conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series
it will become the same thing as COMPAT and conditional will die out.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series
it will become the same thing as COMPAT and conditional will die out.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite
(!CONFIG_ODD_RT_SIGACTION); the only two architectures that
need it are alpha and sparc.  The reason for use of CONFIG_...
instead of __ARCH_... is that it's needed only kernel-side
and doing it that way avoids a mess with include order on many
architectures.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Conditional on CONFIG_GENERIC_SIGALTSTACK; architectures that do not
select it are completely unaffected
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently only block_dev and uprobes use percpu_rw_semaphore,
add the config option selected by BLOCK || UPROBES.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since GCC 4.4, there have been __builtin_bswap32() and __builtin_bswap16()
intrinsics. A __builtin_bswap16() came a little later (4.6 for PowerPC,
48 for other platforms).

By using these instead of the inline assembler that most architectures
have in their __arch_swabXX() macros, we let the compiler see what's
actually happening. The resulting code should be at least as good, and
much *better* in the cases where it can be combined with a nearby load
or store, using a load-and-byteswap or store-and-byteswap instruction
(e.g. lwbrx/stwbrx on PowerPC, movbe on Atom).

When GCC is sufficiently recent *and* the architecture opts in to using
the intrinsics by setting CONFIG_ARCH_USE_BUILTIN_BSWAP, they will be
used in preference to the __arch_swabXX() macros. An architecture which
does not set ARCH_USE_BUILTIN_BSWAP will continue to use its own
hand-crafted macros.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>

Create a new subsystem that probes on kernel boundaries
to keep track of the transitions between level contexts
with two basic initial contexts: user or kernel.

This is an abstraction of some RCU code that use such tracking
to implement its userspace extended quiescent state.

We need to pull this up from RCU into this new level of indirection
because this tracking is also going to be used to implement an "on
demand" generic virtual cputime accounting. A necessary step to
shutdown the tick while still accounting the cputime.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
[ paulmck: fix whitespace error and email address. ]
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

... and get rid of idiotic struct pt_regs * in asm-generic/syscalls.h
prototypes of the same, while we are at it.  Eventually we want those
in linux/syscalls.h, of course, but that'll have to wait a bit.

Note that there are *three* variants of sys_clone() order of arguments.
Braindamage galore...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* allow kernel_execve() leave the actual return to userland to
caller (selected by CONFIG_GENERIC_KERNEL_EXECVE).  Callers
updated accordingly.
* architecture that does select GENERIC_KERNEL_EXECVE in its
Kconfig should have its ret_from_kernel_thread() do this:
	call schedule_tail
	call the callback left for it by copy_thread(); if it ever
returns, that's because it has just done successful kernel_execve()
	jump to return from syscall
IOW, its only difference from ret_from_fork() is that it does call the
callback.
* such an architecture should also get rid of ret_from_kernel_execve()
and __ARCH_WANT_KERNEL_EXECVE

This is the last part of infrastructure patches in that area - from
that point on work on different architectures can live independently.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cleanup patch in preparation for transparent hugepage support on s390.
Adding new architectures to the TRANSPARENT_HUGEPAGE config option can
make the "depends" line rather ugly, like "depends on (X86 || (S390 &&
64BIT)) && MMU".

This patch adds a HAVE_ARCH_TRANSPARENT_HUGEPAGE instead.  x86 already has
MMU "def_bool y", so the MMU check is superfluous there and
HAVE_ARCH_TRANSPARENT_HUGEPAGE can be selected in arch/x86/Kconfig.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let architectures select GENERIC_KERNEL_THREAD and have their copy_thread()
treat NULL regs as "it came from kernel_thread(), sp argument contains
the function new thread will be calling and stack_size - the argument for
that function".  Switching the architectures begins shortly...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Create a new config option under the RCU menu that put
CPUs under RCU extended quiescent state (as in dynticks
idle mode) when they run in userspace. This require
some contribution from architectures to hook into kernel
and userspace boundaries.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

There is no known reason for this option to be unavailable on other
archs than x86. They just need to call enable_sched_clock_irqtime()
if they have a sufficiently finegrained clock to make it working.

Move it to the general option and let the user choose between
it and pure tick based or virtual cputime accounting.

Note that virtual cputime accounting already performs a finegrained
irqtime accounting. CONFIG_IRQ_TIME_ACCOUNTING is a kind of middle ground
between tick and virtual based accounting. So CONFIG_IRQ_TIME_ACCOUNTING
and CONFIG_VIRT_CPU_ACCOUNTING are mutually exclusive choices.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>

S390, ia64 and powerpc all define their own version
of CONFIG_VIRT_CPU_ACCOUNTING. Generalize the config
and its description to a single place to avoid
duplication.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>

Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.

Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.

Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples.  This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Original-patch-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This brings a new API to help the selective dump of registers on event
sampling, and its implementation for x86 arch.

Added HAVE_PERF_REGS config option to determine if the architecture
provides perf registers ABI.

The information about desired registers will be passed in u64 mask.
It's up to the architecture to map the registers into the mask bits.

For the x86 arch implementation, both 32 and 64 bit registers bits are
defined within single enum to ensure 64 bit system can provide register
dump for compat task if needed in the future.
Original-patch-by: NFrederic Weisbecker <fweisbec@gmail.com>
[ Added missing linux/errno.h include ]
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead.  This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.

CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type
and gives back to the system. Kernel is allowed to allocate only movable
pages within CMA's managed memory so that it can be used for example for
page cache when DMA mapping do not use it. On
dma_alloc_from_contiguous() request such pages are migrated out of CMA
area to free required contiguous block and fulfill the request. This
allows to allocate large contiguous chunks of memory at any time
assuming that there is enough free memory available in the system.

This code is heavily based on earlier works by Michal Nazarewicz.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NRob Clark <rob.clark@linaro.org>
Tested-by: NOhad Ben-Cohen <ohad@wizery.com>
Tested-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: NRobert Nelson <robertcnelson@gmail.com>
Tested-by: NBarry Song <Baohua.Song@csr.com>

Commit f3f096cf ("tracing: Provide trace events interface for
uprobes") throws a warning about unmet dependencies.

The exact warning message is:
	warning: (UPROBE_EVENT) selects UPROBES which has unmet direct dependencies (UPROBE_EVENTS && PERF_EVENTS)

This is due to a typo in arch/Kconfig file. Fix similar typos in
the uprobetracer documentation.

Also add sample format of a uprobe event in the uprobetracer
documentation as suggested by Masami Hiramatsu.
Reported-by: NStephen Boyd <sboyd@codeaurora.org>
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120508111126.21004.38285.sendpatchset@srdronam.in.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Replace __HAVE_ARCH_TASK_ALLOCATOR and __HAVE_ARCH_THREAD_ALLOCATOR
with proper config switches.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20120505150142.371309416@linutronix.de

Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.

The following example shows how to dump the instruction pointer
and %ax a register at the probed text address.  Here we are
trying to probe zfree in /bin/zsh:

 # cd /sys/kernel/debug/tracing/
 # cat /proc/`pgrep  zsh`/maps | grep /bin/zsh | grep r-xp
 00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
 # objdump -T /bin/zsh | grep -w zfree
 0000000000446420 g    DF .text  0000000000000012  Base
 zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
 # cat uprobe_events
 p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
 # echo 1 > events/uprobes/enable
 # sleep 20
 # echo 0 > events/uprobes/enable
 # cat trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
              zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
              zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that all archs except ia64 are converted, replace the config and
let the ia64 select CONFIG_ARCH_INIT_TASK
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085035.867948914@linutronix.de

All archs define init_task in the same way (except ia64, but there is
no particular reason why ia64 cannot use the common version). Create a
generic instance so all archs can be converted over.

The config switch is temporary and will be removed when all archs are
converted over.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20120503085034.092585287@linutronix.de

All SMP architectures have magic to fork the idle task and to store it
for reusage when cpu hotplug is enabled. Provide a generic
infrastructure for it.

Create/reinit the idle thread for the cpu which is brought up in the
generic code and hand the thread pointer to the architecture code via
__cpu_up().

Note, that fork_idle() is called via a workqueue, because this
guarantees that the idle thread does not get a reference to a user
space VM. This can happen when the boot process did not bring up all
possible cpus and a later cpu_up() is initiated via the sysfs
interface. In that case fork_idle() would be called in the context of
the user space task and take a reference on the user space VM.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org
Acked-by: NVenkatesh Pallipadi <venki@google.com>
Link: http://lkml.kernel.org/r/20120420124557.102478630@linutronix.de

This change adds support for a new ptrace option, PTRACE_O_TRACESECCOMP,
and a new return value for seccomp BPF programs, SECCOMP_RET_TRACE.

When a tracer specifies the PTRACE_O_TRACESECCOMP ptrace option, the
tracer will be notified, via PTRACE_EVENT_SECCOMP, for any syscall that
results in a BPF program returning SECCOMP_RET_TRACE.  The 16-bit
SECCOMP_RET_DATA mask of the BPF program return value will be passed as
the ptrace_message and may be retrieved using PTRACE_GETEVENTMSG.

If the subordinate process is not using seccomp filter, then no
system call notifications will occur even if the option is specified.

If there is no tracer with PTRACE_O_TRACESECCOMP when SECCOMP_RET_TRACE
is returned, the system call will not be executed and an -ENOSYS errno
will be returned to userspace.

This change adds a dependency on the system call slow path.  Any future
efforts to use the system call fast path for seccomp filter will need to
address this restriction.
Signed-off-by: NWill Drewry <wad@chromium.org>
Acked-by: NEric Paris <eparis@redhat.com>

v18: - rebase
     - comment fatal_signal check
     - acked-by
     - drop secure_computing_int comment
v17: - ...
v16: - update PT_TRACE_MASK to 0xbf4 so that STOP isn't clear on SETOPTIONS call (indan@nul.nu)
       [note PT_TRACE_MASK disappears in linux-next]
v15: - add audit support for non-zero return codes
     - clean up style (indan@nul.nu)
v14: - rebase/nochanges
v13: - rebase on to 88ebdda6
       (Brings back a change to ptrace.c and the masks.)
v12: - rebase to linux-next
     - use ptrace_event and update arch/Kconfig to mention slow-path dependency
     - drop all tracehook changes and inclusion (oleg@redhat.com)
v11: - invert the logic to just make it a PTRACE_SYSCALL accelerator
       (indan@nul.nu)
v10: - moved to PTRACE_O_SECCOMP / PT_TRACE_SECCOMP
v9:  - n/a
v8:  - guarded PTRACE_SECCOMP use with an ifdef
v7:  - introduced
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Adds a new return value to seccomp filters that triggers a SIGSYS to be
delivered with the new SYS_SECCOMP si_code.

This allows in-process system call emulation, including just specifying
an errno or cleanly dumping core, rather than just dying.
Suggested-by: NMarkus Gutschke <markus@chromium.org>
Suggested-by: NJulien Tinnes <jln@chromium.org>
Signed-off-by: NWill Drewry <wad@chromium.org>
Acked-by: NEric Paris <eparis@redhat.com>

v18: - acked-by, rebase
     - don't mention secure_computing_int() anymore
v15: - use audit_seccomp/skip
     - pad out error spacing; clean up switch (indan@nul.nu)
v14: - n/a
v13: - rebase on to 88ebdda6
v12: - rebase on to linux-next
v11: - clarify the comment (indan@nul.nu)
     - s/sigtrap/sigsys
v10: - use SIGSYS, syscall_get_arch, updates arch/Kconfig
       note suggested-by (though original suggestion had other behaviors)
v9:  - changes to SIGILL
v8:  - clean up based on changes to dependent patches
v7:  - introduction
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

This change adds the SECCOMP_RET_ERRNO as a valid return value from a
seccomp filter.  Additionally, it makes the first use of the lower
16-bits for storing a filter-supplied errno.  16-bits is more than
enough for the errno-base.h calls.

Returning errors instead of immediately terminating processes that
violate seccomp policy allow for broader use of this functionality
for kernel attack surface reduction.  For example, a linux container
could maintain a whitelist of pre-existing system calls but drop
all new ones with errnos.  This would keep a logically static attack
surface while providing errnos that may allow for graceful failure
without the downside of do_exit() on a bad call.

This change also changes the signature of __secure_computing.  It
appears the only direct caller is the arm entry code and it clobbers
any possible return value (register) immediately.
Signed-off-by: NWill Drewry <wad@chromium.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NEric Paris <eparis@redhat.com>

v18: - fix up comments and rebase
     - fix bad var name which was fixed in later revs
     - remove _int() and just change the __secure_computing signature
v16-v17: ...
v15: - use audit_seccomp and add a skip label. (eparis@redhat.com)
     - clean up and pad out return codes (indan@nul.nu)
v14: - no change/rebase
v13: - rebase on to 88ebdda6
v12: - move to WARN_ON if filter is NULL
       (oleg@redhat.com, luto@mit.edu, keescook@chromium.org)
     - return immediately for filter==NULL (keescook@chromium.org)
     - change evaluation to only compare the ACTION so that layered
       errnos don't result in the lowest one being returned.
       (keeschook@chromium.org)
v11: - check for NULL filter (keescook@chromium.org)
v10: - change loaders to fn
 v9: - n/a
 v8: - update Kconfig to note new need for syscall_set_return_value.
     - reordered such that TRAP behavior follows on later.
     - made the for loop a little less indent-y
 v7: - introduced
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

[This patch depends on luto@mit.edu's no_new_privs patch:
   https://lkml.org/lkml/2012/1/30/264
 The whole series including Andrew's patches can be found here:
   https://github.com/redpig/linux/tree/seccomp
 Complete diff here:
   https://github.com/redpig/linux/compare/1dc65fed...seccomp
]

This patch adds support for seccomp mode 2.  Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.

A filter program may be installed by calling:
  struct sock_fprog fprog = { ... };
  ...
  prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);

The return value of the filter program determines if the system call is
allowed to proceed or denied.  If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel.  All attached
programs must be evaluated before a system call will be allowed to
proceed.

Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task.  This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).

There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
  arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
  required for system call policy decisions.

Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER.  In this patch, the primary dependency is on
syscall_get_arguments().  The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.

No architectures are enabled in this patch.
Signed-off-by: NWill Drewry <wad@chromium.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: NIndan Zupancic <indan@nul.nu>
Acked-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

v18: - rebase to v3.4-rc2
     - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
     - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
     - add a comment for get_u32 regarding endianness (akpm@)
     - fix other typos, style mistakes (akpm@)
     - added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
     - tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
       size (indan@nul.nu)
     - drop the max insns to 256KB (indan@nul.nu)
     - return ENOMEM if the max insns limit has been hit (indan@nul.nu)
     - move IP checks after args (indan@nul.nu)
     - drop !user_filter check (indan@nul.nu)
     - only allow explicit bpf codes (indan@nul.nu)
     - exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
       (indan@nul.nu,keescook@chromium.org)
     - adds seccomp_chk_filter and drops general bpf_run/chk_filter user
     - add seccomp_bpf_load for use by net/core/filter.c
     - lower max per-process/per-hierarchy: 1MB
     - moved nnp/capability check prior to allocation
       (all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
     - removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
     - reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
     - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
     - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
     - pare down Kconfig doc reference.
     - extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
       (hpa@zytor.com)
     - calling convention is noted in a new u32 field using syscall_get_arch.
       This allows for cross-calling convention tasks to use seccomp filters.
       (hpa@zytor.com)
     - lots of clean up (thanks, Indan!)
 v9: - n/a
 v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
     - Lots of fixes courtesy of indan@nul.nu:
     -- fix up load behavior, compat fixups, and merge alloc code,
     -- renamed pc and dropped __packed, use bool compat.
     -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
        dependencies
 v7:  (massive overhaul thanks to Indan, others)
     - added CONFIG_HAVE_ARCH_SECCOMP_FILTER
     - merged into seccomp.c
     - minimal seccomp_filter.h
     - no config option (part of seccomp)
     - no new prctl
     - doesn't break seccomp on systems without asm/syscall.h
       (works but arg access always fails)
     - dropped seccomp_init_task, extra free functions, ...
     - dropped the no-asm/syscall.h code paths
     - merges with network sk_run_filter and sk_chk_filter
 v6: - fix memory leak on attach compat check failure
     - require no_new_privs || CAP_SYS_ADMIN prior to filter
       installation. (luto@mit.edu)
     - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
     - cleaned up Kconfig (amwang@redhat.com)
     - on block, note if the call was compat (so the # means something)
 v5: - uses syscall_get_arguments
       (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
      - uses union-based arg storage with hi/lo struct to
        handle endianness.  Compromises between the two alternate
        proposals to minimize extra arg shuffling and account for
        endianness assuming userspace uses offsetof().
        (mcgrathr@chromium.org, indan@nul.nu)
      - update Kconfig description
      - add include/seccomp_filter.h and add its installation
      - (naive) on-demand syscall argument loading
      - drop seccomp_t (eparis@redhat.com)
 v4:  - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
      - now uses current->no_new_privs
        (luto@mit.edu,torvalds@linux-foundation.com)
      - assign names to seccomp modes (rdunlap@xenotime.net)
      - fix style issues (rdunlap@xenotime.net)
      - reworded Kconfig entry (rdunlap@xenotime.net)
 v3:  - macros to inline (oleg@redhat.com)
      - init_task behavior fixed (oleg@redhat.com)
      - drop creator entry and extra NULL check (oleg@redhat.com)
      - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
      - adds tentative use of "always_unprivileged" as per
        torvalds@linux-foundation.org and luto@mit.edu
 v2:  - (patch 2 only)
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

ARCH_HAS_NMI_WATCHDOG is a macro defined by arch, but config
HARDLOCKUP_DETECTOR depends on it.  This is wrong, ARCH_HAS_NMI_WATCHDOG
has to be a Kconfig config, and arch's need it should select it
explicitly.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using the "compat" APIs, architectures will generally want to
be able to make direct syscalls to msgsnd(), shmctl(), etc., and
in the kernel we would want them to be handled directly by
compat_sys_xxx() functions, as is true for other compat syscalls.

However, for historical reasons, several of the existing compat IPC
syscalls do not do this.  semctl() expects a pointer to the fourth
argument, instead of the fourth argument itself.  msgsnd(), msgrcv()
and shmat() expect arguments in different order.

This change adds an ARCH_WANT_OLD_COMPAT_IPC config option that can be
set to preserve this behavior for ports that use it (x86, sparc, powerpc,
s390, and mips).  No actual semantics are changed for those architectures,
and there is only a minimal amount of code refactoring in ipc/compat.c.

Newer architectures like tile (and perhaps future architectures such
as arm64 and unicore64) should not select this option, and thus can
avoid having any IPC-specific code at all in their architecture-specific
compat layer.  In the same vein, if this option is not selected, IPC_64
mode is assumed, since that's what the <asm-generic> headers expect.

The workaround code in "tile" for msgsnd() and msgrcv() is removed
with this change; it also fixes the bug that shmat() and semctl() were
not being properly handled.
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]()

So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.

Typical usage scenarios:

        #include <linux/static_key.h>

        struct static_key key = STATIC_KEY_INIT_TRUE;

        if (static_key_false(&key))
                do unlikely code
        else
                do likely code

Or:

        if (static_key_true(&key))
                do likely code
        else
                do unlikely code

The static key is modified via:

        static_key_slow_inc(&key);
        ...
        static_key_slow_dec(&key);

The 'slow' prefix makes it abundantly clear that this is an
expensive operation.

I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.

On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.huSigned-off-by: NIngo Molnar <mingo@elte.hu>

Consolidate the uprobes code under kernel/events/, where the various
core kernel event handling routines live.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Link: http://lkml.kernel.org/n/tip-biuyhhwohxgbp2vzbap5yr8o@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Make the uprobes code readable to me:

 - improve the Kconfig text so that a mere mortal gets some idea
   what CONFIG_UPROBES=y is really about

 - do trivial renames to standardize around the uprobes_*() namespace

 - clean up and simplify various code flow details

 - separate basic blocks of functionality

 - line break artifact and white space related removal

 - use standard local varible definition blocks

 - use vertical spacing to make things more readable

 - remove unnecessary volatile

 - restructure comment blocks to make them more uniform and
   more readable in general

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Add uprobes support to the core kernel, with x86 support.

This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.

General design:

Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.

Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.

Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.

The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list.  On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.

Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.

We use a temporary list to walk through the vmas that map the
inode.

- The number of maps that map the inode, is not known before we
  walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
  size-critical data structure.
- There can be more than one maps of the inode in the same mm.

We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes.  When a vma of interest is mapped,
we insert the breakpoint at the right address.

Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.

This is needed for:

 a. executing the instruction out-of-line (xol).
 b. instruction analysis for any subsequent fixups.
 c. restoring the instruction back when the uprobe is unregistered.

We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).

Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.

The core worker is derived from KSM's replace_page() logic.

In essence, similar to KSM:

 a. allocate a new page and copy over contents of the page that
    has the uprobed vaddr
 b. modify the copy and insert the breakpoint at the required
    address
 c. switch the original page with the copy containing the
    breakpoint
 d. flush page tables.

replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.

Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep.  Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.

A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.

Changelog:

(v10):
 - Add code to clear REX.B prefix as suggested by Denys Vlasenko
   and Masami Hiramatsu.

(v9):
 - Use insn_offset_modrm as suggested by Masami Hiramatsu.

(v7):

 Handle comments from Peter Zijlstra:

 - Dont take reference to inode. (expect inode to uprobe_register to be sane).
 - Use PTR_ERR to set the return value.
 - No need to take reference to inode.
 - use PTR_ERR to return error value.
 - register and uprobe_unregister share code.

(v5):

 - Modified del_consumer as per comments from Peter.
 - Drop reference to inode before dropping reference to uprobe.
 - Use i_size_read(inode) instead of inode->i_size.
 - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
 - Includes errno.h as recommended by Stephen Rothwell to fix a build issue
   on sparc defconfig
 - Remove restrictions while unregistering.
 - Earlier code leaked inode references under some conditions while
   registering/unregistering.
 - Continue the vma-rmap walk even if the intermediate vma doesnt
   meet the requirements.
 - Validate the vma found by find_vma before inserting/removing the
   breakpoint
 - Call del_consumer under mutex_lock.
 - Use hash locks.
 - Handle mremap.
 - Introduce find_least_offset_node() instead of close match logic in
   find_uprobe
 - Uprobes no more depends on MM_OWNER; No reference to task_structs
   while inserting/removing a probe.
 - Uses read_mapping_page instead of grab_cache_page so that the pages
   have valid content.
 - pass NULL to get_user_pages for the task parameter.
 - call SetPageUptodate on the new page allocated in write_opcode.
 - fix leaking a reference to the new page under certain conditions.
 - Include Instruction Decoder if Uprobes gets defined.
 - Remove const attributes for instruction prefix arrays.
 - Uses mm_context to know if the application is 32 bit.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: NJim Keniston <jkenisto@us.ibm.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move CMPXCHG_DOUBLE and rename it to HAVE_CMPXCHG_DOUBLE so architectures
can simply select the option if it is supported.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move CMPXCHG_LOCAL and rename it to HAVE_CMPXCHG_LOCAL so architectures
can simply select the option if it is supported.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While implementing cmpxchg_double() on s390 I realized that we don't set
CONFIG_CMPXCHG_LOCAL despite the fact that we have support for it.

However setting that option will increase the size of struct page by
eight bytes on 64 bit, which we certainly do not want.  Also, it doesn't
make sense that a present cpu feature should increase the size of struct
page.

Besides that it looks like the dependency to CMPXCHG_LOCAL is wrong and
that it should depend on CMPXCHG_DOUBLE instead.

This patch:

If an architecture supports CMPXCHG_LOCAL this shouldn't result
automatically in larger struct pages if the SLUB allocator is used.
Instead introduce a new config option "HAVE_ALIGNED_STRUCT_PAGE" which
can be selected if a double word aligned struct page is required.  Also
update x86 Kconfig so that it should work as before.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The legacy x86 nmi watchdog code was removed with the implementation
of the perf based nmi watchdog. This broke Oprofile's nmi timer
mode. To run nmi timer mode we relied on a continuous ticking nmi
source which the nmi watchdog provided. The nmi tick was no longer
available and current watchdog can not be used anymore since it runs
with very long periods in the range of seconds. This patch
reimplements the nmi timer mode using a perf counter nmi source.

V2:
* removing pr_info()
* fix undefined reference to `__udivdi3' for 32 bit build
* fix section mismatch of .cpuinit.data:nmi_timer_cpu_nb
* removed nmi timer setup in arch/x86
* implemented function stubs for op_nmi_init/exit()
* made code more readable in oprofile_init()

V3:
* fix architectural initialization in oprofile_init()
* fix CONFIG_OPROFILE_NMI_TIMER dependencies
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NRobert Richter <robert.richter@amd.com>