Add a DMI quirk for the Point of View TAB-P1006W-232 (v1.0) tablet, this
tablet is special in a number of ways:

1) It uses the 2nd GPIO resource in the ACPI tables for jack-detect rather
then using the rt5651 codec's builtin jack-detect functionality

2) It uses the 3th GPIO resource in the ACPI tables to control the
external amplifier rather then the usual first non GpioInt resource and
the GPIO is active-low.

3) It is a BYTCR device, without a CHAN package and it uses SSP0-AIF1
rather then the default SSP0-AIF2.

4) Its internal mic is a digital mic (the first x86 rt5651 device that
I'm aware of which does this), combined with having its headset-mic
connected to IN2.
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some board designs hook the jack-detect up to an external GPIO, rather
then to one of the codec pins, add support for this.
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add quirks module parameter to allow manually specifying quirks
from the kernel commandline (or modprobe.conf).
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit 37c7401e ("ASoC: Intel: bytcr_rt5651: Fix DMIC map
headsetmic mapping"), changed the headsetmic mapping from IN3P to IN2P,
this was based on the observation that all bytcr_rt5651 devices I have
access to (7 devices) where all using IN3P for the headsetmic. This was
an attempt to unifify / simplify the mapping, but it was wrong.

None of those devices was actually using a digital internal mic. Now I've
access to a Point of View TAB-P1006W-232 (v1.0) tabler, which does use a
DMIC and it does have its headsetmic connected to IN2P, showing that the
original mapping was correct, so this commit reverts the change changing
the mapping back to IN2P.

Fixes: 37c7401e ("ASoC: Intel: bytcr_rt5651: Fix DMIC map ... mapping")
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some board designs hook the jack-detect up to an external GPIO,
rather then to one of the codec pins, add support for this.

Figuring out which GPIO to use is pretty much board specific so I've
chosen to let the machine driver pass the gpio_desc as data argument to
snd_soc_component_set_jack() rather then add support for getting the
GPIO to the codec driver. This keeps the codec code nice and clean.

Note that using an external GPIO for this conflicts with button-press
support, so this commit disables button-press support when an
external GPIO is used.
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some BYT platforms have a RT5651 codec while using an ACPI node with
a HID of 10EC5640 to describe the coded. Add the 10EC5640 HID to the
acpi_device_id list, so that the rt5651 will bind to the codec on these
devices.

Like the rt5645 and rt5670 drivers which also have the 10EC5640 ACPI HID
in their acpi_device_id list for similar reasons, the rt5651 driver checks
the codecs device-id register so that it will only bind if the codec
actually is a rt5651 and it will ignore actual rt5640 codecs.
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Point of View TAB-P1006W-232 (v1.0) tablet uses 10EC5640 as
ACPI HID, but it has a rt5651 codec add a quirk for this.
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current BSDSR/BSDISR are using temporary/generic settings, but it can't
handle all SRCx/SoC. It needs to handle correctry.
Otherwise, sampling rate converted sound channel will be broken if it
was TDM. One note is that it needs to overwrite settings on E3 case.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nchaoliang qin <chaoliang.qin.jg@renesas.com>
Tested-by: NYusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch introduces "sclk-strength" property to allow SCLK pad drive
strength to be changed via device tree.

When running playback test on LS1028ARDB, Tx Frame sync error interrupt
will occur sometimes. Some noises also exist. After changing SCLK pad
drive strength to the maximum value, the issues are gone.
Signed-off-by: NAlison Wang <alison.wang@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added SPDIF driver build related changes.
Signed-off-by: NMaruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added SPDIF audio driver. This provides playback and capture of
AES audio over SPDIF interface.
Signed-off-by: NMaruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added documentation for SPDIF IP DT bindings.
Signed-off-by: NMaruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add Digital Audio Interface driver that convers PDM bitstream to PCM
format.

Features:
- Fixed filtering characteristics for audio application.
- Full or partial set of channels operation with individual enable control.
- Programmable PDM clock generator.
- Programmable decimation rate.
- 16-bit signed output result.
- Overall stopband attenuation more than 80dB.
- Overall passband ripple less than 0.2dB.
Signed-off-by: NCosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Document the bindings for MICFIL DAI.
Signed-off-by: NCosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit f84a6273 ("ASoC: pxa: remove raumfeld machine driver")
removed the Raumfeld ASoC machine driver but forgot to kill one line
in the Makefile.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:

sound/soc/codecs/rt298.c:992:6-8: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:995:6-9: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:317:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:320:5-8: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:348:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:351:5-8: WARNING: Comparison to bool
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The buf in rl6347a_hw_read is __be32.

Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The eq parameters binary is stored in __be. However, it is unsigned short
in rt5645_eq_param_s{} which will cause incorrect type assignment. So add
struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to
unsigned short in rt5645->eq_param.

Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Sparse:
da7219.c:841:57: warning: dubious: x & !y

Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Sparse.

da7219.c:440:44: warning: cast to restricted __le16
da7219.c:461:13: warning: incorrect type in assignment (different base types)
da7219.c:461:13:    expected unsigned short [unsigned] [usertype] val
da7219.c:461:13:    got restricted __le16 [usertype] <noident>
da7219.c:1451:16: warning: incorrect type in assignment (different base types)
da7219.c:1451:16:    expected unsigned short [unsigned] [usertype] offset
da7219.c:1451:16:    got restricted __le16 [usertype] <noident>

da7219-aad.c:150:37: warning: incorrect type in assignment (different base types)
da7219-aad.c:150:37:    expected unsigned short [unsigned] [usertype] tonegen_freq_hptest
da7219-aad.c:150:37:    got restricted __le16 [usertype] <noident>
da7219-aad.c:157:37: warning: incorrect type in assignment (different base types)
da7219-aad.c:157:37:    expected unsigned short [unsigned] [usertype] tonegen_freq_hptest
da7219-aad.c:157:37:    got restricted __le16 [usertype] <noident>

Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
mt6351.c:1418:5-8: Unneeded variable: "ret". Return "0" on line 1437
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/tscs42xx.c:392:5-31: WARNING: Comparison to bool
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
nau8824.c:810:6-12: ERROR: Assignment of bool to non-0/1 constant
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/rt5651.c:750:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5651.c:754:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5651.c:2192:1-16: WARNING: Assignment of bool to 0/1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/max98927.c:508:2-20: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:889:3-28: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:891:3-28: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:893:2-27: WARNING: Assignment of bool to 0/1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/rt5640.c:980:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5640.c:984:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5640.c:2825:1-16: WARNING: Assignment of bool to 0/1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/rt286.c:927:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:930:5-8: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:299:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:302:5-8: WARNING: Comparison to bool
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:

sound/soc/codecs/rt274.c:958:6-8: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:961:6-9: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:384:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:387:5-8: WARNING: Comparison to bool
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:
sound/soc/codecs/cs4271.c:226:2-16: WARNING: Assignment of bool to 0/1
sound/soc/codecs/cs4271.c:229:2-16: WARNING: Assignment of bool to 0/1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Reported by Coccinelle:

sound/soc/codecs/max98373.c:411:2-20: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98373.c:922:2-27: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98373.c:924:2-27: WARNING: Assignment of bool to 0/1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some mux/mixer are not used. Remove them from the driver.
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rt5645_if3_adc_in_mux, rt5645_inr_mux, and rt5645_inl_mux are not used.
Remove them from the driver.
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Missing or spurious parameter descriptions. Fix warnings with W=1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fix warnings with W=1

If these variables are useful this driver should be modified to expose
them.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fix warnings with W=1

If these variables are useful then this driver should be modified to
expose them.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

No reason why this is global, fix warnings with W=1
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

ak4458 driver supports also ak4497 codec.
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

AK4497 is a 32-bit 2ch DAC and has the same register
map as AK4458 with few exceptions:

* AK4497 has one more register at the end of register space
  DFS_READ which is a read only register that allows users
  to read FS Auto Detection mode. We currently do not use
  this register so we use the same regmap structure as for ak4458.

* Because AK4458 is an 8ch DAC there are some fields that are
  only used by AK4458 and marked as reserved for AK4497, so for
  this reason we need to have a distinct set of controls, widgets
  and routes.

Datasheet for AK4497 is at:
https://www.akm.com/akm/en/file/ev-board-manual/AK4497EQ.pdf

Datasheet for AK4458 is at:
https://www.akm.com/akm/en/file/datasheet/AK4458VN.pdfSigned-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>