This version brings along following fixes:
    - Added I2C escape to support query exist
    - Functionality to get pipe from stream context
    - debugfs entry fixes
    - Block zstate when more than one plane enabled
    - Update to engine ddc
    - Reading lante status during LT fixes
    - Null point filters
    - [FW Promotion] Release 0.0.108.0
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DCN31 has this in zstate save/restore sequence.
need for non_zstate supported ASIC

[how]
add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Underflow occurred while hubp ret pipe read is idle and the
second pipe is powered up and added. Flickering and underflow
are only observed on Pollock.

[How]
Check the hubp ret pipe read prior to unlock pipes.
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NBecle Lee <becle.lee@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Add null pointer filter for logical integrity.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NJing Zhou <Jing.Zhou@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In dp_get_lane_status_and_lane_adjust(), we call core_link_read_dpcd()
to get lane status but we ignore the return value of the function. If
there is problem with AUX and we eventually can only get partial data
from monitor, we might misuse the data to jude the link training result.
Which could have us trapped in the dc_link_dp_perform_link_training()
since we thought that we can still give a try on another link setting.

[How]
In dp_get_lane_status_and_lane_adjust(), take return value of
core_link_read_dpcd() into account. If we fail to read all requested
data, we treat lanes status as previous one and repeat LT steps again.
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We must support a new type of partial edid return in the future

[How]
Add interface and case hander for partial edid
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently Z10 save/restore only covers 1 plane case. If we enter
Z10 with 2 planes enabled, 1 of the 2 planes will not be restored.
causing black screen.

[How]
Disable Zstate when more than 1 plane is enabled. Right now Z9 enable
but Z10 disable is not a supported config, so we disable both.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Crash caused by a ddc update failure

[How]
Update engine ddc before release engine.
Reviewed-by: NWyatt Wood <Wyatt.Wood@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NJing Zhou <Jing.Zhou@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
1. To leverage and simplify the igt tool. Change the value of
retrain when calling preferred training settings.
Now, writing value to link settings triggers link training immediately.

2. Add dc lock when triggering link training in edp_ilr_write()
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need a helper function in dc to grab the pipe from the stream
context.

[How]
Add it.
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How]
1. Search OEM I2C info from BIOS and compare with input parameter.
2. If BIOS doesn't record it, just try to read one byte.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NJinZe.Xu <JinZe.Xu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable scatter/gather display for DCN 3.1.6.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To debug when p-state is being blocked and avoid PMFW hangs when
it does occur.

[How]
Re-use the DCN10 hardware sequencer by adding a new interface for
verifying p-state high on the hubbub. The interface is mostly the
same as the DCN10 interface, but the bit definitions have changed for
the debug bus.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
The DP KVM failed to light up, since the lttpr_mode is not reset to
default value when failed to read LTTPR capabilities, and the
variable max_link_rate retains a initial value zero, this cause variable
link_rate be assigned to an error value zero, consquently pixel_clock
get wrong value zero, and kvm can't light up.

[how]
Reset lttpr_mode to default value when failed to read LTTPR
capabilities, so that the link_rate fallbacks to the minimum rate that
supported by link encoder and sink.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

FPU operations in dcn10 was already moved to dml folder via calcs code.
However, dcn1_0_ip and dcn_1_0_soc with FPU componentd remains on dcn10.
Following previous changes to isolate FPU, this patch creates dcn10_fpu
files to isolate FPU-specific code and moves those structs to it.
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dml/dcn20_fpu file centralizes all DCN2x functions that require FPU access.
Therefore, this patch moves FPU-related code from dcn21 to dcn20_fpu. These
include:
- dcn21_populate_dml_pipes_from_context()
- dcn21_validate_bandwidth_fp() and related:
  - dcn21_calculate_wm(),
  - patch_bounding_box(),
  - calculate_wm_set_for_vlevel()
- renaming update_bw_bounding_box() to dcn21_update_bw_bounding_box(), move
to dcn20_fpu with related static function construct_low_pstate_lvl()

Also, make dcn21_fast_validate_bw() public in dcn21_resource as it is called
by dcn21_validate_bandwidth_fp() now in dcn20_fpu.

Reuse dcn20_fpu_adjust_dppclk() in dcn21_fast_validate_bw() as it isolates
the same FPU operation.

Include dchubbub.h as it is required in dcn21_populate_dml_pipes_from_context()
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move parts of dcn20 code that uses FPU to dml folder. It aims to isolate
FPU operations as described by series:

drm/amd/display: Introduce FPU directory inside DC
https://patchwork.freedesktop.org/series/93042/

This patch moves the following functions from dcn20_resource to
dml/dcn20_fpu and calls of public functions in dcn20_resource are
wrapped by DC_FP_START/END():

- void dcn20_populate_dml_writeback_from_context
- static bool is_dtbclk_required()
- static enum dcn_zstate_support_state()
- void dcn20_calculate_dlg_params()
- static void swizzle_to_dml_params()
- int dcn20_populate_dml_pipes_from_context()
- void dcn20_calculate_wm()
- void dcn20_cap_soc_clocks()
- void dcn20_update_bounding_box()
- void dcn20_patch_bounding_box()
- bool dcn20_validate_bandwidth_fp()

This movement also affects dcn21/30/31, as dcn20_calculate_dlg_params()
is used by them. For this reason, I included dcn20_fpu headers in
dcn20_resource headers to make dcn20_calculate_dlg_params() visible to
dcn21/30/31.

Three new functions are created to isolate well-delimited FPU
operations:

- void dcn20_fpu_set_wb_arb_params(): set cli_watermark,
  pstate_watermark and time_per_pixel from wb_arb_params (struct
mcif_arb_params), since those uses FPU operations on double types:
WritebackUrgentWatermark, WritebackDRAMClockChangeWatermark, '16.0'.
- void dcn20_fpu_set_wm_ranges(): set min_fill_clk_mhz and
  max_fill_clk_mhz involves FPU calcs on dram_speed_mts (double type);
- void dcn20_fpu_adjust_dppclk(): adjust operation on RequiredDPPCLK
  that is a double.
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

On LNX, TO_CLK_MGR_INTERNAL() only works to get clk_mgr_internal from a
given clk_mgr. In clk_mgr_dcn316 struct, the clk_mgr_internal is already
a memeber by the alias 'base'

[How]

Use &clk_mgr->base instead.
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The issue only occurs during the GPU reset code path.

We first backup the current state prior to commiting 0 streams
internally from DM to DC. This state backup contains valid link
encoder assignments.

DC will clear the link encoder assignments as part of current state
(but not the backup, since it was a copied before the commit) and
free the extra stream reference it held.

DC requires that the link encoder assignments remain cleared/invalid
prior to commiting. Since the backup still has valid assignments we
call the interface post reset to clear them. This routine also
releases the extra reference that the link encoder interface held -
resulting in a double free (and eventually a NULL pointer dereference).

[How]
We'll have to do a full DC commit anyway after GPU reset because
the stream count previously went to 0.

We don't need to retain the assignment that we had backed up, so
just copy off of the now clean current state assignment after the
reset has occcurred with the new link_enc_cfg_copy() interface.

Fixes: 6d63fcc2 ("drm/amd/display: Reset link encoder assignments for GPU reset")
Reviewed-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Virtualization enters blue screen of death (BSoD)
due to NULL res_pool object when accessing DSC
encoder capability.

[How]
Add NULL check to avoid blue screen of death.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NChris Park <Chris.Park@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.176

    This version brings along following fixes:
    - move FPU operations from dcn21 to dml/dcn20 folder
    - move FPU-related code from dcn20 to dml folder
    - Fix compile error from TO_CLK_MGR_INTERNAL
    - Fix double free during GPU reset on DC streams
    - Add NULL check
    - [FW Promotion] Release 0.0.107.0
    - enable dcn315/316 s0i2 support
    - handle DP2.0 RX with UHBR20 but not UHBR13.5 support
    - disable HPD SW timer for passive dongle type 1 only
    - add gamut coefficient set A and B
    - merge two duplicated clock_source_create
    - Add link dp trace support
    - move FPU associated DCN303 code to DML folder
    - Release AUX engine after failed acquire
    - Add minimal pipe split transition state
    - Clean up fixed VS PHY test w/a function
    - fix the clock source contruct for dcn315
    - cleaning up smu_if to add future flexibility
    - fix deep color ratio
    - add debug option to bypass ssinfo from bios for dcn315
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
enable the support in driver, let the control by CMOS
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DP2.0 defines DP2.0 RX capability using bit maps. This means there is
a corner case the DP2.0 RX can declare UHBR20 capability but not UHBR13.5 support.
In this case we should skip UHBR13.5 selection and continue to our next option
in decide liink settings.
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Need to provide this workaround
only for type 1 passive dongle

[how]
Detect if dongle is type 1 or 2.
And use it to determine if w/a is needed.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NSung Joon Kim <sungjoon.kim@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Screen shake on DCN3 night light SDR BR3.

[How]
Change the logic to use double buffer reisgter on gamut settings.
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NJingwen Zhu <jingwen.zhu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
dcn31x could use dcn31 sepcific which contains deep_color_ratio for dmub
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: NHansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It is nice to have link training and link loss status logging in
our trace, and this patch add the all necessary accessors in dc
side.

[How]
1. Define dp_trace struct and create new file link_dp_trace.c and
link_dp_trace.h;
2. Add dp link training status update in dc_link_dp.c;
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN303 to DML, where all FPU code
should locate.
Co-authored-by: NJasdeep Dhillon <jasdeep.dhillon@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NJasdeep Dhillon <jasdeep.dhillon@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
There is a sequence in which aux arbitration
doesn't work correctly. Driver is left with
aux access after it times out waiting for access.
In future dmub fw is never granted aux access
and is stuck in a while loop.

[How]
Cancel aux request from driver after timing out.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY?] When adding/removng a plane to some configurations,
unsupported pipe programming can occur when moving to a new plane.

[HOW?]
Add a safe transistion state before programming new configuration.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Unify naming for fixed VS workarounds.

[How]
Rename function to match naming convention.
Refactor code to remove unused function.
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Driver sends invalid deep color ratio to DMUB. Update it to the right
one by using another clock source construct.
Reviewed-by: NHansen Dsouza <hansen.dsouza@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why and how:
need to hook in new smu interfaces
cleaning up code that used old variables
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NLeung, Martin <Martin.Leung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix enum mapping for deep color ratio
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NHansen Dsouza <Hansen.Dsouza@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Add debug option to bypass ssinfo from BIOS for dcn315.
Reviewed-by: NPark, Chris <Chris.Park@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.175

    This version brings along following fixes:
    - Remove invalid RDPCS Programming in DAL
    - Make functional resource functions non-static
    - Reset VIC if HDMI_VIC is present
    - Add frame alternate 3D & restrict HW packed on dongles
    - Reg to turn on/off PSR Power seq in FSM
    - Modify plane removal sequence to avoid hangs
    - Pass HostVM enable flag into DCN3.1 DML
    - DC Validation failures
    - Program OPP before ODM
    - Refactor fixed VS w/a for PHY tests
    - Pass deep sleep disabled allow info to dmub fw
    - Refine the EDID override
    - [FW Promotion] Release 0.0.106.0
    - Add verify_link_cap back for hdmi
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
hdmi specific: add verify link cap after retrive link cap.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>