impl

V4:
  - Add ATTRIBUTE_RETURN_CHECK in prototypes where appropriate.

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

Run this:
  git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'

Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer.  Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.

* src/util/uuid.c (virUUIDGenerate): Remove _(...) manually.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

* src/util/ebtables.c (ebtablesAddRemoveRule): Don't skip
va_end(args) on an error path.
* src/util/iptables.c (iptablesAddRemoveRule): Identical change.

* cfg.mk (useless_free_options): Add many vir*Free* function names,
and then remove the useless if-before-free tests exposed by running
make syntax-check.
* src/conf/interface_conf.c (virInterfaceDefFree): Remove useless "if".
(virInterfaceAssignDef): Likewise.
* src/conf/network_conf.c (virNetworkAssignDef): Likewise.
* src/conf/storage_conf.c (virStoragePoolObjAssignDef): Likewise.
* src/node_device/node_device_hal.c (dev_create): Likewise.
* src/security/virt-aa-helper.c (vahDeinit): Likewise.
* src/test/test_driver.c (testNodeDeviceCreateXML): Likewise.
* src/util/conf.c (virConfSetValue): Likewise.

virFileResolveLink was returning a positive value on error,
thus confusing callers that assumed failure was < 0.  The
confusion is further evidenced by callers that would have
ended up calling virReportSystemError with a negative value
instead of a valid errno.

Fixes Red Hat BZ #591363.

* src/util/util.c (virFileResolveLink): Live up to documentation.
* src/qemu/qemu_security_dac.c
(qemuSecurityDACRestoreSecurityFileLabel): Adjust callers.
* src/security/security_selinux.c
(SELinuxRestoreSecurityFileLabel): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.

v2: Use intended F_OK. Drop devdir param, just check dev->path for device
existence.

v3: Use virReportSystemError, include dev->path in error message.

* configure.ac: Check for <linux/magic.h>.
* src/util/storage_file.c: Include <linux/magic.h> only if present.
Linux kernels prior to 2.6.19 lacked it.
[__linux__] (NFS_SUPER_MAGIC): Define if not already defined.

When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem

* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
  method virStorageFileIsSharedFS() to determine if a file is
  on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
  disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
  src/security/security_selinux.c, src/security/security_driver.h,
  src/security/security_apparmor.c: Add ability to skip disk
  restore step for files on shared filesystems.

* src/util/macvtap.c (delMacvtap): Fix documentation.

81 patches to gnulib, picks up several new syntax checks.

* .gnulib: Update to latest.
* .x-sc_prohibit_always_true_header_tests: New file.
* bootstrap.conf (gnulib_modules): Add sched.
* src/util/processinfo.c (includes): <sched.h> is now guaranteed.
* src/network/bridge_driver.c (includes): Drop useless
<strings.h>.
* src/openvz/openvz_conf.c (includes): Likewise.
* src/openvz/openvz_driver.c (includes): Likewise.
* src/phyp/phyp_driver.c (includes): Likewise.
* src/qemu/qemu_driver.c (includes): Likewise.
* src/uml/uml_driver.c (includes): Likewise.

* configure.ac: Drop sys/wait.h check.
* src/libvirt.c (includes): Use header unconditionally.
* src/remote/remote_driver.c (includes): Likewise.
* src/storage/storage_backend.c (includes): Likewise.
* src/util/ebtables.c (includes): Likewise.
* src/util/hooks.c (includes): Likewise.
* src/util/iptables.c (includes): Likewise.
* src/util/util.c (includes): Likewise.

Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions.  Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.

* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks.  Optimize function
checks.  Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.

Detected by clang.  POSIX requires that the second argument to
va_start be the name of the last variable; and in some implementations,
passing *path instead of path would dereference bogus memory instead
of pulling arguments off the stack.

* src/util/util.c (virBuildPathInternal): Use correct argument to
va_start.

Add an empty body for virCondWaitUntil and move virPipeReadUntilEOF
out of the '#ifndef WIN32' block, because it compiles fine with MinGW
in combination with gnulib.

Necessary on cygwin, where uid_t and gid_t are 4-byte long rather
than int, causing gcc -Wformat warnings.

* src/util/util.c (virFileOperationNoFork, virDirCreateNoFork)
(virFileOperation, virDirCreate, virGetUserEnt): Cast uid_t and
gid_t before passing to printf.
* .gitignore: Ignore Windows executables.

* src/util/cgroup.c: free temporal path string before breaking loop

* src/util/dnsmasq.c (dnsmasqReload): Mingw lacks kill, but is not
running a dnsmasq daemon either.

Also do some indentation clean up.

* src/util/util.c: as it's used for checking things like .iso suffixes

* src/qemu/qemu_driver.c: Implementation of virDomainGetBlockInfo
* src/util/storage_file.h: Add DEV_BSIZE
* src/storage/storage_backend.c: Remove DEV_BSIZE

It implements an idea to save dhcp hosts' macaddr vs. ipaddr mappings to
static file and make dnsmasq loading it with "--dhcp-hostsfile" option,
originally suggested by Dan, and can address the problem that too
many "--dhcp-host" args hitting ARG_MAX limit

* src/util/dnsmasq.h src/util/dnsmasq.c: adds the 2 new files

Cygwin has mntent.h but lacks getmntent_r. Update preprocessor
checks to catch this combination.

Based on a warning from coverity.  The safe* functions
guarantee complete transactions on success, but don't guarantee
freedom from failure.

* src/util/util.h (saferead, safewrite, safezero): Add
ATTRIBUTE_RETURN_CHECK.
* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Ignore
some failures.
(remoteIOReadBuffer): Adjust error messages on read failure.
* daemon/event.c (virEventHandleWakeup): Ignore read failure.

Regression introduced in commit 62170b99.

* src/util/memory.h: Placate cppi, and fit 80 columns.

* This patch implements a memory allocator to obtain memory for
  structures whose last member is a variable length array.  C99 refers
  to these variable length objects as structs containing flexible
  array members.
* Fixed macro parentheses per Eric Blake

* src/util/conf.c (virConfParseValue): Add an sa_assert.

* src/util/util.c (virGetHostnameLocalhost): Add an sa_assert
to tell clang it's ok to dereference "info" after a non-failing
getaddrinfo call.

Changes from v1 to v2:
- changed function name prefixes to 'iface' from previous 'Iface'

- Further to make make syntax-check pass:
 - indentation fix in interface.h
 - added entry to POTFILES.in

I am consolidating network interface related functions used in nwfilter
and macvtap code in utils/interface.c. All function names are prefixed
with 'Iface'. The following functions are now available through
interface.h:

int ifaceCtrl(const char *name, bool up);
int ifaceUp(const char *name);
int ifaceDown(const char *name);

int ifaceCheck(bool reportError, const char *ifname,
               const unsigned char *macaddr, int ifindex);

int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex);

I added 'int ifindex' as parameter to ifaceCheck to the original
function and modified the code accordingly.