- 12 9月, 2013 40 次提交
-
-
由 Jean Delvare 提交于
Add const to all DMI string pointers where this is possible. This fixes a checkpatch warning. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Fix all errors and trivial warnings reported by checkpatch for file drivers/firmware/dmi_scan.c. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
This comment predates the introduction of early_ioremap. Since then the missing calls to dmi_iounmap have been added by Ingo and Yinghai in commits 0d64484f ("x86: fix DMI ioremap leak") and 3212bff3 ("x86: left over fix for leak of early_ioremp in dmi_scan") . That was over 5 years ago so it is about time to drop this now misleading comment. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
ep_free() might iterate on a huge set of epitems and hold cpu too long. Add two cond_resched() in order to yield cpu to other tasks. This is safe as we only hold mutexes in this function. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
As discussed recently on the arm [1] and lm-sensors [2] lists, it is possible to use section markers on variables in a way which gcc doesn't understand (or at least not the way the developer intended): static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = { does NOT put exynos4_plls in the .initdata section. The __initdata marker can be virtually anywhere on the line, EXCEPT right after "struct". The preferred location is before the "=" sign if there is one, or before the trailing ";" otherwise. [1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149 [2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html So, update checkpatch to find these misuses and report an error when it's immediately after struct or union, and a warning when it's otherwise not immediately before the ; or =. A similar patch was suggested by Andi Kleen https://lkml.org/lkml/2013/8/5/648Signed-off-by: NJoe Perches <joe@perches.com> Suggested-by: NJean Delvare <khali@linux-fr.org> Tested-by: NGuenter Roeck <linux@roeck-us.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
A previous patch ("checkpatch: add --types option to report only specific message types") uses a perl syntax introduced in perl version 5.14. Use the backward compatible perl syntax instead. Signed-off-by: NJoe Perches <joe@perches.com> Reported-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
There are some cases where checkpatch can take a long time to complete. Reduce the likelihood of this long run-time by adding a new test for lines with and without comments and eliminating checks on lines with only comments. This reduces the number of "ctx_statement_block" calls, and also the number of tests of $stat, which is now undefined for these blank lines. One test in particular, the "check for switch/default statements without a break", could take an extremely long time to parse as it tries to skip interleaving comments within the ctx_statement_block/$stat and that could be done multiple times unnecessarily. A small test case taken from cfg80211.h before this patch would take 1000's of seconds to run, now it's just a couple seconds. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Previous attempt at fixing SPACING errors could make a hash of several defects. This patch should make --fix be a lot better at correcting these defects. Trim left and right sides of these defects appropriately instead of a somewhat random attempt at it. Trim left spaces from any following bit of the modified line when only a single space is required around an operator. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Phil Carmody <phil.carmody@partner.samsung.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
The tracing subsystem uses slightly odd #defines to set path/directory locations for include files. These #defines can cause false positives for the complex macro tests so add exclusions for these specific #defines (TRACE_SYSTEM, TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH). Signed-off-by: NJoe Perches <joe@perches.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Add a --types convenience option to show only specific message types. Combined with the --fix option, this can produce specific suggested formatting patches to files. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
checkpatch can generate a false positive when inserting a new kernel-doc block and function above an existing kernel-doc block. Fix it by checking that the context line is also a newly inserted line. Signed-off-by: NJoe Perches <joe@perches.com> Reported-by: NDarren Hart <dvhart@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Using the extern keyword on function prototypes is superfluous visual noise so suggest removing it. Using extern can cause unnecessary line wrapping at 80 columns and unnecessarily long multi-line function prototypes. Signed-off-by: NJoe Perches <joe@perches.com> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Emit a warning when a signature is used more than once. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
I got a bug report from a couple of users who said checkpatch.pl was broken for them. It was erroring out on fairly random lines most commonly with messages like: Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340. The bug reporter was running a version of perl 5.8 which was end-of-lifed in 2008: http://www.cpan.org/src/. Versions of perl this old are at _best_ quite untested. At worst, they are crusty and known to be completely broken. If folks have a system _that_ old, then we should have mercy on them and give them a half-decent error message rather than fail with nutty error messages. This patch enforces that checkpatch.pl is run with perl 5.10, which was end-of-lifed in 2009. The new --ignore-perl-version command-line switch will let folks override this if they want. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
$Lval is a test for complete name (ie: foo->bar.Baz[1]) If any of this is CamelCase, then the current test uses the entire $Lval. This isn't optimal because it can emit messages with foo->bar.Baz and bar.Baz when Baz is a variable specified in an include file. So instead, break the $Lval into words and check each word for CamelCase uses. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Suggest a few more single-line corrections. Remove DOS line endings Simplify removing trailing whitespace Remove global/static initializations to 0/NULL Convert pr_warning to pr_warn Add space after brace Convert binary constants to hex Remove whitespace after line continuation Use inline not __inline or __inline__ Use __printf and __scanf Use a single ; for statement terminations Convert __FUNCTION__ to __func__ Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Courbot 提交于
When decompressing into memory, the output buffer length is set to some arbitrarily high value (0x7fffffff) to indicate the output is, virtually, unlimited in size. The problem with this is that some platforms have their physical memory at high physical addresses (0x80000000 or more), and that the output buffer address and its "unlimited" length cannot be added without overflowing. An example of this can be found in inflate_fast(): /* next_out is the output buffer address */ out = strm->next_out - OFF; /* avail_out is the output buffer size. end will overflow if the output * address is >= 0x80000104 */ end = out + (strm->avail_out - 257); This has huge consequences on the performance of kernel decompression, since the following exit condition of inflate_fast() will be always true: } while (in < last && out < end); Indeed, "end" has overflowed and is now always lower than "out". As a result, inflate_fast() will return after processing one single byte of input data, and will thus need to be called an unreasonably high number of times. This probably went unnoticed because kernel decompression is fast enough even with this issue. Nonetheless, adjusting the output buffer length in such a way that the above pointer arithmetic never overflows results in a kernel decompression that is about 3 times faster on affected machines. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Tested-by: NJon Medhurst <tixy@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gu Zheng 提交于
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Emilio López 提交于
The documentation mentions a "name" parameter, which does not exist. This commit removes such mention from the function documentation. Signed-off-by: NEmilio López <emilio@elopez.com.ar> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
It's clearer to have patterns marked as directories. Change the directory patterns without terminating slashes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Daudt 提交于
Add ownership to maintainers file for the mach-bcm related files, including drivers that are used for the SoCs defined in mach-bcm. Signed-off-by: NChristian Daudt <csd@broadcom.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit c50cd357 ("net: gre: move GSO functions to gre_offload") renamed and separated the file into multiple files. Update the patterns. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit a0e63123 ("usb: phy: move all PHY drivers to drivers/usb/phy/") deleted the files, remove the file pattern. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit f3bc64d6 ("USB: EHCI: DT support for generic bus glue") removed the ehci-vt8500.c file, update the file pattern to include ehci-platform.c. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 6659a20a ("ARC: MAINTAINERS update for ARC") typoed the file pattern. Fix it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 45fcac1a ("mfd: Move ssbi driver into drivers/mfd") move the files, update the patterns. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit d7104bff ("[media] MAINTAINERS: add drivers/media/tuners/it913x*") used the incorrect file patterns. Fix it. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NAntti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit c937ca03 ("[media] MAINTAINERS: Add maintainer entry for si4713 FM transmitter driver") typoed the pattern, fix it. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NEduardo Valentin <edubezval@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 786baecf ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb") moved the files, update the pattern. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 77c5f5d2 ("ghes_edac: Register at EDAC core the BIOS report") typoed the file pattern. Fix it. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 09ec1d7e ("ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/") moved the files, remove the pattern. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 694e33a7 ("ARM: plat-nomadik: move MTU, kill plat-nomadik") moved the files, update the patterns. Signed-off-by: NJoe Perches <joe@perches.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit a7ed099f ("ARM: spear: move all files to mach-spear") moved all the files into a single directory, delete the now unnecessary duplicate sections and update the pattern. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 85fd6d63 ("ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/") moved the files, update the patterns. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 49815399 ("ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain") renamed the files, update the patterns. Identical to a patch earlier sent by Cesar Eduardo Barros. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 4bd5259e ("ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM") deleted the files, update the pattern. Identical to a patch earlier sent by Cesar Eduardo Barros. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit ca914350 ("ARM: EXYNOS: Remove unused board files") removed the files, remove the patterns too. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Tomasz Figa <t.figa@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
No functional changes, just comments. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Trivial. Remove the unnecessary "work = NULL" initialization and turn read_barrier_depends() into smp_read_barrier_depends() in task_work_cancel(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
As in commit f21afc25 ("smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu()"), we don't want to enable irqs if they are not already enabled. I don't know of any bugs currently caused by this unconditional local_irq_enable(), but I want to use this function in MIPS/OCTEON early boot (when we have early_boot_irqs_disabled). This also makes this function have similar semantics to on_each_cpu() which is good in itself. Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Christoph Lameter <cl@linux.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-