There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Init SDMA HW base configuration and enable idle INT for rn.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix compute ring test failure in sriov scenario.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

stolen memory should be fixed in visible region.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in a DRM_DEBUG_DRIVER debug message.
Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to add new asic cases.  This is a sw display
implementation, so just drop the error message so when
we add new asics, all we have to do is add the virtual
dce IP module.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 62a37553 ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver does not support these sensors yet and there is no point in
creating sysfs attributes which will always return an error.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for SOC15/vega10 the BACO reset & mode1 would introduce vram lost
in high end address range, current kmd's vram lost checking cannot
catch it since it only check very ahead visible frame buffer

v2:
cover NV as well
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

jpeg pg depends on vcn pg
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in_suspend flag should be set in amdgpu_device_suspend/resume in pairs,
instead of gfx10 ip suspend/resume function.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8),
firmware is sufficient to support gfxoff.
In commit 98f58ada, for picasso&raven2,
return directly and cause gfxoff disabled.

Fixes: 98f58ada ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible")
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since commit 04d5e276 ("drm/amdgpu: Merge amdkfd into amdgpu"),
drivers/gpu/drm/amd/amdkfd/Makefile does not contain any syntax that
is understood by the build system.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needs ATPX rather than _PR3 to really turn off the dGPU. This can save
~5W when dGPU is runtime-suspended.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After commit a9f54ce3 ("drm/amd/display: Refactoring VTEM"),
there is no caller in tree.
Reported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Correct the settings for auto mode and skip the unnecessary
settings for dcefclk and fclk.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement HW I2C enigne controller to be used by the RAS EEPROM
table manager. This is based on code from ATITOOLs.

v2:
Rename the file and all function prefixes to smu_v11_0_i2c

By Luben's observation always fill the TX fifo to full so
we don't have garbadge interpreted by the slave as valid data.

v3:
Remove preemption disable as the HW I2C controller will not
stop the clock on empty TX fifo and so it's not critical to
keep not empty queue.
Switch to fast mode 400 khz SCL clock for faster read and write.

v5:
Restore clock gating before releasing I2C bus and fix some
style comments.

v6:
squash in warning fix, fix includes (Alex)
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NLuben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
PPSMC_MSG_RequestI2CBus seems not to work and so to avoid conflict
over I2C bus and engine disable thermal control access to
force SMU stop using the I2C bus until the issue is reslolved.

Expose and call vega20_is_smc_ram_running to skip locking when SMU
FW is not yet loaded.

v3:
Remove the prevoius hack as the SMU found the bug.

v5: Typo fix
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v3: Merge CKSVII2C_IC regs into exsisting headers.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add RAS EEPROM table manager to eanble RAS errors to be stored
upon appearance and retrived on driver load.

v2: Fix some prints.

v3:
Fix checksum calculation.
Make table record and header structs packed to do correct byte value sum.
Fix record crossing EEPROM page boundry.

v4:
Fix byte sum val calculation for record - look at sizeof(record).
Fix some style comments.

v5: Add description to EEPROM_TABLE_RECORD_SIZE and syntax fixes.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NLuben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 4f8bc72f.

It turned out that a single reserved queue wouldn't be
sufficient for page fault handling.
Signed-off-by: NGang Ba <gaba@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If CONFIG_DRM_AMD_DC_DSC_SUPPORT is not set, build fails:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c: In function dcn20_hw_sequencer_construct:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:2099:28:
 error: dcn20_dsc_pg_control undeclared (first use in this function); did you mean dcn20_dpp_pg_control?
  dc->hwss.dsc_pg_control = dcn20_dsc_pg_control;
                            ^~~~~~~~~~~~~~~~~~~~
                            dcn20_dpp_pg_control

Use CONFIG_DRM_AMD_DC_DSC_SUPPORT to guard this.
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 8a31820b ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The navi10_message_map[] array has SMU_MSG_MAX_COUNT elements so the ">"
has to be changed to ">=" to prevent reading one element beyond the end
of the array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since reservation_object_wait_timeout_rcu is called with
interruptable set to false it's wrong to say
'or interrupted' in the error message.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface.  This has caused a problem where status
registers requiring HW to update have a 1 cycle delay, due to the
register update having to go through GRBM.

SW may operate on an incorrect value if they write a register and
immediately check the corresponding status register.

Registers requiring HW to clear or set fields may be delayed by 1 cycle.
For example,

1. write VM_INVALIDATE_ENG0_REQ mask = 5a
2. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. HW will reset VM_INVALIDATE_ENG0_ACK = 0 until invalidation is complete
3. write VM_INVALIDATE_ENG0_REQ mask = 5a
4. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. First read of VM_INVALIDATE_ENG0_ACK = 5a instead of 0
    b. Second read of VM_INVALIDATE_ENG0_ACK = 0 because
       the remote GRBM h/w register takes one extra cycle to be cleared
    c. In this case, SW will see a false ACK if they exit on first read

Affected registers (only GC variant)  |  Recommended Dummy Read
--------------------------------------+----------------------------
VM_INVALIDATE_ENG*_ACK                |  VM_INVALIDATE_ENG*_REQ
VM_L2_STATUS                          |  VM_L2_STATUS
VM_L2_PROTECTION_FAULT_STATUS         |  VM_L2_PROTECTION_FAULT_STATUS
VM_L2_PROTECTION_FAULT_ADDR_HI/LO32   |  VM_L2_PROTECTION_FAULT_ADDR_HI/LO32
VM_L2_IH_LOG_BUSY                     |  VM_L2_IH_LOG_BUSY
MC_VM_L2_PERFCOUNTER_HI/LO            |  MC_VM_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER_HI/LO              |  ATC_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER2_HI/LO             |  ATC_L2_PERFCOUNTER2_HI/LO
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NJack Xiao <Jack.Xiao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY] value of dchub_ref_clock is decided by dchubbub global timer
settings which is programmed by vbios command table disp_init.
for multi-GPU case, vbios is posted only for primary GPU. without
vbios posted for the secondary GPU, value of dchub_ref_clock is not
set properly. this value will affect dcn bandwidth calcuation and
cause underflow. user will see screen flicking during driver
installation for dual GPU case.

[HOW] dc init_hw always call vbios command table disp_init to
make sure dchubbub global timer is configured and enable.
Signed-off-by: Nhersen wu <hersenxs.wu@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The register LVTMA_PWRSEQ_CNTL is used to determine the power state of the
embedded display. Currently we do not actually read this register's values,
so during power down we think that this display is already off, so we skip
calling into VBIOS to actually turn it off.

[How]
 - add relevant fields to shift / mask initialization
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Previous workaround to prevent a vsync flip to be converted
to immediate flip is no longer needed, and is risky because
there are cases where it can result in infinite loop.

[how]
Remove wait loop (which is potentially infinite) before locking
pipe
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We should be using the ddc_num from res_caps. As the
pipe count != number of i2c resources.

[How]
Use ddc_num from res_cap instead of pipe count.
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Existing HW Features, HW Diags test requested that the
registers be exposed.

[How]
Add V_TOTAL_MID to existing DC structures.
Make sure values are passed down throughout DC
Add Register definition.
Program the additional registers
Add additional Logic for V_TOTAL_CONTROL.
Signed-off-by: NBayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Calculating DCFCLK DS time requires calculating
delivery time for luma/chroma, but this value is
not calculated in DMLv2, it was inadvertently
removed when porting DMLv2

[how]
Add the calculation back
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DRM provides drm_dp_mst_dump_topology, which prints
useful information about MST devices

Hook this up to a debugfs file named amdgpu_mst_topology
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
OS will reserve HW state in UEFI mode.
Driver init_hw reset to RGB which caused HDMI green in YCbCr mode.
read HW blank_color based on acc_mode.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A recent bug showed that logging would be useful in debugging
various gamma issues.

[How]
Add logging in dc.
Fix formatting for easier graphing.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why] HW rotation is not enabled. Calculations for cursor rotation
are wrong for the values passed to set_cursor_position.

[How] Swap Src rect and height and vertically mirror surface for
the correct surface rotation direction. Cursor position is rotated
according to angle. Offset calculations are tweaked for non-rotated
cursor hotspot and width/height.
Signed-off-by: NJaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need to have the ability to to tell us set degamma on the cursor.

[How]
Pass a flag down to register programming that tells us if the
current surface format needs cursor degamma.
Signed-off-by: NBayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>