maint: this branch is now dead

Upstream is no longer willing to backport patches to a branch
this old.  If you disagree with the policy, please volunteer
to become the branch maintainer on libvir-list@redhat.com
Signed-off-by: NEric Blake <eblake@redhat.com>

.dir-locals.el

-(
- (c-mode . (
-            (c-file-style . "K&R")
-            (indent-tabs-mode . nil)
-            (c-indent-level . 4)
-            (c-basic-offset . 4)
-            ))
- (html-mode . (
-	       (indent-tabs-mode . nil)
-	       ))
- (sh-mode . (
-	     (indent-tabs-mode . nil)
-	     ))
- (nxml-mode . (
-	       (indent-tabs-mode . nil)
-	       ))
- )

.gnulib @ dbd91449

-Subproject commit dbd914496c99c52220e5f5ba4121d6cb55fb3beb

.mailmap

-# 'git shortlog --help' and look for mailmap for the format of each line
-
-# Email consolidation:
-# <Preferred address in AUTHORS> <other alias used by same author>
-
-<amy.griffis@hp.com> <aron.griffis@hp.com>
-<bozzolan@gmail.com> <redshift@gmx.com>
-<charles_duffy@messageone.com> <charles@dyfis.net>
-<dfj@redhat.com> <dfj@dfj.bne.redhat.com>
-<eblake@redhat.com> <ebb9@byu.net>
-<gdolley@arpnetworks.com> <gdolley@ucla.edu>
-<gerhard.stenzel@de.ibm.com> <gstenzel@linux.vnet.ibm.com>
-<jamie@canonical.com> <jamie@ubuntu.com>
-<laine@redhat.com> <laine@laine.org>
-<meyering@redhat.com> <jim@meyering.net>
-<socketpair@gmail.com> <socketpair gmail com>
-<soren@linux2go.dk> <soren@ubuntu.com>
-<jfehlig@suse.com> <jfehlig@novell.com>
-<jfehlig@suse.com> <jfehlig@linux-ypgk.site>
-<jclift@redhat.com> <justin@salasaga.org>
-<berrange@redhat.com> <dan@berrange.com>
-<soren@linux2go.dk> <soren@canonical.com>
-<cfergeau@redhat.com> <teuf@gnome.org>
-<wency@cn.fujitsu.com> <wency cn fujitsu com>
-<cardoe@cardoe.com> <cardoe@gentoo.org>
-<fsimonce@redhat.com> <federico.simoncelli@gmail.com>
-<marcandre.lureau@redhat.com> <marcandre.lureau@gmail.com>
-<supriyak@linux.vnet.ibm.com> <supriyak@in.ibm.com>
-
-# Name consolidation:
-# Preferred author spelling <preferred email>
-Alex Jia <ajia@redhat.com>

AUTHORS

-   libvirt Authors
-   ===============
-
-The libvirt project was initiated by:
-
-  Daniel Veillard      <veillard@redhat.com> or <daniel@veillard.com>
-
-The primary maintainers and people with commit access rights:
-
-  Daniel Veillard      <veillard@redhat.com>
-  Daniel Berrange      <berrange@redhat.com>
-  Richard W.M. Jones   <rjones@redhat.com>
-  Mark McLoughlin      <markmc@redhat.com>
-  Anthony Liguori      <aliguori@us.ibm.com>
-  Jim Meyering         <meyering@redhat.com>
-  Jim Fehlig           <jfehlig@suse.com>
-  Chris Lalancette     <clalance@redhat.com>
-  Cole Robinson        <crobinso@redhat.com>
-  Guido Günther        <agx@sigxcpu.org>
-  John Levon           <john.levon@sun.com>
-  Matthias Bolte       <matthias.bolte@googlemail.com>
-  Jiří Denemark        <jdenemar@redhat.com>
-  Dave Allan           <dallan@redhat.com>
-  Laine Stump          <laine@redhat.com>
-  Stefan Berger        <stefanb@us.ibm.com>
-  Eric Blake           <eblake@redhat.com>
-  Justin Clift         <jclift@redhat.com>
-  Osier Yang           <jyang@redhat.com>
-  Wen Congyang         <wency@cn.fujitsu.com>
-  Michal Prívozník     <mprivozn@redhat.com>
-
-Previous maintainers:
-  Karel Zak            <kzak@redhat.com>
-  Atsushi SAKAI        <sakaia@jp.fujitsu.com>
-  Dave Leskovec        <dlesko@linux.vnet.ibm.com>
-  Dan Smith            <danms@us.ibm.com>
-
-Patches have also been contributed by:
-
-  David Lutterkort     <dlutter@redhat.com>
-  Andrew Puch          <apuch@redhat.com>
-  Philippe Berthault   <philippe.berthault@Bull.net>
-  Hugh Brock           <hbrock@redhat.com>
-  Michel Ponceau       <michel.ponceau@bull.net>
-  Jeremy Katz          <katzj@redhat.com>
-  Pete Vetere          <pvetere@redhat.com>
-  Kazuki Mizushima     <mizushima.kazuk@jp.fujitsu.com>
-  Saori Fukuta         <fukuta.saori@jp.fujitsu.com>
-  Tatsuro Enokura      <fj7716hz@aa.jp.fujitsu.com>
-  Takahashi Tomohiro   <takatom@jp.fujitsu.com>
-  Nobuhiro Itou        <fj0873gn@aa.jp.fujitsu.com>
-  Masayuki Sunou       <fj1826dm@aa.jp.fujitsu.com>
-  Mark Johnson         <johnson.nh@gmail.com>
-  Christian Ehrhardt   <ehrhardt@linux.vnet.ibm.com>
-  Shuveb Hussain       <shuveb@binarykarma.com>
-  Jim Paris            <jim@jtan.com>
-  Daniel Hokka Zakrisson <daniel@hozac.com>
-  Mads Chr. Olesen     <shiyee@shiyee.dk>
-  Anton Protopopov     <aspsk2@gmail.com>
-  Stefan de Konink     <dekonink@kinkrsoftware.nl>
-  Kaitlin Rupert       <kaitlin@linux.vnet.ibm.com>
-  Evgeniy Sokolov      <evg@openvz.org>
-  David Lively         <dlively@virtualiron.com>
-  Charles Duffy        <Charles_Duffy@messageone.com>
-  Nguyen Anh Quynh     <aquynh@gmail.com>
-  James Morris         <jmorris@namei.org>
-  Chris Wright         <chrisw@redhat.com>
-  Ben Guthro           <ben.guthro@gmail.com>
-  Shigeki Sakamoto     <fj0588di@aa.jp.fujitsu.com>
-  Gerd von Egidy       <lists@egidy.de>
-  Itamar Heim          <iheim@redhat.com>
-  Markus Armbruster    <armbru@redhat.com>
-  Ryota Ozaki          <ozaki.ryota@gmail.com>
-  James Morris         <jmorris@namei.org>
-  Daniel J Walsh       <dwalsh@redhat.com>
-  Maximilian Wilhelm   <max@rfc2324.org>
-  Pritesh Kothari      <Pritesh.Kothari@Sun.COM>
-  Amit Shah            <amit.shah@redhat.com>
-  Florian Vichot       <florian.vichot@diateam.net>
-  Takahashi Tomohiro   <takatom@jp.fujitsu.com>
-  Serge E. Hallyn      <serue@us.ibm.com>
-  Soren Hansen         <soren@linux2go.dk>
-  Abel Míguez Rodríguez<amiguezr@pdi.ucm.es>
-  Doug Goldstein       <cardoe@cardoe.com>
-  Javier Fontan        <jfontan@gmail.com>
-  Federico Simoncelli  <fsimonce@redhat.com>
-  Amy Griffis          <amy.griffis@hp.com>
-  Henrik Persson E     <henrik.e.persson@ericsson.com>
-  Satoru SATOH         <satoru.satoh@gmail.com>
-  Paolo Bonzini        <pbonzini@redhat.com>
-  Miloslav Trmač       <mitr@redhat.com>
-  Jamie Strandboge     <jamie@canonical.com>
-  Gerhard Stenzel      <gerhard.stenzel@de.ibm.com>
-  Matthew Booth        <mbooth@redhat.com>
-  Diego Elio Pettenò   <flameeyes@gmail.com>
-  Adam Litke           <agl@us.ibm.com>
-  Steve Yarmie         <steve.yarmie@gmail.com>
-  Dan Kenigsberg       <danken@redhat.com>
-  Yuji NISHIDA         <nishidy@nict.go.jp>
-  Dustin Xiong         <x_k_123@hotmail.com>
-  Rolf Eike Beer       <eike@sf-mail.de>
-  Wolfgang Mauerer     <wolfgang.mauerer@siemens.com>
-  Philipp Hahn         <hahn@univention.de>
-  Ed Swierk            <eswierk@aristanetworks.com>
-  Paolo Smiraglia      <paolo.smiraglia@gmail.com>
-  Sharadha Prabhakar   <sharadha.prabhakar@citrix.com>
-  Chris Wong           <wongc-redhat@hoku.net>
-  Daniel Berteaud      <daniel@firewall-services.com>
-  Dustin Kirkland      <kirkland@canonical.com>
-  Luiz Capitulino      <lcapitulino@redhat.com>
-  Ryan Harper          <ryanh@us.ibm.com>
-  Spencer Shimko       <sshimko@tresys.com>
-  Marco Bozzolan       <bozzolan@gmail.com>
-  Alex Williamson      <alex.williamson@redhat.com>
-  Ersek Laszlo         <lacos@caesar.elte.hu>
-  Kenneth Nagin        <NAGIN@il.ibm.com>
-  Klaus Ethgen         <Klaus@Ethgen.de>
-  Bryan Kearney        <bkearney@redhat.com>
-  Darry L. Pierce      <dpierce@redhat.com>
-  David Jorm           <dfj@redhat.com>
-  Eduardo Otubo        <otubo@linux.vnet.ibm.com>
-  Garry Dolley         <gdolley@arpnetworks.com>
-  Harshavardhana       <harsha@gluster.com>
-  Jonas Eriksson       <jonas.j.eriksson@ericsson.com>
-  Jun Koi              <junkoi2004@gmail.com>
-  Olivier Fourdan      <ofourdan@redhat.com>
-  Ron Yorston          <rmy@tigress.co.uk>
-  Shahar Klein         <shaharklein@yahoo.com>
-  Taizo ITO            <taizo.ito@hde.co.jp>
-  Thomas Treutner      <thomas@scripty.at>
-  Jean-Baptiste Rouault <jean-baptiste.rouault@diateam.net>
-  Марк Коренберг       <socketpair@gmail.com>
-  Alan Pevec           <apevec@redhat.com>
-  Aurelien Rougemont   <beorn@binaries.fr>
-  Patrick Dignan       <pat_dignan@dell.com>
-  Serge Hallyn         <serge.hallyn@canonical.com>
-  Nikunj A. Dadhania   <nikunj@linux.vnet.ibm.com>
-  Lai Jiangshan        <laijs@cn.fujitsu.com>
-  Harsh Prateek Bora   <harsh@linux.vnet.ibm.com>
-  John Morrissey       <jwm@horde.net>
-  KAMEZAWA Hiroyuki    <kamezawa.hiroyu@jp.fujitsu.com>
-  Hu Tao               <hutao@cn.fujitsu.com>
-  Laurent Léonard      <laurent@open-minds.org>
-  MORITA Kazutaka      <morita.kazutaka@lab.ntt.co.jp>
-  Josh Durgin          <joshd@hq.newdream.net>
-  Roopa Prabhu         <roprabhu@cisco.com>
-  Paweł Krześniak      <pawel.krzesniak@gmail.com>
-  Kay Schubert         <kayegypt@web.de>
-  Marc-André Lureau    <marcandre.lureau@redhat.com>
-  Juerg Haefliger      <juerg.haefliger@hp.com>
-  Matthias Dahl        <mdvirt@designassembly.de>
-  Niels de Vos         <ndevos@redhat.com>
-  Davidlohr Bueso      <dave@gnu.org>
-  Alon Levy            <alevy@redhat.com>
-  Hero Phương          <herophuong93@gmail.com>
-  Zdenek Styblik       <stybla@turnovfree.net>
-  Gui Jianfeng         <guijianfeng@cn.fujitsu.com>
-  Michal Novotny       <minovotn@redhat.com>
-  Christophe Fergeau   <cfergeau@redhat.com>
-  Markus Groß          <gross@univention.de>
-  Phil Petty           <phpetty@cisco.com>
-  Taku Izumi           <izumi.taku@jp.fujitsu.com>
-  Minoru Usui          <usui@mxm.nes.nec.co.jp>
-  Tiziano Mueller      <dev-zero@gentoo.org>
-  Thibault VINCENT     <thibault.vincent@smartjog.com>
-  Naoya Horiguchi      <n-horiguchi@ah.jp.nec.com>
-  Jesse Cook           <code.crashenx@gmail.com>
-  Alexander Todorov    <atodorov@otb.bg>
-  Richard Laager       <rlaager@wiktel.com>
-  Mark Wu              <dwu@redhat.com>
-  Yufang Zhang         <yuzhang@redhat.com>
-  Supriya Kannery      <supriyak@linux.vnet.ibm.com>
-  Dirk Herrendoerfer   <d.herrendoerfer@herrendoerfer.name>
-  Taisuke Yamada       <tai@rakugaki.org>
-  Heath Petersen       <HeathPetersen@Kandre.com>
-  Neil Wilson          <neil@aldur.co.uk>
-  Ohad Levy            <ohadlevy@gmail.com>
-  Michael Chapman      <mike@very.puzzling.org>
-  Daniel Gollub        <gollub@b1-systems.de>
-  David S. Wang        <dwang2@cisco.com>
-  Ruben Kerkhof        <ruben@rubenkerkhof.com>
-  Scott Moser          <smoser@ubuntu.com>
-  Guannan Ren          <gren@redhat.com>
-  John Williams        <john.williams@petalogix.com>
-  Michael Santos       <michael.santos@gmail.com>
-  Alex Jia             <ajia@redhat.com>
-  Oskari Saarenmaa     <os@ohmu.fi>
-  Peter Krempa         <pkrempa@redhat.com>
-  Nan Zhang            <nzhang@redhat.com>
-  Wieland Hoffmann     <themineo@googlemail.com>
-  Douglas Schilling Landgraf <dougsland@redhat.com>
-  Tom Vijlbrief        <tom.vijlbrief@xs4all.nl>
-  Shradha Shah         <sshah@solarflare.com>
-  Steve Hodgson        <shodgson@solarflare.com>
-  Xu He Jie            <xuhj@linux.vnet.ibm.com>
-  Lei Li               <lilei@linux.vnet.ibm.com>
-  Matthias Witte       <witte@netzquadrat.de>
-  Radu Caragea         <dmns_serp@yahoo.com>
-  Stefan Bader         <stefan.bader@canonical.com>
-  Martin Kletzander    <mkletzan@redhat.com>
-
-  [....send patches to get your name here....]
-
-The libvirt Logo was designed by Diana Fong
-
--- End
-;; Local Variables:
-;; coding: utf-8
-;; End:

Makefile.am

-## Process this file with automake to produce Makefile.in
-
-## Copyright (C) 2005-2011 Red Hat, Inc.
-## See COPYING.LIB for the License of this software
-
-LCOV = lcov
-GENHTML = genhtml
-
-SUBDIRS = gnulib/lib include src daemon tools docs gnulib/tests \
-  python tests po examples/domain-events/events-c examples/hellolibvirt \
-  examples/dominfo examples/domsuspend examples/python examples/apparmor \
-  examples/xml/nwfilter examples/openauth examples/systemtap
-
-ACLOCAL_AMFLAGS = -I m4 -I gnulib/m4
-
-XML_EXAMPLES = \
-  $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/examples/xml/, \
-					test/*.xml storage/*.xml)))
-
-EXTRA_DIST = \
-  ChangeLog-old \
-  libvirt.spec libvirt.spec.in \
-  mingw32-libvirt.spec.in \
-  libvirt.pc.in \
-  autobuild.sh \
-  Makefile.nonreentrant \
-  autogen.sh \
-  cfg.mk \
-  examples/domain-events/events-python \
-  $(XML_EXAMPLES)
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libvirt.pc
-
-NEWS: $(top_srcdir)/docs/news.xsl $(top_srcdir)/docs/news.html.in
-	-@(if [ -x $(XSLTPROC) ] ; then				\
-	  $(XSLTPROC) --nonet $(top_srcdir)/docs/news.xsl	\
-	     $(top_srcdir)/docs/news.html.in			\
-	   | perl -0777 -pe 's/\n\n+$$/\n/'			\
-	   | perl -pe 's/[ \t]+$$//'				\
-	   > $@-t && mv $@-t $@ ; fi );
-
-$(top_srcdir)/HACKING: $(top_srcdir)/docs/hacking1.xsl $(top_srcdir)/docs/hacking2.xsl \
-                       $(top_srcdir)/docs/wrapstring.xsl $(top_srcdir)/docs/hacking.html.in
-	-@(if [ -x $(XSLTPROC) ] ; then \
-	   $(XSLTPROC) --nonet $(top_srcdir)/docs/hacking1.xsl $(top_srcdir)/docs/hacking.html.in | \
-	   $(XSLTPROC) --nonet $(top_srcdir)/docs/hacking2.xsl - \
-	   | perl -0777 -pe 's/\n\n+$$/\n/' \
-	   > $@-t && mv $@-t $@ ; fi );
-
-rpm: clean
-	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.gz)
-
-check-local: all tests
-
-tests:
-	@(cd docs/examples ; $(MAKE) MAKEFLAGS+=--silent tests)
-	@(if [ "$(pythondir)" != "" ] ; then cd python ; \
-	  $(MAKE) MAKEFLAGS+=--silent tests ; fi)
-
-cov: clean-cov
-	mkdir $(top_builddir)/coverage
-	$(LCOV) -c -o $(top_builddir)/coverage/libvirt.info.tmp \
-	  -d $(top_builddir)/src  -d $(top_builddir)/daemon \
-	  -d $(top_builddir)/tests
-	$(LCOV) -r $(top_builddir)/coverage/libvirt.info.tmp \
-	  -o $(top_builddir)/coverage/libvirt.info
-	rm $(top_builddir)/coverage/libvirt.info.tmp
-	$(GENHTML) --show-details -t "libvirt" -o $(top_builddir)/coverage \
-	  --legend $(top_builddir)/coverage/libvirt.info
-
-clean-cov:
-	rm -rf $(top_builddir)/coverage
-
-MAINTAINERCLEANFILES = .git-module-status
-
-# disable this check
-distuninstallcheck:
-
-dist-hook: gen-ChangeLog
-
-# Generate the ChangeLog file (with all entries since the switch to git)
-# and insert it into the directory we're about to use to create a tarball.
-gen_start_date = 2009-07-04
-.PHONY: gen-ChangeLog
-gen-ChangeLog:
-	if test -d .git; then					\
-	  $(top_srcdir)/build-aux/gitlog-to-changelog		\
-	    --since=$(gen_start_date) > $(distdir)/cl-t;	\
-	  rm -f $(distdir)/ChangeLog;				\
-	  mv $(distdir)/cl-t $(distdir)/ChangeLog;		\
-	fi

Makefile.nonreentrant

-
-#
-# Generated by running the following on Fedora 9:
-#
-#  nm -D --defined-only /lib/libc.so.6  \
-#      | grep '_r$' \
-#      | awk '{print $3}' \
-#      | grep -v __ \
-#      | grep -v qsort \ # Red herring since we don't need to pass extra args to qsort comparator
-#      | grep -v readdir \ # This is safe as long as each DIR * instance is only used by one thread
-#      | sort \
-#      | uniq \
-#      | sed -e 's/_r//'
-#
-# Also manually add in all inet_* functions some of which
-# are not threadsafe and do not have _r variants. They are
-# all deprecated in favour of getnameinfo/getaddrinfo
-#
-
-NON_REENTRANT =
-NON_REENTRANT += asctime
-NON_REENTRANT += ctime
-NON_REENTRANT += drand48
-NON_REENTRANT += ecvt
-NON_REENTRANT += erand48
-NON_REENTRANT += ether_aton
-NON_REENTRANT += ether_ntoa
-NON_REENTRANT += fcvt
-NON_REENTRANT += fgetgrent
-NON_REENTRANT += fgetpwent
-NON_REENTRANT += fgetspent
-NON_REENTRANT += getaliasbyname
-NON_REENTRANT += getaliasent
-NON_REENTRANT += getdate
-NON_REENTRANT += getgrent
-NON_REENTRANT += getgrgid
-NON_REENTRANT += getgrnam
-NON_REENTRANT += gethostbyaddr
-NON_REENTRANT += gethostbyname2
-NON_REENTRANT += gethostbyname
-NON_REENTRANT += gethostent
-NON_REENTRANT += getlogin
-NON_REENTRANT += getmntent
-NON_REENTRANT += getnetbyaddr
-NON_REENTRANT += getnetbyname
-NON_REENTRANT += getnetent
-NON_REENTRANT += getnetgrent
-NON_REENTRANT += getprotobyname
-NON_REENTRANT += getprotobynumber
-NON_REENTRANT += getprotoent
-NON_REENTRANT += getpwent
-NON_REENTRANT += getpwnam
-NON_REENTRANT += getpwuid
-NON_REENTRANT += getrpcbyname
-NON_REENTRANT += getrpcbynumber
-NON_REENTRANT += getrpcent
-NON_REENTRANT += getservbyname
-NON_REENTRANT += getservbyport
-NON_REENTRANT += getservent
-NON_REENTRANT += getspent
-NON_REENTRANT += getspnam
-NON_REENTRANT += getutent
-NON_REENTRANT += getutid
-NON_REENTRANT += getutline
-NON_REENTRANT += gmtime
-NON_REENTRANT += hcreate
-NON_REENTRANT += hdestroy
-NON_REENTRANT += hsearch
-NON_REENTRANT += initstate
-NON_REENTRANT += jrand48
-NON_REENTRANT += lcong48
-NON_REENTRANT += localtime
-NON_REENTRANT += lrand48
-NON_REENTRANT += mrand48
-NON_REENTRANT += nrand48
-NON_REENTRANT += ptsname
-NON_REENTRANT += qecvt
-NON_REENTRANT += qfcvt
-NON_REENTRANT += random
-NON_REENTRANT += rand
-NON_REENTRANT += seed48
-NON_REENTRANT += setstate
-NON_REENTRANT += sgetspent
-NON_REENTRANT += srand48
-NON_REENTRANT += srandom
-NON_REENTRANT += strerror
-NON_REENTRANT += strtok
-NON_REENTRANT += tmpnam
-NON_REENTRANT += ttyname
-NON_REENTRANT += inet_addr
-NON_REENTRANT += inet_aton
-NON_REENTRANT += inet_lnaof
-NON_REENTRANT += inet_makeaddr
-NON_REENTRANT += inet_netof
-NON_REENTRANT += inet_network
-NON_REENTRANT += inet_nsap_addr
-NON_REENTRANT += inet_nsap_ntoa
-NON_REENTRANT += inet_ntoa
-NON_REENTRANT += inet_ntop
-NON_REENTRANT += inet_pton

README

-
-         LibVirt : simple API for virtualization
-
-  Libvirt is a C toolkit to interact with the virtualization capabilities
-of recent versions of Linux (and other OSes). It is free software
-available under the GNU Lesser General Public License. Virtualization of
-the Linux Operating System means the ability to run multiple instances of
-Operating Systems concurrently on a single hardware system where the basic
-resources are driven by a Linux instance. The library aim at providing
-long term stable C API initially for the Xen paravirtualization but
-should be able to integrate other virtualization mechanisms if needed.
-
-Daniel Veillard <veillard@redhat.com>
+This branch is no longer maintained upstream.

README-hacking

--*- outline -*-
-
-These notes intend to help people working on the checked-out sources.
-These requirements do not apply when building from a distribution tarball.
-See also HACKING for more detailed libvirt contribution guidelines.
-
-* Requirements
-
-We've opted to keep only the highest-level sources in the GIT repository.
-This eases our maintenance burden, (fewer merges etc.), but imposes more
-requirements on anyone wishing to build from the just-checked-out sources.
-Note the requirements to build the released archive are much less and
-are just the requirements of the standard ./configure && make procedure.
-Specific development tools and versions will be checked for and listed by
-the bootstrap script.
-
-Valgrind <http://valgrind.org/> is also highly recommended, if
-Valgrind supports your architecture. See also README-valgrind.
-
-While building from a just-cloned source tree may require installing a
-few prerequisites, later, a plain `git pull && make' should be sufficient.
-
-* First GIT checkout
-
-You can get a copy of the source repository like this:
-
-        $ git clone git://libvirt.org/libvirt
-        $ cd libvirt
-
-As an optional step, if you already have a copy of the gnulib git
-repository on your hard drive, then you can use it as a reference to
-reduce download time and disk space requirements:
-
-        $ export GNULIB_SRCDIR=/path/to/gnulib
-
-The next step is to get all required pieces from gnulib,
-to run autoreconf, and to invoke ./configure:
-
-        $ ./autogen.sh
-
-And there you are!  Just
-
-        $ make
-        $ make check
-
-At this point, there should be no difference between your local copy,
-and the GIT master copy:
-
-        $ git diff
-
-should output no difference.
-
-Enjoy!
-
-Local Variables:
-indent-tabs-mode: nil
-End:

TODO

-         libvirt TODO list
-         =================
-
-The TODO list changes frequently, so is maintained online
-in the libvirt bugzilla
-
-  http://bugzilla.redhat.com/
-
-Search against
-
-    Product: Virtualization Tools
-  Component: libvirt
-    Subject: RFE
-
-Or browse dependent bugs under
-
-  https://bugzilla.redhat.com/show_bug.cgi?id=libvirtTodo
-
-Summarized reports automatically generated from bugzilla
-and provided online at
-
-  http://libvirt.org/todo.html

autobuild.sh

-#!/bin/sh
-
-set -e
-set -v
-
-# Make things clean.
-
-test -n "$1" && RESULTS=$1 || RESULTS=results.log
-: ${AUTOBUILD_INSTALL_ROOT=$HOME/builder}
-
-test -f Makefile && make -k distclean || :
-rm -rf coverage
-
-rm -rf build
-mkdir build
-cd build
-
-../autogen.sh --prefix="$AUTOBUILD_INSTALL_ROOT" \
-  --enable-test-coverage \
-  --enable-compile-warnings=error
-
-# If the MAKEFLAGS envvar does not yet include a -j option,
-# add -jN where N depends on the number of processors.
-case $MAKEFLAGS in
-  *-j*) ;;
-  *) n=$(getconf _NPROCESSORS_ONLN 2> /dev/null)
-    test "$n" -gt 0 || n=1
-    n=$(expr $n + 1)
-    MAKEFLAGS="$MAKEFLAGS -j$n"
-    export MAKEFLAGS
-    ;;
-esac
-
-make
-make install
-
-# set -o pipefail is a bashism; this use of exec is the POSIX alternative
-exec 3>&1
-st=$(
-  exec 4>&1 >&3
-  { make check syntax-check 2>&1 3>&- 4>&-; echo $? >&4; } | tee "$RESULTS"
-)
-exec 3>&-
-test "$st" = 0
-test -x /usr/bin/lcov && make cov
-
-rm -f *.tar.gz
-make dist
-
-if [ -n "$AUTOBUILD_COUNTER" ]; then
-  EXTRA_RELEASE=".auto$AUTOBUILD_COUNTER"
-else
-  NOW=`date +"%s"`
-  EXTRA_RELEASE=".$USER$NOW"
-fi
-
-if [ -f /usr/bin/rpmbuild ]; then
-  rpmbuild --nodeps \
-     --define "extra_release $EXTRA_RELEASE" \
-     --define "_sourcedir `pwd`" \
-     -ba --clean libvirt.spec
-fi
-
-if [ -x /usr/bin/i686-pc-mingw32-gcc ]; then
-  make distclean
-
-  PKG_CONFIG_PATH="$AUTOBUILD_INSTALL_ROOT/i686-pc-mingw32/sys-root/mingw/lib/pkgconfig" \
-  CC="i686-pc-mingw32-gcc" \
-  ../configure \
-    --build=$(uname -m)-pc-linux \
-    --host=i686-pc-mingw32 \
-    --prefix="$AUTOBUILD_INSTALL_ROOT/i686-pc-mingw32/sys-root/mingw" \
-    --enable-compile-warnings=error \
-    --without-sasl \
-    --without-avahi \
-    --without-polkit \
-    --without-python \
-    --without-xen \
-    --without-qemu \
-    --without-lxc \
-    --without-uml \
-    --without-vbox \
-    --without-openvz \
-    --without-phyp \
-    --without-netcf \
-    --without-audit \
-    --without-dtrace \
-    --without-libvirtd
-
-  make
-  make install
-
-  #set -o pipefail
-  #make check 2>&1 | tee "$RESULTS"
-
-  if [ -f /usr/bin/rpmbuild ]; then
-    rpmbuild --nodeps \
-       --define "extra_release $EXTRA_RELEASE" \
-       --define "_sourcedir `pwd`" \
-       -ba --clean mingw32-libvirt.spec
-  fi
-fi

autogen.sh

-#!/bin/sh
-# Run this to generate all the initial makefiles, etc.
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-THEDIR=`pwd`
-cd "$srcdir"
-
-test -f src/libvirt.c || {
-    echo "You must run this script in the top-level libvirt directory"
-    exit 1
-}
-
-
-EXTRA_ARGS=
-no_git=
-if test "x$1" = "x--no-git"; then
-  no_git=" $1"
-  shift
-fi
-if test "x$1" = "x--system"; then
-    shift
-    prefix=/usr
-    libdir=$prefix/lib
-    sysconfdir=/etc
-    localstatedir=/var
-    if [ -d /usr/lib64 ]; then
-      libdir=$prefix/lib64
-    fi
-    EXTRA_ARGS="--prefix=$prefix --sysconfdir=$sysconfdir --localstatedir=$localstatedir --libdir=$libdir"
-    echo "Running ./configure with $EXTRA_ARGS $@"
-else
-    if test -z "$*" && test ! -f "$THEDIR/config.status"; then
-        echo "I am going to run ./configure with no arguments - if you wish "
-        echo "to pass any to it, please specify them on the $0 command line."
-    fi
-fi
-
-# Compute the hash we'll use to determine whether rerunning bootstrap
-# is required.  The first is just the SHA1 that selects a gnulib snapshot.
-# The second ensures that whenever we change the set of gnulib modules used
-# by this package, we rerun bootstrap to pull in the matching set of files.
-bootstrap_hash()
-{
-    git submodule status | sed 's/^[ +-]//;s/ .*//'
-    git hash-object bootstrap.conf
-}
-
-# Ensure that whenever we pull in a gnulib update or otherwise change to a
-# different version (i.e., when switching branches), we also rerun ./bootstrap.
-# Also, running 'make rpm' tends to litter the po/ directory, and some people
-# like to run 'git clean -x -f po' to fix it; but only ./bootstrap regenerates
-# the required file po/Makevars.
-# Only run bootstrap from a git checkout, never from a tarball.
-if test -d .git; then
-    curr_status=.git-module-status
-    t=$(bootstrap_hash; git diff .gnulib)
-    if test "$t" = "$(cat $curr_status 2>/dev/null)" \
-        && test -f "po/Makevars"; then
-        # good, it's up to date, all we need is autoreconf
-        autoreconf -if
-    else
-        echo running bootstrap$no_git...
-        ./bootstrap$no_git --bootstrap-sync && bootstrap_hash > $curr_status \
-            || { echo "Failed to bootstrap, please investigate."; exit 1; }
-    fi
-fi
-
-cd "$THEDIR"
-
-if test "x$OBJ_DIR" != x; then
-    mkdir -p "$OBJ_DIR"
-    cd "$OBJ_DIR"
-fi
-
-if test -z "$*" && test -f config.status; then
-    ./config.status --recheck
-else
-    $srcdir/configure $EXTRA_ARGS "$@"
-fi && {
-    echo
-    echo "Now type 'make' to compile libvirt."
-}

bootstrap.conf

-# Bootstrap configuration.
-
-# Copyright (C) 2010-2012 Red Hat, Inc.
-
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
-
-
-# gnulib modules used by this package.
-gnulib_modules='
-accept
-areadlink
-base64
-bind
-byteswap
-c-ctype
-c-strcase
-c-strcasestr
-calloc-posix
-canonicalize-lgpl
-chown
-close
-connect
-configmake
-count-one-bits
-crypto/md5
-dirname-lgpl
-environ
-fclose
-fcntl
-fcntl-h
-ffs
-fnmatch
-fsync
-func
-getaddrinfo
-getcwd-lgpl
-gethostname
-getpass
-getpeername
-getsockname
-gettext-h
-gettimeofday
-gitlog-to-changelog
-gnumakefile
-ignore-value
-inet_pton
-intprops
-ioctl
-isatty
-largefile
-listen
-maintainer-makefile
-manywarnings
-mkstemp
-mkstemps
-mktempd
-netdb
-nonblocking
-passfd
-perror
-physmem
-pipe-posix
-pipe2
-poll
-posix-shell
-pthread
-pthread_sigmask
-recv
-regex
-random_r
-sched
-send
-setsockopt
-sigaction
-sigpipe
-snprintf
-socket
-stdarg
-stpcpy
-strchrnul
-strdup-posix
-strndup
-strerror
-strerror_r-posix
-strptime
-strsep
-strtok_r
-sys_stat
-sys_wait
-termios
-time_r
-timegm
-uname
-useless-if-before-free
-usleep
-vasprintf
-verify
-vc-list-files
-vsnprintf
-waitpid
-warnings
-'
-
-# Additional xgettext options to use.  Use "\\\newline" to break lines.
-XGETTEXT_OPTIONS=$XGETTEXT_OPTIONS'\\\
- --flag=virAsprintf:2:c-format\\\
- --from-code=UTF-8\\\
-'
-
-# This is not a GNU package, so the default bug address is invalid,
-# and the translation project is not in use.
-MSGID_BUGS_ADDRESS=libvir-list@redhat.com
-COPYRIGHT_HOLDER='Red Hat, Inc.'
-SKIP_PO=true
-
-# Enable copy-mode for MSYS/MinGW. MSYS' ln doesn't work well in the way
-# bootstrap uses it with relative paths.
-if test -n "$MSYSTEM"; then
-    copy=true
-fi
-
-# If "AM_GNU_GETTEXT(external" or "AM_GNU_GETTEXT([external]"
-# appears in configure.ac, exclude some unnecessary files.
-# Without grep's -E option (not portable enough, pre-configure),
-# the following test is ugly.  Also, this depends on the existence
-# of configure.ac, not the obsolescent-named configure.in.  But if
-# you're using this infrastructure, you should care about such things.
-
-gettext_external=0
-grep '^[	 ]*AM_GNU_GETTEXT(external\>' configure.ac > /dev/null &&
-  gettext_external=1
-grep '^[	 ]*AM_GNU_GETTEXT(\[external\]' configure.ac > /dev/null &&
-  gettext_external=1
-
-if test $gettext_external = 1; then
-  # Gettext supplies these files, but we don't need them since
-  # we don't have an intl subdirectory.
-  excluded_files='
-      m4/glibc2.m4
-      m4/intdiv0.m4
-      m4/lcmessage.m4
-      m4/uintmax_t.m4
-      m4/ulonglong.m4
-      m4/visibility.m4
-  '
-fi
-
-# Tell gnulib to:
-#   require LGPLv2+
-#   put *.m4 files in new gnulib/m4/ dir
-#   put *.[ch] files in new gnulib/lib/ dir.
-#   import gnulib tests in new gnulib/tests/ dir.
-gnulib_name=libgnu
-m4_base=gnulib/m4
-source_base=gnulib/lib
-tests_base=gnulib/tests
-gnulib_tool_option_extras="\
- --lgpl=2\
- --with-tests\
- --makefile-name=gnulib.mk\
-"
-
-# Convince bootstrap to use multiple m4 directories.
-: ${ACLOCAL=aclocal}
-ACLOCAL="$ACLOCAL -I m4"
-export ACLOCAL
-
-# Build prerequisites
-buildreq="\
-autoconf   2.59
-automake   1.9.6
-autopoint  -
-gettext    0.17
-git        1.5.5
-gzip       -
-libtool    -
-perl       5.5
-pkg-config -
-rpcgen     -
-tar        -
-"
-
-# Automake requires that ChangeLog exist.
-touch ChangeLog || exit 1
-
-# Override bootstrap's list - we don't use mdate-sh or texinfo.tex.
-gnulib_extra_files="
-        $build_aux/install-sh
-        $build_aux/depcomp
-        $build_aux/config.guess
-        $build_aux/config.sub
-        doc/INSTALL
-"
-
-
-bootstrap_epilogue()
-{
-  # Change paths in gnulib/tests/gnulib.mk from "../../.." to "../..",
-  # then ensure that gnulib/tests/Makefile.in is up-to-date.
-  m=gnulib/tests/gnulib.mk
-  sed 's,\.\./\.\./\.\.,../..,g' $m > $m-t
-  mv -f $m-t $m
-  ${AUTOMAKE-automake} gnulib/tests/Makefile
-}

daemon/.gitignore

-*.la
-*.lo
-.deps
-.libs
-Makefile
-Makefile.in
-libvirt_qemud
-libvirtd
-libvirtd.init
-libvirtd*.logrotate
-libvirtd.8
-libvirtd.8.in
-libvirtd.pod
-probes.h

daemon/Makefile.am

-## Process this file with automake to produce Makefile.in
-
-## Copyright (C) 2005-2011 Red Hat, Inc.
-## See COPYING.LIB for the License of this software
-
-INCLUDES = \
-	-I$(top_srcdir)/gnulib/lib -I../gnulib/lib \
-	-I$(top_srcdir)/include -I$(top_builddir)/include \
-	-I$(top_srcdir)/src \
-	-I$(top_srcdir)/src/util \
-	-I$(top_srcdir)/src/conf \
-	-I$(top_srcdir)/src/rpc \
-	-I$(top_srcdir)/src/remote \
-	$(GETTEXT_CPPFLAGS)
-
-CLEANFILES =
-
-DAEMON_GENERATED =					\
-		$(srcdir)/remote_dispatch.h		\
-		$(srcdir)/qemu_dispatch.h
-
-DAEMON_SOURCES =					\
-		libvirtd.c libvirtd.h			\
-		remote.c remote.h			\
-		stream.c stream.h			\
-		../src/remote/remote_protocol.c		\
-		../src/remote/qemu_protocol.c		\
-		$(DAEMON_GENERATED)
-
-DISTCLEANFILES =
-EXTRA_DIST =						\
-	remote_dispatch.h				\
-	qemu_dispatch.h					\
-	libvirtd.conf					\
-	libvirtd.init.in				\
-	libvirtd.upstart				\
-	libvirtd.policy-0				\
-	libvirtd.policy-1				\
-	libvirtd.sasl					\
-	libvirtd.sysconf				\
-	libvirtd.aug                                    \
-	libvirtd.logrotate.in                           \
-	libvirtd.qemu.logrotate.in                      \
-	libvirtd.lxc.logrotate.in                       \
-	libvirtd.uml.logrotate.in                       \
-	test_libvirtd.aug                               \
-	THREADS.txt					\
-	libvirtd.pod.in					\
-	libvirtd.8.in					\
-	libvirtd.stp					\
-	$(DAEMON_SOURCES)
-
-BUILT_SOURCES =
-
-REMOTE_PROTOCOL = $(top_srcdir)/src/remote/remote_protocol.x
-QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x
-
-$(srcdir)/remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
-		$(REMOTE_PROTOCOL)
-	$(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b remote \
-	  $(REMOTE_PROTOCOL) > $@
-
-$(srcdir)/qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
-		$(QEMU_PROTOCOL)
-	$(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b qemu \
-	  $(QEMU_PROTOCOL) > $@
-
-if WITH_LIBVIRTD
-
-man8_MANS = libvirtd.8
-
-sbin_PROGRAMS = libvirtd
-
-confdir = $(sysconfdir)/libvirt/
-conf_DATA = libvirtd.conf
-
-augeasdir = $(datadir)/augeas/lenses
-augeas_DATA = libvirtd.aug
-
-augeastestsdir = $(datadir)/augeas/lenses/tests
-augeastests_DATA = test_libvirtd.aug
-
-libvirtd.8: $(srcdir)/libvirtd.8.in
-	sed \
-	    -e 's![@]sysconfdir[@]!$(sysconfdir)!g' \
-	    -e 's![@]localstatedir[@]!$(localstatedir)!g' \
-	    -e 's![@]remote_pid_file[@]!$(REMOTE_PID_FILE)!g' \
-	    < $< > $@-t
-	mv $@-t $@
-
-libvirtd_SOURCES = $(DAEMON_SOURCES)
-
-#-D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED=1 -D_POSIX_C_SOURCE=199506L
-libvirtd_CFLAGS = \
-	$(LIBXML_CFLAGS) $(GNUTLS_CFLAGS) $(SASL_CFLAGS) \
-	$(XDR_CFLAGS) $(POLKIT_CFLAGS) \
-	$(WARN_CFLAGS) \
-	$(COVERAGE_CFLAGS) \
-	-DQEMUD_PID_FILE="\"$(QEMUD_PID_FILE)\"" \
-	-DREMOTE_PID_FILE="\"$(REMOTE_PID_FILE)\""
-
-libvirtd_LDFLAGS =					\
-	$(WARN_CFLAGS)					\
-	$(COVERAGE_LDFLAGS)
-
-libvirtd_LDADD =					\
-	$(LIBXML_LIBS)					\
-	$(GNUTLS_LIBS)					\
-	$(SASL_LIBS)					\
-	$(POLKIT_LIBS)
-
-libvirtd_LDADD += \
-	../src/libvirt-net-rpc-server.la \
-	../src/libvirt-net-rpc.la \
-	../src/libvirt-qemu.la
-
-if ! WITH_DRIVER_MODULES
-if WITH_QEMU
-    libvirtd_LDADD += ../src/libvirt_driver_qemu.la
-endif
-
-if WITH_LXC
-    libvirtd_LDADD += ../src/libvirt_driver_lxc.la
-endif
-
-if WITH_LIBXL
-    libvirtd_LDADD += ../src/libvirt_driver_libxl.la
-endif
-
-if WITH_UML
-    libvirtd_LDADD += ../src/libvirt_driver_uml.la
-endif
-
-if WITH_STORAGE_DIR
-    libvirtd_LDADD += ../src/libvirt_driver_storage.la
-endif
-
-if WITH_NETWORK
-    libvirtd_LDADD += ../src/libvirt_driver_network.la
-endif
-
-if WITH_NETCF
-    libvirtd_LDADD += ../src/libvirt_driver_interface.la
-endif
-
-if WITH_NODE_DEVICES
-    libvirtd_LDADD += ../src/libvirt_driver_nodedev.la
-endif
-
-if WITH_SECRETS
-    libvirtd_LDADD += ../src/libvirt_driver_secret.la
-endif
-
-if WITH_NWFILTER
-    libvirtd_LDADD += ../src/libvirt_driver_nwfilter.la
-endif
-endif
-
-libvirtd_LDADD += ../src/libvirt.la
-
-if HAVE_POLKIT
-if HAVE_POLKIT0
-policydir = $(datadir)/PolicyKit/policy
-policyfile = libvirtd.policy-0
-else
-policydir = $(datadir)/polkit-1/actions
-policyfile = libvirtd.policy-1
-endif
-endif
-
-if WITH_DTRACE
-libvirtd_LDADD += probes.o
-nodist_libvirtd_SOURCES = probes.h
-
-BUILT_SOURCES += probes.h
-
-tapsetdir = $(datadir)/systemtap/tapset
-tapset_DATA = libvirtd.stp
-
-probes.h: probes.d
-	$(AM_V_GEN)$(DTRACE) -o $@ -h -s $<
-
-probes.o: probes.d
-	$(AM_V_GEN)$(DTRACE) -o $@ -G -s $<
-
-CLEANFILES += probes.h probes.o
-endif
-
-install-data-local: install-init install-data-sasl install-data-polkit \
-		    install-logrotate
-	mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt
-	mkdir -p $(DESTDIR)$(localstatedir)/run/libvirt
-	mkdir -p $(DESTDIR)$(localstatedir)/lib/libvirt
-
-uninstall-local:: uninstall-init uninstall-data-sasl uninstall-data-polkit
-	rmdir $(DESTDIR)$(localstatedir)/log/libvirt || :
-	rmdir $(DESTDIR)$(localstatedir)/run/libvirt || :
-	rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || :
-
-if HAVE_POLKIT
-install-data-polkit:: install-init
-	mkdir -p $(DESTDIR)$(policydir)
-	$(INSTALL_DATA) $(srcdir)/$(policyfile) $(DESTDIR)$(policydir)/org.libvirt.unix.policy
-uninstall-data-polkit:: install-init
-	rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
-else
-install-data-polkit::
-uninstall-data-polkit::
-endif
-
-remote.c: $(DAEMON_GENERATED)
-remote.h: $(DAEMON_GENERATED)
-
-LOGROTATE_CONFS = libvirtd.qemu.logrotate libvirtd.lxc.logrotate \
-		  libvirtd.uml.logrotate libvirtd.logrotate
-
-BUILT_SOURCES += $(LOGROTATE_CONFS)
-
-libvirtd.logrotate: libvirtd.logrotate.in
-	sed							\
-	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
-	    < $< > $@-t
-	mv $@-t $@
-
-libvirtd.qemu.logrotate: libvirtd.qemu.logrotate.in
-	sed							\
-	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
-	    < $< > $@-t
-	mv $@-t $@
-
-libvirtd.lxc.logrotate: libvirtd.lxc.logrotate.in
-	$(AM_V_GEN)sed						\
-	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
-	    < $< > $@-t &&					\
-	    mv $@-t $@
-
-libvirtd.uml.logrotate: libvirtd.uml.logrotate.in
-	$(AM_V_GEN)sed						\
-	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
-	    < $< > $@-t &&					\
-	    mv $@-t $@
-
-install-logrotate: $(LOGROTATE_CONFS)
-	mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt/qemu/
-	mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt/lxc/
-	mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt/uml/
-	mkdir -p $(DESTDIR)$(sysconfdir)/logrotate.d/
-	$(INSTALL_DATA) libvirtd.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd
-	$(INSTALL_DATA) libvirtd.qemu.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu
-	$(INSTALL_DATA) libvirtd.lxc.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc
-	$(INSTALL_DATA) libvirtd.uml.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
-
-if LIBVIRT_INIT_SCRIPT_RED_HAT
-install-init: libvirtd.init
-	mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d
-	$(INSTALL_SCRIPT) libvirtd.init \
-	  $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
-	mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig
-	$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
-	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
-
-uninstall-init:
-	rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd \
-		$(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
-
-BUILT_SOURCES += libvirtd.init
-
-libvirtd.init: libvirtd.init.in $(top_builddir)/config.status
-	$(AM_V_GEN)sed					\
-	    -e s!\@localstatedir\@!$(localstatedir)!g	\
-	    -e s!\@sbindir\@!$(sbindir)!g		\
-	    -e s!\@sysconfdir\@!$(sysconfdir)!g		\
-	    < $< > $@-t &&				\
-	    chmod a+x $@-t &&				\
-	    mv $@-t $@
-
-check-local:
-	$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
-	  '$(AUGPARSE)' -I $(srcdir) $(srcdir)/test_libvirtd.aug; \
-	fi
-
-else
-
-install-init:
-uninstall-init:
-libvirtd.init:
-
-endif # LIBVIRT_INIT_SCRIPT_RED_HAT
-
-# This must be added last, since functions it provides/replaces
-# are used by nearly every other library.
-libvirtd_LDADD += ../gnulib/lib/libgnu.la $(LIBSOCKET)
-
-else # WITH_LIBVIRTD
-install-data-local: install-data-sasl
-uninstall-local:: uninstall-data-sasl
-endif # WITH_LIBVIRTD
-
-# This is needed for 'make dist' too, so can't wrap in WITH_LIBVIRTD.
-EXTRA_DIST += probes.d libvirtd.stp
-
-POD2MAN = pod2man -c "Virtualization Support" \
-			-r "$(PACKAGE)-$(VERSION)" -s 8
-
-$(srcdir)/libvirtd.8.in: libvirtd.pod.in
-	$(AM_V_GEN)$(POD2MAN) $< $@
-
-# This is needed for clients too, so can't wrap in
-# the WITH_LIBVIRTD conditional
-if HAVE_SASL
-install-data-sasl:
-	mkdir -p $(DESTDIR)$(sysconfdir)/sasl2/
-	$(INSTALL_DATA) $(srcdir)/libvirtd.sasl $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
-
-uninstall-data-sasl:
-	rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
-	rmdir $(DESTDIR)$(sysconfdir)/sasl2/
-else
-install-data-sasl:
-uninstall-data-sasl:
-endif
-
-
-CLEANFILES += $(BUILT_SOURCES) $(man8_MANS)
-CLEANFILES += *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
-MAINTAINERCLEANFILES = $(srcdir)/libvirtd.8.in $(DAEMON_GENERATED)

daemon/THREADS.txt

-
-     Threading in the libvirtd daemon
-     ================================
-
-To allow efficient processing of RPC requests, the libvirtd daemon
-makes use of threads.
-
- - The process leader. This is the initial thread of control
-   when the daemon starts running. It is responsible for
-   initializing all the state, and starting the event loop.
-   Once that's all done, this thread does nothing except
-   wait for the event loop to quit, thus indicating an orderly
-   shutdown is required.
-
- - The event loop. This thread runs the event loop, sitting
-   in poll() on all monitored file handles, and calculating
-   and dispatching any timers that may be registered. When
-   this thread quits, the entire daemon will shutdown.
-
- - The workers. These 'n' threads all sit around waiting to
-   process incoming RPC requests. Since RPC requests may take
-   a long time to complete, with long idle periods, there will
-   be quite a few workers running.
-
-The use of threads obviously requires locking to ensure safety when
-accessing/changing data structures.
-
- - the top level lock is on 'struct qemud_server'. This must be
-   held before acquiring any other lock
-
- - Each 'struct qemud_client' object has a lock. The server lock
-   must be held before acquiring it. Once the client lock is acquired
-   the server lock can (optionally) be dropped.
-
- - The event loop has its own self-contained lock. You can ignore
-   this as a caller of virEvent APIs.
-
-
-The server lock is used in conjunction with a condition variable
-to pass jobs from the event loop thread to the workers. The main
-event loop thread handles I/O from the client socket, and once a
-complete RPC message has been read off the wire (and optionally
-decrypted), it will be placed onto the 'dx' job queue for the
-associated client object. The job condition will be signalled and
-a worker will wakup and process it.
-
-The worker thread must quickly drop its locks on the server and
-client to allow the main event loop thread to continue running
-with its other work. Critically important, is that now libvirt
-API call will ever be made with the server or client locks held.
-
--- End

daemon/libvirtd.aug

-(* /etc/libvirt/libvirtd.conf *)
-
-module Libvirtd =
-   autoload xfm
-
-   let eol   = del /[ \t]*\n/ "\n"
-   let value_sep   = del /[ \t]*=[ \t]*/  " = "
-   let indent = del /[ \t]*/ ""
-
-   let array_sep  = del /,[ \t\n]*/ ", "
-   let array_start = del /\[[ \t\n]*/ "[ "
-   let array_end = del /\]/ "]"
-
-   let str_val = del /\"/ "\"" . store /[^\"]*/ . del /\"/ "\""
-   let bool_val = store /0|1/
-   let int_val = store /[0-9]+/
-   let str_array_element = [ seq "el" . str_val ] . del /[ \t\n]*/ ""
-   let str_array_val = counter "el" . array_start . ( str_array_element . ( array_sep . str_array_element ) * ) ? . array_end
-
-   let str_entry       (kw:string) = [ key kw . value_sep . str_val ]
-   let bool_entry      (kw:string) = [ key kw . value_sep . bool_val ]
-   let int_entry      (kw:string) = [ key kw . value_sep . int_val ]
-   let str_array_entry (kw:string) = [ key kw . value_sep . str_array_val ]
-
-
-   (* Config entry grouped by function - same order as example config *)
-   let network_entry = bool_entry "listen_tls"
-                     | bool_entry "listen_tcp"
-                     | str_entry "tls_port"
-                     | str_entry "tcp_port"
-                     | str_entry "listen_addr"
-                     | bool_entry "mdns_adv"
-                     | str_entry "mdns_name"
-
-   let sock_acl_entry = str_entry "unix_sock_group"
-                      | str_entry "unix_sock_ro_perms"
-                      | str_entry "unix_sock_rw_perms"
-                      | str_entry "unix_sock_dir"
-
-   let authentication_entry = str_entry "auth_unix_ro"
-                            | str_entry "auth_unix_rw"
-                            | str_entry "auth_tcp"
-                            | str_entry "auth_tls"
-
-   let certificate_entry = str_entry "key_file"
-                         | str_entry "cert_file"
-                         | str_entry "ca_file"
-                         | str_entry "crl_file"
-
-   let authorization_entry = bool_entry "tls_no_verify_certificate"
-                           | bool_entry "tls_no_sanity_certificate"
-                           | str_array_entry "tls_allowed_dn_list"
-                           | str_array_entry "sasl_allowed_username_list"
-
-   let processing_entry = int_entry "min_workers"
-                        | int_entry "max_workers"
-                        | int_entry "max_clients"
-                        | int_entry "max_requests"
-                        | int_entry "max_client_requests"
-                        | int_entry "prio_workers"
-
-   let logging_entry = int_entry "log_level"
-                     | str_entry "log_filters"
-                     | str_entry "log_outputs"
-
-   let auditing_entry = int_entry "audit_level"
-                      | bool_entry "audit_logging"
-
-   (* Each enty in the config is one of the following three ... *)
-   let entry = network_entry
-             | sock_acl_entry
-             | authentication_entry
-             | certificate_entry
-             | authorization_entry
-             | processing_entry
-             | logging_entry
-             | auditing_entry
-   let comment = [ label "#comment" . del /#[ \t]*/ "# " .  store /([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
-   let empty = [ label "#empty" . eol ]
-
-   let record = indent . entry . eol
-
-   let lns = ( record | comment | empty ) *
-
-   let filter = incl "/etc/libvirt/libvirtd.conf"
-              . Util.stdexcl
-
-   let xfm = transform lns filter

daemon/libvirtd.conf

-# Master libvirt daemon configuration file
-#
-# For further information consult http://libvirt.org/format.html
-#
-# NOTE: the tests/daemon-conf regression test script requires
-# that each "PARAMETER = VALUE" line in this file have the parameter
-# name just after a leading "#".
-
-#################################################################
-#
-# Network connectivity controls
-#
-
-# Flag listening for secure TLS connections on the public TCP/IP port.
-# NB, must pass the --listen flag to the libvirtd process for this to
-# have any effect.
-#
-# It is necessary to setup a CA and issue server certificates before
-# using this capability.
-#
-# This is enabled by default, uncomment this to disable it
-#listen_tls = 0
-
-# Listen for unencrypted TCP connections on the public TCP/IP port.
-# NB, must pass the --listen flag to the libvirtd process for this to
-# have any effect.
-#
-# Using the TCP socket requires SASL authentication by default. Only
-# SASL mechanisms which support data encryption are allowed. This is
-# DIGEST_MD5 and GSSAPI (Kerberos5)
-#
-# This is disabled by default, uncomment this to enable it.
-#listen_tcp = 1
-
-
-
-# Override the port for accepting secure TLS connections
-# This can be a port number, or service name
-#
-#tls_port = "16514"
-
-# Override the port for accepting insecure TCP connections
-# This can be a port number, or service name
-#
-#tcp_port = "16509"
-
-
-# Override the default configuration which binds to all network
-# interfaces. This can be a numeric IPv4/6 address, or hostname
-#
-#listen_addr = "192.168.0.1"
-
-
-# Flag toggling mDNS advertizement of the libvirt service.
-#
-# Alternatively can disable for all services on a host by
-# stopping the Avahi daemon
-#
-# This is enabled by default, uncomment this to disable it
-#mdns_adv = 0
-
-# Override the default mDNS advertizement name. This must be
-# unique on the immediate broadcast network.
-#
-# The default is "Virtualization Host HOSTNAME", where HOSTNAME
-# is subsituted for the short hostname of the machine (without domain)
-#
-#mdns_name = "Virtualization Host Joe Demo"
-
-
-#################################################################
-#
-# UNIX socket access controls
-#
-
-# Set the UNIX domain socket group ownership. This can be used to
-# allow a 'trusted' set of users access to management capabilities
-# without becoming root.
-#
-# This is restricted to 'root' by default.
-#unix_sock_group = "libvirt"
-
-# Set the UNIX socket permissions for the R/O socket. This is used
-# for monitoring VM status only
-#
-# Default allows any user. If setting group ownership may want to
-# restrict this to:
-#unix_sock_ro_perms = "0777"
-
-# Set the UNIX socket permissions for the R/W socket. This is used
-# for full management of VMs
-#
-# Default allows only root. If PolicyKit is enabled on the socket,
-# the default will change to allow everyone (eg, 0777)
-#
-# If not using PolicyKit and setting group ownership for access
-# control then you may want to relax this to:
-#unix_sock_rw_perms = "0770"
-
-# Set the name of the directory in which sockets will be found/created.
-#unix_sock_dir = "/var/run/libvirt"
-
-#################################################################
-#
-# Authentication.
-#
-#  - none: do not perform auth checks. If you can connect to the
-#          socket you are allowed. This is suitable if there are
-#          restrictions on connecting to the socket (eg, UNIX
-#          socket permissions), or if there is a lower layer in
-#          the network providing auth (eg, TLS/x509 certificates)
-#
-#  - sasl: use SASL infrastructure. The actual auth scheme is then
-#          controlled from /etc/sasl2/libvirt.conf. For the TCP
-#          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
-#          For non-TCP or TLS sockets,  any scheme is allowed.
-#
-#  - polkit: use PolicyKit to authenticate. This is only suitable
-#            for use on the UNIX sockets. The default policy will
-#            require a user to supply their own password to gain
-#            full read/write access (aka sudo like), while anyone
-#            is allowed read/only access.
-#
-# Set an authentication scheme for UNIX read-only sockets
-# By default socket permissions allow anyone to connect
-#
-# To restrict monitoring of domains you may wish to enable
-# an authentication mechanism here
-#auth_unix_ro = "none"
-
-# Set an authentication scheme for UNIX read-write sockets
-# By default socket permissions only allow root. If PolicyKit
-# support was compiled into libvirt, the default will be to
-# use 'polkit' auth.
-#
-# If the unix_sock_rw_perms are changed you may wish to enable
-# an authentication mechanism here
-#auth_unix_rw = "none"
-
-# Change the authentication scheme for TCP sockets.
-#
-# If you don't enable SASL, then all TCP traffic is cleartext.
-# Don't do this outside of a dev/test scenario. For real world
-# use, always enable SASL and use the GSSAPI or DIGEST-MD5
-# mechanism in /etc/sasl2/libvirt.conf
-#auth_tcp = "sasl"
-
-# Change the authentication scheme for TLS sockets.
-#
-# TLS sockets already have encryption provided by the TLS
-# layer, and limited authentication is done by certificates
-#
-# It is possible to make use of any SASL authentication
-# mechanism as well, by using 'sasl' for this option
-#auth_tls = "none"
-
-
-
-#################################################################
-#
-# TLS x509 certificate configuration
-#
-
-
-# Override the default server key file path
-#
-#key_file = "/etc/pki/libvirt/private/serverkey.pem"
-
-# Override the default server certificate file path
-#
-#cert_file = "/etc/pki/libvirt/servercert.pem"
-
-# Override the default CA certificate path
-#
-#ca_file = "/etc/pki/CA/cacert.pem"
-
-# Specify a certificate revocation list.
-#
-# Defaults to not using a CRL, uncomment to enable it
-#crl_file = "/etc/pki/CA/crl.pem"
-
-
-
-#################################################################
-#
-# Authorization controls
-#
-
-
-# Flag to disable verification of our own server certificates
-#
-# When libvirtd starts it performs some sanity checks against
-# its own certificates.
-#
-# Default is to always run sanity checks. Uncommenting this
-# will disable sanity checks which is not a good idea
-#tls_no_sanity_certificate = 1
-
-# Flag to disable verification of client certificates
-#
-# Client certificate verification is the primary authentication mechanism.
-# Any client which does not present a certificate signed by the CA
-# will be rejected.
-#
-# Default is to always verify. Uncommenting this will disable
-# verification - make sure an IP whitelist is set
-#tls_no_verify_certificate = 1
-
-
-# A whitelist of allowed x509  Distinguished Names
-# This list may contain wildcards such as
-#
-#    "C=GB,ST=London,L=London,O=Red Hat,CN=*"
-#
-# See the POSIX fnmatch function for the format of the wildcards.
-#
-# NB If this is an empty list, no client can connect, so comment out
-# entirely rather than using empty list to disable these checks
-#
-# By default, no DN's are checked
-#tls_allowed_dn_list = ["DN1", "DN2"]
-
-
-# A whitelist of allowed SASL usernames. The format for usernames
-# depends on the SASL authentication mechanism. Kerberos usernames
-# look like username@REALM
-#
-# This list may contain wildcards such as
-#
-#    "*@EXAMPLE.COM"
-#
-# See the POSIX fnmatch function for the format of the wildcards.
-#
-# NB If this is an empty list, no client can connect, so comment out
-# entirely rather than using empty list to disable these checks
-#
-# By default, no Username's are checked
-#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
-
-
-
-#################################################################
-#
-# Processing controls
-#
-
-# The maximum number of concurrent client connections to allow
-# over all sockets combined.
-#max_clients = 20
-
-
-# The minimum limit sets the number of workers to start up
-# initially. If the number of active clients exceeds this,
-# then more threads are spawned, upto max_workers limit.
-# Typically you'd want max_workers to equal maximum number
-# of clients allowed
-#min_workers = 5
-#max_workers = 20
-
-
-# The number of priority workers. If all workers from above
-# pool will stuck, some calls marked as high priority
-# (notably domainDestroy) can be executed in this pool.
-#prio_workers = 5
-
-# Total global limit on concurrent RPC calls. Should be
-# at least as large as max_workers. Beyond this, RPC requests
-# will be read into memory and queued. This directly impact
-# memory usage, currently each request requires 256 KB of
-# memory. So by default upto 5 MB of memory is used
-#
-# XXX this isn't actually enforced yet, only the per-client
-# limit is used so far
-#max_requests = 20
-
-# Limit on concurrent requests from a single client
-# connection. To avoid one client monopolizing the server
-# this should be a small fraction of the global max_requests
-# and max_workers parameter
-#max_client_requests = 5
-
-#################################################################
-#
-# Logging controls
-#
-
-# Logging level: 4 errors, 3 warnings, 2 informations, 1 debug
-# basically 1 will log everything possible
-#log_level = 3
-
-# Logging filters:
-# A filter allows to select a different logging level for a given category
-# of logs
-# The format for a filter is:
-#    x:name
-#      where name is a match string e.g. remote or qemu
-# the x prefix is the minimal level where matching messages should be logged
-#    1: DEBUG
-#    2: INFO
-#    3: WARNING
-#    4: ERROR
-#
-# Multiple filter can be defined in a single @filters, they just need to be
-# separated by spaces.
-#
-# e.g:
-# log_filters="3:remote 4:event"
-# to only get warning or errors from the remote layer and only errors from
-# the event layer.
-
-# Logging outputs:
-# An output is one of the places to save logging informations
-# The format for an output can be:
-#    x:stderr
-#      output goes to stderr
-#    x:syslog:name
-#      use syslog for the output and use the given name as the ident
-#    x:file:file_path
-#      output to a file, with the given filepath
-# In all case the x prefix is the minimal level, acting as a filter
-#    1: DEBUG
-#    2: INFO
-#    3: WARNING
-#    4: ERROR
-#
-# Multiple output can be defined, they just need to be separated by spaces.
-# e.g.:
-# log_outputs="3:syslog:libvirtd"
-# to log all warnings and errors to syslog under the libvirtd ident
-
-# Log debug buffer size: default 64
-# The daemon keeps an internal debug log buffer which will be dumped in case
-# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
-# the default buffer size in kilobytes.
-# If value is 0 or less the debug log buffer is deactivated
-#log_buffer_size = 64
-
-
-##################################################################
-#
-# Auditing
-#
-# This setting allows usage of the auditing subsystem to be altered:
-#
-#   audit_level == 0  -> disable all auditing
-#   audit_level == 1  -> enable auditing, only if enabled on host (default)
-#   audit_level == 2  -> enable auditing, and exit if disabled on host
-#
-#audit_level = 2
-#
-# If set to 1, then audit messages will also be sent
-# via libvirt logging infrastructure. Defaults to 0
-#
-#audit_logging = 1
-
-###################################################################
-# UUID of the host:
-# Provide the UUID of the host here in case the command
-# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
-# 'dmidecode' does not provide a valid UUID and none is provided here, a
-# temporary UUID will be generated.
-# Keep the format of the example UUID below. UUID must not have all digits
-# be the same.
-
-# NB This default all-zeros UUID will not work. Replace
-# it with the output of the 'uuidgen' command and then
-# uncomment this entry
-#host_uuid = "00000000-0000-0000-0000-000000000000"

daemon/libvirtd.h

-/*
- * libvirtd.h: daemon data structure definitions
- *
- * Copyright (C) 2006-2011 Red Hat, Inc.
- * Copyright (C) 2006 Daniel P. Berrange
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
- *
- * Author: Daniel P. Berrange <berrange@redhat.com>
- */
-
-
-#ifndef QEMUD_INTERNAL_H__
-# define QEMUD_INTERNAL_H__
-
-# include <config.h>
-
-# include <rpc/types.h>
-# include <rpc/xdr.h>
-# include "remote_protocol.h"
-# include "qemu_protocol.h"
-# include "logging.h"
-# include "threads.h"
-# include "network.h"
-# if HAVE_SASL
-#  include "virnetsaslcontext.h"
-# endif
-# include "virnetserverprogram.h"
-
-# if WITH_DTRACE
-#  ifndef LIBVIRTD_PROBES_H
-#   define LIBVIRTD_PROBES_H
-#   include "probes.h"
-#  endif /* LIBVIRTD_PROBES_H */
-
-/* Systemtap 1.2 headers have a bug where they cannot handle a
- * variable declared with array type.  Work around this by casting all
- * arguments.  This is some gross use of the preprocessor because
- * PROBE is a var-arg macro, but it is better than the alternative of
- * making all callers to PROBE have to be aware of the issues.  And
- * hopefully, if we ever add a call to PROBE with other than 2 or 3
- * end arguments, you can figure out the pattern to extend this hack.
- */
-#  define VIR_COUNT_ARGS(...) VIR_ARG5(__VA_ARGS__, 4, 3, 2, 1)
-#  define VIR_ARG5(_1, _2, _3, _4, _5, ...) _5
-#  define VIR_ADD_CAST_EXPAND(a, b, ...) VIR_ADD_CAST_PASTE(a, b, __VA_ARGS__)
-#  define VIR_ADD_CAST_PASTE(a, b, ...) a##b(__VA_ARGS__)
-
-/* The double cast is necessary to silence gcc warnings; any pointer
- * can safely go to intptr_t and back to void *, which collapses
- * arrays into pointers; while any integer can be widened to intptr_t
- * then cast to void *.  */
-#  define VIR_ADD_CAST(a) ((void *)(intptr_t)(a))
-#  define VIR_ADD_CAST2(a, b)                           \
-    VIR_ADD_CAST(a), VIR_ADD_CAST(b)
-#  define VIR_ADD_CAST3(a, b, c)                        \
-    VIR_ADD_CAST(a), VIR_ADD_CAST(b), VIR_ADD_CAST(c)
-
-#  define VIR_ADD_CASTS(...)                                            \
-    VIR_ADD_CAST_EXPAND(VIR_ADD_CAST, VIR_COUNT_ARGS(__VA_ARGS__),      \
-                        __VA_ARGS__)
-
-#  define PROBE_EXPAND(NAME, ARGS) NAME(ARGS)
-#  define PROBE(NAME, FMT, ...)                              \
-    VIR_DEBUG_INT("trace." __FILE__ , __func__, __LINE__,    \
-                  #NAME ": " FMT, __VA_ARGS__);              \
-    if (LIBVIRTD_ ## NAME ## _ENABLED()) {                   \
-        PROBE_EXPAND(LIBVIRTD_ ## NAME,                      \
-                     VIR_ADD_CASTS(__VA_ARGS__));            \
-    }
-# else
-#  define PROBE(NAME, FMT, ...)                              \
-    VIR_DEBUG_INT("trace." __FILE__, __func__, __LINE__,     \
-                  #NAME ": " FMT, __VA_ARGS__);
-# endif
-
-typedef struct daemonClientStream daemonClientStream;
-typedef daemonClientStream *daemonClientStreamPtr;
-typedef struct daemonClientPrivate daemonClientPrivate;
-typedef daemonClientPrivate *daemonClientPrivatePtr;
-
-/* Stores the per-client connection state */
-struct daemonClientPrivate {
-    /* Hold while accessing any data except conn */
-    virMutex lock;
-
-    int domainEventCallbackID[VIR_DOMAIN_EVENT_ID_LAST];
-
-# if HAVE_SASL
-    virNetSASLSessionPtr sasl;
-# endif
-
-    /* This is only valid if a remote open call has been made on this
-     * connection, otherwise it will be NULL.  Also if remote close is
-     * called, it will be set back to NULL if that succeeds.
-     */
-    virConnectPtr conn;
-
-    daemonClientStreamPtr streams;
-};
-
-# if HAVE_SASL
-extern virNetSASLContextPtr saslCtxt;
-# endif
-extern virNetServerProgramPtr remoteProgram;
-extern virNetServerProgramPtr qemuProgram;
-
-#endif

daemon/libvirtd.init.in

-#!/bin/sh
-
-# the following is the LSB init header see
-# http://www.linux-foundation.org/spec//booksets/LSB-Core-generic/LSB-Core-generic.html#INITSCRCOMCONV
-#
-### BEGIN INIT INFO
-# Provides: libvirtd
-# Required-Start: $network messagebus
-# Should-Start: $named
-# Should-Start: xend
-# Should-Start: avahi-daemon
-# Required-Stop: $network messagebus
-# Should-Stop: $named
-# Default-Start: 3 4 5
-# Short-Description: daemon for libvirt virtualization API
-# Description: This is a daemon for managing guest instances
-#              and libvirt virtual networks
-#              See http://libvirt.org
-### END INIT INFO
-
-# the following is chkconfig init header
-#
-# libvirtd:   guest and virtual network management daemon
-#
-# chkconfig: 345 97 03
-# description:  This is a daemon for managing guest instances \
-#               and libvirt virtual networks \
-#               See http://libvirt.org
-#
-# processname: libvirtd
-# pidfile: @localstatedir@/run/libvirtd.pid
-#
-
-# Source function library.
-. @sysconfdir@/rc.d/init.d/functions
-
-SERVICE=libvirtd
-PROCESS=libvirtd
-PIDFILE=@localstatedir@/run/$SERVICE.pid
-
-LIBVIRTD_CONFIG=
-LIBVIRTD_ARGS=
-KRB5_KTNAME=/etc/libvirt/krb5.tab
-
-test -f @sysconfdir@/sysconfig/libvirtd && . @sysconfdir@/sysconfig/libvirtd
-
-export QEMU_AUDIO_DRV
-export SDL_AUDIODRIVER
-
-LIBVIRTD_CONFIG_ARGS=
-if [ -n "$LIBVIRTD_CONFIG" ]
-then
-    LIBVIRTD_CONFIG_ARGS="--config $LIBVIRTD_CONFIG"
-fi
-
-RETVAL=0
-
-start() {
-    echo -n $"Starting $SERVICE daemon: "
-    mkdir -p @localstatedir@/cache/libvirt
-    rm -rf @localstatedir@/cache/libvirt/*
-    KRB5_KTNAME=$KRB5_KTNAME daemon --pidfile $PIDFILE --check $SERVICE $PROCESS --daemon $LIBVIRTD_CONFIG_ARGS $LIBVIRTD_ARGS
-    RETVAL=$?
-    echo
-    [ $RETVAL -eq 0 ] && touch @localstatedir@/lock/subsys/$SERVICE
-}
-
-stop() {
-    echo -n $"Stopping $SERVICE daemon: "
-
-    killproc -p $PIDFILE $PROCESS
-    RETVAL=$?
-    echo
-    if [ $RETVAL -eq 0 ]; then
-        rm -f @localstatedir@/lock/subsys/$SERVICE
-        rm -f $PIDFILE
-        rm -rf @localstatedir@/cache/libvirt/*
-    else
-        exit $RETVAL
-    fi
-}
-
-restart() {
-    stop
-    start
-}
-
-reload() {
-    echo -n $"Reloading $SERVICE configuration: "
-
-    killproc -p $PIDFILE $PROCESS -HUP
-    RETVAL=$?
-    echo
-    return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-    start|stop|restart|reload)
-        $1
-        ;;
-    status)
-        status -p $PIDFILE $PROCESS
-        RETVAL=$?
-        ;;
-    force-reload)
-        reload
-        ;;
-    condrestart|try-restart)
-        [ -f @localstatedir@/lock/subsys/$SERVICE ] && restart || :
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart|reload|force-reload|try-restart}"
-        exit 2
-        ;;
-esac
-exit $RETVAL

daemon/libvirtd.logrotate.in

-@localstatedir@/log/libvirt/libvirtd.log {
-        weekly
-        missingok
-        rotate 4
-        compress
-        delaycompress
-        copytruncate
-        minsize 100k
-}

daemon/libvirtd.lxc.logrotate.in

-@localstatedir@/log/libvirt/lxc/*.log {
-        weekly
-        missingok
-        rotate 4
-        compress
-        delaycompress
-        copytruncate
-        minsize 100k
-}

daemon/libvirtd.qemu.logrotate.in

-@localstatedir@/log/libvirt/qemu/*.log {
-        weekly
-        missingok
-        rotate 4
-        compress
-        delaycompress
-        copytruncate
-        minsize 100k
-}