With the previous patches removing the need for legacy IRQs
now that all of mach-omap2 is booting in device tree only mode,
we can drop struct omap_hwmod_irq_info.

Note that we can now also finally drop omap4_xlate_irq.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

When removing legacy platform data for IO ranges for the hwmod
interconnect code, we still need to support the "ti,hwmods"
property.

And as we're going to use a generic sysc device driver to handle the
interconnect target instances, we can parse the information needed
for legacy "ti,hwmods" IO range from the dts. It's always the first
range the interconnect target module provides.

Note that we want to parse the range instead of the first child
device IO regs as the child device may not always be defined.

The child IP device node may not exist in cases where there is no
driver binding for the device, or when the child IP block may not
even be functional for some SoC revisions. But the IO range of the
interconnect target module is always known.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is no longer used as we boot in device tree
only mode.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

We are currently overwiting the hwmod clkctrl registers if we
configure a clock ctrl clock from device tree.

While this does not expose any bugs except for kernel coders
when debugging things, it should be fixed for correctness.
It is now impossible to use the hwmod data for checking the
clkctrl register values after booting for debugging or
generating dts data from hwmod data.

Let's fix the issue by adding a helper to detect if clkctrl
clock is configured.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Introduce HWMOD_CLKDM_NOAUTO flag that allows the hwmod's
clockdomain to be prevented from HW_AUTO while the hwmod is active.

This is needed to workaround some modules which don't function
correctly with HW_AUTO. e.g. DCAN on DRA7.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
[nsekhar@ti.com: rebased to v4.9 kernel]
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

'flags' member of omap_hwmod structure is fast running
out of space with 16 different flags already defined.

Make flags a 32-bit entity so as to allow for more flags.

This results is a ~2.3K data section size increase with
omap2plus_defconfig on v4.11-rc2.

before:
   text	   data	    bss	    dec	    hex	filename
8186930	3082444	8252992	19522366	129e33e	vmlinux

after:
   text	   data	    bss	    dec	    hex	filename
8186922	3084812	8252992	19524726	129ec76	vmlinux
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be const, and will need to be const when we start initializing
it from clkdm data.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is not used so let's remove it.
Signed-off-by: NTony Lindgren <tony@atomide.com>

We want to be able to dynamically allocate struct omap_hwmod_ocp_if and
struct omap_hwmod at device driver probe time based on .dts data.

Current setup with the linkspace using memblock_virt_alloc() makes
this tricky, so let's get rid of struct linkspace and directly set up
struct omap_hwmod_ocp_if as the master and slave lists.

As we are currently not using the master_ports either, let's remove it
too. And let's add the struct omap_hwmod_ocp_if node directly to the
slave_ports list.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Nearly all modules on OMAP4 and newer platforms have clkctrl offsets
that are non-zero except for the RTC on am335x. Because we rely on a
clkctrl_offset of zero to indicate no clkctrl_offset being present,
lets add a HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to use to indicate
hwmods that have a valid clkctrl_offset of 0.
Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

RTC IP have kicker feature which prevents spurious writes to its registers.
In order to write into any of the RTC registers, KICK values has to be
written to KICK registers. Also, RTC busy flag needs to be polled for
non-TC registers as well, without which update is not proper and confirmed
it by testing on DRA7-evm.
Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
KICK registers inorder to lock and unlock RTC registers.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
[paul@pwsan.com: fixed subject line]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: NRoger Quadros <rogerq@ti.com>
Tested-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Some module needs more than one functional clock in order to be accessible,
like the McASPs found in DRA7xx family.
This flag will indicate that the opt_clks need to be handled at the same
time as the main_clk for the given hwmod, ensuring that all needed clocks
are enabled before we try to access the module's address space.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Let's add minimal set of dm814x hwmods to have a bootable system.

Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Some IP blocks like RTC, needs an additional setting for writing to its
registers. This is to prevent any spurious writes from changing the
register values.

This patch adds optional lock and unlock function pointers to
the IP block's hwmod data. These unlock and lock function pointers
are called by hwmod code before and after writing sysconfig registers.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
[paul@pwsan.com: fixed indentation level to conform with the rest of the
 structure members]
Reviewed-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

We support decoding the bootloader values if DEBUG is defined.
But we also need to change the struct omap_hwmod flags to have
HWMOD_INIT_NO_RESET to avoid the GPMC being reset during the
boot. Otherwise just the default timings will be displayed
instead of the bootloader configured timings.

This also allows us to clean up the various GPMC related
hwmod flags. For debugging, we only need HWMOD_INIT_NO_RESET,
and HWMOD_INIT_NO_IDLE is not needed.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add struct lock_class_key to omap_hwmod struct and use it to set unique
lockdep class per hwmod.
This will ensure that lockdep will know that each omap_hwmod->_lock should
be treated as separate class and will not give false warning about deadlock
or other issues due to nested use of hwmods.
DRA7x's ATL hwmod is one example for this since McASP can select ATL clock
as functional clock, which will trigger nested oh->_lock usage. This will
trigger false warning from lockdep validator as it is dealing with classes
and for it all hwmod clocks are the same class.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add minimal hwmod support that works at least on dm8168. This
is based on the code in the earlier TI CDP tree, and an earlier
patch by Aida Mynzhasova <aida.mynzhasova@skitlab.ru>.

I've set up things to work pretty much the same way as for
am33xx. We are basically using cm33xx.c with a different set
of clocks and clockdomains.

This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches
published at:

http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html

Cc: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 9a1091ef ("irqchip: gic: Support hierarchy irq domain")
changed the GIC driver to use a non-legacy IRQ domain on DT
platforms. This patch assumes that DT-driven systems are getting
all of their interrupts from device tree.

Turns out that OMAP has quite a few hidden gems, and still uses
hardcoded interrupts despite having fairly complete DTs.

This patch attempts to work around these by offering a translation
method that can be called directly from the hwmod code, if present.
The same hack is sprinkled over PRCM and TWL.

It isn't pretty, but it seems to do the job without having to add
more hacks to the interrupt controller code.

Tested on OMAP4 (Panda-ES) and OMAP5 (UEVM5432).
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NNishanth Menon <nm@ti.com>
[tony@atomide.com: updated to fix make randconfig issue]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Removes some functions that are not used anywhere:
omap_hwmod_pad_route_irq() omap_hwmod_no_setup_reset()
omap_hwmod_read_hardreset() omap_hwmod_del_initiator_dep()
omap_hwmod_enable_clocks() omap_hwmod_reset() omap_hwmod_ocp_barrier()
omap_hwmod_disable_clocks() omap_hwmod_add_initiator_dep()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add parent_hwmod pointer to omap_hwmod. This can be set to point to a
"parent" hwmod that needs to be enabled for the "child" hwmod to work.

This is used at hwmod setup time: when doing the initial setup and
reset, first enable the parent hwmod, and after setup and reset is done,
restore the parent hwmod to postsetup_state.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NArchit Taneja <archit.taneja@gmail.com>
[paul@pwsan.com: add kerneldoc documentation for parent_hwmod; note that it
 is a temporary workaround]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Commit cc824534 ("ARM: OMAP2+: hwmod: Rearm wake-up interrupts
for DT when MUSB is idled") fixed issues with hung UART wake-up
events by calling _reconfigure_io_chain() when MUSB is connected
or disconnected.

As pointed out by Paul Walmsley, we may need to also call
_reconfigure_io_chain() in other cases, so it should be a separate
flag. Let's add HWMOD_RECONFIG_IO_CHAIN as suggested by Paul.
Reviewed-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add hwmod support for IP's that are present in AM43x, but not in AM335x.
AM43x additional ones added here are,
1. synctimer
2. timer8-11
3. ehrpwm3-5
4. spi2-4
5. gpio4-5

AM43x pruss interconnect which is different as compared to AM335x, has
been taken care.

And register offsets for same hwmod's shared with AM335x is different,
AM43x register offsets are updated appropriately.

ocp clock of those in l4_wkup is fed from "sys_clkin_ck" instead of
"dpll_core_m4_div2_ck", so "ocpif" for those in AM43x l4_wkup has been
added seperately.

hwmod's has been added for those that have main clock (wkup_m3, control,
gpio0) and clock domain (l4_hs) different from AM335x. debugss and
adc_tsc that have different clocks and clockdomains repectively has not
been added due to the reasons mentioned below.

AM43x also has IP's like qspi, hdq1w, vpfe, des, rng, usb, dss, debugss,
adc_tsc. These are not handled here due to both/either of following
reasons,
1. To avoid churn; most of them don't have DT bindings, which would
   necessitate adding address space in hwmod, which any way would have
   to be removed once DT bindings happen with driver support.
2. patches would come in from sources other than the author
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Adding the hwmod data for DRA7XX platforms.
Signed-off-by: NAmbresh K <ambresh@ti.com>
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Address space is being removed from hwmod database and DT information
in <reg> property is being used. Currently the 0th index of device
address space is used to map for register target address. This is not
always true, eg. cpgmac has it's sysconfig in second address space.

Handle it by specifying index of device address space to be used for
register target. As default value of this field would be zero with
static initialization, existing behaviour of using first address space
for register target while using DT would be kept as such.
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Tested-by: NMugunthan V N <mugunthanvnm@ti.com>
[paul@pwsan.com: use u8 rather than int to save memory]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

With commit '82702ea1' "ARM: OMAP2+:
Fix serial init for device tree based booting" stubbing out
omap_serial_early_init() for Device tree based booting, there was a
crash observed on AM335x based devices when hwmod does a
_setup_reset() early at boot.

This was rootcaused to hwmod trying to reset console uart while
earlycon was using it.  The way to tell hwmod not to do this is to
specify the HWMOD_INIT_NO_RESET flag, which were infact set by the
omap_serial_early_init() function by parsing the cmdline to identify
the console device.

Parsing the cmdline to identify the uart used by earlycon itself seems
broken as there is nothing preventing earlycon to use a different one.

This patch, instead, attempts to populate the requiste flags for hwmod
based on the CONFIG_DEBUG_OMAPxUARTy FLAGS. This gets rid of the need
for cmdline parsing in the DT as well as non-DT cases to identify the
uart used by earlycon.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Reported-by: NMark Jackson <mpfj-list@newflow.co.uk>
Reported-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NMark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Adding the hwmod data for OMAP54xx SOCs.

Additional changes done on top of initial SOC data files.
- The IO resource information like dma request lines, irq number and
ocp address space can be populated via dt blob. So such data is stripped
from OMAP5 SOC hwmod data file.

- SDMA IO resource information is still kept since dmaengine work
is till ongoing. Once the legacy dma platform driver becomes obsolete,
SDMA io space information can be removed.

- The devices like dss, aess, usb which are missing the device tree bindings,
hwmod data is not added since OMAP5 is DT only build. When such devices add
the dt bindings, respective hwmod data can be added along with it.

With above update, we now need about ~2000 loc vs ~6000 loc with previous
version of the patch for OMAP5 hwmod data file. Ofcourse with addition of
few more drivers it can go upto ~2400 loc which is still better than the
earlier version.
Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

With the OMAP serial driver sysc cleanup patches in this series, we can
now remove the hwmod external apis for sysc fiddling.

While at this, also remove unused sysc auto idle api from hwmod code.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NRajendra nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Some IPs (like UART) need the sidle mode to be controlled in SW only
while they are active. Once they go inactive, they need the IP to be
put back in HW control so they are also wakeup capable.

The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle
mode to be *always* controlled in SWSUP. We now have a need to control
IPs sidle mode in SWSUP only while its active.

So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework
know about these new IP requirements.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

_HWMOD_WAKEUP_ENABLED is currently unused across the hwmod
framework. Just get rid of it, so we have one less flag to
worry about.
Tested-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

For some unknown reason, allowing hwmod to control MIDLEMODE causes
core_pwrdm to not hit idle states for musb in DM3730 at least.
I've verified that setting any MIDLEMODE value other than "force
standby" before enabling the device causes subsequent suspend
attempts to fail with core_pwrdm not entering idle states, even
if the driver is unloaded and "force standby" is restored before
suspend attempt. To recover from this, soft reset can be used, but
that's not suitable solution for suspend.

Keeping the register set at force standby (reset value) makes it work
and device still functions properly, as musb has driver-controlled
OTG_FORCESTDBY register that controls MSTANDBY signal.
Note that TI PSP kernels also have similar workarounds.

This patch also fixes HWMOD_SWSUP_MSTANDBY documentation to match the
actual flag name.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Enable the AESS auto-gating control bit during AESS hwmod setup.  This
fixes the following boot warning on OMAP4:

omap_hwmod: aess: _wait_target_disable failed

Without this patch, the AESS IP block does not indicate to the PRCM
that it is idle after it is reset.  This prevents some types of SoC
power management until something sets the auto-gating control bit.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NSebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>

After setup/enable, some IP blocks need some additional setting to
indicate the PRCM that they are inactive until they are configured.
Some examples on OMAP4 include the AESS and FSUSB IP blocks.

To fix this cleanly, this patch adds another optional function
pointer, enable_preprogram, to the IP block's hwmod data.  The function
that is pointed to is called by the hwmod code immediately after the
IP block is reset.

This version of the patch includes a patch description fix from Felipe.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NSebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Felipe Balbi <balbi@ti.com>

Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active.  It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active.  It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add flags parameter for omap_hwmod_count_resources() so users can tell which
type of resources they are interested when counting them in hwmod database.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NBenoît Cousson <b-cousson@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

OMAP4 has module specific context lost registers which makes it now
possible to have module level context loss count, instead of relying
on the powerdomain level context count.

Add 2 private hwmod api's to update/clear the hwmod/module specific
context lost counters/register.

Update the module specific context_lost_counter and clear the hardware
bits just after enabling the module.

omap_hwmod_get_context_loss_count() now returns the hwmod context loss
count them on platforms where they exist (OMAP4), else fall back on
the pwrdm level counters for older platforms.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: added function kerneldoc, fixed structure kerneldoc,
 rearranged structure to avoid memory waste, marked fns as OMAP4-specific,
 prevent fn entry on non-OMAP4 chips, reduced indentation, merged update
 and clear, merged patches]
[t-kristo@ti.com: added support for arch specific hwmod ops, and changed
 the no context offset indicator to USHRT_MAX]
Signed-off-by: NTero Kristo <t-kristo@ti.com>
[paul@pwsan.com: use NO_CONTEXT_LOSS_BIT flag rather than USHRT_MAX;
 convert unsigned context lost counter to int to match the return type;
 get rid of hwmod_ops in favor of the existing soc_ops mechanism;
 move context loss low-level accesses to the PRM code]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

We want to remove plat/cpu.h. To do this, let's first split
it to private soc.h to mach-omap1 and mach-omap2. We have to
keep plat/cpu.h around until the remaining drivers are fixed,
so let's include the local soc.h in plat/cpu.h and for drivers
still including plat/cpu.h.

Once the drivers are fixed not to include plat/cpu.h, we
can remove the file.

This is needed for the ARM common zImage support.

[tony@atomide.com: updated to not print a warning]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.
Signed-off-by: NTony Lindgren <tony@atomide.com>

On OMAP4 most modules/hwmods support module level context status. On
OMAP3 and earlier, we relied on the power domain level context status.
Identify all modules that don't support 'context_offs' by adding a
flag bit, HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT.  Rest have a valid
'context_offs' populated in .prcm structure already.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
[paul@pwsan.com: add flag bit rather than overloading .context_offs;
 update changelog message]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>