Feng reported an skb_under_panic BUG triggered by running
test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:

[   82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[   82.607380] Call Trace:
[   82.609389]  <TASK>
[   82.611136]  skb_push.cold.109+0x10/0x10
[   82.614289]  __gre6_xmit+0x41e/0x590
[   82.617169]  ip6gre_tunnel_xmit+0x344/0x3f0
[   82.620526]  dev_hard_start_xmit+0xf1/0x330
[   82.623882]  sch_direct_xmit+0xe4/0x250
[   82.626961]  __dev_queue_xmit+0x720/0xfe0
<...>
[   82.633431]  packet_sendmsg+0x96a/0x1cb0
[   82.636568]  sock_sendmsg+0x30/0x40
<...>

The following sequence of events caused the BUG:

1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is
   calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming
   tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for
   skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates
   "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and
   TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header
   room, triggering the BUG.

As sugguested by Cong, fix it by moving the call to skb_cow_head() after
the recalculation of tun_hlen.

Reproducer:

  OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o

  ip netns add at_ns0
  ip link add veth0 type veth peer name veth1
  ip link set veth0 netns at_ns0
  ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
  ip netns exec at_ns0 ip link set dev veth0 up
  ip link set dev veth1 up mtu 1500
  ip addr add dev veth1 172.16.1.200/24

  ip netns exec at_ns0 ip addr add ::11/96 dev veth0
  ip netns exec at_ns0 ip link set dev veth0 up
  ip addr add dev veth1 ::22/96
  ip link set dev veth1 up

  ip netns exec at_ns0 \
  	ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
  	local ::11 remote ::22

  ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24
  ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96
  ip netns exec at_ns0 ip link set dev ip6gretap00 up

  ip link add dev ip6gretap11 type ip6gretap external
  ip addr add dev ip6gretap11 10.1.1.200/24
  ip addr add dev ip6gretap11 fc80::200/24
  ip link set dev ip6gretap11 up

  tc qdisc add dev ip6gretap11 clsact
  tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel
  tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel

  ping6 -c 3 -w 10 -q ::11

Fixes: 6712abc1 ("ip6_gre: add ip6 gre and gretap collect_md mode")
Reported-by: NFeng Zhou <zhoufeng.zf@bytedance.com>
Co-developed-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NPeilin Ye <peilin.ye@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not update tunnel->tun_hlen in data plane code.  Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().
Co-developed-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NPeilin Ye <peilin.ye@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

On egress side, xfrm lookup is called from __gre6_xmit() with the
fl6_gre_key field not initialized leading to policies selectors check
failure. Consequently, gre packets are sent without encryption.

On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not
checked against xfrm policies. Like for egress side, fl6_gre_key should be
correctly set, this is now done in decode_session6().

Fixes: c12b395a ("gre: Support GRE over IPv6")
Cc: stable@vger.kernel.org
Signed-off-by: NGhalem Boudour <ghalem.boudour@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Use dev_addr_set() instead of writing to netdev->dev_addr
directly in ip tunnels drivers.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This reverts commit 9cf448c2.

This commit was added for equivalence with a similar fix to ip_gre.
That fix proved to have a bug. Upon closer inspection, ip6_gre is not
susceptible to the original bug.

So revert the unnecessary extra check.

In short, ipgre_xmit calls skb_pull to remove ipv4 headers previously
inserted by dev_hard_header. ip6gre_tunnel_xmit does not.

Link: https://lore.kernel.org/netdev/CA+FuTSe+vJgTVLc9SojGuN-f9YQ+xWLPKE_S4f=f+w+_P2hgUg@mail.gmail.com/#t
Fixes: 9cf448c2 ("ip6_gre: add validation for csum_start")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validate csum_start in gre_handle_offloads before we call _gre_xmit so
that we do not crash later when the csum_start value is used in the
lco_csum function call.

This patch deals with ipv6 code.

Fixes: Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common
GRE functions")
Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com
Signed-off-by: NShreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.

Move them over to the new .ndo_siocdevprivate operation.

Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.

Fallback tunnels do call their respective ndo_init()

This leads to various reports like :

unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2

Fixes: 48bb5697 ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334 ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]

Issue here is that:

- all dev_put() should be paired with a corresponding dev_hold(),
  and vice versa.

- A driver doing a dev_put() in its ndo_uninit() MUST also
  do a dev_hold() in its ndo_init(), only when ndo_init()
  is returning 0.

Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.

ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/

Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()

[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 8422 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 8422 Comm: syz-executor854 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900018befd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801ef19c40 RSI: ffffffff815c51f5 RDI: fffff52000317dec
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888018cf4568
R13: ffff888018cf4c00 R14: ffff8880228f2000 R15: ffffffff8d659b80
FS:  00000000014eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7bf2b3138 CR3: 0000000014933000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 dev_put include/linux/netdevice.h:4135 [inline]
 ip6gre_tunnel_uninit+0x3d7/0x440 net/ipv6/ip6_gre.c:420
 register_netdevice+0xadf/0x1500 net/core/dev.c:10308
 ip6gre_newlink_common.constprop.0+0x158/0x410 net/ipv6/ip6_gre.c:1984
 ip6gre_newlink+0x275/0x7a0 net/ipv6/ip6_gre.c:2017
 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46

Fixes: 919067cc ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were a few remaining tunnel drivers that didn't receive the prior
conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to
memory corrution (see ee576c47 ("net: icmp: pass zeroed opts from
icmp{,v6}_ndo_send before sending") for details), there's even more
imperative to have these all converted. So this commit goes through the
remaining cases that I could find and does a boring translation to the
ndo variety.

The Fixes: line below is the merge that originally added icmp{,v6}_
ndo_send and converted the first batch of icmp{,v6}_send users. The
rationale then for the change applies equally to this patch. It's just
that these drivers were left out of the initial conversion because these
network devices are hiding in net/ rather than in drivers/net/.

Cc: Florian Westphal <fw@strlen.de>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: 803381f9 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:

  skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:109!
  Call Trace:
  skb_push+0x10/0x10
  ip6gre_header+0x47/0x1b0
  neigh_connected_output+0xae/0xf0

ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.

Fixes: eb95f52f ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: NAntoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Replace ip_tunnel_get_stats64() with the new identical core function
dev_get_tstats64().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

similarly to what has been done with commit 9d149045 ("geneve: change
from tx_error to tx_dropped on missing metadata"), avoid reporting errors
to userspace in case the kernel doesn't find any tunnel information for a
skb that is going to be transmitted: an increase of tx_dropped is enough.

tested with the following script:

 # for t in ip6gre ip6gretap ip6erspan; do
 > ip link add dev gre6-test0 type $t external
 > ip address add dev gre6-test0 2001:db8::1/64
 > ip link set dev gre6-test0 up
 > sleep 30
 > ip -s -j link show dev gre6-test0 | jq \
 > '.[0].stats64.tx | {"errors": .errors, "dropped": .dropped}'
 > ip link del dev gre6-test0
 > done
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

KASAN report null-ptr-deref error when register_netdev() failed:

KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
 ip6gre_init_net+0x4ab/0x580
 ? ip6gre_tunnel_uninit+0x3f0/0x3f0
 ops_init+0xa8/0x3c0
 setup_net+0x2de/0x7e0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? ops_init+0x3c0/0x3c0
 ? kasan_unpoison_shadow+0x33/0x40
 ? __kasan_kmalloc.constprop.0+0xc2/0xd0
 copy_net_ns+0x27d/0x530
 create_new_namespaces+0x382/0xa30
 unshare_nsproxy_namespaces+0xa1/0x1d0
 ksys_unshare+0x39c/0x780
 ? walk_process_tree+0x2a0/0x2a0
 ? trace_hardirqs_on+0x4a/0x1b0
 ? _raw_spin_unlock_irq+0x1f/0x30
 ? syscall_trace_enter+0x1a7/0x330
 ? do_syscall_64+0x1c/0xa0
 __x64_sys_unshare+0x2d/0x40
 do_syscall_64+0x56/0xa0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.

Fixes: dafabb65 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.

Test commands:
    ip netns add A
    ip netns add B
    ip link add eth0 type veth peer name eth1
    ip link set eth0 netns A
    ip link set eth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set eth0 up
    ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \
	    remote fc:0::2
    ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1
    ip netns exec A ip link set ip6gre1 up
    ip netns exec A ip -6 a a fc:0::1/64 dev eth0
    ip netns exec A ip link set ip6gre0 up

    ip netns exec B ip link set lo up
    ip netns exec B ip link set eth1 up
    ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \
	    remote fc:0::1
    ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1
    ip netns exec B ip link set ip6gre1 up
    ip netns exec B ip -6 a a fc:0::2/64 dev eth1
    ip netns exec B ip link set ip6gre0 up
    ip netns exec A ping fc:100::2 -s 60000 &
    ip netns del B

Splat looks like:
[   73.087285][    C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.088361][    C1] Read of size 4 at addr ffff888040559218 by task ping/1429
[   73.089317][    C1]
[   73.089638][    C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602
[   73.090531][    C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   73.091725][    C1] Call Trace:
[   73.092160][    C1]  <IRQ>
[   73.092556][    C1]  dump_stack+0x96/0xdb
[   73.093122][    C1]  print_address_description.constprop.6+0x2cc/0x450
[   73.094016][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.094894][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.095767][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.096619][    C1]  kasan_report+0x154/0x190
[   73.097209][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.097989][    C1]  ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.098750][    C1]  ? gre_del_protocol+0x60/0x60 [gre]
[   73.099500][    C1]  gre_rcv+0x1c5/0x1450 [ip6_gre]
[   73.100199][    C1]  ? ip6gre_header+0xf00/0xf00 [ip6_gre]
[   73.100985][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.101830][    C1]  ? ip6_input_finish+0x5/0xf0
[   73.102483][    C1]  ip6_protocol_deliver_rcu+0xcbb/0x1510
[   73.103296][    C1]  ip6_input_finish+0x5b/0xf0
[   73.103920][    C1]  ip6_input+0xcd/0x2c0
[   73.104473][    C1]  ? ip6_input_finish+0xf0/0xf0
[   73.105115][    C1]  ? rcu_read_lock_held+0x90/0xa0
[   73.105783][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.106548][    C1]  ipv6_rcv+0x1f1/0x300
[ ... ]
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

net/ipv6/ip6_gre.c: In function ‘ip6gre_err’:
net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable]
  440 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’:
net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable]
  520 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for moving IPv4 GRE tunnels between namespaces was added in
commit b57708ad ("gre: add x-netns support"). The respective change
for IPv6 tunnels, commit 22f08069 ("ip6gre: add x-netns support")
did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to
another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from
ip6gre tunnels to allow moving ip6gre tunnel endpoints between network
namespaces.
Signed-off-by: NNiko Kortstrom <niko.kortstrom@nokia.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.

But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.

Fix this by disable neigh confirm when do pmtu update

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reported-by: NJianlin Shi <jishi@redhat.com>
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
  - tnl_update_pmtu()
    - skb_dst_update_pmtu()
      - ip6_rt_update_pmtu()
        - __ip6_rt_update_pmtu()
          - dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Suggested-by: NDavid Miller <davem@davemloft.net>
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.comCo-developed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net

The check for !md doens't really work for ip_tunnel_info_opts(info) which
only does info + 1. Also to avoid out-of-bounds access on info, it should
ensure options_len is not less than erspan_metadata in both erspan_xmit()
and ip6erspan_tunnel_xmit().

Fixes: 1a66a836 ("gre: add collect_md mode to ERSPAN tunnel")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6erspan driver calls ether_setup(), after commit 61e84623
("net: centralize net_device min/max MTU checking"), the range
of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.

It causes the dev mtu of the erspan device to not be greater
than 1500, this limit value is not correct for ip6erspan tap
device.

Fixes: 61e84623 ("net: centralize net_device min/max MTU checking")
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

In ip6erspan_tunnel_xmit(), if the skb will not be sent out, it has to
be freed on the tx_err path. Otherwise when deleting a netns, it would
cause dst/dev to leak, and dmesg shows:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull()
which may change skb->data, so we need to re-load ipv6h at
the right place.

Fixes: 898b2979 ("ip6_gre: Refactor ip6gre xmit codes")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a possible NULL pointer dereference in ip6erspan_set_version checking
nlattr data pointer

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7549 Comm: syz-executor432 Not tainted 5.0.0-rc6-next-20190218
#37
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6erspan_newlink+0x66/0x7b0 net/ipv6/ip6_gre.c:2210
  __rtnl_newlink+0x107b/0x16c0 net/core/rtnetlink.c:3176
  rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3234
  rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
  netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg+0xdd/0x130 net/socket.c:631
  ___sys_sendmsg+0x806/0x930 net/socket.c:2136
  __sys_sendmsg+0x105/0x1d0 net/socket.c:2174
  __do_sys_sendmsg net/socket.c:2183 [inline]
  __se_sys_sendmsg net/socket.c:2181 [inline]
  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2181
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440159
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffa69156e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440159
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000001 R09: 00000000004002c8
R10: 0000000000000011 R11: 0000000000000246 R12: 00000000004019e0
R13: 0000000000401a70 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 09f8a7d13b4faaa1 ]---
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 4974d5f6 ("net: ip6_gre: initialize erspan_ver just for erspan tunnels")
Reported-and-tested-by: syzbot+30191cf1057abd3064af@syzkaller.appspotmail.com
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Report erspan version field to userspace in ip6gre_fill_info just for
erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for
erspan version 1.
The issue can be triggered with the following reproducer:

$ip link add name gre6 type ip6gre local 2001::1 remote 2002::2
$ip link set gre6 up
$ip -d link sh gre6
14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0
    ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64

Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit c706863b ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bda ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863b ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Erspan_v4, Erspan_v6 protocol relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:

$ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \
    key 1 seq erspan_ver 1
$ip link set ip6erspan1 up
ip -d link sh ip6erspan1

ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT
    link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
    ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq

Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ip6gre_fill_info

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use ERSPAN key header field as tunnel key in gre_parse_header routine
since ERSPAN protocol sets the key field of the external GRE header to
0 resulting in a tunnel lookup fail in ip6gre_err.
In addition remove key field parsing and pskb_may_pull check in
erspan_rcv and ip6erspan_rcv

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove gre_hdr_len from ip6erspan_rcv routine signature since
it is not longer used
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As said in draft-foschiano-erspan-03#section4:

   Different frame variants known as "ERSPAN Types" can be
   distinguished based on the GRE "Protocol Type" field value: Type I
   and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].

So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().

Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We forgot to update ip6erspan version related info when changing link,
which will cause setting new hwid failed.
Reported-by: NJianlin Shi <jishi@redhat.com>
Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In changelink ops, the ip6gre_net pointer is retrieved from
dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not
unlinked from its current list and is relinked into another net
namespace. This corrupts the tunnel lists and can later trigger a kernel
oops.

Fix this by retrieving the netns from device private area.

Fixes: c8632fc3 ("net: ip6_gre: Split up ip6gre_changelink()")
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: NOlivier Matz <olivier.matz@6wind.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5 ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changed the is_gretap_dev and is_ip6gretap_dev logic from structure
comparison to string comparison of the rtnl_link_ops kind field.

This approach aligns with the current identification methods and function
names of vxlan and geneve network devices.

Convert mlxsw to use these helpers and use them in downstream mlx5 patch.
Signed-off-by: NOz Shlomo <ozsh@mellanox.com>
Reviewed-by: NEli Britstein <elibr@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same as ip_gre, use gre_parse_header to parse gre header in gre error
handler code.
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>