On failure, sys_execve() does not clobber EXTRA_REGS, so we can
just return to userpsace without saving/restoring them.

On success, ELF_PLAT_INIT() in sys_execve() clears all these
registers.

On other executable formats:

  - binfmt_flat.c has similar FLAT_PLAT_INIT, but x86 (and everyone
    else except sh) doesn't define it.

  - binfmt_elf_fdpic.c has ELF_FDPIC_PLAT_INIT, but x86 (and most
    others) doesn't define it.

  - There are no such hooks in binfmt_aout.c et al. We inherit
    EXTRA_REGS from the prior executable.

This inconsistency was not intended.

This change removes SAVE/RESTORE_EXTRA_REGS in stub_execve,
removes register clearing in ELF_PLAT_INIT(),
and instead simply clears them on success in stub_execve.

Run-tested.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1428173719-7637-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 'pax' argument is unnecesary.  Instead, store the RAX value
directly in regs.

This pattern goes all the way back to 2.1.106pre1, when restore_sigcontext()
was changed to return an error code instead of EAX directly:

  https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/arch/i386/kernel/signal.c?id=9a8f8b7ca3f319bd668298d447bdf32730e51174

In 2007 sigaltstack syscall support was added, where the return
value of restore_sigcontext() was changed to carry the memory-copying
failure code.

But instead of putting 'ax' into regs->ax directly, it was carried
in via a pointer and then returned, where the generic syscall return
code copied it to regs->ax.

So there was never any deeper reason for this suboptimal pattern, it
was simply never noticed after being introduced.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1428152303-17154-1-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Quentin caught a corner case with the generation of instruction
padding in the ALTERNATIVE_2 macro: if len(orig_insn) <
len(alt1) < len(alt2), then not enough padding gets added and
that is not good(tm) as we could overwrite the beginning of the
next instruction.

Luckily, at the time of this writing, we don't have
ALTERNATIVE_2() invocations which have that problem and even if
we did, a simple fix would be to prepend the instructions with
enough prefixes so that that corner case doesn't happen.

However, best it would be if we fixed it properly. See below for
a simple, abstracted example of what we're doing.

So what we ended up doing is, we compute the

	max(len(alt1), len(alt2)) - len(orig_insn)

and feed that value to the .skip gas directive. The max() cannot
have conditionals due to gas limitations, thus the fancy integer
math.

With this patch, all ALTERNATIVE_2 sites get padded correctly;
generating obscure test cases pass too:

  #define alt_max_short(a, b)    ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))

  #define gen_skip(orig, alt1, alt2, marker)	\
  	.skip -((alt_max_short(alt1, alt2) - (orig)) > 0) * \
  		(alt_max_short(alt1, alt2) - (orig)),marker

  	.pushsection .text, "ax"
  .globl main
  main:
  	gen_skip(1, 2, 4, 0x09)
  	gen_skip(4, 1, 2, 0x10)
  	...
  	.popsection

Thanks to Quentin for catching it and double-checking the fix!
Reported-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150404133443.GE21152@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>

... instead of a naked number, for better readability.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1428054130-25847-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  e2b32e67 ("x86, kaslr: randomize module base load address")

made module base address randomization unconditional and didn't regard
disabled KKASLR due to CONFIG_HIBERNATION and command line option
"nokaslr". For more info see (now reverted) commit:

  f47233c2 ("x86/mm/ASLR: Propagate base load address calculation")

In order to propagate KASLR status to kernel proper, we need a single bit
in boot_params.hdr.loadflags and we've chosen bit 1 thus leaving the
top-down allocated bits for bits supposed to be used by the bootloader.

Originally-From: Jiri Kosina <jkosina@suse.cz>
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  4214a16b ("x86/asm/entry/64/compat: Use SYSRETL to return from compat mode SYSENTER")

removed the last user of ENABLE_INTERRUPTS_SYSEXIT32. Kill the
macro now too.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1428049714-829-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

We write a stack pointer to MSR_IA32_SYSENTER_ESP exactly once,
and we unnecessarily cache the value in tss.sp1.  We never
read the cached value.

Remove all of the caching.  It serves no purpose.
Suggested-by: NDenys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/05a0163eb33ef5208363f0015496855da7cebadd.1428002830.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add support for the new CLWB (cache line write back)
instruction.  This instruction was announced in the document
"Intel Architecture Instruction Set Extensions Programming
Reference" with reference number 319433-022.

  https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf

The CLWB instruction is used to write back the contents of
dirtied cache lines to memory without evicting the cache lines
from the processor's cache hierarchy.  This should be used in
favor of clflushopt or clflush in cases where you require the
cache line to be written to memory but plan to access the data
again in the near future.

One of the main use cases for this is with persistent memory
where CLWB can be used with PCOMMIT to ensure that data has been
accepted to memory and is durable on the DIMM.

This function shows how to properly use CLWB/CLFLUSHOPT/CLFLUSH
and PCOMMIT with appropriate fencing:

void flush_and_commit_buffer(void *vaddr, unsigned int size)
{
	void *vend = vaddr + size - 1;

	for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size)
		clwb(vaddr);

	/* Flush any possible final partial cacheline */
	clwb(vend);

	/*
	 * Use SFENCE to order CLWB/CLFLUSHOPT/CLFLUSH cache flushes.
	 * (MFENCE via mb() also works)
	 */
	wmb();

	/* PCOMMIT and the required SFENCE for ordering */
	pcommit_sfence();
}

After this function completes the data pointed to by vaddr is
has been accepted to memory and will be durable if the vaddr
points to persistent memory.

Regarding the details of how the alternatives assembly is set
up, we need one additional byte at the beginning of the CLFLUSH
so that we can flip it into a CLFLUSHOPT by changing that byte
into a 0x66 prefix.  Two options are to either insert a 1 byte
ASM_NOP1, or to add a 1 byte NOP_DS_PREFIX.  Both have no
functional effect with the plain CLFLUSH, but I've been told
that executing a CLFLUSH + prefix should be faster than
executing a CLFLUSH + NOP.

We had to hard code the assembly for CLWB because, lacking the
ability to assemble the CLWB instruction itself, the next
closest thing is to have an xsaveopt instruction with a 0x66
prefix.  Unfortunately XSAVEOPT itself is also relatively new,
and isn't included by all the GCC versions that the kernel needs
to support.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1422377631-8986-3-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some of x86 bare-metal and Xen CPU initialization code is common
between the two and therefore can be factored out to avoid code
duplication.

As a side effect, doing so will also extend the fix provided by
commit a7fcf28d ("x86/asm/entry: Replace this_cpu_sp0() with
current_top_of_stack() to x86_32") to 32-bit Xen PV guests.
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: konrad.wilk@oracle.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1427897534-5086-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

user_mode_ignore_vm86() can be used instead of user_mode(), in
places where we have already done a v8086_mode() security
check of ptregs.

But doing this check in the wrong place would be a bug that
could result in security problems, and also the naming still
isn't very clear.

Furthermore, it only affects 32-bit kernels, while most
development happens on 64-bit kernels.

If we replace them with user_mode() checks then the cost is only
a very minor increase in various slowpaths:

   text             data   bss     dec              hex    filename
   10573391         703562 1753042 13029995         c6d26b vmlinux.o.before
   10573423         703562 1753042 13030027         c6d28b vmlinux.o.after

So lets get rid of this distinction once and for all.
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150329090233.GA1963@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Internally, lockdep_sys_exit_thunk saves callee-clobbered
registers, and calls a C function, lockdep_sys_exit. Thus,
callee-preserved registers won't be mangled, there is no need to
save them.

Patch was run-tested.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-4-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is no need to have an extra level of macro indirection
here.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-3-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This change simply moves defines around (even if it's not
obvious in a patch form). Nothing is changed.

This is a preparation for folding ARCH_LOCKDEP_SYS_EXIT defines
into their users.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

 - extend/clarify explanations where necessary

 - move comments from macro values to before the macro, to
   make them more consistent, and to reduce preprocessor overhead

 - sort GDT index and selector values likewise by number

 - use consistent, modern kernel coding style across the file

 - capitalize consistently

 - use consistent vertical spacing

 - remove the unused get_limit() method (noticed by Andy Lutomirski)

No change in code (verified with objdump -d):

 64-bit defconfig+kvmconfig:

   815a129bc1f80de6445c1d8ca5b97cad  vmlinux.o.before.asm
   815a129bc1f80de6445c1d8ca5b97cad  vmlinux.o.after.asm

 32-bit defconfig+kvmconfig:

   e659ef045159ddf41a0771b33a34aae5  vmlinux.o.before.asm
   e659ef045159ddf41a0771b33a34aae5  vmlinux.o.after.asm
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The THREAD_INFO() macro has a somewhat confusingly generic name,
defined in a generic .h C header file. It also does not make it
clear that it constructs a memory operand for use in assembly
code.

Rename it to ASM_THREAD_INFO() to make it all glaringly
obvious on first glance.
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/20150324184442.GC14760@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before:

   TI_sysenter_return+THREAD_INFO(%rsp,3*8),%r10d

After:

   movl    THREAD_INFO(TI_sysenter_return, %rsp, 3*8), %r10d

to turn it into a clear thread_info accessor.

No code changed:

 md5:
   fb4cb2b3ce05d89940ca304efc8ff183  ia32entry.o.before.asm
   fb4cb2b3ce05d89940ca304efc8ff183  ia32entry.o.after.asm

   e39f2958a5d1300158e276e4f7663263  entry_64.o.before.asm
   e39f2958a5d1300158e276e4f7663263  entry_64.o.after.asm
Acked-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/20150324184411.GB14760@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Explain the background, and add a real example.
Acked-by: NDenys Vlasenko <dvlasenk@redhat.com>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/20150324184311.GA14760@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This file just defines a number of constants, and a few macros
and inline functions. It is particularly badly written.

For example, it is not trivial to see how descriptors are
numbered (you'd expect that should be easy, right?).

This change deobfuscates it via the following changes:

Group all GDT_ENTRY_foo together (move intervening stuff away).

Number them explicitly: use a number, not PREV_DEFINE+1, +2, +3:
I want to immediately see that GDT_ENTRY_PNPBIOS_CS32 is 18.
Seeing (GDT_ENTRY_KERNEL_BASE+6) instead is not useful.

The above change allows to remove GDT_ENTRY_KERNEL_BASE
and GDT_ENTRY_PNPBIOS_BASE, which weren't used anywhere else.

After a group of GDT_ENTRY_foo, define all selector values.

Remove or improve some comments. In particular:
Comment deleted as stating the obvious:
    /*
     * The GDT has 32 entries
     */
    #define GDT_ENTRIES 32

"The segment offset needs to contain a RPL. Grr. -AK"
    changed to
"Selectors need to also have a correct RPL (+3 thingy)"

"GDT layout to get 64bit syscall right (sysret hardcodes gdt
offsets)" expanded into a description *how exactly* sysret
hardcodes them.

Patch was tested to compile and not change vmlinux.o
on 32-bit and 64-bit builds (verified with objdump).
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

PER_CPU_VAR(kernel_stack) was set up in a way where it points
five stack slots below the top of stack.

Presumably, it was done to avoid one "sub $5*8,%rsp"
in syscall/sysenter code paths, where iret frame needs to be
created by hand.

Ironically, none of them benefits from this optimization,
since all of them need to allocate additional data on stack
(struct pt_regs), so they still have to perform subtraction.

This patch eliminates KERNEL_STACK_OFFSET.

PER_CPU_VAR(kernel_stack) now points directly to top of stack.
pt_regs allocations are adjusted to allocate iret frame as well.
Hopefully we can merge it later with 32-bit specific
PER_CPU_VAR(cpu_current_top_of_stack) variable...

Net result in generated code is that constants in several insns
are changed.

This change is necessary for changing struct pt_regs creation
in SYSCALL64 code path from MOV to PUSH instructions.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This changes the THREAD_INFO() definition and all its callsites
so that they do not count stack position from
(top of stack - KERNEL_STACK_OFFSET), but from top of stack.

Semi-mysterious expressions THREAD_INFO(%rsp,RIP) - "why RIP??"
are now replaced by more logical THREAD_INFO(%rsp,SIZEOF_PTREGS)
- "calculate thread_info's address using information that
rsp is SIZEOF_PTREGS bytes below top of stack".

While at it, replace "(off)-THREAD_SIZE(reg)" with equivalent
"((off)-THREAD_SIZE)(reg)". The form without parentheses
falsely looks like we invoke THREAD_SIZE() macro.

Improve comment atop THREAD_INFO macro definition.

This patch does not change generated code (verified by objdump).
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It has no callers anymore.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a594afd6a0bddb1311bd7c92a15201c87fbb8681.1426728647.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

user_mode() is now identical to user_mode_vm().  Subsequent patches
will change all callers of user_mode_vm() to user_mode() and then
delete user_mode_vm().
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0dd03eacb5f0a2b5ba0240de25347a31b493c289.1426728647.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

user_mode() is dangerous and user_mode_vm() has a confusing name.

Add user_mode_ignore_vm86() (equivalent to current user_mode()).
We'll change the small number of legitimate users of user_mode()
to user_mode_ignore_vm86().

Inspired by grsec, although this works rather differently.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/202c56ca63823c338af8e2e54948dbe222da6343.1426728647.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Both the execve() and sigreturn() family of syscalls have the
ability to change registers in ways that may not be compatabile
with the syscall path they were called from.

In particular, SYSRET and SYSEXIT can't handle non-default %cs and %ss,
and some bits in eflags.

These syscalls have stubs that are hardcoded to jump to the IRET path,
and not return to the original syscall path.

The following commit:

   76f5df43 ("Always allocate a complete "struct pt_regs" on the kernel stack")

recently changed this for some 32-bit compat syscalls, but introduced a bug where
execve from a 32-bit program to a 64-bit program would fail because it still returned
via SYSRETL. This caused Wine to fail when built for both 32-bit and 64-bit.

This patch sets TIF_NOTIFY_RESUME for execve() and sigreturn() so
that the IRET path is always taken on exit to userspace.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1426978461-32089-1-git-send-email-brgerst@gmail.com
[ Improved the changelog and comments. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Commit b4b55cda (Refine the way to release PCI IRQ resources)
introduced a regression in the PCI IRQ resource management by causing
the IRQ resource of a device, established when pci_enabled_device()
is called on a fully disabled device, to be released when the driver
is unbound from the device, regardless of the enable_cnt.

This leads to the situation that an ill-behaved driver can now make a
device unusable to subsequent drivers by an imbalance in their use of
pci_enable/disable_device().  That is a serious problem for secondary
drivers like vfio-pci, which are innocent of the transgressions of
the previous driver.

Since the solution of this problem is not immediate and requires
further discussion, revert commit b4b55cda and the issue it was
supposed to address (a bug related to xen-pciback) will be taken
care of in a different way going forward.
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Nothing uses thread_struct::usersp anymore, so remove it.

Originally-from: Denys Vlasenko <dvlasenk@redhat.com>
Tested-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove all manipulations of PER_CPU(old_rsp) in C code:

 - it is not used on SYSRET return anymore, and system entries
   are atomic, so updating it from the fork and context switch
   paths is pointless.

 - Tweak a few related comments as well: we no longer have a
   "partial stack frame" on entry, ever.

Based on (split out of) patch from Denys Vlasenko.

Originally-from: Denys Vlasenko <dvlasenk@redhat.com>
Tested-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426599779-8010-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before the patch, the 'tss_struct::stack' field was not referenced anywhere.

It was used only to set SYSENTER's stack to point after the last byte
of tss_struct, thus the trailing field, stack[64], was used.

But grep would not know it. You can comment it out, compile,
and kernel will even run until an unlucky NMI corrupts
io_bitmap[] (which is also not easily detectable).

This patch changes code so that the purpose and usage of this
field is not mysterious anymore, and can be easily grepped for.

This does change generated code, for a subtle reason:
since tss_struct is ____cacheline_aligned, there happens to be
5 longs of padding at the end. Old code was using the padding
too; new code will strictly use it only for SYSENTER_stack[].
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425912738-559-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before this change, task_pt_regs() was using KSTK_TOP(),
and it was the only use of that macro. In turn, KSTK_TOP used
THREAD_SIZE_LONGS, and it was the only use of that macro too.

Fold these macros into task_pt_regs(). Tweak comment
about "- 8" - we now use a symbolic constant, not literal 8.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426255743-5394-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This has confused me for a while.  Now that I figured it out, document it.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b7efc1b7364039824776f68e9ddee9ec1500e894.1426009661.git.luto@amacapital.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

x86_32 and x86_64 need slightly different thread_struct::sp0 values, and
x86_32's was incorrect for init.

This never mattered -- the init thread never runs user code, so we never
used thread_struct::sp0 for anything.

Fix it and mostly unify them.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1b810c1d2e797e27bb4a7708c426101161edd1f6.1426009661.git.luto@amacapital.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

x86_32, unlike x86_64, pads the top of the kernel stack, because the
hardware stack frame formats are variable in size.

Document this padding and give it a name.

This should make no change whatsoever to the compiled kernel
image. It also doesn't fix any of the current bugs in this area.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Acked-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/02bf2f54b8dcb76a62a142b6dfe07d4ef7fc582e.1426009661.git.luto@amacapital.net
[ Fixed small details, such as a missed magic constant in entry_32.S pointed out by Denys Vlasenko. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

As far as I can tell, these fields have been set to zero on save
and ignored on restore since Linux was imported into git.
Rename them '__pad1' and '__pad2' to avoid confusion.  This may
also allow us to recycle them some day.

This also adds a comment clarifying the history of those fields.

I'm intentionally avoiding calling either of them '__pad0': the
field formerly known as '__pad0' is now 'ss'.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/844f8490e938780c03355be4c9b69eb4c494bf4e.1426193719.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The comment in the signal code says that apps can save/restore
other segments on their own.  It's true that apps can *save* SS
on their own, but there's no way for apps to restore it: SYSCALL
effectively resets SS to __USER_DS, so any value that user code
tries to load into SS gets lost on entry to sigreturn.

This recycles two padding bytes in the segment selector area for SS.

While we're at it, we need a second change to make this useful.

If the signal we're delivering is caused by a bad SS value,
saving that value isn't enough.  We need to remove that bad
value from the regs before we try to deliver the signal.  Oddly,
the i386 code already got this right.

I suspect that 64-bit programs that try to run 16-bit code and
use signals will have a lot of trouble without this.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/405594361340a2ec32f8e2b115c142df0e180d8e.1426193719.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit:

  f47233c2 ("x86/mm/ASLR: Propagate base load address calculation")

The main reason for the revert is that the new boot flag does not work
at all currently, and in order to make this work, we need non-trivial
changes to the x86 boot code which we didn't manage to get done in
time for merging.

And even if we did, they would've been too risky so instead of
rushing things and break booting 4.1 on boxes left and right, we
will be very strict and conservative and will take our time with
this to fix and test it properly.
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150316100628.GD22995@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>

drop_fpu() does clear_used_math() and usually this is correct
because tsk == current.

However switch_fpu_finish()->restore_fpu_checking() is called before
__switch_to() updates the "current_task" variable. If it fails,
we will wrongly clear the PF_USED_MATH flag of the previous task.

So use clear_stopped_child_used_math() instead.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Prepare for the removal of 'usersp', by simplifying PER_CPU(old_rsp) usage:

  - use it only as temp storage

  - store the userspace stack pointer immediately in pt_regs->sp
    on syscall entry, instead of using it later, on syscall exit.

  - change C code to use pt_regs->sp only, instead of PER_CPU(old_rsp)
    and task->thread.usersp.

FIXUP/RESTORE_TOP_OF_STACK are simplified as well.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425926364-9526-4-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before this patch, R11 was saved in pt_regs->r11.

Which looks natural, but requires messy shuffling to/from iret
frame whenever ptrace or e.g. sys_iopl() wants to modify flags -
because that's how this register is used by SYSCALL/SYSRET.

This patch saves R11 in pt_regs->flags, and uses that value for
the SYSRET64 instruction. Shuffling is eliminated.

FIXUP/RESTORE_TOP_OF_STACK are simplified.

stub_iopl is no longer needed: pt_regs->flags needs no fixing up.

Testing shows that syscall fast path is ~54.3 ns before
and after the patch (on 2.7 GHz Sandy Bridge CPU).
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425926364-9526-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

I broke 32-bit kernels.  The implementation of sp0 was correct
as far as I can tell, but sp0 was much weirder on x86_32 than I
realized.  It has the following issues:

 - Init's sp0 is inconsistent with everything else's: non-init tasks
   are offset by 8 bytes.  (I have no idea why, and the comment is unhelpful.)

 - vm86 does crazy things to sp0.

Fix it up by replacing this_cpu_sp0() with
current_top_of_stack() and using a new percpu variable to track
the top of the stack on x86_32.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 75182b16 ("x86/asm/entry: Switch all C consumers of kernel_stack to this_cpu_sp0()")
Link: http://lkml.kernel.org/r/d09dbe270883433776e0cbee3c7079433349e96d.1425692936.git.luto@amacapital.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The INIT_TSS is unnecessary.  Just define the initial TSS where
'cpu_tss' is defined.

While we're at it, merge the 32-bit and 64-bit definitions.  The
only syntactic change is that 32-bit kernels were computing sp0
as long, but now they compute it as unsigned long.

Verified by objdump: the contents and relocations of
.data..percpu..shared_aligned are unchanged on 32-bit and 64-bit
kernels.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8fc39fa3f6c5d635e93afbdd1a0fe0678a6d7913.1425611534.git.luto@amacapital.netSigned-off-by: NIngo Molnar <mingo@kernel.org>