* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ata: add CFA specific identify data words
  remove stale comment from <linux/hdreg.h>
  AT91: initialize Compact Flash on AT91SAM9263 cpu
  ide: add at91_ide driver
  ide: allow to wrap interrupt handler
  ide-iops: fix odd-length ATAPI PIO transfers
  ide: NULL noise: drivers/ide/ide-*.c
  ide: expiry() returns int, negative expiry() return values won't be noticed

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Don't trust current capacity values in identify words 57-58
  libata: make sure port is thawed when skipping resets
  sata_nv: fix module parameter description
  ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c
  libata: don't use on-stack sense buffer
  libata: align ap->sector_buf
  libata: fix dma_unmap_sg misuse
  libata: change drive ready wait after hard reset to 5s

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: frag_size should be signed, as it can hold an error result
  Squashfs: fix documentation typo, Cramfs filesystem limit is 256 MiB
  Squashfs: Fix oops when reading fsfuzzer corrupted filesystems

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smack: fixes for unlabeled host support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio - fix protocol number for TouchIT213

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix missing bio back/front segment size setting in blk_recount_segments()
  loop: don't increment p->offset with (size_t) -EINVAL
  cciss: remove 30 second initial timeout on controller reset
  Fix kernel NULL pointer dereference in xen-blkfront

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix headphone-detect regression with multiple HP jacks
  ALSA: hda - Fix typos in slave controls in patch_sigmatel.c

This is a build fix required after "x86-64: seccomp: fix 32/64 syscall
hole" (commit 5b101740).  MIPS doesn't
have the issue that was fixed for x86-64 by that patch.

This also doesn't solve the N32 issue which is that N32 seccomp processes
will be treated as non-compat processes thus only have access to N64
syscalls.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Protocol 0x37 has been reserved for iNexio devices and Sahara
was supposed to get 0x38.
Reported-by: NClaudio Nieder <private@claudio.ch>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We recently discovered a problem with passing of DMA attributes on SN
systems with the older PIC chips.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJeremy Higdon <jeremy@sgi.com>
Cc: <habeck@sgi.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The recent changes over the DAC detection mechanism in patch_sigmatel.c
breaks the HP detection on the machines with multiple HP jacks.
It's basically because of the workaround to support the multi-channel
output.  Since the HP detection is more important feature, disable
the HP-swap workaroud temporarily.

Reference: Novell bnc#482052
	https://bugzilla.novell.com/show_bug.cgi?id=482052Signed-off-by: NTakashi Iwai <tiwai@suse.de>

"Headphone Playback ..." appears twice in slave_vols[] and slave_sws[].
They should be "Headphone Playback2 ..."
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 1e428079 introduced a bug where we
don't get front/back segment sizes in the bio in blk_recount_segments().
Fix this by tracking the back bio as well as the front bio in
__blk_recalc_rq_segments(), this also cleans up the interface by getting
rid of the segment size pointer passing.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Declare CFA specific identify data words 162 and 163 for future use.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
[bart: update patch summary/description]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

HDIO_GET_IDENTITY returns 256 words currently.

Noticed by Norman Diamond.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory
Controller with Compact Flash True IDE Mode logic.

Driver have to switch 8/16 bit bus width when accessing Task Tile or Data
Register. Moreover some extra things need to be done when setting PIO mode.
Only PIO mode is used, hardware have no DMA support. If interrupt line is
connected through GPIO extra quirk is needed to cope with fake interrupts.
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <linux@maxim.org.za>
[bart: minor checkpatch.pl / CodingStyle fixups]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Commit 9567b349 (ide: merge ->atapi_*put_bytes
and ->ata_*put_data methods) introduced a regression  WRT the odd-length ATAPI
PIO transfers -- the final word didn't get written (causing command timeouts).
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix this sparse warnings:
  drivers/ide/ide-disk_proc.c:130:11: warning: Using plain integer as NULL pointer
  drivers/ide/ide-floppy_proc.c:32:11: warning: Using plain integer as NULL pointer
  drivers/ide/ide-proc.c:234:11: warning: Using plain integer as NULL pointer
  drivers/ide/ide-tape.c:2141:11: warning: Using plain integer as NULL pointer
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Cc: kernel-janitors@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

bart:
It seems like the bug could cause insanely long timeouts for:
- ATA_DMA_ERR error in dma_timer_expiry()
- commands without ->expiry in tc86c001_timer_expiry()
  (TC86C001 IDE controller only)
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: port it to the current tree]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive
was reported as 1.1TB in capacity by libata:

http://lkml.org/lkml/2009/2/13/134

This was caused by libata trusting the drive's reported current capacity in
sectors in identify words 57 and 58 if the drive does not support LBA and the
current CHS translation values appear valid. Unfortunately it seems older
ATA specs were vague about what this field should contain and a number of drives
used values with wrong byte order or that were totally bogus. There's no
unique information that it conveys and so we can just calculate the number
of sectors from the reported current CHS values.

While we're at it, clean up this function to use named constants for the
identify word values.
Signed-off-by: NRobert Hancock <hancockrwd@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When SCR access is available and the link is offline, softreset is
skipped as it only wastes time and some controllers don't respond very
well.  However, the skip path forgot to thaw the port, which not only
blocks further event notification from the port but also causes
repeated EH invocations on the same event on drivers which rely on
->thaw() to clear events if the IRQ is shared with another device or
port.

This problem has always been there but is uncovered by recent sata_nv
nf2/3 change which dropped hardreset support while maintaining SCR
access.  nf2/3 doesn't clear hotplug event mask from the interrupt
handler but relies on ->thaw() to clear them.  When the hardreset was
there, the reset action was never skipped and the port was always
thawed but, with the hardreset gone, ->prereset() determines that
there's no need for softreset and both ->softreset() and ->thaw() are
skipped.  This leads to stuck hotplug event in the IRQ status register
triggering hotplug event whenever IRQ is delieverd on the same IRQ.
As the controller shares the same IRQ for both ports, this happens on
every IO if one port is occpupied and the other isn't.

This patch fixes the problem by making sure that the port is thawed on
reset-skip path.

bko#11615 reports this problem.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockrwd@gmail.com>
Reported-by: NDan Andresan <danyer@gmail.com>
Reported-by: NArne Woerner <arne_woerner@yahoo.com>
Reported-by: NStefan Lippers-Hollmann <s.L-H@gmx.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Update MODULE_PARM_DESC for ADMA to reflect the fact that the
option is disabled by default.
Signed-off-by: NBrandon Ehle <azverkan@yahoo.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Added the Device IDs for MCP89 AHCI controller.

Removed the IDs of MCP7B because this chipset had been cancelled.
Signed-off-by: NPeer Chen <peerchen@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

sense_buffer is used as DMA target and shouldn't be allocated on
stack.  Use ap->sector_buf instead.  This problem is spotted by Chuck
Ebbert.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NChuck Ebbert <cebbert@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

ap->sector_buf is used as DMA target and should at least be aligned on
cacheline.  This caused problems on some embedded machines.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

libata passes the returned value of dma_map_sg() to
dma_unmap_sg(),which is the misuse of dma_unmap_sg().

DMA-mapping.txt says:

To unmap a scatterlist, just call:

	pci_unmap_sg(pdev, sglist, nents, direction);

Again, make sure DMA activity has already finished.

PLEASE NOTE:  The 'nents' argument to the pci_unmap_sg call must be
              the _same_ one you passed into the pci_map_sg call,
	      it should _NOT_ be the 'count' value _returned_ from the
              pci_map_sg call.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This fixes problems during resume with drives that take longer than 1s to
be ready.  The ATA-6 spec appears to allow 5 seconds for a drive to be
ready.

On one affected system, this patch changes "PM: resume devices took..."
message from 17 seconds to 4 seconds, and gets rid of a lot of ugly
timeout/error messages.

Without this patch, the libata code moves on after 1s, tries to send a
soft reset (which the drive doesn't see because it isn't ready) which also
times out, then an IDENTIFY command is sent to the drive which times out,
and finally the error handler will try to send another hard reset which
will finally get things working.
Signed-off-by: NStuart Hayes <stuart_hayes@dell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Upon a 'transfer error block' size is set to -EINVAL, but this becomes positive
since size is unsigned: p->offset still gets incremented.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Commit 5e4c91c8 forgot to remove the
initial sleep, get rid of it.

Thanks to Randy Dunlap <randy.dunlap@oracle.com> for spotting this error.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

When booting Xen Dom0 on a pre-release 3.2.1 hypervisor the system Oopses on a
"Unable to handle kernel NULL pointer dereference" in xenwatch.

From the backtrace it looks like backend_changed is calling bdget_disk
with a NULL pointer.  Checking for NULL and returning ENODEV instead
allows the kernel to boot.

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

This fixes a code regression caused by the recent mainlining changes.
The recent code changes call zlib_inflate repeatedly, decompressing into
separate 4K buffers, this code didn't check for the possibility that
zlib_inflate might ask for too many buffers when decompressing corrupted
data.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

The following patch (against 2.6.29rc5) fixes a few issues in the
smack/netlabel "unlabeled host support" functionnality that was added in
2.6.29rc.  It should go in before -final.

1) smack_host_label disregard a "0.0.0.0/0 @" rule (or other label),
preventing 'tagged' tasks to access Internet (many systems drop packets with
IP options)

2) netmasks were not handled correctly, they were stored in a way _not
equivalent_ to conversion to be32 (it was equivalent for /0, /8, /16, /24,
/32 masks but not other masks)

3) smack_netlbladdr prefixes (IP/mask) were not consistent (mask&IP was not
done), so there could have been different list entries for the same IP
prefix; if those entries had different labels, well ...

4) they were not sorted

1) 2) 3) are bugs, 4) is a more cosmetic issue.
The patch :

-creates a new helper smk_netlbladdr_insert to insert a smk_netlbladdr,
-sorted by netmask length

-use the new sorted nature of  smack_netlbladdrs list to simplify
 smack_host_label : the first match _will_ be the more specific

-corrects endianness issues in smk_write_netlbladdr &  netlbladdr_seq_show

Signed-off-by: <etienne.basset@numericable.fr>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Reviewed-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Run sbc610 USB fixup code only on the appropriate platform.

[airlied: you shall not retype patches from other trees half asleep]
Signed-of-by: NDave Airlie <airlied@redhat.com>

commit a969e76a (powerpc: Correct USB
support for GE Fanuc SBC610) introduced a fixup for NEC usb controllers.
This fixup should only run on GEF SBC610 boards.

Fixes Fedora bug #486511.
(https://bugzilla.redhat.com/show_bug.cgi?id=486511)
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>