- 30 10月, 2018 2 次提交
-
-
由 Trond Myklebust 提交于
Convert structs ip_map and unix_gid to use RCU protected lookups. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
Instead of the reader/writer spinlock, allow cache lookups to use RCU for looking up entries. This is more efficient since modifications can occur while other entries are being looked up. Note that for now, we keep the reader/writer spinlock until all users have been converted to use RCU-safe freeing of their cache entries. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 03 10月, 2018 3 次提交
-
-
由 Trond Myklebust 提交于
This is a trivial split into lookup and insert functions, no change in behavior. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
Avoid taking the global auth_domain_lock in most lookups of the auth domain by adding an RCU protected lookup. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
Module removal is RCU safe by design, so we really have no need to lock the 'authtab[]' array. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 26 9月, 2018 5 次提交
-
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: fs/nfsd/vfs.c: In function 'nfsd_create': fs/nfsd/vfs.c:1279:16: warning: variable 'dirp' set but not used [-Wunused-but-set-variable] Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Olga Kornievskaia 提交于
Upon receiving a request for async copy, create a new kthread. If we get asynchronous request, make sure to copy the needed arguments/state from the stack before starting the copy. Then start the thread and reply back to the client indicating copy is asynchronous. nfsd_copy_file_range() will copy in a loop over the total number of bytes is needed to copy. In case a failure happens in the middle, we ignore the error and return how much we copied so far. Once done creating a workitem for the callback workqueue and send CB_OFFLOAD with the results. The lifetime of the copy stateid is bound to the vfs copy. This way we don't need to keep the nfsd_net structure for the callback. We could keep it around longer so that an OFFLOAD_STATUS that came late would still get results, but clients should be able to deal without that. We handle OFFLOAD_CANCEL by sending a signal to the copy thread and calling kthread_stop. A client should cancel any ongoing copies before calling DESTROY_CLIENT; if not, we return a CLIENT_BUSY error. If the client is destroyed for some other reason (lease expiration, or server shutdown), we must clean up any ongoing copies ourselves. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> [colin.king@canonical.com: fix leak in error case] [bfields@fieldses.org: remove signalling, merge patches] Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Olga Kornievskaia 提交于
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Olga Kornievskaia 提交于
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Olga Kornievskaia 提交于
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 24 9月, 2018 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 23 9月, 2018 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Greg Kroah-Hartman 提交于
Lee writes: "MFD fixes for v4.19 - Fix Dialog DA9063 regulator constraints issue causing failure in probe - Fix OMAP Device Tree compatible strings to match DT" * tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: omap-usb-host: Fix dts probe of children mfd: da9063: Fix DT probing with constraints
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Greg Kroah-Hartman 提交于
Juergen writes: "xen: Two small fixes for xen drivers." * tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: issue warning message when out of grant maptrack entries xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code
-
git://git.kernel.dk/linux-block由 Greg Kroah-Hartman 提交于
Jens writes: "Just a single fix in this pull request, fixing a regression in /proc/diskstats caused by the unification of timestamps." * tag 'for-linus-20180922' of git://git.kernel.dk/linux-block: block: use nanosecond resolution for iostat
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Greg Kroah-Hartman 提交于
Thomas writes: "A set of fixes for x86: - Resolve the kvmclock regression on AMD systems with memory encryption enabled. The rework of the kvmclock memory allocation during early boot results in encrypted storage, which is not shareable with the hypervisor. Create a new section for this data which is mapped unencrypted and take care that the later allocations for shared kvmclock memory is unencrypted as well. - Fix the build regression in the paravirt code introduced by the recent spectre v2 updates. - Ensure that the initial static page tables cover the fixmap space correctly so early console always works. This worked so far by chance, but recent modifications to the fixmap layout can - depending on kernel configuration - move the relevant entries to a different place which is not covered by the initial static page tables. - Address the regressions and issues which got introduced with the recent extensions to the Intel Recource Director Technology code. - Update maintainer entries to document reality" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Expand static page table for fixmap space MAINTAINERS: Add X86 MM entry x86/intel_rdt: Add Reinette as co-maintainer for RDT MAINTAINERS: Add Borislav to the x86 maintainers x86/paravirt: Fix some warning messages x86/intel_rdt: Fix incorrect loop end condition x86/intel_rdt: Fix exclusive mode handling of MBA resource x86/intel_rdt: Fix incorrect loop end condition x86/intel_rdt: Do not allow pseudo-locking of MBA resource x86/intel_rdt: Fix unchecked MSR access x86/intel_rdt: Fix invalid mode warning when multiple resources are managed x86/intel_rdt: Global closid helper to support future fixes x86/intel_rdt: Fix size reporting of MBA resource x86/intel_rdt: Fix data type in parsing callbacks x86/kvm: Use __bss_decrypted attribute in shared variables x86/mm: Add .bss..decrypted section to hold shared variables
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Greg Kroah-Hartman 提交于
Thomas writes: "- Provide a strerror_r wrapper so lib/bpf can be built on systems without _GNU_SOURCE - Unbreak the man page generator when building out of tree" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf Documentation: Fix out-of-tree asciidoctor man page generation tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Greg Kroah-Hartman 提交于
Thomas writes: "Make the EFI arm stub device tree loader default on to unbreak existing EFI boot loaders which do not have DTB support." * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to y
-
- 22 9月, 2018 2 次提交
-
-
由 Omar Sandoval 提交于
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a7775 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: NKlaus Kusche <klaus.kusche@computerix.info> Signed-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Greg Kroah-Hartman 提交于
Linus writes: "Pin control fixes for v4.19: - Two fixes for the Intel pin controllers than cause problems on laptops." * tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: Do pin translation in other GPIO operations as well pinctrl: cannonlake: Fix gpio base for GPP-E
-
- 21 9月, 2018 20 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Greg Kroah-Hartman 提交于
Paolo writes: "It's mostly small bugfixes and cleanups, mostly around x86 nested virtualization. One important change, not related to nested virtualization, is that the ability for the guest kernel to trap CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is now masked by default. This is because the feature is detected through an MSR; a very bad idea that Intel seems to like more and more. Some applications choke if the other fields of that MSR are not initialized as on real hardware, hence we have to disable the whole MSR by default, as was the case before Linux 4.12." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits) KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs kvm: selftests: Add platform_info_test KVM: x86: Control guest reads of MSR_PLATFORM_INFO KVM: x86: Turbo bits in MSR_PLATFORM_INFO nVMX x86: Check VPID value on vmentry of L2 guests nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2 KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv KVM: VMX: check nested state and CR4.VMXE against SMM kvm: x86: make kvm_{load|put}_guest_fpu() static x86/hyper-v: rename ipi_arg_{ex,non_ex} structures KVM: VMX: use preemption timer to force immediate VMExit KVM: VMX: modify preemption timer bit only when arming timer KVM: VMX: immediately mark preemption timer expired only for zero value KVM: SVM: Switch to bitmap_zalloc() KVM/MMU: Fix comment in walk_shadow_page_lockless_end() kvm: selftests: use -pthread instead of -lpthread KVM: x86: don't reset root in kvm_mmu_setup() kvm: mmu: Don't read PDPTEs when paging is not enabled x86/kvm/lapic: always disable MMIO interface in x2APIC mode KVM: s390: Make huge pages unavailable in ucontrol VMs ...
-
git://git.infradead.org/linux-ubifs由 Greg Kroah-Hartman 提交于
Richard writes: "This pull request contains fixes for UBIFS: - A wrong UBIFS assertion in mount code - Fix for a NULL pointer deref in mount code - Revert of a bad fix for xattrs" * tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs: Revert "ubifs: xattr: Don't operate on deleted inodes" ubifs: drop false positive assertion ubifs: Check for name being NULL while mounting
-
git://git.kernel.dk/linux-block由 Greg Kroah-Hartman 提交于
Jens writes: "Storage fixes for 4.19-rc5 - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft) - NVMe pull request from Christoph, and a single ANA log page fix (Hannes) - Regression fix for libata qd32 support, where we trigger an illegal active command transition. This fixes a CD-ROM detection issue that was reported, but could also trigger premature completion of the internal tag (me)" * tag 'for-linus-20180920' of git://git.kernel.dk/linux-block: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl libata: mask swap internal and hardware tag nvme: count all ANA groups for ANA Log page
-
git://anongit.freedesktop.org/drm/drm由 Greg Kroah-Hartman 提交于
David writes: "drm fixes for 4.19-rc5: - core: fix debugfs for atomic, fix the check for atomic for non-modesetting drivers - amdgpu: adds a new PCI id, some kfd fixes and a sdma fix - i915: a bunch of GVT fixes. - vc4: scaling fix - vmwgfx: modesetting fixes and a old buffer eviction fix - udl: framebuffer destruction fix - sun4i: disable on R40 fix until next kernel - pl111: NULL termination on table fix" * tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9 drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 drm/vmwgfx: Fix buffer object eviction drm/vmwgfx: Don't impose STDU limits on framebuffer size drm/vmwgfx: limit mode size for all display unit to texture_max drm/vmwgfx: limit screen size to stdu_max during check_modeset drm/vmwgfx: don't check for old_crtc_state enable status drm/amdgpu: add new polaris pci id drm: sun4i: drop second PLL from A64 HDMI PHY drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers. drm/i915/gvt: clear ggtt entries when destroy vgpu drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler drm/i915/gvt: Init PHY related registers for BXT drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation drm/fb-helper: Remove set but not used variable 'connector_funcs' drm: udl: Destroy framebuffer only if it was initialized drm/sun4i: Remove R40 display pipeline compatibles drm/pl111: Make sure of_device_id tables are NULL terminated ...
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A few fixes for 4.19: - Add a new polaris pci id - KFD fixes for raven and gfx7 Signed-off-by: NDave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920155850.5455-1-alexander.deucher@amd.com
-
git://people.freedesktop.org/~thomash/linux由 Dave Airlie 提交于
A couple of modesetting fixes and a fix for a long-standing buffer-eviction problem cc'd stable. Signed-off-by: NDave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920063935.35492-1-thellstrom@vmware.com
-
由 Feng Tang 提交于
We met a kernel panic when enabling earlycon, which is due to the fixmap address of earlycon is not statically setup. Currently the static fixmap setup in head_64.S only covers 2M virtual address space, while it actually could be in 4M space with different kernel configurations, e.g. when VSYSCALL emulation is disabled. So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2, and add a build time check to ensure that the fixmap is covered by the initial static page tables. Fixes: 1ad83c85 ("x86_64,vsyscall: Make vsyscall emulation configurable") Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: Nkernel test robot <rong.a.chen@intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts) Cc: H Peter Anvin <hpa@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com
-
由 Junxiao Bi 提交于
While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Roman Gushchin 提交于
9092c71b ("mm: use sc->priority for slab shrink targets") changed the way that the target slab pressure is calculated and made it priority-based: delta = freeable >> priority; delta *= 4; do_div(delta, shrinker->seeks); The problem is that on a default priority (which is 12) no pressure is applied at all, if the number of potentially reclaimable objects is less than 4096 (1<<12). This causes the last objects on slab caches of no longer used cgroups to (almost) never get reclaimed. It's obviously a waste of memory. It can be especially painful, if these stale objects are holding a reference to a dying cgroup. Slab LRU lists are reparented on memcg offlining, but corresponding objects are still holding a reference to the dying cgroup. If we don't scan these objects, the dying cgroup can't go away. Most likely, the parent cgroup hasn't any directly charged objects, only remaining objects from dying children cgroups. So it can easily hold a reference to hundreds of dying cgroups. If there are no big spikes in memory pressure, and new memory cgroups are created and destroyed periodically, this causes the number of dying cgroups grow steadily, causing a slow-ish and hard-to-detect memory "leak". It's not a real leak, as the memory can be eventually reclaimed, but it could not happen in a real life at all. I've seen hosts with a steadily climbing number of dying cgroups, which doesn't show any signs of a decline in months, despite the host is loaded with a production workload. It is an obvious waste of memory, and to prevent it, let's apply a minimal pressure even on small shrinker lists. E.g. if there are freeable objects, let's scan at least min(freeable, scan_batch) objects. This fix significantly improves a chance of a dying cgroup to be reclaimed, and together with some previous patches stops the steady growth of the dying cgroups number on some of our hosts. Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com Fixes: 9092c71b ("mm: use sc->priority for slab shrink targets") Signed-off-by: NRoman Gushchin <guro@fb.com> Acked-by: NRik van Riel <riel@surriel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 YueHaibing 提交于
Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joel Fernandes (Google) 提交于
Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.orgSigned-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Reviewed-by: NNeilBrown <neilb@suse.com> Suggested-by: NNeilBrown <neilb@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dominique Martinet 提交于
The 'm' kcore_list item could point to kclist_head, and it is incorrect to look at m->addr / m->size in this case. There is no choice but to run through the list of entries for every address if we did not find any entry in the previous iteration Reset 'm' to NULL in that case at Omar Sandoval's suggestion. [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1536100702-28706-1-git-send-email-asmadeus@codewreck.org Fixes: bf991c22 ("proc/kcore: optimize multiple page reads") Signed-off-by: NDominique Martinet <asmadeus@codewreck.org> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@osandov.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: James Morse <james.morse@arm.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pasha Tatashin 提交于
Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f ("mm: relax deferred struct page requirements") Signed-off-by: NPavel Tatashin <pavel.tatashin@microsoft.com> Reported-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 KJ Tsanaktsidis 提交于
Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0 ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: NKJ Tsanaktsidis <ktsanaktsidis@zendesk.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Thomas Gleixner 提交于
Dave, Andy and Peter are de facto overseing the mm parts of X86. Add an explicit maintainers entry. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NIngo Molnar <mingo@kernel.org>
-
由 Fenghua Yu 提交于
Reinette Chatre is doing great job on enabling pseudo-locking and other features in RDT. Add her as co-maintainer for RDT. Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NReinette Chatre <reinette.chatre@intel.com> Cc: "H Peter Anvin" <hpa@zytor.com> Cc: "Tony Luck" <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1537472228-221799-1-git-send-email-fenghua.yu@intel.com
-
由 Richard Weinberger 提交于
This reverts commit 11a6fc3d. UBIFS wants to assert that xattr operations are only issued on files with positive link count. The said patch made this operations return -ENOENT for unlinked files such that the asserts will no longer trigger. This was wrong since xattr operations are perfectly fine on unlinked files. Instead the assertions need to be fixed/removed. Cc: <stable@vger.kernel.org> Fixes: 11a6fc3d ("ubifs: xattr: Don't operate on deleted inodes") Reported-by: NKoen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Sascha Hauer 提交于
The following sequence triggers ubifs_assert(c, c->lst.taken_empty_lebs > 0); at the end of ubifs_remount_fs(): mount -t ubifs /dev/ubi0_0 /mnt echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error umount /mnt mount -t ubifs -o ro /dev/ubix_y /mnt mount -o remount,ro /mnt The resulting UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161) is a false positive. In the case above c->lst.taken_empty_lebs has never been changed from its initial zero value. This will only happen when the deferred recovery is done. Fix this by doing the assertion only when recovery has been done already. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Richard Weinberger 提交于
The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Liran Alon 提交于
The handlers of IOCTLs in kvm_arch_vcpu_ioctl() are expected to set their return value in "r" local var and break out of switch block when they encounter some error. This is because vcpu_load() is called before the switch block which have a proper cleanup of vcpu_put() afterwards. However, KVM_{GET,SET}_NESTED_STATE IOCTLs handlers just return immediately on error without performing above mentioned cleanup. Thus, change these handlers to behave as expected. Fixes: 8fcc4b59 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Reviewed-by: NMark Kanda <mark.kanda@oracle.com> Reviewed-by: NPatrick Colp <patrick.colp@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 9月, 2018 1 次提交
-
-
由 Yong Zhao 提交于
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NYong Zhao <Yong.Zhao@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-