- 19 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The auto-mic clean-up patches caused regressions on some ALC268 models that have no proper input_mux but with "Input Source" mixer elements. Such a combination results in Oops when accessed. [A reason why set_capture_mixer() isn't used in patch_alc268() is that ALC268 codec have HDA_OUTPUT direction for capture volumes unlike other codecs. Thus it needs own definitions of capture elements.] This patch fixes the issues: - Add a capture mixer definition without input-source - Use the new capture mixer appropriately Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The previous fix removed the definition of num_adc_nids wrongly, and this resulted in the missing input-source control. Now readded again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 8月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
A few improvements for IDT 92HD83xxx codec pareser: - Remove unused / deprecated mixer-amp controls - Handle d-mics as normal inputs since this codec has no separate MUXes for analog and digital - Don't create duplicated controls for capture volumes with Mux capture volumes Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 13 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Enable line-out detection for IDT/STAC codecs only when speaker pins exist. In some cases, the speaker itself is identified as line-out, and this confuses the situation. Only the extra line-outs should do auto-muting. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 8月, 2009 2 次提交
-
-
With auto config model of alc268 realtek codec, it allows to select any of possible available digital microphone inputs when only one is available. For example, when only digital mic in nid 0x12 is available, on second input source it will allow you to select unavailable digital mic in nid 0x13. The problem is that selecting unavailable digital mic creates a source of noise when recording (I'm not sure if this happens on all machines with alc268 and only one digital mic input, but testing on a quanta uw1 netbook a lot of noise is introduced in recording from digital mic 0x12/first input source, when you select the unavailable digital mic 0x13 for capture source 0x24 in the second input source in mixer). Then to avoid noise when recording from digital mic with auto model in this case, prevent a digital mic input source to be selected if microphone is not available. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Move static codes to setup from init_hook for each model. Also, use the common auto-mic selection helper for devices that support auto-mic selection. They just need to set up ext_mic, int_mic and auto_mic flag in the setup section. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 8月, 2009 7 次提交
-
-
由 Takashi Iwai 提交于
Added setup hook to ALC preset struct to be called at in the parser but not at each init callback. This can be used for setting up the static pins, etc, while the init hook should be used for updating the status again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Created a white-list to enable MSI since some devices require MSI explicitly due to BIOS/ACPI problems. Simply using a quirk list. As the first case, take HP Compaq CQ40. Reference: Novell bnc#529971 https://bugzilla.novell.com/show_bug.cgi?id=529971Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some Realtek codecs don't provide the full connections for certain pins from each ADC; e.g. ACL662/ALC272 gives only one of two digital-mic pins for each ADC. Thus, depending on the digital mic pin, the ADC/MUX to be used has to be chosen properly. This patch adds the check of the connectivity of pins at auto-mic mode. If no proper connectivity is found, auto_mic flag is turned off to be sure. Also the mux_idx is determined during this check so it won't be checked in the unsol event any more. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
ALC269 and ALC861-VD parsers override the ADC definitions unconditionally without checking the spec definition. This causes the problem when any inconsistent ADC is set up in the device quirk (like ALC272 with digital-mic). This patch avoids the overriding by adding the proper checks. Reference: Novell bnc#529467 https://bugzilla.novell.com/show_bug.cgi?id=529467Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When the auto-mic feature is enabled, we should support only one capture stream. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support for automatic mic selection via plugging for Realtek codecs (in auto-probing mode). The auto-mic mode is enabled only when one internal mic and one external mic are present. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 8月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Without the initialization of vmaster NID, the dB information got confused for ALC269 codec. Reference: Novell bnc#527361 https://bugzilla.novell.com/show_bug.cgi?id=527361Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
The previous auto-mic patch for STAC/IDT codecs causes the Oops on machines without digital mic pins. This patch fixes the problem. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The new HP laptops have PCI SSID 103c:701x and requires model=hp-dv5. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
When the line-out jack is plugged/unplugged, the driver needs to check the headphone plug, not only the line-out jack itself. Otherwise the headphone or the speaker may be wrongly muted/unmuted. As a result, both STAC_HP_EVENT and STAC_LO_EVENT need to call the same function, stac92xx_hp_detect(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 8月, 2009 12 次提交
-
-
由 Takashi Iwai 提交于
The commit fefd67f3 ALSA: hda - Add line-out jack detection on IDT/STAC codecs enabled wrong pins for jack detections. Fixed to the correct ones. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Wu Fengguang 提交于
The new IbexPeak HDMI codec has 3 pin nodes and 2 converter nodes. Here we assume only the first ones will be used. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Roel Kluin 提交于
Check whether index is within bounds before testing the element. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chengu Wang 提交于
The commit 24918b61 statically changes the model from dell-bios to dell-3stack to solve the sound decreasing regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another problem that the 2nd headphone jack doesn't work (https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think the commit 249**2dc is just a workaround. I would like to give a true solution here. The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as GPIO2. This patch changes EAPD to GPIO0 to solve the problem. Signed-off-by: NChengu Wang <wangchengu@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
To help disclose hardware bugs. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
This converts the last CORBWP access outside of reg_lock. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Just for safety. azx_init_cmd_io() and azx_free_cmd_io() may be called when switching to single command mode. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Now that each codec will have its own module, it is possible for the user to load one codec while another one is running. So cmd_mutex would be a safe addition to probe_codec(). Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Recently we hit a bug in our dev board, whose HDMI codec#3 may emit redundant/spurious responses, which were then taken as responses to command for another onboard Realtek codec#2, and mess up both codecs. Extend the azx_rb.cmds and azx_rb.res to array and track each codec's commands/responses separately. This helps keep good codec safe from broken ones. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use model=lenovo instead of model=dallas for Toshiba Satellite A135-S4527 with ALC861-VD codec. Reference: Novell bnc#526325 https://bugzilla.novell.com/show_bug.cgi?id=526325Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 7月, 2009 4 次提交
-
-
由 Takashi Iwai 提交于
The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Add the automatic mute of speakers via line-out jack plugging on STAC/IDT codecs. The feature is enabled when the HP detect is present. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 7月, 2009 5 次提交
-
-
由 Stelian Pop 提交于
The patch below, to be applied on the latest sound-unstable-2.6.git, enables headphones output on my MacBookPro 5,5, together with the automuting feature. Here is the exact soundcard id: Vendor Id: 0x10134206 Subsystem Id: 0x106b4d00 Revision Id: 0x100301 Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
STAC/IDT codecs provide both "Input Source" and "Digital Input Source" controls to choose the analog input source and the digital input source. But this is far user-unfriendly. This patch merges the input source selections into one "Input Source" control. To have separate digital and analog input source controls, you can pass "separate_dmux = 1 " hint string. At the same time, this patch gets rid of analog mixer stuff that was already disabled in previous patches. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The commit 6479c631 ALSA: hda - Create Capture controls dynamically introduced typos of "Capture". Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
It auto mutes all 8-channel outputs at rear panel when the front panel headphone is connected. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
This 2-channel mode is useful in that it will broadcast a 2-channel audio stream to all front/side/... ports. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-