- 27 2月, 2012 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
When using a multi-ISU MPIC, we can interrupts up to isu_size * MPIC_MAX_ISU, not just isu_size, so allocate the right size reverse map. Without this, the code will constantly fallback to a linear search. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
1) ICMP sockets leave err uninitialized but we try to return it for the unsupported MSG_OOB case, reported by Dave Jones. 2) Add new Zaurus device ID entries, from Dave Jones. 3) Pointer calculation in hso driver memset is wrong, from Dan Carpenter. 4) ks8851_probe() checks unsigned value as negative, fix also from Dan Carpenter. 5) Fix crashes in atl1c driver due to TX queue handling, from Eric Dumazet. I anticipate some TX side locking fixes coming in the near future for this driver as well. 6) The inline directive fix in Bluetooth which was breaking the build only with very new versions of GCC, from Johan Hedberg. 7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge window, reported by Meelis Roos and fixed by Eric Dumazet. 8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng. 9) Some ip6_route_output() callers test the return value for NULL, but this never happens as the convention is to return a dst entry with dst->error set. Fixes from RonQing Li. 10) Logitech Harmony 900 should be handled by zaurus driver not cdc_ether, update white lists and black lists accordingly. From Scott Talbert. 11) Receiving from certain kinds of devices there won't be a MAC header, so there is no MAC header to fixup in the IPSEC code, and if we try to do it we'll crash. Fix from Eric Dumazet. 12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny Petrilin. 13) Fix regression in link-down handling in davinci_emac which causes all RX descriptors to be freed up and therefore RX to wedge completely, from Christian Riesch. 14) It took two attempts, but ctnetlink soft lockups seem to be cured now, from Pablo Neira Ayuso. 15) Endianness bug fix in ENIC driver, from Santosh Nayak. 16) The long ago conversion of the PPP fragmentation code over to abstracted SKB list handling wasn't perfect, once we get an out of sequence SKB we don't flush the rest of them like we should. From Ben McKeegan. 17) Fix regression of ->ip_summed initialization in sfc driver. From Ben Hutchings. 18) Bluetooth timeout mistakenly using msecs instead of jiffies, from Andrzej Kaczmarek. 19) Using _sync variant of work cancellation results in deadlocks, use the non _sync variants instead. From Andre Guedes. 20) Bluetooth rfcomm code had reference counting problems leading to crashes, fix from Octavian Purdila. 21) The conversion of netem over to classful qdisc handling added two bugs to netem_dequeue(), fixes from Eric Dumazet. 22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall. 23) b44_pci_exit() should not have __exit tag since it's invoked from non-__exit code. From Nikola Pajkovsky. 24) The conversion of the neighbour hash tables over to RCU added a race, fixed here by adding the necessary reread of tbl->nht, fix from Michel Machado. 25) When we added VF (virtual function) attributes for network device dumps, this potentially bloats up the size of the dump of one network device such that the dump size is too large for the buffer allocated by properly written netlink applications. In particular, if you add 255 VFs to a network device, parts of GLIBC stop working. To fix this, we add an attribute that is used to turn on these extended portions of the network device dump. Sophisticaed applications like 'ip' that want to see this stuff will be changed to set the attribute, whereas things like GLIBC that don't care about VFs simply will not, and therefore won't be busted by the mere presence of VFs on a network device. Thanks to the tireless work of Greg Rose on this fix. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) sfc: Fix assignment of ip_summed for pre-allocated skbs ppp: fix 'ppp_mp_reconstruct bad seq' errors enic: Fix endianness bug. gre: fix spelling in comments netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2) Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries" davinci_emac: Do not free all rx dma descriptors during init mlx4_core: Fixing array indexes when setting port types phy: IC+101G and PHY_HAS_INTERRUPT flag netdev/phy/icplus: Correct broken phy_init code ipsec: be careful of non existing mac headers Move Logitech Harmony 900 from cdc_ether to zaurus hso: memsetting wrong data in hso_get_count() netfilter: ip6_route_output() never returns NULL. ethernet/broadcom: ip6_route_output() never returns NULL. ipv6: ip6_route_output() never returns NULL. jme: Fix FIFO flush issue atm: clip: remove clip_tbl ipv4: ping: Fix recvmsg MSG_OOB error handling. rtnetlink: Fix problem with buffer allocation ...
-
由 Linus Torvalds 提交于
The autofs compat handling fix caused a compile failure when CONFIG_COMPAT isn't defined. Instead of adding random #ifdef'fery in autofs, let's just make the compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task() just hardcodes to zero. We could probably do something similar for a number of other cases where we have #ifdef's in code, but this is the low-hanging fruit. Reported-and-tested-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2012 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Couple of minor driver fixes. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max34440) Fix resetting temperature history hwmon: (f75375s) Fix register write order when setting fans to full speed hwmon: (ads1015) Fix file leak in probe function hwmon: (max6639) Fix PPR register initialization to set both channels hwmon: (max6639) Fix FAN_FROM_REG calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
three kbuild fixes for 3.3: - make deb-pkg symlink race fix. - make coccicheck fix. - Dropping the check for modutils. This is not a regression, but allows the module-init-tools replacement kmod work with the 3.3 kernel. * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: coccicheck: change handling of C={1,2} when M= is set builddeb: Don't create files in /tmp with predictable names kbuild: do not check for ancient modutils tools
-
由 Ian Kent 提交于
When the autofs protocol version 5 packet type was added in commit 5c0a32fc ("autofs4: add new packet type for v5 communications"), it obvously tried quite hard to be word-size agnostic, and uses explicitly sized fields that are all correctly aligned. However, with the final "char name[NAME_MAX+1]" array at the end, the actual size of the structure ends up being not very well defined: because the struct isn't marked 'packed', doing a "sizeof()" on it will align the size of the struct up to the biggest alignment of the members it has. And despite all the members being the same, the alignment of them is different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte alignment on x86-64. And while 'NAME_MAX+1' ends up being a nice round number (256), the name[] array starts out a 4-byte aligned. End result: the "packed" size of the structure is 300 bytes: 4-byte, but not 8-byte aligned. As a result, despite all the fields being in the same place on all architectures, sizeof() will round up that size to 304 bytes on architectures that have 8-byte alignment for u64. Note that this is *not* a problem for 32-bit compat mode on POWER, since there __u64 is 8-byte aligned even in 32-bit mode. But on x86, 32-bit and 64-bit alignment is different for 64-bit entities, and as a result the structure that has exactly the same layout has different sizes. So on x86-64, but no other architecture, we will just subtract 4 from the size of the structure when running in a compat task. That way we will write the properly sized packet that user mode expects. Not pretty. Sadly, this very subtle, and unnecessary, size difference has been encoded in user space that wants to read packets of *exactly* the right size, and will refuse to touch anything else. Reported-and-tested-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 2月, 2012 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
-
由 Ben Hutchings 提交于
When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
SCSI fixes on 20120224: "This is a set of assorted bug fixes for power management, mpt2sas, ipr, the rdac device handler and quite a big chunk for qla2xxx (plus a use after free of scsi_host in scsi_scan.c). " * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_dh_rdac: Fix for unbalanced reference count [SCSI] scsi_pm: Fix bug in the SCSI power management handler [SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost' [SCSI] qla2xxx: Update version number to 8.03.07.13-k. [SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx. [SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx. [SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle. [SCSI] qla2xxx: Remove check for null fcport from host reset handler. [SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. [SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing. [SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command. [SCSI] qla2xxx: Add an "is reset active" helper. [SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. [SCSI] qla2xxx: Propagate up abort failures. [SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded [SCSI] ipr: fix eeh recovery for 64-bit adapters [SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
-
由 Ben McKeegan 提交于
This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: NBen McKeegan <ben@netservers.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Nayak 提交于
Sparse complaints the endian bug. Signed-off-by: NSantosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Dietsche 提交于
This patch reverts a portion of d0bc1fb4 so that coccicheck will work properly when C=1 or C=2. Reported-and-tested-by: NBrice Goglin <Brice.Goglin@inria.fr> Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
-
由 stephen hemminger 提交于
The original spelling and bad word choice makes these comments hard to read. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] hdpvr: update picture controls to support firmware versions > 0.15 [media] wl128x: fix build errors when GPIOLIB is not enabled [media] hdpvr: fix race conditon during start of streaming [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes [media] imon: don't wedge hardware after early callbacks
-
由 Oleg Nesterov 提交于
signalfd_cleanup() ensures that ->signalfd_wqh is not used, but this is not enough. eppoll_entry->whead still points to the memory we are going to free, ep_unregister_pollwait()->remove_wait_queue() is obviously unsafe. Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL, change ep_unregister_pollwait() to check pwq->whead != NULL under rcu_read_lock() before remove_wait_queue(). We add the new helper, ep_remove_wait_queue(), for this. This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because ->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand. ep_unregister_pollwait()->remove_wait_queue() can play with already freed and potentially reused ->sighand, but this is fine. This memory must have the valid ->signalfd_wqh until rcu_read_unlock(). Reported-by: NMaxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by: NMaxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Quoth Chris: "This is later than I wanted because I got backed up running through btrfs bugs from the Oracle QA teams. But they are all bug fixes that we've queued and tested since rc1. Nothing in particular stands out, this just reflects bug fixing and QA done in parallel by all the btrfs developers. The most user visible of these is: Btrfs: clear the extent uptodate bits during parent transid failures Because that helps deal with out of date drives (say an iscsi disk that has gone away and come back). The old code wasn't always properly retrying the other mirror for this type of failure." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: fix compiler warnings on 32 bit systems Btrfs: increase the global block reserve estimates Btrfs: clear the extent uptodate bits during parent transid failures Btrfs: add extra sanity checks on the path names in btrfs_mksubvol Btrfs: make sure we update latest_bdev Btrfs: improve error handling for btrfs_insert_dir_item callers Btrfs: be less strict on finding next node in clear_extent_bit Btrfs: fix a bug on overcommit stuff Btrfs: kick out redundant stuff in convert_extent_bit Btrfs: skip states when they does not contain bits to clear Btrfs: check return value of lookup_extent_mapping() correctly Btrfs: fix deadlock on page lock when doing auto-defragment Btrfs: fix return value check of extent_io_ops btrfs: honor umask when creating subvol root btrfs: silence warning in raid array setup btrfs: fix structs where bitfields and spinlock/atomic share 8B word btrfs: delalloc for page dirtied out-of-band in fixup worker Btrfs: fix memory leak in load_free_space_cache() btrfs: don't check DUP chunks twice Btrfs: fix trim 0 bytes after a device delete ...
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
This is the arch/c6x part of commit 7c431851 ("Kbuild: Use dtc's -d (dependency) option") which was dropped because c6x had not yet been merged at the time. * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: Kbuild: Use dtc's -d (dependency) option
-
由 Kyle McMartin 提交于
I don't even live in the same country as any of my PA-RISC hardware these days, so the odds of me touching the code are pretty low. (Also re-order things to ensure jejb gets CC'd since he's been the primary maintainer for the last few years.) Signed-off-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Don't clear vm_mm in a deleted VMA as it's unnecessary and might conceivably break the filesystem or driver VMA close routine. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Lock i_mmap_mutex for access to the VMA prio list to prevent concurrent access. Currently, certain parts of the mmap handling are protected by the region mutex, but not all. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/pmundt/linux-sh由 Linus Torvalds 提交于
SH/R-Mobile fixes for 3.3-rc5 * tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice ARM: mach-shmobile: r8a7779 PFC IPSR4 fix ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support arm: fix compile failure in mach-shmobile/board-ag5evm.c ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd ARM: mach-shmobile: simplify MMCIF DMA configuration ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix ARM: mach-shmobile: sh73a0 PINT IRQ base fix
-
git://github.com/pmundt/linux-sh由 Linus Torvalds 提交于
SuperH fixes for 3.3-rc5 * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr arch/sh: remove references to cpu_*_map. sh: Fix typo in pci-sh7780.c sh: add platform_device for SPI1 in setup-sh7757 sh: modify resource for SPI0 in setup-sh7757 sh: se7724: fix compile breakage sh: clkfwk: bugfix: use clk_reparent() for div6 clocks sh: clock-sh7724: fixup sh_fsi clock settings sh: sh7757lcr: update to the new MMCIF DMA configuration sh: fix the sh_mmcif_plat_data in board-sh7757lcr video: pvr2fb: Fix up spurious section mismatch warnings. sh: Defer to asm-generic/device.h.
-
由 Anton Vorontsov 提交于
There is an issue when memcg unregisters events that were attached to the same eventfd: - On the first call mem_cgroup_usage_unregister_event() removes all events attached to a given eventfd, and if there were no events left, thresholds->primary would become NULL; - Since there were several events registered, cgroups core will call mem_cgroup_usage_unregister_event() again, but now kernel will oops, as the function doesn't expect that threshold->primary may be NULL. That's a good question whether mem_cgroup_usage_unregister_event() should actually remove all events in one go, but nowadays it can't do any better as cftype->unregister_event callback doesn't pass any private event-associated cookie. So, let's fix the issue by simply checking for threshold->primary. FWIW, w/o the patch the following oops may be observed: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs RIP: 0010:[<ffffffff810be32c>] [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 RSP: 0018:ffff88001d0b9d60 EFLAGS: 00010246 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0) Call Trace: [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60 [<ffffffff8103db94>] process_one_work+0x174/0x450 [<ffffffff8103e413>] worker_thread+0x123/0x2d0 Cc: stable <stable@vger.kernel.org> Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
Temperature history is reset by writing 0x8000 into the peak temperature register, not 0xffff. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NJean Delvare <khali@linux-fr.org>
-
- 24 2月, 2012 11 次提交
-
-
由 Chris Mason 提交于
The enospc tracing code added some interesting uses of u64 pointer casts. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Jozsef Kadlecsik 提交于
Marcell Zambo and Janos Farago noticed and reported that when new conntrack entries are added via netlink and the conntrack table gets full, soft lockup happens. This is because the nf_conntrack_lock is held while nf_conntrack_alloc is called, which is in turn wants to lock nf_conntrack_lock while evicting entries from the full table. The patch fixes the soft lockup with limiting the holding of the nf_conntrack_lock to the minimum, where it's absolutely required. It required to extend (and thus change) nf_conntrack_hash_insert so that it makes sure conntrack and ctnetlink do not add the same entry twice to the conntrack table. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This reverts commit af14cca1. This patch contains a race condition between packets and ctnetlink in the conntrack addition. A new patch to fix this issue follows up. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Christian Riesch 提交于
This patch fixes a regression that was introduced by commit 0a5f3846 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f3846 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Cc: <stable@vger.kernel.org> Cc: Hegde, Vinay <vinay.hegde@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: NRajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h' twice, remove the duplicate. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Fix the bit field width information for the IPSR4 register in the r8a7779 pin function controller (PFC). Without this fix the Marzen board fails to receive data over the serial console due to misconfigured pin function for the RX pin. Signed-off-by: NMagnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Convert the sh73a0 SMP code to use 32-bit PSTR access. This fixes wakeup from deep sleep for sh73a0 secondary CPUs. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Phil Edworthy 提交于
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Shimoda, Yoshihiro 提交于
The latest sh_eth driver needs a resource of TSU in the channel 1, if the controller has TSU registers. So, this patch adds the resource. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-