Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 2月, 2019 1 次提交
  3. 14 2月, 2019 3 次提交
  5. 01 2月, 2019 1 次提交
  7. 24 1月, 2019 1 次提交
  9. 11 1月, 2019 1 次提交
    • G
      ARM: integrator: impd1: use struct_size() in devm_kzalloc() · 21face6f
      由 Gustavo A. R. Silva 提交于 
      One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
      21face6f
  11. 10 1月, 2019 11 次提交
  13. 07 1月, 2019 1 次提交
    • D
      reset: socfpga: add an early reset driver for SoCFPGA · b3ca9888
      由 Dinh Nguyen 提交于 
      Create a separate reset driver that uses the reset operations in
reset-simple. The reset driver for the SoCFPGA platform needs to
register early in order to be able bring online timers that needed
early in the kernel bootup.

We do not need this early reset driver for Stratix10, because on
arm64, Linux does not need the timers are that in reset. Linux is
able to run just fine with the internal armv8 timer. Thus, we use
a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform.
The Stratix10 platform will continue to use the reset-simple platform
driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use
the early reset driver.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
[p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
      b3ca9888
  15. 06 1月, 2019 4 次提交
  17. 05 1月, 2019 2 次提交
    • M
      ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC · 8e564895
      由 Masahiro Yamada 提交于 
      Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
      8e564895
    • J
      mm: treewide: remove unused address argument from pte_alloc functions · 4cf58924
      由 Joel Fernandes (Google) 提交于 
      Patch series "Add support for fast mremap".

This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems.  There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work.  Also we find that there is no point in passing the 'address' to
pte_alloc since its unused.  This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well.  Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.

Build and boot tested on x86-64.  Build tested on arm64.  The config
enablement patch for arm64 will be posted in the future after more
testing.

The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from  pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.

// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.

virtual patch

@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@

 fn(...
- , T2 E2
 )
 { ... }

@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)

@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)

@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

 fn(...
-,  E2
 )

@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@

(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)

Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.comSigned-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4cf58924
  19. 04 1月, 2019 1 次提交
    • L
      Remove 'type' argument from access_ok() function · 96d4f267
      由 Linus Torvalds 提交于 
      Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      96d4f267
  21. 01 1月, 2019 6 次提交
  23. 30 12月, 2018 3 次提交
    • C
      kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops · cc028297
      由 Christophe Leroy 提交于 
      checkpatch.pl reports the following:

  WARNING: struct kgdb_arch should normally be const
  #28: FILE: arch/mips/kernel/kgdb.c:397:
  +struct kgdb_arch arch_kgdb_ops = {

This report makes sense, as all other ops struct, this
one should also be const. This patch does the change.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NPaul Burton <paul.burton@mips.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
      cc028297
    • D
      kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function() · 3cd99ac3
      由 Douglas Anderson 提交于 
      When I had lockdep turned on and dropped into kgdb I got a nice splat
on my system.  Specifically it hit:
  DEBUG_LOCKS_WARN_ON(current->hardirq_context)

Specifically it looked like this:
  sysrq: SysRq : DEBUG
  ------------[ cut here ]------------
  DEBUG_LOCKS_WARN_ON(current->hardirq_context)
  WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27
  pstate: 604003c9 (nZCv DAIF +PAN -UAO)
  pc : lockdep_hardirqs_on+0xf0/0x160
  ...
  Call trace:
   lockdep_hardirqs_on+0xf0/0x160
   trace_hardirqs_on+0x188/0x1ac
   kgdb_roundup_cpus+0x14/0x3c
   kgdb_cpu_enter+0x53c/0x5cc
   kgdb_handle_exception+0x180/0x1d4
   kgdb_compiled_brk_fn+0x30/0x3c
   brk_handler+0x134/0x178
   do_debug_exception+0xfc/0x178
   el1_dbg+0x18/0x78
   kgdb_breakpoint+0x34/0x58
   sysrq_handle_dbg+0x54/0x5c
   __handle_sysrq+0x114/0x21c
   handle_sysrq+0x30/0x3c
   qcom_geni_serial_isr+0x2dc/0x30c
  ...
  ...
  irq event stamp: ...45
  hardirqs last  enabled at (...44): [...] __do_softirq+0xd8/0x4e4
  hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130
  softirqs last  enabled at (...42): [...] _local_bh_enable+0x2c/0x34
  softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100
  ---[ end trace adf21f830c46e638 ]---

Looking closely at it, it seems like a really bad idea to be calling
local_irq_enable() in kgdb_roundup_cpus().  If nothing else that seems
like it could violate spinlock semantics and cause a deadlock.

Instead, let's use a private csd alongside
smp_call_function_single_async() to round up the other CPUs.  Using
smp_call_function_single_async() doesn't require interrupts to be
enabled so we can remove the offending bit of code.

In order to avoid duplicating this across all the architectures that
use the default kgdb_roundup_cpus(), we'll add a "weak" implementation
to debug_core.c.

Looking at all the people who previously had copies of this code,
there were a few variants.  I've attempted to keep the variants
working like they used to.  Specifically:
* For arch/arc we passed NULL to kgdb_nmicallback() instead of
  get_irq_regs().
* For arch/mips there was a bit of extra code around
  kgdb_nmicallback()

NOTE: In this patch we will still get into trouble if we try to round
up a CPU that failed to round up before.  We'll try to round it up
again and potentially hang when we try to grab the csd lock.  That's
not new behavior but we'll still try to do better in a future patch.
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
      3cd99ac3
    • D
      kgdb: Remove irq flags from roundup · 9ef7fa50
      由 Douglas Anderson 提交于 
      The function kgdb_roundup_cpus() was passed a parameter that was
documented as:

> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().

Nobody used those flags.  Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them.  So we can definitely remove the flags.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
      9ef7fa50
  25. 23 12月, 2018 2 次提交
  27. 21 12月, 2018 3 次提交