- 31 1月, 2011 1 次提交
-
-
由 Amerigo Wang 提交于
Silent these echo's, please. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 1月, 2011 3 次提交
-
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/707902 More Thinkpad machines with invalid SKU found, that disables automute between speakers and headphones on these machines. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
This typo caused the dmesg output of the supported bits of HDMI to be cut off early. Cc: stable@kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hans-Christian Egtvedt 提交于
This patch fixes the non-compiling AC97C driver for AVR32 architecture by include mach/hardware.h only for AT91 architecture. The AVR32 architecture does not supply the hardware.h include file. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> CC: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 1月, 2011 4 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
ASoC DAI link descriptions for Corgi, Poodle and Spitz platforms contained incorrect names for cpu_dai and codec, which effectievly disabled sound on theese platforms. Fix that errors. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Andreas Mohr 提交于
Cleanly revert to non-macro implementation of snd_azf3328_codec_setfmt(), to fix last-minute functionality breakage induced by following checkpatch.pl recommendations without giving them their due full share of thought ("revolting computer, ensuing PEBKAC"). I would like to thank Jiri Slaby for his very timely (in -rc1 even) and unexpected (uncommon hardware) "recognition of the dangerous situation" due to his very commendable static parser use. :) Reported-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
'cs4398_regs' in 'struct xonar_cs43xx' is an array of 'u8' with a size of 8. So, this code in sound/pci/oxygen/xonar_cs43xx.c::dump_d1_registers() for (i = 2; i <= 8; ++i) snd_iprintf(buffer, " %02x", data->cs4398_regs[i]); will overrun the array when 'i == 8'. I guess that what's needed to fix it is the trivial patch below, but I must admit that I have no idea about this code, so I may very well be wrong. Additionally, I have no way to actually test this, so all I know is that the below compiles. Someone who actually knows this code should take a look before anything is comitted - consider the below (not much more than) a bug report. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: Clemens Ladisch <clemens@ladisch.de Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 1月, 2011 2 次提交
-
-
由 Mark Brown 提交于
The DC servo codes are actually signed numbers so need to be treated as such. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
-
由 Rajashekhara, Sudhakar 提交于
The codec_name entry for da8xx evm in sound/soc/davinci/davinci-evm.c is not matching with the i2c ids in the board file. Without this fix the soundcard does not get detected on da850/omap-l138/am18x evm. Signed-off-by: NRajashekhara, Sudhakar <sudhakar.raj@ti.com> Tested-by: NDan Sharon <dansharon@nanometrics.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org (for 2.6.37)
-
- 20 1月, 2011 4 次提交
-
-
由 Anisse Astier 提交于
Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/705323 Thinkpad Edge 14 has one more SSID that suffers from disabled auto-mute. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
sound/pci/hda/patch_realtek.c: In function ‘alc_apply_fixup’: sound/pci/hda/patch_realtek.c:1724:14: warning: unused variable ‘modelname’ snd_printdd() is evaluated only when CONFIG_SND_DEBUG_VERBOSE=y. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It seems working well with model=hp-bpc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 1月, 2011 9 次提交
-
-
由 Qiao Zhou 提交于
fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: NQiao Zhou <zhouqiao@marvell.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Dimitris Papastamos 提交于
In the wm8995_set_tristate() function when updating the register bits use the value and not the register index as the value argument. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Takashi Iwai 提交于
This reverts commit 03b7a1ab. This commit was mistakenly re-introduced. While the change is harmless (as ALC887 uses patch_alc888() now), we should get rid of any wrong code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vasily Khoruzhick 提交于
WM8750 address is 0x1b, not 0x1a. Without this fix ALSA detects no sound cards on Zipit Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vasily Khoruzhick 提交于
Fix jack detection on Zipit Z2, otherwise it disables headphones output when jack is connected Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Barry Song 提交于
While I2S/TDM/AC97 DAI is built-in, others are compiled as modules, SND_BF5XX_SOC_SPORT will be module, then DAI can't get some symbols. Except that, SND_BF5XX_AC97 depends on SND_BF5XX_SOC_AC97 too. Signed-off-by: NBarry Song <barry.song@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Barry Song 提交于
We don't want to use internal frame syncs otherwise we sometimes get out of sync, so don't enable them when setting up the SPORT. Signed-off-by: NBarry Song <barry.song@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mike Frysinger 提交于
We need to tweak how we query the active capture/playback state after the recent overhauls of common code. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Mike Frysinger 提交于
One spot was missed in this driver when converting from snd_soc_dai.private_data to snd_soc_dai_get_drvdata. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 18 1月, 2011 5 次提交
-
-
由 Brian Bloniarz 提交于
The driver was using an initial value for the clock on the SPI bus which was read from ICE1712 EEPROM, ice->eeprom.data[ICE_EEP1_GPIO_STATE] & ICE1712_DELTA_AP_CCLK (0x02) It appears some cards have it default high, some cards have it default low. On my Delta 66 rev. E: $ cat /proc/asound/M66/ice1712 | grep 'GPIO state' GPIO state : 0x70 /* ICE1712_DELTA_AP_CCLK bit is zero */ On my Audiophile 2496: $ cat /proc/asound/M2496/ice1712 | grep 'GPIO state' GPIO state : 0xfe /* ICE1712_DELTA_AP_CCLK bit is one */ It must be raised before the first SPI write happens, or the write will fail, leading to: [ 23.248721] invalid CS8427 signature 0x0: let me try again... I theorize that 4eb4550a is no longer needed, it was a different way to workaround the problem. [fixed variable decleration by tiwai] Signed-off-by: NBrian Bloniarz <brian.bloniarz@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
Fixes for HP 2011 notebooks: enable dock ports and disable BTL initialization in the driver. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Bankim Bhavsar 提交于
Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio Controller. [changed to use AZX_DRIVER_GENERIC by tiwai] Signed-off-by: NBankim Bhavsar <bbhavsar@vmware.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Raymond Yau 提交于
Attached a patch which add a new model to support multi-streaming playback for ad1988. playback another stereo stream through the front panel headphone on device 2 while playback through the speakers connected to rear panel on device 0 at the same time. Tested with ad1988a rev2 codec on asus P5B-V motherboard. Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 1月, 2011 3 次提交
-
-
由 Alexander Sverdlin 提交于
Changelog: 1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is hardware limitation and that's the way original Cirrus's driver worked. This will fix distorted sound playback and make capture actually work in present ep93xx drivers. I've found, that author of code, on which modern ep93xx-i2s.c and ep93xx-pcm.c are based, had faced this problem also in 2007: http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3 Now SoC code uses his developments, but not overcomes the hardware issues. Some details from EP93xx users guide: Both I2S transmitter and receiver have similar 16x32bit FIFO, where they store 8 samples for both left and right channels. The FIFO is always 32bit wide and should be properly aligned if you use samples of other width. Transmitter and receiver have configuration registers for selection of I2S word length (16, 24, 32). They are I2STXWrdLen and I2SRXWrdLen. Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for transfers to and from peripherals is selected by particular module configuration. Lucky AC97 module has such configuration: AC97RXCRx registers, bit CM (Compact mode enable) switches between 16 and 32 bit samples. AC97TXCRx registers have the same bits for transmitters. ep93xx-ac97.c enables this compact mode and so has all the rights to use S16_LE format. No one has found such a configuration in I2S module until now in any Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit samples consecutively for left and right channels. You cannot use 32-bit DMA transfers to transfer two 16-bit samples. So we can use two formats for AC97, but should remove all but S32_LE for I2S. Always using 32 bit chunks is not a problem for I2S, the codec I use uses less bits too (24), it's permitted by I2S standard. In proposed patch formats list shortened to just S32_LE, this makes all the DMA transactions right, while ALSA will do all sample format translation for us. 2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c masks the first problem. DMA takes two 16 bit samples instead of one, overall sound speed seems to be normal, but you get actually 4000 sampling rate instead of requested 8000 and therefore some noise... This is also the reason why the capture function not worked at all in this driver... If we take a look into I2S specification, we will figure that LRCLK MUST be equal to sample rate, if we are talking about stereo (in mono too, but it's not our case at all). In proposed patch SCLK and LRCLK rates are corrected, assuming we always send 32 bits * 2 channels to codec. Signed-off-by: NAlexander Sverdlin <subaparts@yandex.ru> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dimitris Papastamos 提交于
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Raymond Yau 提交于
Fix playback/capture channels patch to change supported playback channels of au8830 to 1,2,4 and capture channels to 1,2. This prevent oops when oss emulation use SNDCTL_DSP_CHANNELS to set 3 Channels Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 1月, 2011 1 次提交
-
-
由 Hanno Boeck 提交于
Signed-off-by: NHanno Boeck <hanno@hboeck.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2011 6 次提交
-
-
由 Matti J. Aaltonen 提交于
These changes are needed to keep up with the changes in the MFD core and V4L2 parts of the wl1273 FM radio driver. Use function pointers instead of exported functions for I2C IO. Also move all preprocessor constants from the wl1273.h to include/linux/mfd/wl1273-core.h. Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
The commit ad09fc9d didn't cover the case for Intel and Nvidia HDMIs, where hdmi_pcm_open() is called. Put the hw_constraint there, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In hdmi_pcm_open(), the evaluated PCM hw parameters are stored in hinfo, but these aren't properly set back to the current runtime record since these have been set beforehand in azx_pcm_open(). This patch fixes the behavior. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Accidentally exchanging register addresses and register values leads to many strange errors ... Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It looks like that HDMI codecs don't support the odd number of channels although HD-audio spec doesn't have the restriction. Add the hw_constraint to limit to only the even number of channels. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 1月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
In some cases, the fix-up is required in the init callback to be called both at the first initialization and at the resume. The new action type ALC_FIXUP_ACT_INIT is used for this case. So far, only ALC275_FIXUP_SONY_HWEQ uses this. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-