Item redundancy, some forgotten extra blank lines, etc.
Signed-off-by: NZhiPeng Lu <luzhipeng@uniudc.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).

A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.

The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Update 'Device address' section to describe 'zpci' element and
its two attributes 'uid' and 'fid'.
Signed-off-by: NYi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>

Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>

Remove redundant leading whitespaces from "<td> on, off</td>".
Suggested-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>

Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Refactor schemas and virresctrl to support optional <cache> element
in <cachetune>.

Later, the monitor entry will be introduced and to be placed
under <cachetune>. Either cache entry or monitor entry is
an optional element of <cachetune>.

An cachetune has no <cache> element is taking the default resource
allocating policy defined in '/sys/fs/resctrl/schemata'.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NChris Venteicher <cventeic@redhat.com>

Specifically, list sub-elements and where they can be used. In addition,
describe supported machine types for Xen.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Commit bc6d3121 was far too terse when describing the new
elements, attributes, and allow values. Provide a few more
words to help describe.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.

The name is based on comments in qemu/hw/riscv/virt.c:

  RISC-V machine with 16550a UART and VirtIO MMIO

and in qemu/hw/char/serial.c:

  QEMU 16550A UART emulation

along with the output of dmesg in the guest:

  Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
    base_baud= 230400) is a 16550A
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.

Add XML formatter, parser, schema and docs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
  <cputune>
    ......
    <memorytune vcpus='0'>
      <node id='0' bandwidth='30'/>
    </memorytune>
  </cputune>

vpus      --- vpus subjected to this memory bandwidth.
id        --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Validate that the provided XML shmem name is not directory specific to "."  or
".." as well as ensure that there is no path separator '/' in the name.

https://bugzilla.redhat.com/show_bug.cgi?id=1192400Signed-off-by: NSimon Kobyda <skobyda@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Multiple cputune elements specified microseconds as the unit
without putting a space before the parenthesis.

There were also other occurrences.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Currently it reads:
Refer MDEV to create a mediated device on the host

...even though it resembles English, it's not a proper English.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').

This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

CPU is an acronym and should be written in uppercase
when part of plain text and not refering to an element.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Although the name of the element is not self-explanatory,
it's affecting only the vcpu threads.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 4d92d5 and 55ecda introduced the parameters but didn't update the docs.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Since libvirt 1.3.4, any RNG source is accepted for the 'random'
backend.  However, '/dev/urandom' is the _recommended_ source of
entropy. Therefore we should mention that in the docs.
Suggested-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NKashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert

Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Tested-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.

When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy.  This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG.  The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments.  Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here.  Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The default is actually `on` when `<smm/>` is specified.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:

    <tpm model='tpm-tis'>
      <backend type='emulator' version='2.0'/>
    </tpm>

The swtpm process now has --tpm2 as an additional parameter:

system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8  0.0 28364  3868 ?        Rs   11:13  13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid

The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:

 <tpm model='tpm-tis'>
   <backend type='emulator'/>
 </tpm>

The XML will currently only define a TPM 1.2.

Extend the documentation.

Add a test case testing the XML parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1544869Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.

Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.

This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's "a hard_limit", not "an hard_limit".  Probably that was just a typo.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>