This patch adds the new top-level function crypto_rng_generate
which generates random numbers with additional input.  It also
extends the mid-level rng_gen_random function to take additional
data as input.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the top-level crypto_rng to the "new" style.
It was the last algorithm type added before we switched over
to the new way of doing things exemplified by shash.

All users will automatically switch over to the new interface.

Note that this patch does not touch the low-level interface to
rng implementations.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces crypto_pcomp_extsize function with
crypto_alg_extsize.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces crypto_shash_extsize function with
crypto_alg_extsize.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a crypto_alg_extsize helper that can be used
by algorithm types such as pcompress and shash.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Initialising the RNG in drbg_kcapi_init is a waste of precious
entropy because all users will immediately seed the RNG after
the allocation.

In fact, all users should seed the RNG before using it.  So there
is no point in doing the seeding in drbg_kcapi_init.

This patch removes the initial seeding and the user must seed
the RNG explicitly (as they all currently do).

This patch also changes drbg_kcapi_reset to allow reseeding.
That is, if you call it after a successful initial seeding, then
it will not reset the internal state of the DRBG before mixing
the new input and entropy.

If you still wish to reset the internal state, you can always
free the DRBG and allocate a new one.

Finally this patch removes locking from drbg_uninstantiate because
it's now only called from the destruction path which must not be
executed in parallel with normal operations.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NStephan Mueller <smueller@chronox.de>

As we moved the mutex init out of drbg_instantiate and into cra_init
we need to explicitly initialise the mutex in drbg_healthcheck_sanity.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NStephan Mueller <smueller@chronox.de>

As the DRBG does not operate on shadow copies of the DRBG instance
any more, the cipher handles only need to be allocated once during
initalization time and deallocated during uninstantiate time.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The creation of a shadow copy is intended to only hold a short term
lock. But the drawback is that parallel users have a very similar DRBG
state which only differs by a high-resolution time stamp.

The DRBG will now hold a long term lock. Therefore, the lock is changed
to a mutex which implies that the DRBG can only be used in process
context.

The lock now guards the instantiation as well as the entire DRBG
generation operation. Therefore, multiple callers are fully serialized
when generating a random number.

As the locking is changed to use a long-term lock to avoid such similar
DRBG states, the entire creation and maintenance of a shadow copy can be
removed.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The drbg_generate returns 0 in success case. That means that
drbg_generate_long will always only generate drbg_max_request_bytes at
most. Longer requests will be truncated to drbg_max_request_bytes.
Reported-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the documentation by including SEC1 into SEC2/3 doc
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We add a specific compatible for SEC1, to handle the differences
between SEC1 and SEC2+
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC1 bugs on 0 data hash, so we submit an already padded block representing 0 data
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC1 doesn't support scatter/gather, SEC1 doesn't handle link tables.
Therefore, for SEC1 we have to do it by SW. For that, we reserve
space at the end of the extended descriptor, in lieu of the space
reserved for the link tables on SEC2, and we perform sg_copy() when
preparing the descriptors

We also adapt the max buffer size which is only 32k on SEC1 while it
is 64k on SEC2+
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adapts the interrupts handling and reset function for
SEC1. On SEC1, registers are almost similar to SEC2+, but bits
are sometimes located at different places. So we need to define
TALITOS1 and TALITOS2 versions of some fields, and manage according
to whether it is SEC1 or SEC2.

On SEC1, only one interrupt vector is dedicated to the SEC, so only
interrupt_4ch is needed.

On SEC1, interrupts are enabled by clearing related bits in IMR,
while on SEC2, interrupts are enabled by seting the bits in IMR.

SEC1 also performs parity verification in the DES Unit. We have
to disable this feature because the test vectors provided in
the kernel have parity errors.

In reset functions, only SEC2 supports continuation after error.
For SEC1, we have to reset in all cases.

For errors handling, SEC2+ names have been kept, but displayed
text have been amended to reflect exact meaning on SEC1.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC 1.0, 1.2 and 2.x+ have different EU base addresses, so we need to
define pointers for each EU in the driver private data structure.
The proper address is set by the probe function depending on the
SEC type, in order to provide access to the proper address.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC1 descriptor is a bit different to SEC2+ descriptor.
talitos_submit() will have to copy hdr field into hdr1 field and
send the descriptor starting at hdr1 up to next_desc.
For SEC2, it remains unchanged and next_desc is just ignored.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

talitos descriptor is slightly different for SEC1 and SEC2+, so
lets the helper function that fills the descriptor take into account
the type of SEC.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We add a new feature in the features field, to mark compatible
"fsl,sec1.0"
We also define a helper function called has_ftr_sec1() to help
functions quickly determine if they are running on SEC1 or SEC2+.
When only SEC1 or SEC2 is compiled in, has_ftr_sec1() return
trivial corresponding value. If both are compiled in, feature
field is checked.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a CONFIG option to select SEC1, SEC2+ or both.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch enhances the talitos_desc struct with fields for SEC1.
SEC1 has only one header field, and has a 'next_desc' field in
addition.
This mixed descriptor will continue to fit SEC2, and for SEC1
we will recopy hdr value into hdr1 value in talitos_submit()
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a helper function for reads and writes of the len
param of the talitos descriptor. This will help implement
SEC1 later.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

map_single_talitos_ptr() is always called with extent == 0, so lets remove this unused parameter
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

j_extent field is specific to SEC2 so we add a helper function to clear it
so that SEC1 can redefine that function as nop
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Linux CodyingStyle recommends to use short variables for local
variables. ptr is just good enough for those 3 lines functions.
It helps keep single lines shorter than 80 characters.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch refactors the handling of the input and output data that is quite
similar in several functions
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Do use zero_entry value to init the descriptors ptrs to zero instead of
writing 0 in each field
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The buffer uses for temporary data must be cleared entirely. In AES192
the used buffer is drbg_statelen(drbg) + drbg_blocklen(drbg) as
documented in the comment above drbg_ctr_df.

This patch ensures that the temp buffer is completely wiped.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

backlog is not initialised so in the case where
cpg->eng_st != ENGINE_IDLE it is never initialised and
hence which could lead to an illegal memory dereference
in the statement:

  backlog->complete(backlog, -EINPROGRESS);

Discovered with cppcheck static analsys:
[drivers/crypto/mv_cesa.c:616]:
   (error) Uninitialized variable: backlog
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 9c521a20 ("crypto: api - remove instance when test failed")
tried to grab a module reference count before the module was even set.

Worse, it then goes on to free the module reference count after it is
set so you quickly end up with a negative module reference count which
prevents people from using any instances belonging to that module.

This patch moves the module initialisation before the reference
count.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge second patchbomb from Andrew Morton:

 - the rest of MM

 - various misc bits

 - add ability to run /sbin/reboot at reboot time

 - printk/vsprintf changes

 - fiddle with seq_printf() return value

* akpm: (114 commits)
  parisc: remove use of seq_printf return value
  lru_cache: remove use of seq_printf return value
  tracing: remove use of seq_printf return value
  cgroup: remove use of seq_printf return value
  proc: remove use of seq_printf return value
  s390: remove use of seq_printf return value
  cris fasttimer: remove use of seq_printf return value
  cris: remove use of seq_printf return value
  openrisc: remove use of seq_printf return value
  ARM: plat-pxa: remove use of seq_printf return value
  nios2: cpuinfo: remove use of seq_printf return value
  microblaze: mb: remove use of seq_printf return value
  ipc: remove use of seq_printf return value
  rtc: remove use of seq_printf return value
  power: wakeup: remove use of seq_printf return value
  x86: mtrr: if: remove use of seq_printf return value
  linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
  MAINTAINERS: CREDITS: remove Stefano Brivio from B43
  .mailmap: add Ricardo Ribalda
  CREDITS: add Ricardo Ribalda Delgado
  ...

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Remove unused return value from trace_lookup_stack
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Coalesce formats, realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>