Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

For TPM passthrough device support create command line parameters like:

-tpmdev passthrough,id=tpm-tpm0,path=/dev/tpm0,cancel-path=/sys/class/misc/tpm0/device/cancel -device tpm-tis,tpmdev=tpm-tpm0,id=tpm0
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Some refactoring for virDomainChrSourceDef type of devices so
we can use common code.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

When a VM with a TPM passthrough device is started, the audit daemon
logs the following type of message:

type=VIRT_RESOURCE msg=audit(1365170222.460:3378): pid=16382 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm resrc=dev reason=start vm="TPM-PT" uuid=a4d7cd22-da89-3094-6212-079a48a309a1 device="/dev/tpm0" exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=success'
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Parse the domain XML with TPM passthrough support.
The TPM passthrough XML may look like this:

    <tpm model='tpm-tis'>
      <backend type='passthrough'>
        <device path='/dev/tpm0'/>
      </backend>
    </tpm>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Implement helper function to create the TPM's sysfs cancel file.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Supported TPM passthrough XML may look as follows:

    <tpm model='tpm-tis'>
      <backend type='passthrough'>
        <device path='/dev/tpm0'/>
      </backend>
    </tpm>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Probe for QEMU's QMP TPM support by querying the lists of
supported TPM models (query-tpm-models) and backend types
(query-tpm-types). 

The setting of the capability flags following the strings
returned from the commands above is only provided in the
patch where domain_conf.c gets TPM support due to dependencies
on functions only introduced there. 
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

This patch adds the ability to configure non-contiguous boot orders on boot
devices. This allows unplugging devices that have boot order specified without
breaking migration.

The new code now uses a slightly less memory efficient approach to store the
boot order fields in a hashtable instead of a bitmap.

Typically when you get EOF on a stream, poll will return
POLLIN|POLLHUP at the same time. Thus when we deal with
stream reads, if we see EOF during the read, we can then
clear the VIR_STREAM_EVENT_HANGUP & VIR_STREAM_EVENT_ERROR
event bits.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

When migrating a domain with disk images stored locally (and using
storage migration), we should not complain about unsafe migration no
matter what cache policy is used for that disk.

Explicitly state that using incomplete XML definition snippets for hot-management
commands may have unexpected results due to autogenerating values for some of
the fields if they aren't specified explicitly.

Instead of always using HMP use the QMP send-key command introduced in qemu 1.3.

As of 76d9f656 we are supporting two new modes: initctl and signal.
However, these are missing in help listing.

https://bugzilla.redhat.com/show_bug.cgi?id=920441

Currently, we are discarding listen attribute from qemu cookie even though
we strive to gather it. This result in not so cool bug: if user have
different networks, one for management/migration, and one for VNC/SPICE we
pass incorrect host to the qemu in client_migrate_info. What we actually
pass is remote hostname, while we should be passing remote listen address.
It doesn't matter as long as these two are the same, but they don't need
necessary to be like that.

If the path part of connection URI is not present, cfg is used
unitialized.

https://bugzilla.redhat.com/show_bug.cgi?id=950855

Members of struct virPCIDevice are changed together.

 ==5306== 8 bytes in 1 blocks are definitely lost in loss record 24 of 277
 ==5306==    at 0x4C28B2F: calloc (vg_replace_malloc.c:593)
 ==5306==    by 0x5293CAF: virAllocN (viralloc.c:152)
 ==5306==    by 0x52DFEAE: virXPathNodeSet (virxml.c:611)
 ==5306==    by 0x5313DD9: virNetworkDefParseXML (network_conf.c:1408)
 ==5306==    by 0x53170F6: virNetworkObjUpdateParseFile (network_conf.c:2031)
 ==5306==    by 0x131DA63C: networkStartup (bridge_driver.c:279)
 ==5306==    by 0x53481DF: virStateInitialize (libvirt.c:822)
 ==5306==    by 0x40DF44: daemonRunStateInit (libvirtd.c:877)
 ==5306==    by 0x52D2FF5: virThreadHelper (virthreadpthread.c:161)
 ==5306==    by 0x5D00C52: start_thread (in /usr/lib64/libpthread-2.17.so)
 ==5306==    by 0x6410ECC: clone (in /usr/lib64/libc-2.17.so)

This patch fixes crash of the daemon that happens due to the following race
condition:

Let's have two threads in the libvirtd daemon's qemu driver:
A - thread executing undefine on the same domain
B - thread executing a API call to get information about a domain

Assume following serialization of operations done by the threads:
1) A has the lock on the domain object and is executing some code prior to
   virDomainObjListRemove()
2) B takes the lock on the domain object list, looks up the domain object
pointer and blocks in the attempt to lock the domain object as A is holding the
lock
3) A reaches virDomainObjListRemove() and unlocks the lock on the domain object
4) A blocks on the attempt to get the domain list lock
5) B is able to lock the domain object now and unlocks the domain list
6) A is now able to lock the domain list, and sheds the last reference on the
domain object, this triggers the freeing function.
6) B starts executing the code on the pointer that is being freed
7) The libvirtd daemon crashes while attempting to access invalid pointer in
thread B.

This patch fixes the race by acquiring a reference on the domain object before
unlocking it in virDomainObjListRemove() and re-locks the object prior to
removing and freeing it. This ensures that no thread holds a lock on the domain
object at the time it is removed from the list, and that doing a list lookup
will never find a domain that is about to vanish.

This is a minimal fix of the problem, but a better solution will be to switch to
full reference counting for domain objects.

Kerberos uses 'primary' or 'key' files (principals), not 'abstract
ideal' or 'rule' files (principles).  Reported by Jason Meinzer.

Reflow a paragraph to fit in 80 columns in the process.

* docs/auth.html.in: Fix spelling.

While this update doesn't address any reported problems in libvirt,
doing a post-release update to latest gnulib makes it easier to
stay in sync with best upstream practices.

* .gnulib: Update to latest.
* bootstrap: Resynchronize.

Commit 9a3ff01d (which was ACKed at
the end of January, but for some reason didn't get pushed until during
the 1.0.4 freeze) fixed the logic in virPCIGetVirtualFunctions().
Unfortunately, a typo in the fix (replacing VIR_REALLOC_N with
VIR_ALLOC_N during code movement) caused not only a memory leak, but
also resulted in most of the elements of the result array being
replaced with NULL. virNetDevGetVirtualFunctions() assumed (and I think
rightly so) that virPCIGetVirtualFunctions() wouldn't return any NULL
elements in the array, so it ended up segfaulting.

This was found when attempting to use a virtual network with an
auto-created pool of SRIOV VFs, e.g.:

    <forward mode='hostdev' managed='yes'>
      <pf dev='eth4'/>
    </forward>

(the pool of PCI addresses is discovered by calling
virNetDevGetVirtualFunctions() on the PF dev).