- 11 6月, 2014 1 次提交
-
-
由 Steven Miao 提交于
curr_x_count/curr_y_count need to be cleared here, keep this workaround This reverts commit dfb02f95f5430e47d0c49adbc4469d08eea38b94. Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
- 10 6月, 2014 1 次提交
-
-
由 Steven Miao 提交于
build error arch/blackfin/mach-bf533/boards/stamp.c: In function ‘stamp_init’: arch/blackfin/mach-bf533/boards/stamp.c:866: error: implicit declaration of function ‘gpio_request’ arch/blackfin/mach-bf533/boards/stamp.c:868: error: implicit declaration of function ‘gpio_direction_output’ arch/blackfin/mach-bf533/boards/stamp.c:869: error: implicit declaration of function ‘gpio_free’ Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
- 12 4月, 2014 10 次提交
-
-
由 Steven Miao 提交于
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE) Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Paul Bolle 提交于
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed as an IIO driver and support for it was added to the LM75 HWMON driver. But it was apparently overlooked to rename one reference to CONFIG_ADT75 to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Paul Bolle 提交于
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed as an IIO driver and added as a HWMON driver. But it was apparently overlooked to rename two references to CONFIG_AD7314 to CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Paul Bolle 提交于
In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from ad2s120x to ad2s1200. But it apparently forgot to rename the references to this driver in the BF537-STAMP code. Rename these now, and use the IS_ENABLED() macro, while we're at it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Paul Bolle 提交于
There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it once and for all by using IS_ENABLED(), which is designed to avoid issues like this. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
drop unused head file change pinmux request/free macro for backward compatiblity add function declaration Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
- 11 4月, 2014 4 次提交
-
-
由 Paul Bolle 提交于
The only user of Kconfig symbol IP_CHECKSUM_L1 got removed in v2.6.33, with commit ddf9ddac ("Blackfin: convert to generic checksum code"). We can remove the Kconfig entry for this unused symbol now. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Paul Bolle 提交于
The Kconfig symbol GENERIC_GPIO was removed in v3.10. Nothing cares about it anymore. It popped up somehow in v3.13, so it can be removed again. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
-
由 Thomas Gleixner 提交于
There is nothing special in that blackfin code. Use the core implementation. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Steven Miao <realmz6@gmail.com> Cc: bfin <adi-buildroot-devel@lists.sourceforge.net>
-
由 Paul Bolle 提交于
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
- 09 3月, 2014 2 次提交
-
-
由 Sonic Zhang 提交于
Put necessary SSYNC code into blackfin twi arch header. The generic TWI driver should not contain any architecture specific code. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Sonic Zhang 提交于
The ADI TWI peripheral is not binding to the Blackfin processor only. The bits macros and structs should be put in the generic include header. And update head file path in drivers accordingly. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 07 3月, 2014 2 次提交
-
-
由 Jiri Slaby 提交于
As the data parameter is not really used by any ftrace_dyn_arch_init, remove that from ftrace_dyn_arch_init. This also removes the addr local variable from ftrace_init which is now unused. Note the documentation was imprecise as it did not suggest to set (*data) to 0. Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Jiri Slaby 提交于
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any way, it just sets the value to 0. And this is used as a return value in the caller -- ftrace_init, which just checks the retval against zero. Note there is also "return 0" in every ftrace_dyn_arch_init. So it is enough to check the retval and remove all the indirect sets of data on all archs. Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz Cc: linux-arch@vger.kernel.org Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 10 2月, 2014 3 次提交
-
-
由 Sonic Zhang 提交于
It is better to keep this structure in the pinctrl-adi2 driver. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Tim Chen 提交于
This patch allows each architecture to add its specific assembly optimized arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for MCS lock and unlock functions. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: George Spelvin <linux@horizon.com> Cc: Rik vanRiel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: MichelLespinasse <walken@google.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESKSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Tim Chen 提交于
We perform a clean up of the Kbuid files in each architecture. We order the files in each Kbuild in alphabetical order by running the below script. for i in arch/*/include/asm/Kbuild do cat $i | gawk '/^generic-y/ { i = 3; do { for (; i <= NF; i++) { if ($i == "\\") { getline; i = 1; continue; } if ($i != "") hdr[$i] = $i; } break; } while (1); next; } // { print $0; } END { n = asort(hdr); for (i = 1; i <= n; i++) print "generic-y += " hdr[i]; }' > ${i}.sorted; mv ${i}.sorted $i; done Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: George Spelvin <linux@horizon.com> Cc: MichelLespinasse <walken@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> [ Fixed build bug. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 1月, 2014 9 次提交
-
-
由 Steven Miao 提交于
This patch removes CONFIG_MTD_PARTITIONS in config files for blackfin. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2. Signed-off-by: NEunbong Song <eunb.song@samsung.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Aaron Wu 提交于
Signed-off-by: NAaron Wu <Aaron.wu@analog.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Aaron Wu 提交于
Signed-off-by: NAaron Wu <Aaron.wu@analog.com> fix build error for bf527-ezkit_defconfig for old silicon
-
由 Sonic Zhang 提交于
Move code for the SEC faults from the IRQ hanlders into IRQ actions. refine bfin fault routine handle Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Steven Miao 提交于
blackfin: bf60x: clock: return 0 upon error from clk_round_rate() clk_round_rate() should return 0 upon an error, rather than returning a negative error code. This is because clk_round_rate() is being changed to return an unsigned return type rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Signed-off-by: NPaul Walmsley <pwalmsley@nvidia.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Jiang Liu 提交于
Commit 9a46ad6d "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: NJiang Liu <liuj97@gmail.com>
-
由 Chen Gang 提交于
For all uapi headers, need use "_UAPI" prefix for its guard macro (which will be stripped by "scripts/headers_installer.sh"). Also be sure that all files have their guard macros. Also be sure that all "#endif" are followed with comments, and no '\t' for guard macro Signed-off-by: NChen Gang <gang.chen@asianux.com>
-
- 25 1月, 2014 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 1月, 2014 1 次提交
-
-
由 Chen-Yu Tsai 提交于
stmmac callbacks have been extended for better separation. Update them to avoid breakage. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
We're going to be adding a few new barrier primitives, and in order to avoid endless duplication make more agressive use of asm-generic/barrier.h. Change the asm-generic/barrier.h such that it allows partial barrier definitions and fills out the rest with defaults. There are a few architectures (m32r, m68k) that could probably do away with their barrier.h file entirely but are kept for now due to their unconventional nop() implementation. Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Michael Neuling <mikey@neuling.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Victor Kaplansky <VICTORK@il.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20131213150640.846368594@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 07 1月, 2014 3 次提交
-
-
由 Hans Verkuil 提交于
The correct LLC DLL phase depends on the board layout, so this should be part of the platform_data. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Tested-by: NMartin Bugge <marbugge@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Martin Bugge 提交于
The free-run mode can be board-specific. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Signed-off-by: NMartin Bugge <marbugge@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Hans Verkuil 提交于
Added support for YCrCb analog input. If input is ADV7842_MODE_RGB and RGB quantization range is set to V4L2_DV_RGB_RANGE_AUTO, then video with CEA timings will be received as RGB. For ADV7842_MODE_COMP, automatic CSC mode will be selected. See table 48 on page 281 in "ADV7842 Hardware Manual, Rev. 0, January 2011" for details. Make sure that when switching inputs the RGB quantization range is updated as well. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Signed-off-by: NMats Randgaard <matrandg@cisco.com> Signed-off-by: NMartin Bugge <marbugge@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 18 12月, 2013 1 次提交
-
-
由 David S. Miller 提交于
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2013 1 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch adds common __clk_get(), __clk_put() clkdev helpers that replace their platform specific counterparts when the common clock API is used. The owner module pointer field is added to struct clk so a reference to the clock supplier module can be taken by the clock consumers. The owner module is assigned while the clock is being registered, in functions _clk_register() and __clk_register(). Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-