pci.c

/*
 * Copyright (C) 2009-2012 Red Hat, Inc.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library.  If not, see
 * <http://www.gnu.org/licenses/>.
 *
 * Authors:
 *     Mark McLoughlin <markmc@redhat.com>
 */

#include <config.h>

#include "pci.h"

#include <dirent.h>
#include <fcntl.h>
#include <inttypes.h>
#include <limits.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <stdlib.h>

#include "logging.h"
#include "memory.h"
#include "command.h"
#include "virterror_internal.h"
#include "virfile.h"

#define PCI_SYSFS "/sys/bus/pci/"
#define PCI_ID_LEN 10   /* "XXXX XXXX" */
#define PCI_ADDR_LEN 13 /* "XXXX:XX:XX.X" */

#define SRIOV_FOUND 0
#define SRIOV_NOT_FOUND 1
#define SRIOV_ERROR -1

struct _pciDevice {
    unsigned      domain;
    unsigned      bus;
    unsigned      slot;
    unsigned      function;

    char          name[PCI_ADDR_LEN]; /* domain:bus:slot.function */
    char          id[PCI_ID_LEN];     /* product vendor */
    char          *path;
    const char    *used_by;           /* The domain which uses the device */
    int           fd;

    unsigned      initted;
    unsigned      pcie_cap_pos;
    unsigned      pci_pm_cap_pos;
    unsigned      has_flr : 1;
    unsigned      has_pm_reset : 1;
    unsigned      managed : 1;

    /* used by reattach function */
    unsigned      unbind_from_stub : 1;
    unsigned      remove_slot : 1;
    unsigned      reprobe : 1;
};

struct _pciDeviceList {
    unsigned count;
    pciDevice **devs;
};


/* For virReportOOMError()  and virReportSystemError() */
#define VIR_FROM_THIS VIR_FROM_NONE

/* Specifications referenced in comments:
 *  PCI30  - PCI Local Bus Specification 3.0
 *  PCIe20 - PCI Express Base Specification 2.0
 *  BR12   - PCI-to-PCI Bridge Architecture Specification 1.2
 *  PM12   - PCI Bus Power Management Interface Specification 1.2
 *  ECN_AF - Advanced Capabilities for Conventional PCI ECN
 */

/* Type 0 config space header length; PCI30 Section 6.1 Configuration Space Organization */
#define PCI_CONF_LEN            0x100
#define PCI_CONF_HEADER_LEN     0x40

/* PCI30 6.2.1 */
#define PCI_HEADER_TYPE         0x0e    /* Header type */
#define PCI_HEADER_TYPE_BRIDGE 0x1
#define PCI_HEADER_TYPE_MASK   0x7f
#define PCI_HEADER_TYPE_MULTI  0x80

/* PCI30 6.2.1  Device Identification */
#define PCI_CLASS_DEVICE        0x0a    /* Device class */

/* Class Code for bridge; PCI30 D.7  Base Class 06h */
#define PCI_CLASS_BRIDGE_PCI    0x0604

/* PCI30 6.2.3  Device Status */
#define PCI_STATUS              0x06    /* 16 bits */
#define PCI_STATUS_CAP_LIST    0x10    /* Support Capability List */

/* PCI30 6.7  Capabilities List */
#define PCI_CAPABILITY_LIST     0x34    /* Offset of first capability list entry */

/* PM12 3.2.1  Capability Identifier */
#define PCI_CAP_ID_PM           0x01    /* Power Management */
/* PCI30 H Capability IDs */
#define PCI_CAP_ID_EXP          0x10    /* PCI Express */
/* ECN_AF 6.x.1.1  Capability ID for AF */
#define PCI_CAP_ID_AF           0x13    /* Advanced Features */

/* PCIe20 7.8.3  Device Capabilities Register (Offset 04h) */
#define PCI_EXP_DEVCAP          0x4     /* Device capabilities */
#define PCI_EXP_DEVCAP_FLR     (1<<28) /* Function Level Reset */

/* Header type 1 BR12 3.2 PCI-to-PCI Bridge Configuration Space Header Format */
#define PCI_PRIMARY_BUS         0x18    /* BR12 3.2.5.2 Primary bus number */
#define PCI_SECONDARY_BUS       0x19    /* BR12 3.2.5.3 Secondary bus number */
#define PCI_SUBORDINATE_BUS     0x1a    /* BR12 3.2.5.4 Highest bus number behind the bridge */
#define PCI_BRIDGE_CONTROL      0x3e
/* BR12 3.2.5.18  Bridge Control Register */
#define PCI_BRIDGE_CTL_RESET   0x40    /* Secondary bus reset */

/* PM12 3.2.4  Power Management Control/Status (Offset = 4) */
#define PCI_PM_CTRL                4    /* PM control and status register */
#define PCI_PM_CTRL_STATE_MASK    0x3  /* Current power state (D0 to D3) */
#define PCI_PM_CTRL_STATE_D0      0x0  /* D0 state */
#define PCI_PM_CTRL_STATE_D3hot   0x3  /* D3 state */
#define PCI_PM_CTRL_NO_SOFT_RESET 0x8  /* No reset for D3hot->D0 */

/* ECN_AF 6.x.1  Advanced Features Capability Structure */
#define PCI_AF_CAP              0x3     /* Advanced features capabilities */
#define PCI_AF_CAP_FLR         0x2     /* Function Level Reset */

#define PCI_EXP_FLAGS           0x2
#define PCI_EXP_FLAGS_TYPE      0x00f0
#define PCI_EXP_TYPE_DOWNSTREAM 0x6

#define PCI_EXT_CAP_BASE          0x100
#define PCI_EXT_CAP_LIMIT         0x1000
#define PCI_EXT_CAP_ID_MASK       0x0000ffff
#define PCI_EXT_CAP_OFFSET_SHIFT  20
#define PCI_EXT_CAP_OFFSET_MASK   0x00000ffc

#define PCI_EXT_CAP_ID_ACS      0x000d
#define PCI_EXT_ACS_CTRL        0x06

#define PCI_EXT_CAP_ACS_SV      0x01
#define PCI_EXT_CAP_ACS_RR      0x04
#define PCI_EXT_CAP_ACS_CR      0x08
#define PCI_EXT_CAP_ACS_UF      0x10
#define PCI_EXT_CAP_ACS_ENABLED (PCI_EXT_CAP_ACS_SV | \
                                 PCI_EXT_CAP_ACS_RR | \
                                 PCI_EXT_CAP_ACS_CR | \
                                 PCI_EXT_CAP_ACS_UF)

static int
pciOpenConfig(pciDevice *dev)
{
    int fd;

    if (dev->fd > 0)
        return 0;

    fd = open(dev->path, O_RDWR);
    if (fd < 0) {
        char ebuf[1024];
        VIR_WARN("Failed to open config space file '%s': %s",
                 dev->path, virStrerror(errno, ebuf, sizeof(ebuf)));
        return -1;
    }
    VIR_DEBUG("%s %s: opened %s", dev->id, dev->name, dev->path);
    dev->fd = fd;
    return 0;
}

static void
pciCloseConfig(pciDevice *dev)
{
    if (!dev)
        return;

    VIR_FORCE_CLOSE(dev->fd);
}

static int
pciRead(pciDevice *dev, unsigned pos, uint8_t *buf, unsigned buflen)
{
    memset(buf, 0, buflen);

    if (pciOpenConfig(dev) < 0)
        return -1;

    if (lseek(dev->fd, pos, SEEK_SET) != pos ||
        saferead(dev->fd, buf, buflen) != buflen) {
        char ebuf[1024];
        VIR_WARN("Failed to read from '%s' : %s", dev->path,
                 virStrerror(errno, ebuf, sizeof(ebuf)));
        return -1;
    }
    return 0;
}

static uint8_t
pciRead8(pciDevice *dev, unsigned pos)
{
    uint8_t buf;
    pciRead(dev, pos, &buf, sizeof(buf));
    return buf;
}

static uint16_t
pciRead16(pciDevice *dev, unsigned pos)
{
    uint8_t buf[2];
    pciRead(dev, pos, &buf[0], sizeof(buf));
    return (buf[0] << 0) | (buf[1] << 8);
}

static uint32_t
pciRead32(pciDevice *dev, unsigned pos)
{
    uint8_t buf[4];
    pciRead(dev, pos, &buf[0], sizeof(buf));
    return (buf[0] << 0) | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
}

static int
pciWrite(pciDevice *dev, unsigned pos, uint8_t *buf, unsigned buflen)
{
    if (pciOpenConfig(dev) < 0)
        return -1;

    if (lseek(dev->fd, pos, SEEK_SET) != pos ||
        safewrite(dev->fd, buf, buflen) != buflen) {
        char ebuf[1024];
        VIR_WARN("Failed to write to '%s' : %s", dev->path,
                 virStrerror(errno, ebuf, sizeof(ebuf)));
        return -1;
    }
    return 0;
}

static void
pciWrite16(pciDevice *dev, unsigned pos, uint16_t val)
{
    uint8_t buf[2] = { (val >> 0), (val >> 8) };
    pciWrite(dev, pos, &buf[0], sizeof(buf));
}

static void
pciWrite32(pciDevice *dev, unsigned pos, uint32_t val)
{
    uint8_t buf[4] = { (val >> 0), (val >> 8), (val >> 16), (val >> 14) };
    pciWrite(dev, pos, &buf[0], sizeof(buf));
}

typedef int (*pciIterPredicate)(pciDevice *, pciDevice *, void *);

/* Iterate over available PCI devices calling @predicate
 * to compare each one to @dev.
 * Return -1 on error since we don't want to assume it is
 * safe to reset if there is an error.
 */
static int
pciIterDevices(pciIterPredicate predicate,
               pciDevice *dev,
               pciDevice **matched,
               void *data)
{
    DIR *dir;
    struct dirent *entry;
    int ret = 0;
    int rc;

    *matched = NULL;

    VIR_DEBUG("%s %s: iterating over " PCI_SYSFS "devices", dev->id, dev->name);

    dir = opendir(PCI_SYSFS "devices");
    if (!dir) {
        VIR_WARN("Failed to open " PCI_SYSFS "devices");
        return -1;
    }

    while ((entry = readdir(dir))) {
        unsigned int domain, bus, slot, function;
        pciDevice *check;
        char *tmp;

        /* Ignore '.' and '..' */
        if (entry->d_name[0] == '.')
            continue;

        /* expected format: <domain>:<bus>:<slot>.<function> */
        if (/* domain */
            virStrToLong_ui(entry->d_name, &tmp, 16, &domain) < 0 || *tmp != ':' ||
            /* bus */
            virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' ||
            /* slot */
            virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' ||
            /* function */
            virStrToLong_ui(tmp + 1, NULL, 16, &function) < 0) {
            VIR_WARN("Unusual entry in " PCI_SYSFS "devices: %s", entry->d_name);
            continue;
        }

        check = pciGetDevice(domain, bus, slot, function);
        if (!check) {
            ret = -1;
            break;
        }

        rc = predicate(dev, check, data);
        if (rc < 0) {
            /* the predicate returned an error, bail */
            pciFreeDevice(check);
            ret = -1;
            break;
        }
        else if (rc == 1) {
            VIR_DEBUG("%s %s: iter matched on %s", dev->id, dev->name, check->name);
            *matched = check;
            ret = 1;
            break;
        }

        pciFreeDevice(check);
    }
    closedir(dir);
    return ret;
}

static uint8_t
pciFindCapabilityOffset(pciDevice *dev, unsigned capability)
{
    uint16_t status;
    uint8_t pos;

    status = pciRead16(dev, PCI_STATUS);
    if (!(status & PCI_STATUS_CAP_LIST))
        return 0;

    pos = pciRead8(dev, PCI_CAPABILITY_LIST);

    /* Zero indicates last capability, capabilities can't
     * be in the config space header and 0xff is returned
     * by the kernel if we don't have access to this region
     *
     * Note: we're not handling loops or extended
     * capabilities here.
     */
    while (pos >= PCI_CONF_HEADER_LEN && pos != 0xff) {
        uint8_t capid = pciRead8(dev, pos);
        if (capid == capability) {
            VIR_DEBUG("%s %s: found cap 0x%.2x at 0x%.2x",
                      dev->id, dev->name, capability, pos);
            return pos;
        }

        pos = pciRead8(dev, pos + 1);
    }

    VIR_DEBUG("%s %s: failed to find cap 0x%.2x", dev->id, dev->name, capability);

    return 0;
}

static unsigned int
pciFindExtendedCapabilityOffset(pciDevice *dev, unsigned capability)
{
    int ttl;
    unsigned int pos;
    uint32_t header;

    /* minimum 8 bytes per capability */
    ttl = (PCI_EXT_CAP_LIMIT - PCI_EXT_CAP_BASE) / 8;
    pos = PCI_EXT_CAP_BASE;

    while (ttl > 0 && pos >= PCI_EXT_CAP_BASE) {
        header = pciRead32(dev, pos);

        if ((header & PCI_EXT_CAP_ID_MASK) == capability)
            return pos;

        pos = (header >> PCI_EXT_CAP_OFFSET_SHIFT) & PCI_EXT_CAP_OFFSET_MASK;
        ttl--;
    }

    return 0;
}

/* detects whether this device has FLR.  Returns 0 if the device does
 * not have FLR, 1 if it does, and -1 on error
 */
static int
pciDetectFunctionLevelReset(pciDevice *dev)
{
    uint32_t caps;
    uint8_t pos;
    char *path;
    int found;

    /* The PCIe Function Level Reset capability allows
     * individual device functions to be reset without
     * affecting any other functions on the device or
     * any other devices on the bus. This is only common
     * on SR-IOV NICs at the moment.
     */
    if (dev->pcie_cap_pos) {
        caps = pciRead32(dev, dev->pcie_cap_pos + PCI_EXP_DEVCAP);
        if (caps & PCI_EXP_DEVCAP_FLR) {
            VIR_DEBUG("%s %s: detected PCIe FLR capability", dev->id, dev->name);
            return 1;
        }
    }

    /* The PCI AF Function Level Reset capability is
     * the same thing, except for conventional PCI
     * devices. This is not common yet.
     */
    pos = pciFindCapabilityOffset(dev, PCI_CAP_ID_AF);
    if (pos) {
        caps = pciRead16(dev, pos + PCI_AF_CAP);
        if (caps & PCI_AF_CAP_FLR) {
            VIR_DEBUG("%s %s: detected PCI FLR capability", dev->id, dev->name);
            return 1;
        }
    }

    /* there are some buggy devices that do support FLR, but forget to
     * advertise that fact in their capabilities.  However, FLR is *required*
     * to be present for virtual functions (VFs), so if we see that this
     * device is a VF, we just assume FLR works
     */

    if (virAsprintf(&path, PCI_SYSFS "devices/%s/physfn", dev->name) < 0) {
        virReportOOMError();
        return -1;
    }

    found = virFileExists(path);
    VIR_FREE(path);
    if (found) {
        VIR_DEBUG("%s %s: buggy device didn't advertise FLR, but is a VF; forcing flr on",
                  dev->id, dev->name);
        return 1;
    }

    VIR_DEBUG("%s %s: no FLR capability found", dev->id, dev->name);

    return 0;
}

/* Require the device has the PCI Power Management capability
 * and that a D3hot->D0 transition will results in a full
 * internal reset, not just a soft reset.
 */
static unsigned
pciDetectPowerManagementReset(pciDevice *dev)
{
    if (dev->pci_pm_cap_pos) {
        uint32_t ctl;

        /* require the NO_SOFT_RESET bit is clear */
        ctl = pciRead32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL);
        if (!(ctl & PCI_PM_CTRL_NO_SOFT_RESET)) {
            VIR_DEBUG("%s %s: detected PM reset capability", dev->id, dev->name);
            return 1;
        }
    }

    VIR_DEBUG("%s %s: no PM reset capability found", dev->id, dev->name);

    return 0;
}

/* Any active devices on the same domain/bus ? */
static int
pciSharesBusWithActive(pciDevice *dev, pciDevice *check, void *data)
{
    pciDeviceList *inactiveDevs = data;

    /* Different domain, different bus, or simply identical device */
    if (dev->domain != check->domain ||
        dev->bus != check->bus ||
        (dev->slot == check->slot &&
         dev->function == check->function))
        return 0;

    /* same bus, but inactive, i.e. about to be assigned to guest */
    if (inactiveDevs && pciDeviceListFind(inactiveDevs, check))
        return 0;

    return 1;
}

static pciDevice *
pciBusContainsActiveDevices(pciDevice *dev,
                            pciDeviceList *inactiveDevs)
{
    pciDevice *active = NULL;
    if (pciIterDevices(pciSharesBusWithActive,
                       dev, &active, inactiveDevs) < 0)
        return NULL;
    return active;
}

/* Is @check the parent of @dev ? */
static int
pciIsParent(pciDevice *dev, pciDevice *check, void *data)
{
    uint16_t device_class;
    uint8_t header_type, secondary, subordinate;
    pciDevice **best = data;

    if (dev->domain != check->domain)
        return 0;

    /* Is it a bridge? */
    device_class = pciRead16(check, PCI_CLASS_DEVICE);
    if (device_class != PCI_CLASS_BRIDGE_PCI)
        return 0;

    /* Is it a plane? */
    header_type = pciRead8(check, PCI_HEADER_TYPE);
    if ((header_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
        return 0;

    secondary   = pciRead8(check, PCI_SECONDARY_BUS);
    subordinate = pciRead8(check, PCI_SUBORDINATE_BUS);

    VIR_DEBUG("%s %s: found parent device %s", dev->id, dev->name, check->name);

    /* if the secondary bus exactly equals the device's bus, then we found
     * the direct parent.  No further work is necessary
     */
    if (dev->bus == secondary)
        return 1;

    /* otherwise, SRIOV allows VFs to be on different busses then their PFs.
     * In this case, what we need to do is look for the "best" match; i.e.
     * the most restrictive match that still satisfies all of the conditions.
     */
    if (dev->bus > secondary && dev->bus <= subordinate) {
        if (*best == NULL) {
            *best = pciGetDevice(check->domain, check->bus, check->slot,
                                 check->function);
            if (*best == NULL)
                return -1;
        }
        else {
            /* OK, we had already recorded a previous "best" match for the
             * parent.  See if the current device is more restrictive than the
             * best, and if so, make it the new best
             */
            if (secondary > pciRead8(*best, PCI_SECONDARY_BUS)) {
                pciFreeDevice(*best);
                *best = pciGetDevice(check->domain, check->bus, check->slot,
                                     check->function);
                if (*best == NULL)
                    return -1;
            }
        }
    }

    return 0;
}

static int
pciGetParentDevice(pciDevice *dev, pciDevice **parent)
{
    pciDevice *best = NULL;
    int ret;

    *parent = NULL;
    ret = pciIterDevices(pciIsParent, dev, parent, &best);
    if (ret == 1)
        pciFreeDevice(best);
    else if (ret == 0)
        *parent = best;
    return ret;
}

/* Secondary Bus Reset is our sledgehammer - it resets all
 * devices behind a bus.
 */
static int
pciTrySecondaryBusReset(pciDevice *dev,
                        pciDeviceList *inactiveDevs)
{
    pciDevice *parent, *conflict;
    uint8_t config_space[PCI_CONF_LEN];
    uint16_t ctl;
    int ret = -1;

    /* Refuse to do a secondary bus reset if there are other
     * devices/functions behind the bus are used by the host
     * or other guests.
     */
    if ((conflict = pciBusContainsActiveDevices(dev, inactiveDevs))) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Active %s devices on bus with %s, not doing bus reset"),
                       conflict->name, dev->name);
        return -1;
    }

    /* Find the parent bus */
    if (pciGetParentDevice(dev, &parent) < 0)
        return -1;
    if (!parent) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to find parent device for %s"),
                       dev->name);
        return -1;
    }

    VIR_DEBUG("%s %s: doing a secondary bus reset", dev->id, dev->name);

    /* Save and restore the device's config space; we only do this
     * for the supplied device since we refuse to do a reset if there
     * are multiple devices/functions
     */
    if (pciRead(dev, 0, config_space, PCI_CONF_LEN) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to read PCI config space for %s"),
                       dev->name);
        goto out;
    }

    /* Read the control register, set the reset flag, wait 200ms,
     * unset the reset flag and wait 200ms.
     */
    ctl = pciRead16(dev, PCI_BRIDGE_CONTROL);

    pciWrite16(parent, PCI_BRIDGE_CONTROL, ctl | PCI_BRIDGE_CTL_RESET);

    usleep(200 * 1000); /* sleep 200ms */

    pciWrite16(parent, PCI_BRIDGE_CONTROL, ctl);

    usleep(200 * 1000); /* sleep 200ms */

    if (pciWrite(dev, 0, config_space, PCI_CONF_LEN) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to restore PCI config space for %s"),
                       dev->name);
        goto out;
    }
    ret = 0;
out:
    pciFreeDevice(parent);
    return ret;
}

/* Power management reset attempts to reset a device using a
 * D-state transition from D3hot to D0. Note, in detect_pm_reset()
 * above we require the device supports a full internal reset.
 */
static int
pciTryPowerManagementReset(pciDevice *dev)
{
    uint8_t config_space[PCI_CONF_LEN];
    uint32_t ctl;

    if (!dev->pci_pm_cap_pos)
        return -1;

    /* Save and restore the device's config space. */
    if (pciRead(dev, 0, &config_space[0], PCI_CONF_LEN) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to read PCI config space for %s"),
                       dev->name);
        return -1;
    }

    VIR_DEBUG("%s %s: doing a power management reset", dev->id, dev->name);

    ctl = pciRead32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL);
    ctl &= ~PCI_PM_CTRL_STATE_MASK;

    pciWrite32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl|PCI_PM_CTRL_STATE_D3hot);

    usleep(10 * 1000); /* sleep 10ms */

    pciWrite32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl|PCI_PM_CTRL_STATE_D0);

    usleep(10 * 1000); /* sleep 10ms */

    if (pciWrite(dev, 0, &config_space[0], PCI_CONF_LEN) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to restore PCI config space for %s"),
                       dev->name);
        return -1;
    }

    return 0;
}

static int
pciInitDevice(pciDevice *dev)
{
    int flr;

    if (pciOpenConfig(dev) < 0) {
        virReportSystemError(errno,
                             _("Failed to open config space file '%s'"),
                             dev->path);
        return -1;
    }

    dev->pcie_cap_pos   = pciFindCapabilityOffset(dev, PCI_CAP_ID_EXP);
    dev->pci_pm_cap_pos = pciFindCapabilityOffset(dev, PCI_CAP_ID_PM);
    flr = pciDetectFunctionLevelReset(dev);
    if (flr < 0)
        return flr;
    dev->has_flr        = flr;
    dev->has_pm_reset   = pciDetectPowerManagementReset(dev);
    dev->initted        = 1;
    return 0;
}

int
pciResetDevice(pciDevice *dev,
               pciDeviceList *activeDevs,
               pciDeviceList *inactiveDevs)
{
    int ret = -1;

    if (activeDevs && pciDeviceListFind(activeDevs, dev)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Not resetting active device %s"), dev->name);
        return -1;
    }

    if (!dev->initted && pciInitDevice(dev) < 0)
        return -1;

    /* KVM will perform FLR when starting and stopping
     * a guest, so there is no need for us to do it here.
     */
    if (dev->has_flr)
        return 0;

    /* If the device supports PCI power management reset,
     * that's the next best thing because it only resets
     * the function, not the whole device.
     */
    if (dev->has_pm_reset)
        ret = pciTryPowerManagementReset(dev);

    /* Bus reset is not an option with the root bus */
    if (ret < 0 && dev->bus != 0)
        ret = pciTrySecondaryBusReset(dev, inactiveDevs);

    if (ret < 0) {
        virErrorPtr err = virGetLastError();
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Unable to reset PCI device %s: %s"),
                       dev->name,
                       err ? err->message : _("no FLR, PM reset or bus reset available"));
    }

    return ret;
}


static int
pciDriverDir(char **buffer, const char *driver)
{
    VIR_FREE(*buffer);

    if (virAsprintf(buffer, PCI_SYSFS "drivers/%s", driver) < 0) {
        virReportOOMError();
        return -1;
    }

    return 0;
}

static int
pciDriverFile(char **buffer, const char *driver, const char *file)
{
    VIR_FREE(*buffer);

    if (virAsprintf(buffer, PCI_SYSFS "drivers/%s/%s", driver, file) < 0) {
        virReportOOMError();
        return -1;
    }

    return 0;
}

static int
pciDeviceFile(char **buffer, const char *device, const char *file)
{
    VIR_FREE(*buffer);

    if (virAsprintf(buffer, PCI_SYSFS "devices/%s/%s", device, file) < 0) {
        virReportOOMError();
        return -1;
    }

    return 0;
}


static const char *
pciFindStubDriver(void)
{
    char *drvpath = NULL;
    int probed = 0;

recheck:
    if (pciDriverDir(&drvpath, "pci-stub") < 0) {
        return NULL;
    }

    if (virFileExists(drvpath)) {
        VIR_FREE(drvpath);
        return "pci-stub";
    }

    if (pciDriverDir(&drvpath, "pciback") < 0) {
        return NULL;
    }

    if (virFileExists(drvpath)) {
        VIR_FREE(drvpath);
        return "pciback";
    }

    VIR_FREE(drvpath);

    if (!probed) {
        const char *const stubprobe[] = { MODPROBE, "pci-stub", NULL };
        const char *const backprobe[] = { MODPROBE, "pciback", NULL };

        probed = 1;
        /*
         * Probing for pci-stub will succeed regardless of whether
         * on native or Xen kernels.
         * On Xen though, we want to prefer pciback, so probe
         * for that first, because that will only work on Xen
         */
        if (virRun(backprobe, NULL) < 0 &&
            virRun(stubprobe, NULL) < 0) {
            char ebuf[1024];
            VIR_WARN("failed to load pci-stub or pciback drivers: %s",
                     virStrerror(errno, ebuf, sizeof(ebuf)));
            return NULL;
        }

        goto recheck;
    }

    return NULL;
}

static int
pciUnbindDeviceFromStub(pciDevice *dev, const char *driver)
{
    int result = -1;
    char *drvdir = NULL;
    char *path = NULL;

    if (pciDriverDir(&drvdir, driver) < 0)
        goto cleanup;

    if (!dev->unbind_from_stub)
        goto remove_slot;

    /* If the device is bound to stub, unbind it.
     */
    if (pciDeviceFile(&path, dev->name, "driver") < 0)
        goto cleanup;

    if (virFileExists(drvdir) && virFileLinkPointsTo(path, drvdir)) {
        if (pciDriverFile(&path, driver, "unbind") < 0) {
            goto cleanup;
        }

        if (virFileWriteStr(path, dev->name, 0) < 0) {
            virReportSystemError(errno,
                                 _("Failed to unbind PCI device '%s' from %s"),
                                 dev->name, driver);
            goto cleanup;
        }
    }
    dev->unbind_from_stub = 0;

remove_slot:
    if (!dev->remove_slot)
        goto reprobe;

    /* Xen's pciback.ko wants you to use remove_slot on the specific device */
    if (pciDriverFile(&path, driver, "remove_slot") < 0) {
        goto cleanup;
    }

    if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) {
        virReportSystemError(errno,
                             _("Failed to remove slot for PCI device '%s' from %s"),
                             dev->name, driver);
        goto cleanup;
    }
    dev->remove_slot = 0;

reprobe:
    if (!dev->reprobe) {
        result = 0;
        goto cleanup;
    }

    /* Trigger a re-probe of the device is not in the stub's dynamic
     * ID table. If the stub is available, but 'remove_id' isn't
     * available, then re-probing would just cause the device to be
     * re-bound to the stub.
     */
    if (pciDriverFile(&path, driver, "remove_id") < 0) {
        goto cleanup;
    }

    if (!virFileExists(drvdir) || virFileExists(path)) {
        if (virFileWriteStr(PCI_SYSFS "drivers_probe", dev->name, 0) < 0) {
            virReportSystemError(errno,
                                 _("Failed to trigger a re-probe for PCI device '%s'"),
                                 dev->name);
            goto cleanup;
        }
    }

    result = 0;

cleanup:
    /* do not do it again */
    dev->unbind_from_stub = 0;
    dev->remove_slot = 0;
    dev->reprobe = 0;

    VIR_FREE(drvdir);
    VIR_FREE(path);

    return result;
}


static int
pciBindDeviceToStub(pciDevice *dev, const char *driver)
{
    int result = -1;
    char *drvdir = NULL;
    char *path = NULL;
    int reprobe = 0;

    /* check whether the device is already bound to a driver */
    if (pciDriverDir(&drvdir, driver) < 0 ||
        pciDeviceFile(&path, dev->name, "driver") < 0) {
        goto cleanup;
    }

    if (virFileExists(path)) {
        if (virFileLinkPointsTo(path, drvdir)) {
            /* The device is already bound to pci-stub */
            result = 0;
            goto cleanup;
        }
        reprobe = 1;
    }

    /* Add the PCI device ID to the stub's dynamic ID table;
     * this is needed to allow us to bind the device to the stub.
     * Note: if the device is not currently bound to any driver,
     * stub will immediately be bound to the device. Also, note
     * that if a new device with this ID is hotplugged, or if a probe
     * is triggered for such a device, it will also be immediately
     * bound by the stub.
     */
    if (pciDriverFile(&path, driver, "new_id") < 0) {
        goto cleanup;
    }

    if (virFileWriteStr(path, dev->id, 0) < 0) {
        virReportSystemError(errno,
                             _("Failed to add PCI device ID '%s' to %s"),
                             dev->id, driver);
        goto cleanup;
    }

    /* check whether the device is bound to pci-stub when we write dev->id to
     * new_id.
     */
    if (pciDriverDir(&drvdir, driver) < 0 ||
        pciDeviceFile(&path, dev->name, "driver") < 0) {
        goto remove_id;
    }

    if (virFileLinkPointsTo(path, drvdir)) {
        dev->unbind_from_stub = 1;
        dev->remove_slot = 1;
        goto remove_id;
    }

    /* If the device is already bound to a driver, unbind it.
     * Note, this will have rather unpleasant side effects if this
     * PCI device happens to be IDE controller for the disk hosting
     * your root filesystem.
     */
    if (pciDeviceFile(&path, dev->name, "driver/unbind") < 0) {
        goto cleanup;
    }

    if (virFileExists(path)) {
        if (virFileWriteStr(path, dev->name, 0) < 0) {
            virReportSystemError(errno,
                                 _("Failed to unbind PCI device '%s'"),
                                 dev->name);
            goto cleanup;
        }
        dev->reprobe = reprobe;
    }

    /* If the device isn't already bound to pci-stub, try binding it now.
     */
    if (pciDriverDir(&drvdir, driver) < 0 ||
        pciDeviceFile(&path, dev->name, "driver") < 0) {
        goto remove_id;
    }

    if (!virFileLinkPointsTo(path, drvdir)) {
        /* Xen's pciback.ko wants you to use new_slot first */
        if (pciDriverFile(&path, driver, "new_slot") < 0) {
            goto remove_id;
        }

        if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) {
            virReportSystemError(errno,
                                 _("Failed to add slot for PCI device '%s' to %s"),
                                 dev->name, driver);
            goto remove_id;
        }
        dev->remove_slot = 1;

        if (pciDriverFile(&path, driver, "bind") < 0) {
            goto remove_id;
        }

        if (virFileWriteStr(path, dev->name, 0) < 0) {
            virReportSystemError(errno,
                                 _("Failed to bind PCI device '%s' to %s"),
                                 dev->name, driver);
            goto remove_id;
        }
        dev->unbind_from_stub = 1;
    }

remove_id:
    /* If 'remove_id' exists, remove the device id from pci-stub's dynamic
     * ID table so that 'drivers_probe' works below.
     */
    if (pciDriverFile(&path, driver, "remove_id") < 0) {
        /* We do not remove PCI ID from pci-stub, and we cannot reprobe it */
        if (dev->reprobe) {
            VIR_WARN("Could not remove PCI ID '%s' from %s, and the device "
                     "cannot be probed again.", dev->id, driver);
        }
        dev->reprobe = 0;
        goto cleanup;
    }

    if (virFileExists(path) && virFileWriteStr(path, dev->id, 0) < 0) {
        virReportSystemError(errno,
                             _("Failed to remove PCI ID '%s' from %s"),
                             dev->id, driver);

        /* remove PCI ID from pci-stub failed, and we cannot reprobe it */
        if (dev->reprobe) {
            VIR_WARN("Failed to remove PCI ID '%s' from %s, and the device "
                     "cannot be probed again.", dev->id, driver);
        }
        dev->reprobe = 0;
        goto cleanup;
    }

    result = 0;

cleanup:
    VIR_FREE(drvdir);
    VIR_FREE(path);

    if (result < 0) {
        pciUnbindDeviceFromStub(dev, driver);
    }

    return result;
}

int
pciDettachDevice(pciDevice *dev,
                 pciDeviceList *activeDevs,
                 pciDeviceList *inactiveDevs)
{
    const char *driver = pciFindStubDriver();
    if (!driver) {
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("cannot find any PCI stub module"));
        return -1;
    }

    if (activeDevs && pciDeviceListFind(activeDevs, dev)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Not detaching active device %s"), dev->name);
        return -1;
    }

    if (pciBindDeviceToStub(dev, driver) < 0)
        return -1;

    /* Add the dev into list inactiveDevs */
    if (inactiveDevs && !pciDeviceListFind(inactiveDevs, dev)) {
        if (pciDeviceListAdd(inactiveDevs, dev) < 0)
            return -1;
    }

    return 0;
}

int
pciReAttachDevice(pciDevice *dev,
                  pciDeviceList *activeDevs,
                  pciDeviceList *inactiveDevs)
{
    const char *driver = pciFindStubDriver();
    if (!driver) {
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("cannot find any PCI stub module"));
        return -1;
    }

    if (activeDevs && pciDeviceListFind(activeDevs, dev)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Not reattaching active device %s"), dev->name);
        return -1;
    }

    if (pciUnbindDeviceFromStub(dev, driver) < 0)
        return -1;

    /* Steal the dev from list inactiveDevs */
    if (inactiveDevs)
        pciDeviceListSteal(inactiveDevs, dev);

    return 0;
}

/* Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
 * the host when doing device passthrough.  This can lead to a race
 * condition where the hypervisor is still cleaning up the device while
 * libvirt is trying to re-attach it to the host device driver.  To avoid
 * this situation, we look through /proc/iomem, and if the hypervisor is
 * still holding onto the bar (denoted by the string in the matcher variable),
 * then we can wait around a bit for that to clear up.
 *
 * A typical /proc/iomem looks like this (snipped for brevity):
 * 00010000-0008efff : System RAM
 * 0008f000-0008ffff : reserved
 * ...
 * 00100000-cc9fcfff : System RAM
 *   00200000-00483d3b : Kernel code
 *   00483d3c-005c88df : Kernel data
 * cc9fd000-ccc71fff : ACPI Non-volatile Storage
 * ...
 * d0200000-d02fffff : PCI Bus #05
 *   d0200000-d021ffff : 0000:05:00.0
 *     d0200000-d021ffff : e1000e
 *   d0220000-d023ffff : 0000:05:00.0
 *     d0220000-d023ffff : e1000e
 * ...
 * f0000000-f0003fff : 0000:00:1b.0
 *   f0000000-f0003fff : kvm_assigned_device
 *
 * Returns 0 if we are clear to continue, and 1 if the hypervisor is still
 * holding onto the resource.
 */
int
pciWaitForDeviceCleanup(pciDevice *dev, const char *matcher)
{
    FILE *fp;
    char line[160];
    char *tmp;
    unsigned long long start, end;
    unsigned int domain, bus, slot, function;
    int in_matching_device;
    int ret;
    size_t match_depth;

    fp = fopen("/proc/iomem", "r");
    if (!fp) {
        /* If we failed to open iomem, we just basically ignore the error.  The
         * unbind might succeed anyway, and besides, it's very likely we have
         * no way to report the error
         */
        VIR_DEBUG("Failed to open /proc/iomem, trying to continue anyway");
        return 0;
    }

    ret = 0;
    in_matching_device = 0;
    match_depth = 0;
    while (fgets(line, sizeof(line), fp) != 0) {
        /* the logic here is a bit confusing.  For each line, we look to
         * see if it matches the domain:bus:slot.function we were given.
         * If this line matches the DBSF, then any subsequent lines indented
         * by 2 spaces are the PCI regions for this device.  It's also
         * possible that none of the PCI regions are currently mapped, in
         * which case we have no indented regions.  This code handles all
         * of these situations
         */
        if (in_matching_device && (strspn(line, " ") == (match_depth + 2))) {
            /* expected format: <start>-<end> : <suffix> */
            if (/* start */
                virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' ||
                /* end */
                virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 ||
                (tmp = STRSKIP(tmp, " : ")) == NULL)
                continue;

            if (STRPREFIX(tmp, matcher)) {
                ret = 1;
                break;
            }
        }
        else {
            in_matching_device = 0;

            /* expected format: <start>-<end> : <domain>:<bus>:<slot>.<function> */
            if (/* start */
                virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' ||
                /* end */
                virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 ||
                (tmp = STRSKIP(tmp, " : ")) == NULL ||
                /* domain */
                virStrToLong_ui(tmp, &tmp, 16, &domain) < 0 || *tmp != ':' ||
                /* bus */
                virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' ||
                /* slot */
                virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' ||
                /* function */
                virStrToLong_ui(tmp + 1, &tmp, 16, &function) < 0 || *tmp != '\n')
                continue;

            if (domain != dev->domain || bus != dev->bus || slot != dev->slot ||
                function != dev->function)
                continue;
            in_matching_device = 1;
            match_depth = strspn(line, " ");
        }
    }

    VIR_FORCE_FCLOSE(fp);

    return ret;
}

static char *
pciReadDeviceID(pciDevice *dev, const char *id_name)
{
    char *path = NULL;
    char *id_str;

    if (pciDeviceFile(&path, dev->name, id_name) < 0) {
        return NULL;
    }

    /* ID string is '0xNNNN\n' ... i.e. 7 bytes */
    if (virFileReadAll(path, 7, &id_str) < 0) {
        VIR_FREE(path);
        return NULL;
    }

    VIR_FREE(path);

    /* Check for 0x suffix */
    if (id_str[0] != '0' || id_str[1] != 'x') {
        VIR_FREE(id_str);
        return NULL;
    }

    /* Chop off the newline; we know the string is 7 bytes */
    id_str[6] = '\0';

    return id_str;
}

int
pciGetDeviceAddrString(unsigned domain,
                       unsigned bus,
                       unsigned slot,
                       unsigned function,
                       char **pciConfigAddr)
{
    pciDevice *dev = NULL;
    int ret = -1;

    dev = pciGetDevice(domain, bus, slot, function);
    if (dev != NULL) {
        if ((*pciConfigAddr = strdup(dev->name)) == NULL) {
            virReportOOMError();
            goto cleanup;
        }
        ret = 0;
    }

cleanup:
    pciFreeDevice(dev);
    return ret;
}

pciDevice *
pciGetDevice(unsigned domain,
             unsigned bus,
             unsigned slot,
             unsigned function)
{
    pciDevice *dev;
    char *vendor = NULL;
    char *product = NULL;

    if (VIR_ALLOC(dev) < 0) {
        virReportOOMError();
        return NULL;
    }

    dev->fd       = -1;
    dev->domain   = domain;
    dev->bus      = bus;
    dev->slot     = slot;
    dev->function = function;

    if (snprintf(dev->name, sizeof(dev->name), "%.4x:%.2x:%.2x.%.1x",
                 dev->domain, dev->bus, dev->slot,
                 dev->function) >= sizeof(dev->name)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("dev->name buffer overflow: %.4x:%.2x:%.2x.%.1x"),
                       dev->domain, dev->bus, dev->slot, dev->function);
        goto error;
    }
    if (virAsprintf(&dev->path, PCI_SYSFS "devices/%s/config",
                    dev->name) < 0) {
        virReportOOMError();
        goto error;
    }

    if (access(dev->path, F_OK) != 0) {
        virReportSystemError(errno,
                             _("Device %s not found: could not access %s"),
                             dev->name, dev->path);
        goto error;
    }

    vendor  = pciReadDeviceID(dev, "vendor");
    product = pciReadDeviceID(dev, "device");

    if (!vendor || !product) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to read product/vendor ID for %s"),
                       dev->name);
        goto error;
    }

    /* strings contain '0x' prefix */
    if (snprintf(dev->id, sizeof(dev->id), "%s %s", &vendor[2],
                 &product[2]) >= sizeof(dev->id)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("dev->id buffer overflow: %s %s"),
                       &vendor[2], &product[2]);
        goto error;
    }

    VIR_DEBUG("%s %s: initialized", dev->id, dev->name);

cleanup:
    VIR_FREE(product);
    VIR_FREE(vendor);
    return dev;

error:
    pciFreeDevice(dev);
    dev = NULL;
    goto cleanup;
}

void
pciFreeDevice(pciDevice *dev)
{
    if (!dev)
        return;
    VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
    pciCloseConfig(dev);
    VIR_FREE(dev->path);
    VIR_FREE(dev);
}

const char *
pciDeviceGetName(pciDevice *dev)
{
    return dev->name;
}

void pciDeviceSetManaged(pciDevice *dev, unsigned managed)
{
    dev->managed = !!managed;
}

unsigned pciDeviceGetManaged(pciDevice *dev)
{
    return dev->managed;
}

unsigned
pciDeviceGetUnbindFromStub(pciDevice *dev)
{
    return dev->unbind_from_stub;
}

void
pciDeviceSetUnbindFromStub(pciDevice *dev, unsigned unbind)
{
    dev->unbind_from_stub = !!unbind;
}

unsigned
pciDeviceGetRemoveSlot(pciDevice *dev)
{
    return dev->remove_slot;
}

void
pciDeviceSetRemoveSlot(pciDevice *dev, unsigned remove_slot)
{
    dev->remove_slot = !!remove_slot;
}

unsigned
pciDeviceGetReprobe(pciDevice *dev)
{
    return dev->reprobe;
}

void
pciDeviceSetReprobe(pciDevice *dev, unsigned reprobe)
{
    dev->reprobe = !!reprobe;
}

void
pciDeviceSetUsedBy(pciDevice *dev, const char *name)
{
    dev->used_by = name;
}

const char *
pciDeviceGetUsedBy(pciDevice *dev)
{
    return dev->used_by;
}

void pciDeviceReAttachInit(pciDevice *pci)
{
    pci->unbind_from_stub = 1;
    pci->remove_slot = 1;
    pci->reprobe = 1;
}


pciDeviceList *
pciDeviceListNew(void)
{
    pciDeviceList *list;

    if (VIR_ALLOC(list) < 0) {
        virReportOOMError();
        return NULL;
    }

    return list;
}

void
pciDeviceListFree(pciDeviceList *list)
{
    int i;

    if (!list)
        return;

    for (i = 0; i < list->count; i++) {
        pciFreeDevice(list->devs[i]);
        list->devs[i] = NULL;
    }

    list->count = 0;
    VIR_FREE(list->devs);
    VIR_FREE(list);
}

int
pciDeviceListAdd(pciDeviceList *list,
                 pciDevice *dev)
{
    if (pciDeviceListFind(list, dev)) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Device %s is already in use"), dev->name);
        return -1;
    }

    if (VIR_REALLOC_N(list->devs, list->count+1) < 0) {
        virReportOOMError();
        return -1;
    }

    list->devs[list->count++] = dev;

    return 0;
}

pciDevice *
pciDeviceListGet(pciDeviceList *list,
                 int idx)
{
    if (idx >= list->count)
        return NULL;
    if (idx < 0)
        return NULL;

    return list->devs[idx];
}

int
pciDeviceListCount(pciDeviceList *list)
{
    return list->count;
}

pciDevice *
pciDeviceListSteal(pciDeviceList *list,
                   pciDevice *dev)
{
    pciDevice *ret = NULL;
    int i;

    for (i = 0; i < list->count; i++) {
        if (list->devs[i]->domain   != dev->domain ||
            list->devs[i]->bus      != dev->bus    ||
            list->devs[i]->slot     != dev->slot   ||
            list->devs[i]->function != dev->function)
            continue;

        ret = list->devs[i];

        if (i != --list->count)
            memmove(&list->devs[i],
                    &list->devs[i+1],
                    sizeof(*list->devs) * (list->count-i));

        if (VIR_REALLOC_N(list->devs, list->count) < 0) {
            ; /* not fatal */
        }

        break;
    }
    return ret;
}

void
pciDeviceListDel(pciDeviceList *list,
                 pciDevice *dev)
{
    pciDevice *ret = pciDeviceListSteal(list, dev);
    if (ret)
        pciFreeDevice(ret);
}

pciDevice *
pciDeviceListFind(pciDeviceList *list, pciDevice *dev)
{
    int i;

    for (i = 0; i < list->count; i++)
        if (list->devs[i]->domain   == dev->domain &&
            list->devs[i]->bus      == dev->bus    &&
            list->devs[i]->slot     == dev->slot   &&
            list->devs[i]->function == dev->function)
            return list->devs[i];
    return NULL;
}


int pciDeviceFileIterate(pciDevice *dev,
                         pciDeviceFileActor actor,
                         void *opaque)
{
    char *pcidir = NULL;
    char *file = NULL;
    DIR *dir = NULL;
    int ret = -1;
    struct dirent *ent;

    if (virAsprintf(&pcidir, "/sys/bus/pci/devices/%04x:%02x:%02x.%x",
                    dev->domain, dev->bus, dev->slot, dev->function) < 0) {
        virReportOOMError();
        goto cleanup;
    }

    if (!(dir = opendir(pcidir))) {
        virReportSystemError(errno,
                             _("cannot open %s"), pcidir);
        goto cleanup;
    }

    while ((ent = readdir(dir)) != NULL) {
        /* Device assignment requires:
         *   $PCIDIR/config, $PCIDIR/resource, $PCIDIR/resourceNNN,
         *   $PCIDIR/rom, $PCIDIR/reset
         */
        if (STREQ(ent->d_name, "config") ||
            STRPREFIX(ent->d_name, "resource") ||
            STREQ(ent->d_name, "rom") ||
            STREQ(ent->d_name, "reset")) {
            if (virAsprintf(&file, "%s/%s", pcidir, ent->d_name) < 0) {
                virReportOOMError();
                goto cleanup;
            }
            if ((actor)(dev, file, opaque) < 0)
                goto cleanup;

            VIR_FREE(file);
        }
    }

    ret = 0;

cleanup:
    if (dir)
        closedir(dir);
    VIR_FREE(file);
    VIR_FREE(pcidir);
    return ret;
}

static int
pciDeviceDownstreamLacksACS(pciDevice *dev)
{
    uint16_t flags;
    uint16_t ctrl;
    unsigned int pos;

    if (!dev->initted && pciInitDevice(dev) < 0)
        return -1;

    pos = dev->pcie_cap_pos;
    if (!pos || pciRead16(dev, PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI)
        return 0;

    flags = pciRead16(dev, pos + PCI_EXP_FLAGS);
    if (((flags & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_DOWNSTREAM)
        return 0;

    pos = pciFindExtendedCapabilityOffset(dev, PCI_EXT_CAP_ID_ACS);
    if (!pos) {
        VIR_DEBUG("%s %s: downstream port lacks ACS", dev->id, dev->name);
        return 1;
    }

    ctrl = pciRead16(dev, pos + PCI_EXT_ACS_CTRL);
    if ((ctrl & PCI_EXT_CAP_ACS_ENABLED) != PCI_EXT_CAP_ACS_ENABLED) {
        VIR_DEBUG("%s %s: downstream port has ACS disabled",
                  dev->id, dev->name);
        return 1;
    }

    return 0;
}

static int
pciDeviceIsBehindSwitchLackingACS(pciDevice *dev)
{
    pciDevice *parent;

    if (pciGetParentDevice(dev, &parent) < 0)
        return -1;
    if (!parent) {
        /* if we have no parent, and this is the root bus, ACS doesn't come
         * into play since devices on the root bus can't P2P without going
         * through the root IOMMU.
         */
        if (dev->bus == 0)
            return 0;
        else {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("Failed to find parent device for %s"),
                           dev->name);
            return -1;
        }
    }

    /* XXX we should rather fail when we can't find device's parent and
     * stop the loop when we get to root instead of just stopping when no
     * parent can be found
     */
    do {
        pciDevice *tmp;
        int acs;
        int ret;

        acs = pciDeviceDownstreamLacksACS(parent);

        if (acs) {
            pciFreeDevice(parent);
            if (acs < 0)
                return -1;
            else
                return 1;
        }

        tmp = parent;
        ret = pciGetParentDevice(parent, &parent);
        pciFreeDevice(tmp);
        if (ret < 0)
            return -1;
    } while (parent);

    return 0;
}

int pciDeviceIsAssignable(pciDevice *dev,
                          int strict_acs_check)
{
    int ret;

    /* XXX This could be a great place to actually check that a non-managed
     * device isn't in use, e.g. by checking that device is either un-bound
     * or bound to a stub driver.
     */

    ret = pciDeviceIsBehindSwitchLackingACS(dev);
    if (ret < 0)
        return 0;

    if (ret) {
        if (!strict_acs_check) {
            VIR_DEBUG("%s %s: strict ACS check disabled; device assignment allowed",
                      dev->id, dev->name);
        } else {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("Device %s is behind a switch lacking ACS and "
                             "cannot be assigned"),
                           dev->name);
            return 0;
        }
    }

    return 1;
}

#ifdef __linux__

/*
 * returns true if equal
 */
static bool
pciConfigAddressEqual(struct pci_config_address *bdf1,
                      struct pci_config_address *bdf2)
{
    return ((bdf1->domain == bdf2->domain) &&
            (bdf1->bus == bdf2->bus) &&
            (bdf1->slot == bdf2->slot) &&
            (bdf1->function == bdf2->function));
}

static int
logStrToLong_ui(char const *s,
                char **end_ptr,
                int base,
                unsigned int *result)
{
    int ret = 0;

    ret = virStrToLong_ui(s, end_ptr, base, result);
    if (ret != 0) {
        VIR_ERROR(_("Failed to convert '%s' to unsigned int"), s);
    } else {
        VIR_DEBUG("Converted '%s' to unsigned int %u", s, *result);
    }

    return ret;
}

static int
pciParsePciConfigAddress(char *address,
                         struct pci_config_address *bdf)
{
    char *p = NULL;
    int ret = -1;

    if ((address == NULL) || (logStrToLong_ui(address, &p, 16,
                                              &bdf->domain) == -1)) {
        goto out;
    }

    if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
                                        &bdf->bus) == -1)) {
        goto out;
    }

    if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
                                        &bdf->slot) == -1)) {
        goto out;
    }

    if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
                                        &bdf->function) == -1)) {
        goto out;
    }

    ret = 0;

out:
    return ret;
}

static int
pciGetPciConfigAddressFromSysfsDeviceLink(const char *device_link,
                                          struct pci_config_address **bdf)
{
    char *config_address = NULL;
    char *device_path = NULL;
    char errbuf[64];
    int ret = -1;

    VIR_DEBUG("Attempting to resolve device path from device link '%s'",
              device_link);

    if (!virFileExists(device_link)) {
        VIR_DEBUG("sysfs_path '%s' does not exist", device_link);
        return ret;
    }

    device_path = canonicalize_file_name(device_link);
    if (device_path == NULL) {
        memset(errbuf, '\0', sizeof(errbuf));
        virReportSystemError(errno,
                             _("Failed to resolve device link '%s'"),
                             device_link);
        return ret;
    }

    config_address = basename(device_path);
    if (VIR_ALLOC(*bdf) != 0) {
        virReportOOMError();
        goto out;
    }

    if (pciParsePciConfigAddress(config_address, *bdf) != 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Failed to parse PCI config address '%s'"),
                       config_address);
        VIR_FREE(*bdf);
        goto out;
    }

    VIR_DEBUG("pci_config_address %.4x:%.2x:%.2x.%.1x",
              (*bdf)->domain,
              (*bdf)->bus,
              (*bdf)->slot,
              (*bdf)->function);

    ret = 0;

out:
    VIR_FREE(device_path);

    return ret;
}

/*
 * Returns Physical function given a virtual function
 */
int
pciGetPhysicalFunction(const char *vf_sysfs_path,
                       struct pci_config_address **physical_function)
{
    int ret = -1;
    char *device_link = NULL;

    VIR_DEBUG("Attempting to get SR IOV physical function for device "
              "with sysfs path '%s'", vf_sysfs_path);

    if (virBuildPath(&device_link, vf_sysfs_path, "physfn") == -1) {
        virReportOOMError();
        return ret;
    } else {
        ret = pciGetPciConfigAddressFromSysfsDeviceLink(device_link,
                                                        physical_function);
    }

    VIR_FREE(device_link);

    return ret;
}

/*
 * Returns virtual functions of a physical function
 */
int
pciGetVirtualFunctions(const char *sysfs_path,
                       struct pci_config_address ***virtual_functions,
                       unsigned int *num_virtual_functions)
{
    int ret = -1;
    DIR *dir = NULL;
    struct dirent *entry = NULL;
    char *device_link = NULL;
    char errbuf[64];

    VIR_DEBUG("Attempting to get SR IOV virtual functions for device"
              "with sysfs path '%s'", sysfs_path);

    dir = opendir(sysfs_path);
    if (dir == NULL) {
        memset(errbuf, '\0', sizeof(errbuf));
        virReportSystemError(errno,
                             _("Failed to open dir '%s'"),
                             sysfs_path);
        return ret;
    }

    *virtual_functions = NULL;
    *num_virtual_functions = 0;
    while ((entry = readdir(dir))) {
        if (STRPREFIX(entry->d_name, "virtfn")) {

            if (virBuildPath(&device_link, sysfs_path, entry->d_name) == -1) {
                virReportOOMError();
                goto out;
            }

            VIR_DEBUG("Number of virtual functions: %d",
                      *num_virtual_functions);
            if (VIR_REALLOC_N(*virtual_functions,
                (*num_virtual_functions) + 1) != 0) {
                virReportOOMError();
                VIR_FREE(device_link);
                goto out;
            }

            if (pciGetPciConfigAddressFromSysfsDeviceLink(device_link,
                &((*virtual_functions)[*num_virtual_functions])) !=
                SRIOV_FOUND) {
                /* We should not get back SRIOV_NOT_FOUND in this
                 * case, so if we do, it's an error. */
                virReportError(VIR_ERR_INTERNAL_ERROR,
                               _("Failed to get SR IOV function from device "
                               "link '%s'"), device_link);
                VIR_FREE(device_link);
                goto out;
            } else {
                (*num_virtual_functions)++;
            }
            VIR_FREE(device_link);
        }
    }

    ret = 0;

out:
    if (dir)
        closedir(dir);

    return ret;
}

/*
 * Returns 1 if vf device is a virtual function, 0 if not, -1 on error
 */
int
pciDeviceIsVirtualFunction(const char *vf_sysfs_device_link)
{
    char *vf_sysfs_physfn_link = NULL;
    int ret = -1;

    if (virAsprintf(&vf_sysfs_physfn_link, "%s/physfn",
        vf_sysfs_device_link) < 0) {
        virReportOOMError();
        return ret;
    }

    ret = virFileExists(vf_sysfs_physfn_link);

    VIR_FREE(vf_sysfs_physfn_link);

    return ret;
}

/*
 * Returns the sriov virtual function index of vf given its pf
 */
int
pciGetVirtualFunctionIndex(const char *pf_sysfs_device_link,
                           const char *vf_sysfs_device_link,
                           int *vf_index)
{
    int ret = -1, i;
    unsigned int num_virt_fns = 0;
    struct pci_config_address *vf_bdf = NULL;
    struct pci_config_address **virt_fns = NULL;

    if (pciGetPciConfigAddressFromSysfsDeviceLink(vf_sysfs_device_link,
        &vf_bdf) < 0)
        return ret;

    if (pciGetVirtualFunctions(pf_sysfs_device_link, &virt_fns,
        &num_virt_fns) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Error getting physical function's '%s' "
                      "virtual_functions"), pf_sysfs_device_link);
        goto out;
    }

    for (i = 0; i < num_virt_fns; i++) {
         if (pciConfigAddressEqual(vf_bdf, virt_fns[i])) {
             *vf_index = i;
             ret = 0;
             break;
         }
    }

out:

    /* free virtual functions */
    for (i = 0; i < num_virt_fns; i++)
         VIR_FREE(virt_fns[i]);

    VIR_FREE(virt_fns);
    VIR_FREE(vf_bdf);

    return ret;
}

/*
 * Returns a path to the PCI sysfs file given the BDF of the PCI function
 */

int
pciSysfsFile(char *pciDeviceName, char **pci_sysfs_device_link)
{
    if (virAsprintf(pci_sysfs_device_link, PCI_SYSFS "devices/%s",
                    pciDeviceName) < 0) {
        virReportOOMError();
        return -1;
    }

    return 0;
}

int
pciConfigAddressToSysfsFile(struct pci_config_address *dev,
                            char **pci_sysfs_device_link)
{
    if (virAsprintf(pci_sysfs_device_link,
                    PCI_SYSFS "devices/%04x:%02x:%02x.%x", dev->domain,
                    dev->bus, dev->slot, dev->function) < 0) {
        virReportOOMError();
        return -1;
    }

    return 0;
}

/*
 * Returns the network device name of a pci device
 */
int
pciDeviceNetName(char *device_link_sysfs_path, char **netname)
{
     char *pcidev_sysfs_net_path = NULL;
     int ret = -1;
     DIR *dir = NULL;
     struct dirent *entry = NULL;

     if (virBuildPath(&pcidev_sysfs_net_path, device_link_sysfs_path,
         "net") == -1) {
         virReportOOMError();
         return -1;
     }

     dir = opendir(pcidev_sysfs_net_path);
     if (dir == NULL)
         goto out;

     while ((entry = readdir(dir))) {
            if (STREQ(entry->d_name, ".") ||
                STREQ(entry->d_name, ".."))
                continue;

            /* Assume a single directory entry */
            *netname = strdup(entry->d_name);
            if (!*netname)
                virReportOOMError();
            else
                ret = 0;
            break;
     }

     closedir(dir);

out:
     VIR_FREE(pcidev_sysfs_net_path);

     return ret;
}

int
pciDeviceGetVirtualFunctionInfo(const char *vf_sysfs_device_path,
                                char **pfname, int *vf_index)
{
    struct pci_config_address *pf_config_address = NULL;
    char *pf_sysfs_device_path = NULL;
    int ret = -1;

    if (pciGetPhysicalFunction(vf_sysfs_device_path, &pf_config_address) < 0)
        return ret;

    if (pciConfigAddressToSysfsFile(pf_config_address,
                                    &pf_sysfs_device_path) < 0) {

        VIR_FREE(pf_config_address);
        return ret;
    }

    if (pciGetVirtualFunctionIndex(pf_sysfs_device_path, vf_sysfs_device_path,
        vf_index) < 0)
        goto cleanup;

    ret = pciDeviceNetName(pf_sysfs_device_path, pfname);

cleanup:
    VIR_FREE(pf_config_address);
    VIR_FREE(pf_sysfs_device_path);

    return ret;
}

#else
static const char *unsupported = N_("not supported on non-linux platforms");

int
pciGetPhysicalFunction(const char *vf_sysfs_path ATTRIBUTE_UNUSED,
              struct pci_config_address **physical_function ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}

int
pciGetVirtualFunctions(const char *sysfs_path ATTRIBUTE_UNUSED,
             struct pci_config_address ***virtual_functions ATTRIBUTE_UNUSED,
             unsigned int *num_virtual_functions ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}

int
pciDeviceIsVirtualFunction(const char *vf_sysfs_device_link ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}

int
pciGetVirtualFunctionIndex(const char *pf_sysfs_device_link ATTRIBUTE_UNUSED,
                           const char *vf_sysfs_device_link ATTRIBUTE_UNUSED,
                           int *vf_index ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;

}

int
pciConfigAddressToSysfsFile(struct pci_config_address *dev ATTRIBUTE_UNUSED,
                            char **pci_sysfs_device_link ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}

int
pciDeviceNetName(char *device_link_sysfs_path ATTRIBUTE_UNUSED,
                 char **netname ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}

int
pciDeviceGetVirtualFunctionInfo(const char *vf_sysfs_device_path ATTRIBUTE_UNUSED,
                                char **pfname ATTRIBUTE_UNUSED,
                                int *vf_index ATTRIBUTE_UNUSED)
{
    virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
    return -1;
}
#endif /* __linux__ */