Link: https://lore.kernel.org/r/20230110180018.288460217@linuxfoundation.orgTested-by: NRonald Warsow <rwarsow@gmx.de>
Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NShuah Khan <skhan@linuxfoundation.org>
Tested-by: NTakeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: NFenil Jain <fkjainco@gmail.com>
Tested-by: NRudi Heitbaum <rudi@heitbaum.com>
Tested-by: NJon Hunter <jonathanh@nvidia.com>
Tested-by: NRon Economos <re@w6rz.net>
Tested-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: NSalvatore Bonaccorso <carnil@debian.org>
Tested-by: NLinux Kernel Functional Testing <lkft@linaro.org>
Tested-by: NAllen Pais <apais@linux.microsoft.com>
Tested-by: NJustin M. Forbes <jforbes@fedoraproject.org>
Tested-by: NConor Dooley <conor.dooley@microchip.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NBagas Sanjaya <bagasdotme@gmail.com>
Tested-by: NKelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f9b09cc upstream.

We are seeing system stuck on some specific platforms due to
WLAN chip fails to wakeup from D3cold state.

With this flag, firmware will send PME message during wakeup
and this issue is gone.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: NBaochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 196dff27 upstream.

Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.

This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:

struct linux_efi_random_seed {
      u32     size; // of the 'seed' array in bytes
      u8      seed[];
};

The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:

LINUX_EFI_RANDOM_SEED_TABLE_GUID        1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b

Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.

In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
       size on the consumer end, memzero() it and drop a needless printk]
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6217e9f0 upstream.

Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.

Fixes: 963bbdb3 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 963bbdb3 upstream.

Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.

MIPI sequence v4 also adds a flag to fall back to non-native sequences.

v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
  too (Ville)
- References instead of Closes issue 6131 because this does not fix everything

v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)

v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)

v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 797805d8 upstream.

"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.

Fixes: e2f34481 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: NWilliam Liu <will@willsroot.io>
Signed-off-by: NHrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: NNamjae Jeon <linkinjeon@kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cdfb2fef upstream.

Currently, smb2_tree_connect doesn't send an error response packet on
error.

This causes libsmb2 to skip the specific error code and fail with the
following:
 smb2_service failed with : Failed to parse fixed part of command
 payload. Unexpected size of Error reply. Expected 9, got 8
Signed-off-by: NMarios Makassikis <mmakassikis@freebox.fr>
Acked-by: NNamjae Jeon <linkinjeon@kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83dcedd5 upstream.

If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.

Fixes: 0626e664 ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: NSergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: NNamjae Jeon <linkinjeon@kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d73a27b8 ]

[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:

  BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
  kernel BUG at fs/btrfs/extent_io.c:2380!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G           OE      6.0.0-5-amd64 #1  Debian 6.0.10-2
  Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
  Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
  RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
  Call Trace:
   <TASK>
   clean_io_failure+0x14d/0x180 [btrfs]
   end_bio_extent_readpage+0x412/0x6e0 [btrfs]
   ? __switch_to+0x106/0x420
   process_one_work+0x1c7/0x380
   worker_thread+0x4d/0x380
   ? rescuer_thread+0x3a0/0x3a0
   kthread+0xe9/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x22/0x30

[CAUSE]

Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).

Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.

The check looks like this:

		ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
				      &map_length, &bioc, mirror_num);
		if (ret)
			goto out_counter_dec;
		BUG_ON(mirror_num != bioc->mirror_num);

But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:

	if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
	    !need_full_stripe(op) && dev_replace->tgtdev != NULL) {
		ret = get_extra_mirror_from_replace(fs_info, logical, *length,
						    dev_replace->srcdev->devid,
						    &mirror_num,
					    &physical_to_patch_in_first_stripe);
		patch_the_first_stripe_for_dev_replace = 1;
	}

Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().

But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.

Thus in that case, we don't need to do anything but let the replace
routine to handle it.

[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device.
Reported-by: N小太 <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f3c23bea ]

[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
 because we are using += instead of = operator.

[How]
Assign values in loop with = operator.
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NSamson Tam <samson.tam@amd.com>
Reviewed-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x, 6.1.x
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6d4727c8 ]

[WHY?]
Some configurations are constructed with very marginal DET buffers relative to
the worst possible time required to fetch a swath.

[HOW?]
Add a check to see that the DET buffer allocated for each pipe can hide the
latency for all pipes to fetch at least one swath.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBrian Chang <Brian.Chang@amd.com>
Signed-off-by: NDillon Varone <Dillon.Varone@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Stable-dep-of: f3c23bea ("drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0")
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a26116c1 ]

The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.

Cc: stable@vger.kernel.org
Fixes: 0e9911fa ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: NRafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
Reviewed-by: NSuwan Kim <suwan.kim027@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 258896fc ]

Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().
Signed-off-by: NDmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Stable-dep-of: a26116c1 ("virtio_blk: Fix signedness bug in virtblk_prep_rq()")
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 704f3384 upstream.

Check carefully on root debugfs available when destroying vgpu,
e.g in remove case drm minor's debugfs root might already be destroyed,
which led to kernel oops like below.

Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14
BUG: kernel NULL pointer dereference, address: 0000000000000150
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6
Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022
RIP: 0010:__lock_acquire+0x5e2/0x1f90
Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0
RSP: 0018:ffff9f770274f948 EFLAGS: 00010046
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 lock_acquire+0xbf/0x2b0
 ? simple_recursive_removal+0xa5/0x2b0
 ? lock_release+0x13d/0x2d0
 down_write+0x2a/0xd0
 ? simple_recursive_removal+0xa5/0x2b0
 simple_recursive_removal+0xa5/0x2b0
 ? start_creating.part.0+0x110/0x110
 ? _raw_spin_unlock+0x29/0x40
 debugfs_remove+0x40/0x60
 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt]
 intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt]
 intel_vgpu_release_dev+0xe/0x20 [kvmgt]
 device_release+0x30/0x80
 kobject_put+0x79/0x1b0
 device_release_driver_internal+0x1b8/0x230
 bus_remove_device+0xec/0x160
 device_del+0x189/0x400
 ? up_write+0x9c/0x1b0
 ? mdev_device_remove_common+0x60/0x60 [mdev]
 mdev_device_remove_common+0x22/0x60 [mdev]
 mdev_device_remove_cb+0x17/0x20 [mdev]
 device_for_each_child+0x56/0x80
 mdev_unregister_parent+0x5a/0x81 [mdev]
 intel_gvt_clean_device+0x2d/0xe0 [kvmgt]
 intel_gvt_driver_remove+0x2e/0xb0 [i915]
 i915_driver_remove+0xac/0x100 [i915]
 i915_pci_remove+0x1a/0x30 [i915]
 pci_device_remove+0x31/0xa0
 device_release_driver_internal+0x1b8/0x230
 unbind_store+0xd8/0x100
 kernfs_fop_write_iter+0x156/0x210
 vfs_write+0x236/0x4a0
 ksys_write+0x61/0xd0
 do_syscall_64+0x55/0x80
 ? find_held_lock+0x2b/0x80
 ? lock_release+0x13d/0x2d0
 ? up_read+0x17/0x20
 ? lock_is_held_type+0xe3/0x140
 ? asm_exc_page_fault+0x22/0x30
 ? lockdep_hardirqs_on+0x7d/0x100
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc9b2c9e0c4
Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4
RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001
RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30
R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00
 </TASK>
Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm_multipath kvmgt mdev vfio_iommu_type1 vfio kvm irqbypass i915 nvme e1000e igb nvme_core crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic serio_raw ghash_clmulni_intel sha512_ssse3 dca drm_buddy intel_gtt video wmi drm_display_helper ttm
CR2: 0000000000000150
---[ end trace 0000000000000000 ]---

Cc: Wang Zhi <zhi.a.wang@intel.com>
Cc: He Yu <yu.he@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Tested-by: NYu He <yu.he@intel.com>
Fixes: bc7b0be3 ("drm/i915/gvt: Add basic debugfs infrastructure")
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-2-zhenyuw@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4b850d1 upstream.

When gvt debug fs is destroyed, need to have a sane check if drm
minor's debugfs root is still available or not, otherwise in case like
device remove through unbinding, drm minor's debugfs directory has
already been removed, then intel_gvt_debugfs_clean() would act upon
dangling pointer like below oops.

i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2
i915 0000:00:02.0: MDEV: Registered
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G          I        6.1.0-rc8+ #15
Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020
RIP: 0010:down_write+0x1f/0x90
Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01
RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000
RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8
RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0
FS:  00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0
Call Trace:
 <TASK>
 simple_recursive_removal+0x9f/0x2a0
 ? start_creating.part.0+0x120/0x120
 ? _raw_spin_lock+0x13/0x40
 debugfs_remove+0x40/0x60
 intel_gvt_debugfs_clean+0x15/0x30 [kvmgt]
 intel_gvt_clean_device+0x49/0xe0 [kvmgt]
 intel_gvt_driver_remove+0x2f/0xb0
 i915_driver_remove+0xa4/0xf0
 i915_pci_remove+0x1a/0x30
 pci_device_remove+0x33/0xa0
 device_release_driver_internal+0x1b2/0x230
 unbind_store+0xe0/0x110
 kernfs_fop_write_iter+0x11b/0x1f0
 vfs_write+0x203/0x3d0
 ksys_write+0x63/0xe0
 do_syscall_64+0x37/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6947cb5190
Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190
RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001
RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001
R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0
 </TASK>
Modules linked in: kvmgt
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]---

Cc: Wang, Zhi <zhi.a.wang@intel.com>
Cc: He, Yu <yu.he@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Fixes: bc7b0be3 ("drm/i915/gvt: Add basic debugfs infrastructure")
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-1-zhenyuw@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf97eb7e upstream.

This patch fixes the following kernel warning seen during
driver load by correctly initializing the p2plink attr before
creating the sysfs file:

[  +0.002865] ------------[ cut here ]------------
[  +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called.
[  +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0
[  +0.001361] Call Trace:
[  +0.001234]  <TASK>
[  +0.001067]  kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu]
[  +0.003147]  kfd_topology_update_sysfs+0x3d/0x750 [amdgpu]
[  +0.002890]  kfd_topology_add_device+0xbd7/0xc70 [amdgpu]
[  +0.002844]  ? lock_release+0x13c/0x2e0
[  +0.001936]  ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu]
[  +0.003313]  ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu]
[  +0.002703]  kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu]
[  +0.002930]  amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu]
[  +0.002944]  amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu]
[  +0.002970]  ? pci_bus_read_config_word+0x43/0x80
[  +0.002380]  amdgpu_driver_load_kms+0x15/0x100 [amdgpu]
[  +0.002744]  amdgpu_pci_probe+0x147/0x370 [amdgpu]
[  +0.002522]  local_pci_probe+0x40/0x80
[  +0.001896]  work_for_cpu_fn+0x10/0x20
[  +0.001892]  process_one_work+0x26e/0x5a0
[  +0.002029]  worker_thread+0x1fd/0x3e0
[  +0.001890]  ? process_one_work+0x5a0/0x5a0
[  +0.002115]  kthread+0xea/0x110
[  +0.001618]  ? kthread_complete_and_exit+0x20/0x20
[  +0.002422]  ret_from_fork+0x1f/0x30
[  +0.001808]  </TASK>
[  +0.001103] irq event stamp: 59837
[  +0.001718] hardirqs last  enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60
[  +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60
[  +0.004414] softirqs last  enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004203] ---[ end trace 0000000000000000 ]---

Fixes: 0f28cca8 ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: NMukul Joshi <mukul.joshi@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e699e34 upstream.

Add the missing declaration of struct drm_atomic_state to fix the
compile error below:

error: 'struct drm_atomic_state' declared inside parameter
list will not be visible outside of this definition or declaration [-Werror]
Signed-off-by: NMa Jun <majun@amd.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 8401bd36 ("drm/plane-helper: Add a drm_plane_helper_atomic_check() helper")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://patchwork.freedesktop.org/patch/msgid/20221216030526.1335609-1-majun@amd.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a12187d upstream.

If memory has been found early_init_dt_scan_memory now returns 1. If
it hasn't found any memory it will return 0, allowing other memory
setup mechanisms to carry on.

Previously early_init_dt_scan_memory always returned 0 without
distinguishing between any kind of memory setup being done or not. Any
code path after the early_init_dt_scan memory call in the ramips
plat_mem_setup code wouldn't be executed anymore. Making
early_init_dt_scan_memory the only way to initialize the memory.

Some boards, including my mt7621 based Cudy X6 board, depend on memory
initialization being done via the soc_info.mem_detect function
pointer. Those wouldn't be able to obtain memory and panic the kernel
during early bootup with the message "early_init_dt_alloc_memory_arch:
Failed to allocate 12416 bytes align=0x40".

Fixes: 1f012283 ("of/fdt: Rework early_init_dt_scan_memory() to call directly")
Cc: stable@vger.kernel.org
Signed-off-by: NAndreas Rammhold <andreas@rammhold.de>
Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.deSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b2d473a6 upstream.

In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):

---+-+-----------+-----------+--
100 0 rs1[4:0]!=0       00000 10 : c.jr
100 1 rs1[4:0]!=0       00000 10 : c.jalr
100 0  rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1  rd[4:0]!=0 rs2[4:0]!=0 10 : c.add

The following logic is used to decode c.jr and c.jalr:

  insn & 0xf007 == 0x8002 => instruction is an c.jr
  insn & 0xf007 == 0x9002 => instruction is an c.jalr

When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.

Correct the decoding by changing the mask from 0xf007 to 0xf07f.

Fixes: c22b0bcb ("riscv: Add kprobes supported")
Signed-off-by: NBjörn Töpel <bjorn@rivosinc.com>
Reviewed-by: NConor Dooley <conor.dooley@microchip.com>
Reviewed-by: NGuo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230102160748.1307289-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NPalmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9b916ae upstream.

If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.

fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Reviewed-by: NPalmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: NPalmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b878d3ba upstream.

Commit 473be511 ("thermal: int340x: processor_thermal: Add RFIM
driver")' added rfi_restriction_data_rate_base string, mmio details and
documentation, but missed adding attribute to sysfs.

Add missing sysfs attribute.

Fixes: 473be511 ("thermal: int340x: processor_thermal: Add RFIM driver")
Cc: 5.11+ <stable@vger.kernel.org> # v5.11+
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e794070a upstream.

While testing in vIOMMU, sometimes Guest will unmap very large memory,
which will cause the crash. To fix this, add a new function
vhost_vdpa_general_unmap(). This function will only unmap the memory
that saved in iotlb.

Call Trace:
[  647.820144] ------------[ cut here ]------------
[  647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174!
[  647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62
[  647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4
[  647.824365] RIP: 0010:domain_unmap+0x48/0x110
[  647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59
[  647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202
[  647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b
[  647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540
[  647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003
[  647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff
[  647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000
[  647.834782] FS:  00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000
[  647.836004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0
[  647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  647.840666] Call Trace:
[  647.841437]  <TASK>
[  647.842107]  intel_iommu_unmap_pages+0x93/0x140
[  647.843112]  __iommu_unmap+0x91/0x1b0
[  647.844003]  iommu_unmap+0x6a/0x95
[  647.844885]  vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa]
[  647.845985]  vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa]
[  647.847235]  ? _raw_spin_unlock+0x15/0x30
[  647.848181]  ? _copy_from_iter+0x8c/0x580
[  647.849137]  vhost_chr_write_iter+0xb3/0x430 [vhost]
[  647.850126]  vfs_write+0x1e4/0x3a0
[  647.850897]  ksys_write+0x53/0xd0
[  647.851688]  do_syscall_64+0x3a/0x90
[  647.852508]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  647.853457] RIP: 0033:0x7f7734ef9f4f
[  647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8
[  647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[  647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f
[  647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010
[  647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000
[  647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010
[  647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000
[  647.864692]  </TASK>
[  647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v]
[  647.874688] ---[ end trace 0000000000000000 ]---

Cc: stable@vger.kernel.org
Fixes: 4c8cf318 ("vhost: introduce vDPA-based backend")
Signed-off-by: NCindy Lu <lulu@redhat.com>
Message-Id: <20221219073331.556140-1-lulu@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1382999a upstream.

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c64 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: NVlastimil Babka <vbabka@suse.cz>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NLuigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 12521a5d upstream.

Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.

Cc: stable@vger.kernel.org
Fixes: 22833966 ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ffa13ff upstream.

Unlike normal tw, nothing prevents deferred tw to be executed right
after an tw item added to ->work_llist in io_req_local_work_add(). For
instance, the waiting task may get waken up by CQ posting or a normal
tw. Thus we need to pin the ring for the rest of io_req_local_work_add()

Cc: stable@vger.kernel.org
Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a79362b9c10b8523ef70b061d96523650a23344.1672795998.git.asml.silence@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9cea62b2 upstream.

If we split a bio marked with REQ_NOWAIT, then we can trigger spurious
EAGAIN if constituent parts of that split bio end up failing request
allocations. Parts will complete just fine, but just a single failure
in one of the chained bios will yield an EAGAIN final result for the
parent bio.

Return EAGAIN early if we end up needing to split such a bio, which
allows for saner recovery handling.

Cc: stable@vger.kernel.org # 5.15+
Link: https://github.com/axboe/liburing/issues/766Reported-by: NMichael Kelley <mikelley@microsoft.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9dba91b upstream.

It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.

Update the define with the real world value.
Tested-by: NRonald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181 ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: NChristian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9807ae69 upstream.

The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.

As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...

Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)

This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.

In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.

To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: NRonald Wahl <ronald.wahl@raritan.com>
Tested-by: NRonald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223 ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: NChristian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 03cb9e6d upstream.

This reverts commit 2481d206.

The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.

What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.

Revert the change in favor of a better and correct implementation.
Reported-by: NRonald Wahl <ronald.wahl@raritan.com>
Signed-off-by: NChristian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6fe6ece3 upstream.

This reverts commit de05abe6.

The bug referenced below was bisected to this commit. There has been no
activity toward fixing it in 3 months, so let's revert for now.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ed1d9ae upstream.

In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.

At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:

  insmod livepatch-sample.ko    # samples/livepatch/livepatch-sample.c
  bpftrace -e 'kretfunc:cmdline_proc_show {}'

BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G            E K    6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS:  00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
 bpf_trampoline_update+0x25a/0x6b0
 __bpf_trampoline_link_prog+0x101/0x240
 bpf_trampoline_link_prog+0x2d/0x50
 bpf_tracing_prog_attach+0x24c/0x530
 bpf_raw_tp_link_attach+0x73/0x1d0
 __sys_bpf+0x100e/0x2570
 __x64_sys_bpf+0x1c/0x30
 do_syscall_64+0x5b/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw.

Cc: stable@vger.kernel.org
Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: NChuang Wang <nashuiliang@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NSong Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221224133146.780578-1-nashuiliang@gmail.comSigned-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f685dd7a upstream.

Commit 62d89a7d ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:

     [    9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
     [    9.444502] matroxfb: cannot determine memory size
     [    9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1

So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.

While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.

Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.

Fixes: 62d89a7d ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cad85337 upstream.

If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.

That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.

If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.

Cc: Steve Dickson <steved@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777Reported-by: NJianHong Yin <yin-jianhong@163.com>
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a664ec91 upstream.

We missed the window between the TIF flag update and the next reschedule.
Signed-off-by: NRodrigo Branco <bsdaemon@google.com>
Reviewed-by: NBorislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d00dd2f2 upstream.

After

  b3e34a47 ("x86/kexec: fix memory leak of elf header buffer"),

freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.

Drop the superfluous vfree() call at the error path of
crash_load_segments().

Fixes: b3e34a47 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NBorislav Petkov (AMD) <bp@alien8.de>
Acked-by: NBaoquan He <bhe@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2aa2a5ea ]

If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.

If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.
Co-developed-by: NArchana Patni <archana.patni@intel.com>
Signed-off-by: NArchana Patni <archana.patni@intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 831ed60c ]

To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well.  Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set.  For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 61f37154 ]

Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 93ef8305 ]

When it fails to allocate fragment, it does not free and return error.
And check the pointer inappropriately.

Fixed merge conflicts with
commit 61888776 ("kunit: update NULL vs IS_ERR() tests")
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NYoungJun.park <her0gyugyu@gmail.com>
Reviewed-by: NDavid Gow <davidgow@google.com>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 34319084 ]

We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>