Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  APPARMOR: Fix memory leak of apparmor_init()
  APPARMOR: Fix memory leak of alloc_namespace()

* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux:
  locks: remove dead lease error-handling code
  locks: fix leak on merging leases
  nfsd4: fix 4.1 connection registration race

kobject_put is called from padata_free for the padata kobject.
The kobject's release function frees the padata instance,
so don't call kobject_put for the padata kobject from pcrypt.
Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the MacBookAir3,1 and MacBookAir3,2 to the mbp-nvidia-bl
driver.
Signed-off-by: NEdgar (gimli) Hucek <gimli@dark-green.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle return value, strict_strtoul is declared with attribute
warn_unused_result.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This affects the get/set of the current Ambient Light Zone.  Reading
should return an integer between 1..3 (1 = Daylight, 2 = office, 3 =
dark).  Writing a value between 1..3 forces the backlight controller to
enter the corresponding Ambient Light Zone.  Writing 0 returns to normal
operation.

Fix valid range checking so we don't write invalid values to the
controller, and make sure we subtract 1, since this is what the register
definition (CFGR:BLV) requires.  Otherwise the values written don't work
correctly.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The intensity of the backlight can be varied from a range of
max_brightness to zero.  Though most, if not all the pwm based backlight
devices start flickering at lower brightness value.  And also for each
device there exists a brightness value below which the backlight appears
to be turned off though the value is not equal to zero.

If the range of brightness for a device is from zero to max_brightness.  A
graph is plotted for brightness Vs intensity for the pwm based backlight
device has to be a linear graph.

intensity
	  |   /
	  |  /
	  | /
	  |/
	  ---------
	 0	max_brightness

But pratically on measuring the above we note that the intensity of
backlight goes to zero(OFF) when the value in not zero almost nearing to
zero(some x%).  so the graph looks like

intensity
	  |    /
	  |   /
	  |  /
	  |  |
	  ------------
	 0   x	 max_brightness

In order to overcome this drawback knowing this x% i.e nothing but the low
threshold beyond which the backlight is off and will have no effect, the
brightness value is being offset by the low threshold value(retaining the
linearity of the graph).  Now the graph becomes

intensity
	  |     /
	  |    /
	  |   /
	  |  /
	  -------------
	   0	  max_brightness

With this for each and every digit increment in the brightness from zero
there is a change in the intensity of backlight.  Devices having this
behaviour can set the low threshold brightness(lth_brightness) and pass
the same as platform data else can have it as zero.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NArun Murthy <arun.murthy@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate section mismatch warning by marking s6e63m0_probe() as __devinit.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/s6e63m0.c: unregister backlight device and remove sysfs attribute file in s6e63m0_remove

s6e63m0_probe() registered backlight device and create sysfs attribute
files, thus s6e63m0_remove() should unregister backlight device and remove
sysfs attribute files.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gamma_table is not writable, so set permissions to 0444.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM,
CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus
value when initializing the module.
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create sub directory Documentation/leds and add short documentation for
LP5521 and LP5523 drivers.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide configuration and compilation support for LP5521 and LP5523
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LP5523 chip is nine channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset provides support for LP5521 and LP5523 LED driver chips from
National Semicondutor.  Both drivers supports programmable engines and
naturally LED class features.

Documentation is provided as a part of the patchset.  I created "leds"
subdirectory under Documentation.  Perhaps the rest of the leds*
documentation should be moved there.

Datasheets are freely available at National Semiconductor www pages.

This patch:

LP5521 chip is three channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARN_ONCE is a bit strong for a deprecation warning, given that it spews a
huge backtrace.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Salman Qazi describes the following radix-tree bug:

In the following case, we get can get a deadlock:

0.  The radix tree contains two items, one has the index 0.
1.  The reader (in this case find_get_pages) takes the rcu_read_lock.
2.  The reader acquires slot(s) for item(s) including the index 0 item.
3.  The non-zero index item is deleted, and as a consequence the other item is
    moved to the root of the tree. The place where it used to be is queued for
    deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
    the rcu-delayed indirect node.
4.  The reader looks at the index 0 slot, and finds that the page has 0 ref
    count
5.  The reader looks at it again, hoping that the item will either be freed or
    the ref count will increase. This never happens, as the slot it is looking
    at will never be updated. Also, this slot can never be reclaimed because
    the reader is holding rcu_read_lock and is in an infinite loop.

The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Reported-by: NSalman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel syslog contains debugging information that is often useful
during exploitation of other vulnerabilities, such as kernel heap
addresses.  Rather than futilely attempt to sanitize hundreds (or
thousands) of printk statements and simultaneously cripple useful
debugging functionality, it is far simpler to create an option that
prevents unprivileged users from reading the syslog.

This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the
dmesg_restrict sysctl.  When set to "0", the default, no restrictions are
enforced.  When set to "1", only users with CAP_SYS_ADMIN can read the
kernel syslog via dmesg(8) or other mechanisms.

[akpm@linux-foundation.org: explain the config option in kernel.txt]
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NEugene Teo <eugeneteo@kernel.org>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/pid/oom_adj was deprecated in August 2010 with the introduction of
the new oom killer heuristic.

This patch copies the Documentation/feature-removal-schedule.txt entry for
this tunable to the Documentation/ABI/obsolete directory so nobody misses
it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nr_dirty and nr_congested are increased only when the page is dirty.  So
if all pages are clean, both them will be zero.  In this case, we should
not mark the zone congested.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Per task latencytop accumulator prematurely terminates due to erroneous
placement of latency_record_count.  It should be incremented whenever a
new record is allocated instead of increment on every latencytop event.

Also fix search iterator to only search known record events instead of
blindly searching all pre-allocated space.
Signed-off-by: NKen Chen <kenchen@google.com>
Reviewed-by: NArjan van de Ven <arjan@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clean_sort_range() should return a number of nonempty elements of range
array, but if the array is full clean_sort_range() returns 0.

The problem is that the number of nonempty elements is evaluated by
finding the first empty element of the array.  If there is no such element
it returns an initial value of local variable nr_range that is zero.

The fix is trivial: it changes initial value of nr_range to size of the
array.

The bug can lead to loss of information regarding all ranges, since
typically returned value of clean_sort_range() is considered as an actual
number of ranges in the array after a series of add/subtract operations.

Found by Analytical Verification project of Linux Verification Center
(linuxtesting.org), thanks to Alexander Kolosov.
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was a signedness bug so "ret" was never less than zero and that
breaks the error handling.  Also in the original code it would overwrite
ret and the result is still negative but it's bogus number instead of the
correct error code.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original code had a null dereference if alloc_percpu() failed.  This
was introduced in commit 711d3d2c ("memcg: cpu hotplug aware percpu
count updates")
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i2c_smbus_read_byte_data() may return negative error code.  This is not
seen to als_sensing_range_store() as the result is stored in unsigned int.

Made it signed.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Cc: Hong Liu <hong.liu@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Anantha Narayanan <anantha.narayanan@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"ret_val" is supposed to be signed here or the error handling breaks.
Also we should check the return value from i2c_smbus_read_byte_data().
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3e4d3af5 ("mm: stack based kmap_atomic()") introduced the
kmap_atomic_idx_push() function which warns on in_irq() with
CONFIG_DEBUG_HIGHMEM enabled.  This patch includes linux/hardirq.h for
the in_irq definition.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Followup of perf tools session in Netfilter WorkShop 2010

In the network stack we make high usage of atomic_inc_not_zero() in
contexts we know the probable value of atomic before increment (2 for udp
sockets for example)

Using a special version of atomic_inc_not_zero() giving this hint can help
processor to use less bus transactions.

On x86 (MESI protocol) for example, this avoids entering Shared state,
because "lock cmpxchg" issues an RFO (Read For Ownership)

akpm: Adds a new include/linux/atomic.h.  This means that new code should
henceforth include linux/atomic.h and not asm/atomic.h.  The presence of
include/linux/atomic.h will in fact cause checkpatch.pl to warn about use
of asm/atomic.h.  The new include/linux/atomic.h becomes the place where
arch-neutral atomic_t code should be placed.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following warning:
usr/include/linux/resource.h:49: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The size calculation is done incorrectly here because it should include
both the start and end (end - start + 1).  It's easiest to just use
resource_size() which does the right thing.

I was worried there was something non-standard going on because the
printk() subtracts "end - 1", but the rest of the file uses the normal
resource size calculations.  This function is only called from
fsl_rio_setup() in arch/powerpc/sysdev/fsl_rio.c and the calculation
there is also:

	port->iores.start = law_start;
	port->iores.end = law_start + law_size - 1;

So I think this is the correct fix.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix these warnings:

  drivers/macintosh/adb-iop.c: In function `adb_iop_complete':
  drivers/macintosh/adb-iop.c:85: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c:92: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c: In function ¡adb_iop_listen¢:
  drivers/macintosh/adb-iop.c:111: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c:151: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both commits 0a3d763f ("ptrace: cleanup arch_ptrace() on um") and
9b05a69e ("ptrace: change signature of arch_ptrace()") broke the um
build.  This patch fixes the issues.

0a3d763f introduced the undeclared variable "datavp".  The patch seems
completely untested.  :-(

9b05a69e changed arch_ptrace()'s signature but did not update
um/include/asm/ptrace-generic.h.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Tested-by: NWill Newton <will.newton@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_init_cxt() allocted sizeof(struct aa_task_cxt) bytes for cxt,
if register_security() failed, it will cause memory leak.
Signed-off-by: NZhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

policy->name is a substring of policy->hname, if prefix is not NULL, it will
allocted strlen(prefix) + strlen(name) + 3 bytes to policy->hname in policy_init().
use kzfree(ns->base.name) will casue memory leak if alloc_namespace() failed.
Signed-off-by: NZhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

A minor oversight from f7347ce4,
"fasync: re-organize fasync entry insertion to allow it under a
spinlock": this cleanup-on-error was only needed to handle -ENOMEM.  Now
that we're preallocating it's unneeded.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We must also free the passed-in lease in the case it wasn't used because
an existing lease was upgrade/downgraded or already existed.

Note the nfsd caller doesn't care because it's fl_change callback
returns an error in those cases.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>