Finishes starting a new domain launched by qemuProcessLaunch.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Once qemuProcessInit was called, qemuProcessLaunch will launch a new
QEMU process with stopped virtual CPUs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemuProcessStart is going to be split in three parts: qemuProcessInit,
qemuProcessLaunch, and qemuProcessFinish so that migration Prepare phase
can insert additional code in the process. qemuProcessStart will be a
small wrapper for all other callers.

qemuProcessInit prepares the domain up to the point when priv->qemuCaps
is initialized.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Only one panic device per model is allowed.

'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.

Panic device type used depends on 'model' attribute.

If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.

XML:
<devices>
  <panic model='hyperv'/>
</devices>

QEMU command line:
qemu -cpu <cpu_model>,hv_crash

Libvirt already has two types of panic devices - pvpanic and pSeries firmware.
This patch introduces the 'model' attribute and a new type of panic device.

'isa' model is for ISA pvpanic device.
'pseries' model is a default value for pSeries guests.
'hyperv' model is the new type. It's used for Hyper-V crash.

Schema and docs are updated for the new attribute.

This adds the qemu binaries as of 1.2.4 in Debian. It also removes a
duplicate sparc64 entry.

A PCI device may have the capability to setup virtual functions (VFs)
but have them currently all disabled. Prior to this patch, if that was
the case the the node device XML for the device wouldn't report any
virtual_functions capability.

With this patch, if a file called "sriov_totalvfs" is found in the
device's sysfs directory, its contents will be interpreted as a
decimal number, and that value will be reported as "maxCount" in a
capability element of the device's XML, e.g.:

   <capability type='virtual_functions' maxCount='7'/>

This will be reported regardless of whether or not any VFs are
currently enabled for the device.

NB: sriov_numvfs (the number of VFs currently active) is also
available in sysfs, but that value is implied by the number of items
in the list that is inside the capability element, so there is no
reason to explicitly provide it as an attribute.

sriov_totalvfs and sriov_numvfs are available in kernels at least as far
back as the 2.6.32 that is in RHEL6.7, but in the case that they
simply aren't there, libvirt will behave as it did prior to this patch
- no maxCount will be displayed, and the virtual_functions capability
will be absent from the device's XML when 0 VFs are enabled.

Report the maximum possible number of VFs for an SRIOV PF, like this:

   <capability type='virtual_functions' maxCount='7'>
      ...
   </capability>

I've just discovered that the virtual_functions and physical_functions
capabilities are not supported in the virNodeDeviceParse functions,
only in virNodeDeviceFormat (I suppose because they are only reported,
not set from XML). This should probably be remedied, but is less
immediately useful than the current patch.

The return value has non-obvious semantics. Document it.

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The checked predicate is a deduction from the following checks:

1) maximum cpu id is checked for every parsed <vcpusched> element
2) the resulting bitmaps are checked for overlaps
3) there has to be at least one cpu per <vcpusched>

From the above checks we can indeed deduce that if we have one
<vcpusched> element per CPU we will have at most 'maxvcpus' of them.

Drop the explicit check since it's redundant.

Now that new domains are started inside a QEMU_ASYNC_JOB_START job,
we need to pass it down to qemuProcessStartCPUs too.

This removes the warning:
qemuDomainObjEnterMonitorInternal:1750 : This thread seems to be the
async job owner; entering monitor without asking for a nested job is
dangerous

Introduced by commit 04c721f2, before that this code path was only
executed with QEMU_ASYNC_JOB_NONE.

(This code is not executed on migration, because qemuMigrationPrepareAny
 sets the VIR_QEMU_PROCESS_START_PAUSED flag.)

To simplify further refactors change the way the vcpu count is extracted
to use a temp variable rather than juggling with def->maxvcpus.

To simplify further refactors change the way the vcpu count is extracted
to use a temp variable rather than juggling with def.maxvcpus.

To simplify further refactors change the way the vcpu count is extracted
to use a temp variable rather than juggling with def->maxvcpus.

Use the helper that is necessary to fill out some values rather than
allocating it directly.

Signed-off-by: NJán Tomko <jtomko@redhat.com>

We do not have a pointer to the device here, just its source.

The domain definition is not needed in any of these functions.
Only pass it to qemuSetupChardevCgroup, which is used as a callback
for virDomainChrDefForeach.

Use the right type for passing virDomainObjPtr instead of
void* where possible.

Change CGroup to Cgroup to match other functions in the file.

like I440FX by moving the condition into qemuDomainMachineHasBuiltinIDE
and adding more machines.

Reference: http://bugs.debian.org/805189

https://bugzilla.redhat.com/show_bug.cgi?id=1282288

Rather than using just open on the path, allow for the possibility that
the path to be opened resides on an NFS root-squash target and was created
under a different uid/gid.

Without using virFileOpenAs an attempt to get the volume size data may fail
if the current user doesn't have permissions to read the volume, such as
would be the case if mode wasn't supplied in the volume XML and the default
VIR_STORAGE_DEFAULT_VOL_PERM_MODE (e.g. 0600) was used. Under this scenario
the owner/group is not root:root, thus this path run under root would fail
to open/read the volume.

NB: The virFileOpenAs code using OPEN_FORK will only work when the failure
is not EACESS/EPERM and the path resolves to a shared file system.

https://bugzilla.redhat.com/show_bug.cgi?id=1282288

Although commit id '77346f27' resolves part of the problem regarding creating
a qemu-img image in an NFS root-squash environment, it really didn't fix the
entire problem. Unfortunately it only masked the problem. It seems qemu-img
must open/create the image using 0644, which if used by target.perms would
result in the chmod not being called since the mode desired and set match.

Although qemu-img could conceivably ignore the mode when creating, libvirt
has more knowledge of the environment and can make the adjustment to the
mode far more easily by using virFileOpenAs with VIR_FILE_OPEN_FORCE_MODE.
If that's successful, then we know on return the file will have the right
owner and mode, so we can declare success

Unlike other architectures, ppc64 domains need to lock memory
even when VFIO is not used.

Change qemuDomainRequiresMlock() to reflect this fact.

The amount of memory a ppc64 domain might need to lock is different
than that of a equally-sized x86 domain, so we need to check the
domain's architecture and act accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273480

The function is used everywhere else to check whether the locked
memory limit should be set / updated, and it should be used here
as well.

Moreover, qemuDomainGetMlockLimitBytes() expects the hostdev to
have already been added to the domain definition, but we only do
that at the end of qemuDomainAttachHostPCIDevice(). Work around
the issue by adding the hostdev before adjusting the locked memory
limit and removing it immediately afterwards.

This removes a duplication of the logic used to decide whether
the memory locking limit should be set.

This can be useful for debugging.

Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit id '08600de3' changed the prototype to reduce an argument, but
didn't adjust the ATTRIBUTE_NONNULL(11) to (10)

Diff from v1.
1. Add virCheckFlags() call in vzDomainReboot

In virtuozzo we support only en-us keymap for VMs and containers.
If keymap is specified than check that it's en-us, otherwise
show error message.

Remembering to call qemuMonitorSetDomainLog in the right paths before
calling qemuProcessStop is annoying and easy to forget. And I already
forgot to do so in commit v1.2.8-52-g03890605: logfd may be leaked if
QEMU process dies between Prepare and Finish migration phases.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Every caller setting migrateFrom already sets
VIR_QEMU_PROCESS_START_PAUSED flag anyway.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemuProcessMakeDir is used for creating a per-domain directory in a
given parent directory.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>