rbd_dev->disk tear down vs rbd_watch_cb() race shouldn't be a problem
anymore thanks to EXISTS and REMOVING checks in rbd_dev_update_size().
A similar race could occur on "rbd map", see commit 811c6688
("rbd: fix rbd map vs notify races").
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

... to simplify error handling in do_rbd_add().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

No reason to hide CephFS-specific features in the rbd case.  Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

If the netdev is accessed before the urbs are initialized,
there will be NULL pointer dereferences. That is avoided by
registering it when it is fully initialized.

This case occurs e.g. if dhcpcd is running in the background
and the device is probed, either after insmod hso or
when the device appears on the usb bus.

A backtrace is the following:

[ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap
[ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem
[ 1357.574096] usb 1-2: Manufacturer: Option N.V.
[ 1357.685882] hso 1-2:1.5: Not our interface
[ 1460.886352] hso: unloaded
[ 1460.889984] usbcore: deregistering interface driver hso
[ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless
[ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030
[ 1513.887664] hso 1-2:1.5: Not our interface
[ 1513.906890] usbcore: registered new interface driver hso
[ 1513.937988] pgd = ecdec000
[ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000
[ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007
[ 1514.037384]  bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso]
[ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G        W       4.11.0-rc8-letux+ #1
[ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 1514.077758] task: ee748240 task.stack: ecdd6000
[ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso]
[ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso]
[ 1514.093231] pc : [<bf79c304>]    lr : [<bf79ced8>]    psr: a00f0013
sp : ecdd7e20  ip : 00000000  fp : ffffffff
[ 1514.105316] r10: 00000000  r9 : ed0e080c  r8 : ecd8fe2c
[ 1514.110839] r7 : bf79cef4  r6 : ecd8fe00  r5 : 00000000  r4 : ed0dbd80
[ 1514.117706] r3 : 00000000  r2 : c0020c80  r1 : 00000000  r0 : ecdb7800
[ 1514.124572] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[ 1514.132110] Control: 10c5387d  Table: acdec019  DAC: 00000051
[ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218)
[ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000)
[ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000
[ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958
[ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090
[ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800
[ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000
[ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914
[ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948
[ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654
[ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0
[ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240
[ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000
[ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4
[ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091
[ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858
[ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000
[ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso])
[ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4)
[ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130)
[ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48)
[ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714)
[ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308)
[ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34)
[ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c)
[ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74)
[ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c)
[ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030)
[ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]---
Reported-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NAndreas Kemnade <andreas@kemnade.info>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On slave list updates, the bonding driver computes its hard_header_len
as the maximum of all enslaved devices's hard_header_len.
If the slave list is empty, e.g. on last enslaved device removal,
ETH_HLEN is used.

Since the bonding header_ops are set only when the first enslaved
device is attached, the above can lead to header_ops->create()
being called with the wrong skb headroom in place.

If bond0 is configured on top of ipoib devices, with the
following commands:

ifup bond0
for slave in $BOND_SLAVES_LIST; do
	ip link set dev $slave nomaster
done
ping -c 1 <ip on bond0 subnet>

we will obtain a skb_under_panic() with a similar call trace:
	skb_push+0x3d/0x40
	push_pseudo_header+0x17/0x30 [ib_ipoib]
	ipoib_hard_header+0x4e/0x80 [ib_ipoib]
	arp_create+0x12f/0x220
	arp_send_dst.part.19+0x28/0x50
	arp_solicit+0x115/0x290
	neigh_probe+0x4d/0x70
	__neigh_event_send+0xa7/0x230
	neigh_resolve_output+0x12e/0x1c0
	ip_finish_output2+0x14b/0x390
	ip_finish_output+0x136/0x1e0
	ip_output+0x76/0xe0
	ip_local_out+0x35/0x40
	ip_send_skb+0x19/0x40
	ip_push_pending_frames+0x33/0x40
	raw_sendmsg+0x7d3/0xb50
	inet_sendmsg+0x31/0xb0
	sock_sendmsg+0x38/0x50
	SYSC_sendto+0x102/0x190
	SyS_sendto+0xe/0x10
	do_syscall_64+0x67/0x180
	entry_SYSCALL64_slow_path+0x25/0x25

This change addresses the issue avoiding updating the bonding device
hard_header_len when the slaves list become empty, forbidding to
shrink it below the value used by header_ops->create().

The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large
hard_header_len") but the panic can be triggered only since
commit fc791b63 ("IB/ipoib: move back IB LL address into the hard
header").
Reported-by: NNorbert P <noe@physik.uzh.ch>
Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len")
Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tony Lindgren reports a kernel oops that resulted from my compile-time
fix on the default config. This shows two problems:

a) configurations that did not already enable PTP_1588_CLOCK will
   now miss the cpts driver

b) when cpts support is disabled, the driver crashes. This is a
   preexisting problem that we did not notice before my patch.

While the second problem is still being investigated, this modifies
the dependencies again, getting us back to the original state, with
another 'select NET_PTP_CLASSIFY' added in to avoid the original
link error we got, and the 'depends on POSIX_TIMERS' to hide
the CPTS support when turning it on would be useless.

Cc: stable@vger.kernel.org # 4.11 needs this
Fixes: 07fef362 ("cpsw/netcp: cpts depends on posix_timers")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the base driver is enabled but all SoC specific drivers are turned
off, we now get a build error after code was added to always refer to the
clk gates:

drivers/clk/built-in.o: In function `ccu_pll_notifier_cb':
:(.text+0x154f8): undefined reference to `ccu_gate_helper_disable'
:(.text+0x15504): undefined reference to `ccu_gate_helper_enable'

This changes the Kconfig to always require the gate code to be built-in
when CONFIG_SUNXI_CCU is set.

Fixes: 02ae2bc6 ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

We call skb_cow_data, which is good anyway to ensure we can actually
modify the skb as such (another error from prior). Now that we have the
number of fragments required, we can safely allocate exactly that amount
of memory.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 99f81afc.

It was papering over the real problem, which is fixed by commit
f555f34f ("net: phy: fix auto-negotiation stall due to unavailable
interrupt")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet
cable was plugged before the Ethernet interface was brought up.

The patch trigger PHY state machine to update link state if PHY was requested to
do auto-negotiation and auto-negotiation complete flag already set.

During power-up cycle the PHY do auto-negotiation, generate interrupt and set
auto-negotiation complete flag. Interrupt is handled by PHY state machine but
doesn't update link state because PHY is in PHY_READY state. After some time
MAC bring up, start and request PHY to do auto-negotiation. If there are no new
settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation.
PHY continue to stay in auto-negotiation complete state and doesn't fire
interrupt. At the same time PHY state machine expect that PHY started
auto-negotiation and is waiting for interrupt from PHY and it won't get it.

Fixes: 321beec5 ("net: phy: Use interrupts when available in NOLINK state")
Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com>
Cc: stable <stable@vger.kernel.org> # v4.9+
Tested-by: NRoger Quadros <rogerq@ti.com>
Tested-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DCBX app_data array is initialized with the incorrect values for
personality field. This would  prevent offloaded protocols from
honoring the PFC.
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

My change (introduced in 4.11) to use find_first_clear_bit
incorrectly assumed that the size argument was words, not bits.
The effect was only a small limited number of the available send
sections were being actually used. This can cause performance loss
with some workloads.

Since map_words is now used only during initialization, it can
be on stack instead of in per-device data.

Fixes: b58a1858 ("netvsc: simplify get next send section")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

keep tty driver until usb driver is unregistered
rmmod hso
produces traces like this without that:

[40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap
[40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800
[40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem
[40261.880279] usb 2-2: Manufacturer: Option N.V.
[40262.021270] hso 2-2:1.5: Not our interface
[40265.556945] hso: unloaded
[40265.559875] usbcore: deregistering interface driver hso
[40265.595947] Unable to handle kernel NULL pointer dereference at virtual address 00000033
[40265.604522] pgd = ecb14000
[40265.611877] [00000033] *pgd=00000000
[40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect
[40265.698211]  sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso]
[40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6
[40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[40265.736938] task: ecb81100 task.stack: ecb82000
[40265.741729] PC is at cdev_del+0xc/0x2c
[40265.745666] LR is at tty_unregister_device+0x40/0x50
[40265.750915] pc : [<c027472c>]    lr : [<c04b3ecc>]    psr: 600b0113
sp : ecb83ea8  ip : eca4f898  fp : 00000000
[40265.763000] r10: 00000000  r9 : 00000000  r8 : 00000001
[40265.768493] r7 : eca4f800  r6 : 00000003  r5 : 00000000  r4 : ffffffff
[40265.775360] r3 : c1458d54  r2 : 00000000  r1 : 00000004  r0 : ffffffff
[40265.782257] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[40265.789764] Control: 10c5387d  Table: acb14019  DAC: 00000051
[40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218)
[40265.802062] Stack: (0xecb83ea8 to 0xecb84000)
[40265.806640] 3ea0:                   ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec
[40265.815277] 3ec0: eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04
[40265.823883] 3ee0: eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4
[40265.832519] 3f00: ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081
[40265.841125] 3f20: c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88
[40265.849731] 3f40: bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368
[40265.858367] 3f60: ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4
[40265.866973] 3f80: ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220
[40265.875579] 3fa0: bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800
[40265.884216] 3fc0: 7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000
[40265.892822] 3fe0: b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff
[40265.901458] [<c027472c>] (cdev_del) from [<c04b3ecc>] (tty_unregister_device+0x40/0x50)
[40265.909942] [<c04b3ecc>] (tty_unregister_device) from [<bf7327ec>] (hso_free_interface+0x80/0x144 [hso])
[40265.919982] [<bf7327ec>] (hso_free_interface [hso]) from [<bf7328bc>] (hso_disconnect+0xc/0x18 [hso])
[40265.929718] [<bf7328bc>] (hso_disconnect [hso]) from [<c05a9a04>] (usb_unbind_interface+0x84/0x200)
[40265.939239] [<c05a9a04>] (usb_unbind_interface) from [<c04e6960>] (device_release_driver_internal+0x138/0x1cc)
[40265.949798] [<c04e6960>] (device_release_driver_internal) from [<c04e6a60>] (driver_detach+0x60/0x6c)
[40265.959503] [<c04e6a60>] (driver_detach) from [<c04e5d94>] (bus_remove_driver+0x64/0x8c)
[40265.968017] [<c04e5d94>] (bus_remove_driver) from [<c05a8f88>] (usb_deregister+0x5c/0xb8)
[40265.976654] [<c05a8f88>] (usb_deregister) from [<c01c4afc>] (SyS_delete_module+0x160/0x1dc)
[40265.985443] [<c01c4afc>] (SyS_delete_module) from [<c0107040>] (ret_fast_syscall+0x0/0x1c)
[40265.994171] Code: c1458d54 e59f3020 e92d4010 e1a04000 (e5941034)
[40266.016693] ---[ end trace 9d5ac43c7e41075c ]---
Signed-off-by: NAndreas Kemnade <andreas@kemnade.info>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In functions team_nl_send_port_list_get() and
team_nl_send_options_get(), pointer skb keeps the return value of
nlmsg_new(). When the call to genlmsg_put() fails, the memory is not
freed(). This will result in memory leak bugs.

Fixes: 9b00cf2d ("team: implement multipart netlink messages for options transfers")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: dd248f1b ("sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC")
Reported-by: NPatrick Talbert <ptalbert@redhat.com>
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a parent macvlan device is destroyed we end up purging its
broadcast queue without dropping the device reference count on
the packet source device.  This causes the source device to linger.

This patch drops that reference count.

Fixes: 260916df ("macvlan: Fix potential use-after free for...")
Reported-by: NJoe Ghalam <Joe.Ghalam@dell.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.
Signed-off-by: NRoman Spychała <roed@onet.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocate buffers on HEAP instead of STACK for local structures
that are to be sent using usb_control_msg().
Signed-off-by: NMaksim Salau <maksim.salau@gmail.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.8
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adds a text line in the help section of the CAN_PEAK_USB
config item describing the support of the PCAN-USB X6 adapter, which is
already included in the Kernel since 4.9.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adds the support of the PCAN-Chip USB, a stamp module for
customer hardware designs, which communicates via USB 2.0 with the
hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B
as well as CAN FD. The physical CAN connection is determined by external
wiring. The Stamp module with its single-sided mounting and plated
half-holes is suitable for automatic assembly.

Note that the chip is equipped with the same logic than the PCAN-USB FD.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.
Reported-by: NPaweł Bylica <chfast@gmail.com>
Tested-by: NEd Bordin <edbordin@gmail.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The 58xx devices (Northstar Plus) do actually have their CPU port wired
at port 8, it was unfortunately set to port 5 (B53_CPU_PORT_25) which is
incorrect, since that is the second possible management port.

Fixes: 991a36bb ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch")
Reported-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the correct software reset sequence for 58xx devices by
setting all 3 reset bits and polling for the SW_RST bit to clear itself
without a given timeout. We cannot use is58xx() here because that would
also include the 7445/7278 Starfighter 2 which have their own driver
doing the reset earlier on due to the HW specific integration.

Fixes: 991a36bb ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need
to make sure that the IMP/CPU port is included in the forwarding
decision.

Without this change, switching between non-management ports would work,
but not between management ports and non-management ports thus breaking
the default state in which DSA switch are brought up.

Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Reported-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If skb_put_padto() fails then it frees the skb.  I shifted that code
up a bit to make my error handling a little simpler.

Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While this may appear as a humdrum one line change, it's actually quite
important. An sk_buff stores data in three places:

1. A linear chunk of allocated memory in skb->data. This is the easiest
   one to work with, but it precludes using scatterdata since the memory
   must be linear.
2. The array skb_shinfo(skb)->frags, which is of maximum length
   MAX_SKB_FRAGS. This is nice for scattergather, since these fragments
   can point to different pages.
3. skb_shinfo(skb)->frag_list, which is a pointer to another sk_buff,
   which in turn can have data in either (1) or (2).

The first two are rather easy to deal with, since they're of a fixed
maximum length, while the third one is not, since there can be
potentially limitless chains of fragments. Fortunately dealing with
frag_list is opt-in for drivers, so drivers don't actually have to deal
with this mess. For whatever reason, macsec decided it wanted pain, and
so it explicitly specified NETIF_F_FRAGLIST.

Because dealing with (1), (2), and (3) is insane, most users of sk_buff
doing any sort of crypto or paging operation calls a convenient function
called skb_to_sgvec (which happens to be recursive if (3) is in use!).
This takes a sk_buff as input, and writes into its output pointer an
array of scattergather list items. Sometimes people like to declare a
fixed size scattergather list on the stack; othertimes people like to
allocate a fixed size scattergather list on the heap. However, if you're
doing it in a fixed-size fashion, you really shouldn't be using
NETIF_F_FRAGLIST too (unless you're also ensuring the sk_buff and its
frag_list children arent't shared and then you check the number of
fragments in total required.)

Macsec specifically does this:

        size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1);
        tmp = kmalloc(size, GFP_ATOMIC);
        *sg = (struct scatterlist *)(tmp + sg_offset);
	...
        sg_init_table(sg, MAX_SKB_FRAGS + 1);
        skb_to_sgvec(skb, sg, 0, skb->len);

Specifying MAX_SKB_FRAGS + 1 is the right answer usually, but not if you're
using NETIF_F_FRAGLIST, in which case the call to skb_to_sgvec will
overflow the heap, and disaster ensues.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We dereference "skb" to get "skb->len" so we should probably do that
step before freeing the skb.

Fixes: eea221ce ("tc35815 driver update (take 2)")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have observed a sudden spike in rx/tx_packets and rx/tx_bytes
reported under /proc/net/dev.  There is a race in mlx5e_update_stats()
and some of the get-stats functions (the one that we hit is the
mlx5e_get_stats() which is called by ndo_get_stats64()).

In particular, the very first thing mlx5e_update_sw_counters()
does is 'memset(s, 0, sizeof(*s))'.  For example, if mlx5e_get_stats()
is unlucky at one point, rx_bytes and rx_packets could be 0.  One second
later, a normal (and much bigger than 0) value will be reported.

This patch is to use a 'struct mlx5e_sw_stats temp' to avoid
a direct memset zero on priv->stats.sw.

mlx5e_update_vport_counters() has a similar race.  Hence, addressed
together.  However, memset zero is removed instead because
it is not needed.

I am lucky enough to catch this 0-reset in rx multicast:
eth0: 41457665   76804   70    0    0    70          0     47085 15586634   87502    3    0    0     0       3          0
eth0: 41459860   76815   70    0    0    70          0     47094 15588376   87516    3    0    0     0       3          0
eth0: 41460577   76822   70    0    0    70          0         0 15589083   87521    3    0    0     0       3          0
eth0: 41463293   76838   70    0    0    70          0     47108 15595872   87538    3    0    0     0       3          0
eth0: 41463379   76839   70    0    0    70          0     47116 15596138   87539    3    0    0     0       3          0

v2: Remove memset zero from mlx5e_update_vport_counters()
v1: Use temp and memcpy

Fixes: 9218b44d ("net/mlx5e: Statistics handling refactoring")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Suggested-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size
of the table, regardless of the amount of entries in it.
Existing code does not do that, and this breaks all usage of ethtool -N
or -n without explicit location, with this error:
rmgr: Invalid RX class rules table size: Success

Set info->data to the table size.

Tested:
ethtool -n ens8
ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1
ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55
ethtool -n ens8
ethtool -N ens8 delete 1023
ethtool -N ens8 delete 55

Fixes: f913a72a ("net/mlx5e: Add support to get ethtool flow rules")
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

RX packet headers are meant to be contained in SKB linear part,
and chose a threshold of 128.
It turns out this is not enough, i.e. for IPv6 packet over VxLAN.
In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes,
and 86 bytes for TCP/IPv6. In total 136 bytes that is more than
current 128 bytes. In this case expand header flow is reached.
The warning in skb_try_coalesce() caused by a wrong truesize
was already fixed here:
commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()").
Still, we prefer to totally avoid the expand header flow for performance reasons.
Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found.

Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When UAR is released, we deallocate the device resource, but
don't unmmap the UAR mapping memory.
Fix the leak by unmapping this memory.

Fixes: a6d51b68 ('net/mlx5: Introduce blue flame register allocator)
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Otherwise the code that fills the ipv6 encapsulation headers could be writing
beyond the allocated headers buffer.

Fixes: ce99f6b9 ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Otherwise the code that fills the ipv4 encapsulation headers could be writing
beyond the allocated headers buffer.

Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

On ConnectX5 the wqe inline mode is "none" and hence the FW
reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED.

Fix our devlink callbacks to deal with that on get and set.

Also fix the tc flow parsing code not to fail anything when
inline isn't required.

Fixes: bffaa916 ('net/mlx5: E-Switch, Add control for inline mode')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

If FW is stuck in initializing state we will skip the driver load, but
current error handling flow doesn't clean previously allocated command
interface resources.

Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup')
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

We can use skb_cow_head() to properly deal with clones,
especially the ones coming from TCP stack that allow their head being
modified. This avoids a copy.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: 4a476bd6 ("usbnet: New driver for QinHeng CH9200 devices")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: cc28a20e ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>