noticed by Jay Fenlason
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NKristian Høgsberg <krh@redhat.com>

Replace a cast with a container_of().  As long as nobody reorders the
structure elements, they do the same thing, but container_of() is more
readable.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added complete_command_orb)
Acked-by: NKristian Høgsberg <krh@redhat.com>

The isochronous packet format is still not documented, but this
is a good first step.
Signed-off-by: NKristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (format, wording)

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

This affects of course only the "soft shutdown" case, e.g. "modprobe -r
firewire-sbp2", while it doesn't matter for hot unplug.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

This currently only affects one bridge in the hardwired blacklist.
I don't own one of those, hence haven't tested it.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

cleanup after "firewire: support S100B...S400B and link slower than PHY"
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

Use a speed probe to determine the speed over 1394b buses and of nodes
which report a link speed less than their PHY speed.

Log the effective maximum speed of newly created nodes in dmesg.

Also, read the config ROM (except bus info block) at the maximum speed
rather than S100.  This isn't a real optimization though because we
still only use quadlet read requests for the entire ROM.

The patch also adds support for S1600 and S3200, although such hardware
does not exist yet.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

Table-based gap count optimization cannot be used if 1394b repeater PHYs
are present.  But it does work with 1394b leaf nodes.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Also remove some errno printouts which will be shown by infrastructure
code anyway.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

cleanup after support of single-buffer requests was dropped
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Hoegsberg <krh@redhat.com>

Based on patch "the scheduled removal of RAW1394_REQ_ISO_{SEND,LISTEN}"
from Adrian Bunk, November 20 2006.

This patch also removes the underlying facilities in ohci1394 and
disables them in pcilynx.  That is, hpsb_host_driver.devctl() and
hpsb_host_driver.transmit_packet() are no longer used for iso reception
and transmission.

Since video1394 and dv1394 only work with ohci1394 and raw1394's rawiso
interface has never been implemented in pcilynx, pcilynx is now no
longer useful for isochronous applications.

raw1394 will still handle the request types but will complete the
requests with errors that indicate API version conflicts.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This is upwards compatible, except that integer values other than 0 or 1
are no longer accepted.  But values like "Y", "N", "no", "nnoooh!" work
now.

Also, improve a comment on the serialize_io parameter and make the
ORB_SET_EXCLUSIVE macro ultra-safe.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Association of a host device with a node on NUMA machines optimizes
allocations of skbs given from the networking stack to eth1394.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

After ieee1394 was converted away from class_device like the networking
subsystem was already in 2.6.21, eth1394's device may point to the
fw-host device as its parent again like in 2.6.20.

This affects userspace tools which examine the sysfs representation of
eth1394's device.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Remove the global nodemgr_serialize mutex which enclosed most of the
host thread event loop.  This allows for parallelism between several
host adapter cards.

Properly serialize the driver hooks .update(), .suspend(), .resume(),
and .remove() by means of device->sem.  These hooks can be called from
outside the host threads' contexts.

Get() and put() the device.driver when calling its hooks.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Here is a straightforward conversion to "struct device". The "struct
class_device" will be removed from the kernel.

It seems to work fine for me with and without CONFIG_SYSFS_DEPRECATED
set.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

I was told that only i386 aligns 64 bit integers at 4 bytes boundaries
while all other architectures (32 bit architectures with 64 bit
siblings) align it on 8 bytes boundaries.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Pointed out by Arnd Bergmann:  PPC32 aligns this at 64bit, IA32 packs
it.  A kernel-wide available __compat_u64 which is 4-byte aligned on
AMD64 and IA64 would be nicer though.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Add compat_ioctl.  Although all structures are more or less same,
raw1394_iso_packets got pointer inside, and raw1394_cycle_timer got unwanted
padding in the middle.  I did not add any translation for ioctls passing array
of integers around as integers seem to have same size (32 bits) on all
architectures supported by Linux.
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Acked-by: NDan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)

* write(fd, buf, 52) from 32bit app was returning 56.  Most of callers did not
  care, but some (arm registration) did, and anyway it looks bad if request for
  writing 52 bytes returns 56.  And returning sizeof anything in 'int' is not
  good as well.  So all functions now return '0' instead of
  sizeof(struct raw1394_request) on success, and write() itself provides correct
  return value (it just returns value it was asked to write on success as raw1394
  does not do any partial writes at all).

* Related to this was problem that write() could have returned 0 when kernel
  state would become corrupted and moved to different state than
  opened/initialized/connected.  Now it returns -EBADFD which seemed appropriate.
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Acked-by: NDan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)

read() always failed with -EFAULT.  This was happening due to
raw1394_compat_read copying data to wrong location - access_ok always
failed as 'r' is kernel address, not user.  Whole function just tried to
copy data from 'r' to 'r', which is not good.
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Acked-by: NDan Dennedy <dan@dennedy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)

to clarify who is supposed to set what
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

spotted by Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Woo-hoo. I'm sure somebody will report a "this doesn't compile, and
I have a new root exploit" five minutes after release, but it still
feels good ;)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  qd65xx: fix PIO mode selection
  sis5513: adding PCI-ID

Commit 1c710c89 added the utimensat()
system call, but didn't handle the case of checking for the writability
of the target right, when the target was a file descriptor, not a
filename.

We cannot use vfs_permission(MAY_WRITE) for that case, and need to
simply check whether the file descriptor is writable.  The oops from
using the wrong function was noticed and narrowed down by Markus
Trippelsdorf.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NAl Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a post-2.6.21 regression.

read_cache_page_async() has two invocations of mark_page_accessed() which will
launch pages right onto the active list.

Remove the first one, keeping the latter one.  This avoids marking unwanted
pages active (in the retry loop).
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PIO4 is a maximum PIO mode supported by a driver.  Using "255" as a max_mode
argument to ide_get_best_pio_mode() could result in wrong timings being used
by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Reviewed-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>

The SiS966 has one additional PCI-ID 1180.

If the chipset is using this PCI-ID, the primary channel is connected to the
first PATA-port. The secondary channel is connected to SATA-ports in IDE
emulation mode.  The legacy IO-ports are used.

The including of the PCI-ID into pata_sis is not sufficient, because the legacy
driver in drivers/ide is initialized before pata_sis.
Signed-off-by: NUwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The dependency of DLM on SYSFS got lost in
commit 6ed7257b resulting in the
following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n:

<--  snip  -->

...
  LD      .tmp_vmlinux1
fs/built-in.o: In function `dlm_lockspace_init':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys'
fs/built-in.o: In function `configfs_init':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys'
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The printk level in this printk is bogus, as the previous printk
didn't have a terminating \n resulting in ..

Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity

It also never printed a \n at all in the case where we didn't do
the quirk.

Change it to only make noise if it actually does something useful.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following 2.6.22 regression with CONFIG_KALLSYMS=n:

<--  snip  -->

...
  CC      arch/m32r/kernel/traps.o
In file included from /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/arch/m32r/kernel/traps.c:14:
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_name':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: 'ERANGE' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_attrs':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:71: error: 'ERANGE' undeclared (first use in this function)
make[2]: *** [arch/m32r/kernel/traps.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When cleaning up HIDP sessions, we currently close the ACL connection
before deregistering the input device. Closing the ACL connection
schedules a workqueue to remove the associated objects from sysfs, but
the input device still refers to them -- and if the workqueue happens to
run before the input device removal, the kernel will oops when trying to
look up PHYSDEVPATH for the removed input device.

Fix this by deregistering the input device before closing the
connections.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kmem_cache_open is static. EXPORT_SYMBOL was leftover from some earlier
time period where kmem_cache_open was usable outside of slub.

(Fixes powerpc build error)
Signed-off-by: NChrsitoph Lameter <clameter@sgi.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

davem kindly moved the list from osdl to vger.
Signed-of-by: Nmaximilian attems <max@stro.at>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines,
this has the reboot fixup do just that if such a board is detected.
Acked-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETPOLL]: Fixups for 'fix soft lockup when removing module'
  [NET]: net/core/netevent.c should #include <net/netevent.h>
  [NETFILTER]: nf_conntrack_h323: add checking of out-of-range on choices' index values
  [NET] skbuff: remove export of static symbol
  SCTP: Add scope_id validation for link-local binds
  SCTP: Check to make sure file is valid before setting timeout
  SCTP: Fix thinko in sctp_copy_laddrs()

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix scheduling latency issue on 24K, 34K and 74K cores
  [MIPS] Add macros to encode processor revisions.
  [MIPS] RM7000: Enable ICACHE_REFILLS_WORKAROUND_WAR.
  [MIPS] SMTC: Fix cut'n'paste bug in Kconfig.debug
  [MIPS] Change libgcc-style functions from lib-y to obj-y
  [MIPS] Fix timer/performance interrupt detection
  [MIPS] AP/SP: Avoid triggering the 34K E125 performance issue
  [MIPS] 64-bit TO_PHYS_MASK macro for RM9000 processors