This passes it in to io-wq, so it assumes the right fs_struct when
executing async work that may need to do lookups.

Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For non-blocking issue, we set IOCB_NOWAIT in the kiocb. However, on a
raw block device, this yields an -EOPNOTSUPP return, as non-blocking
writes aren't supported. Turn this -EOPNOTSUPP into -EAGAIN, so we retry
from blocking context with IOCB_NOWAIT cleared.

Cc: stable@vger.kernel.org # 5.5
Signed-off-by: NJens Axboe <axboe@kernel.dk>

openat() and statx() may have allocated ->open.filename, which should be
be put. Add cleanup handlers for them.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Allocated iovec is freed only in io_{read,write,send,recv)(), and just
leaves it if an error occured. There are plenty of such cases:
- cancellation of non-head requests
- fail grabbing files in __io_queue_sqe()
- set REQ_F_NOWAIT and returning in __io_queue_sqe()

Add REQ_F_NEED_CLEANUP, which will force such requests with custom
allocated resourses go through cleanup handlers on put.

Cc: stable@vger.kernel.org # 5.5
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

struct io_async_open is unused, remove it.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In io_uring_poll() we must flush overflowed CQ events before to
check if there are CQ events available, to avoid missing events.

We call the io_cqring_events() that checks and flushes any overflow
and returns the number of CQ events available.
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All of these opcodes take a directory file descriptor. We can't easily
support fixed files for these operations, and the use case for that
probably isn't all that clear (or sensible) anyway.

Disable IOSQE_FIXED_FILE for these operations.
Reported-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After defer, a request will be prepared, that includes allocating iovec
if needed, and then submitted through io_wq_submit_work() but not custom
handler (e.g. io_rw_async()/io_sendrecv_async()). However, it'll leak
iovec, as it's in io-wq and the code goes as follows:

io_read() {
	if (!io_wq_current_is_worker())
		kfree(iovec);
}

Put all deallocation logic in io_{read,write,send,recv}(), which will
leave the memory, if going async with -EAGAIN.

It also fixes a leak after failed io_alloc_async_ctx() in
io_{recv,send}_msg().

Cc: stable@vger.kernel.org # 5.5
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make bitfields of size 1 bit be unsigned (since there is no room
for the sign bit).
This clears up the sparse warnings:

  CHECK   ../fs/io_uring.c
../fs/io_uring.c:207:50: error: dubious one-bit signed bitfield
../fs/io_uring.c:208:55: error: dubious one-bit signed bitfield
../fs/io_uring.c:209:63: error: dubious one-bit signed bitfield
../fs/io_uring.c:210:54: error: dubious one-bit signed bitfield
../fs/io_uring.c:211:57: error: dubious one-bit signed bitfield

Found by sight and then verified with sparse.

Fixes: 69b3e546 ("io_uring: change io_ring_ctx bool fields into bit fields")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: io-uring@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fail fast if can't grab mm, so past that requests always have an mm
when required. This allows us to remove req->user altogether.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzbot reports a use-after-free in io_ring_file_ref_switch() when it
tries to switch back to percpu mode. When we put the final reference to
the table by calling percpu_ref_kill_and_confirm(), we don't want the
zero reference to queue async work for flushing the potentially queued
up items. We currently do a few flush_work(), but they merely paper
around the issue, since the work item may not have been queued yet
depending on the when the percpu-ref callback gets run.

Coming into the file unregister, we know we have the ring quiesced.
io_ring_file_ref_switch() can check for whether or not the ref is dying
or not, and not queue anything async at that point. Once the ref has
been confirmed killed, flush any potential items manually.

Reported-by: syzbot+7caeaea49c2c8a591e3d@syzkaller.appspotmail.com
Fixes: 05f3fb3c ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

As part of io_uring shutdown, we cancel work that is pending and won't
necessarily complete on its own. That includes requests like poll
commands and timeouts.

If we're using SQPOLL for kernel side submission and we shutdown the
ring immediately after queueing such work, we can race with the sqthread
doing the submission. This means we may miss cancelling some work, which
results in the io_uring shutdown hanging forever.

Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Both iocb_flags() and kiocb_set_rw_flags() are inline and modify
kiocb->ki_flags. Place them close, so they can be potentially better
optimised.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Grab requests from cache-array from the end, so can get by only
free_reqs.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Andres correctly points out that read-ahead can block, if it needs to
read in meta data (or even just through the page cache page allocations).
Play it safe for now and just ensure WILLNEED is also punted to async
context.

While in there, allow the file settings hints from non-blocking
context. They don't need to start/do IO, and we can safely do them
inline.

Fixes: 4840e418 ("io_uring: add IORING_OP_FADVISE")
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We punt close to async for the final fput(), but we log the completion
even before that even in that case. We rely on the request not having
a files table assigned to detect what the final async close should do.
However, if we punt the async queue to __io_queue_sqe(), we'll get
->files assigned and this makes io_close_finish() think it should both
close the filp again (which does no harm) AND log a new CQE event for
this request. This causes duplicate CQEs.

Queue the request up for async manually so we don't grab files
needlessly and trigger this condition.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It won't ever get into io_prep_rw() when req->file haven't been set in
io_req_set_file(), hence remove the check.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we have a read/write that is deferred, we already setup the async IO
context for that request, and mapped it. When we later try and execute
the request and we get -EAGAIN, we don't want to attempt to re-map it.
If we do, we end up with garbage in the iovec, which typically leads
to an -EFAULT or -EINVAL completion.

Cc: stable@vger.kernel.org # 5.5
Reported-by: NDan Melnic <dmm@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Don't use the recvmsg/sendmsg helpers, use the same helpers that the
recv(2) and send(2) system calls use.
Reported-by: N李通洲 <carter.li@eoitek.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we have nested or circular eventfd wakeups, then we can deadlock if
we run them inline from our poll waitqueue wakeup handler. It's also
possible to have very long chains of notifications, to the extent where
we could risk blowing the stack.

Check the eventfd recursion count before calling eventfd_signal(). If
it's non-zero, then punt the signaling to async context. This is always
safe, as it takes us out-of-line in terms of stack and locking context.

Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In order to provide a clearer, more symmetric API for pinning and
unpinning DMA pages.  This way, pin_user_pages*() calls match up with
unpin_user_pages*() calls, and the API is a lot closer to being
self-explanatory.

Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.comSigned-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert fs/io_uring to use the new pin_user_pages() call, which sets
FOLL_PIN.  Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().

In partial anticipation of this work, the io_uring code was already
calling put_user_page() instead of put_page().  Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required here is
to change get_user_pages() to pin_user_pages().

Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.comSigned-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With nesting of anonymous unions and structs it's hard to
review layout changes. It's better to ask the compiler
for these things.
Signed-off-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It can be hard to know exactly what is registered with the ring.
Especially for credentials, it'd be handy to be able to see which
ones are registered, what personalities they have, and what the ID
of each of them is.

This adds support for showing information registered in the ring from
the fdinfo of the io_uring fd. Here's an example from a test case that
registers 4 files (two of them sparse), 4 buffers, and 2 personalities:

pos:	0
flags:	02000002
mnt_id:	14
UserFiles:	4
    0: file-no-1
    1: file-no-2
    2: <none>
    3: <none>
UserBufs:	4
    0: 0x563817c46000/128
    1: 0x563817c47000/256
    2: 0x563817c48000/512
    3: 0x563817c49000/1024
Personalities:
    1
	Uid:	0		0		0		0
	Gid:	0		0		0		0
	Groups:	0
	CapEff:	0000003fffffffff
    2
	Uid:	0		0		0		0
	Gid:	0		0		0		0
	Groups:	0
	CapEff:	0000003fffffffff
Suggested-by: NJann Horn <jannh@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This adds IORING_OP_EPOLL_CTL, which can perform the same work as the
epoll_ctl(2) system call.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We're not consistent in how the file table is grabbed and assigned if we
have a command linked that requires the use of it.

Add ->file_table to the io_op_defs[] array, and use that to determine
when to grab the table instead of having the handlers set it if they
need to defer. This also means we can kill the IO_WQ_WORK_NEEDS_FILES
flag. We always initialize work->files, so io-wq can just check for
that.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For personalities previously registered via IORING_REGISTER_PERSONALITY,
allow any command to select them. This is done through setting
sqe->personality to the id returned from registration, and then flagging
sqe->flags with IOSQE_PERSONALITY.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If an application wants to use a ring with different kinds of
credentials, it can register them upfront. We don't lookup credentials,
the credentials of the task calling IORING_REGISTER_PERSONALITY is used.

An 'id' is returned for the application to use in subsequent personality
support.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If IORING_SETUP_ATTACH_WQ is set, it expects wq_fd in io_uring_params to
be a valid io_uring fd io-wq of which will be shared with the newly
created io_uring instance. If the flag is set but it can't share io-wq,
it fails.

This allows creation of "sibling" io_urings, where we prefer to keep the
SQ/CQ private, but want to share the async backend to minimize the amount
of overhead associated with having multiple rings that belong to the same
backend.
Reported-by: NJens Axboe <axboe@kernel.dk>
Reported-by: NDaurnimator <quae@daurnimator.com>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.

Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.

Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In case of out of memory the second argument of percpu_ref_put_many() in
io_submit_sqes() may evaluate into "nr - (-EAGAIN)", that is clearly
wrong.

Fixes: 2b85edfc ("io_uring: batch getting pcpu references")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Draining the middle of a link is tricky, so leave a comment there
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For the non-vectored variant of READV/WRITEV, we don't need to setup an
async io context, and we flag that appropriately in the io_op_defs
array. However, in fixing this for the 5.5 kernel in commit 74566df3
we didn't have these opcodes, so the check there was added just for the
READ_FIXED and WRITE_FIXED opcodes. Replace that check with just a
single check for needing async context, that covers all four of these
read/write variants that don't use an iovec.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we're sharing the ring across forks, then one process exiting means
that we cancel ALL work and prevent future work. This is overly
restrictive. As long as we cancel the work associated with the files
from the current task, it's safe to let others persist. Normal fd close
on exit will still wait (and cancel) pending work.

Fixes: fcb323cc ("io_uring: io_uring: add support for async work inheriting files")
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This ends up being too restrictive for tasks that willingly fork and
share the ring between forks. Andres reports that this breaks his
postgresql work. Since we're close to 5.5 release, revert this change
for now.

Cc: stable@vger.kernel.org
Fixes: 44d28279 ("io_uring: only allow submit from owning task")
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

REQ_F_FORCE_ASYNC is checked only for the head of a link. Fix it.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Whenever IOSQE_ASYNC is set, requests will be punted to async without
getting into io_issue_req() and without proper preparation done (e.g.
io_req_defer_prep()). Hence they will be left uninitialised.

Prepare them before punting.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Don't rely on implicit ordering of IORING_OP_ and explicitly place them
at a right place in io_op_defs. Now former comments are now a part of
the code and won't ever outdate.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For each IOSQE_* flag there is a corresponding REQ_F_* flag. And there
is a repetitive pattern of their translation:
e.g. if (sqe->flags & SQE_FLAG*) req->flags |= REQ_F_FLAG*

Use same numeric values/bits for them and copy instead of manual
handling.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A request can get into the defer list only once, there is no need for
marking it as drained, so remove it. This probably was left after
extracting __need_defer() for use in timeouts.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>