Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 29 4月, 2011 4 次提交
  3. 28 4月, 2011 2 次提交
    • I
      perf stat: Fix compatibility behavior · ede70290
      由 Ingo Molnar 提交于 
      Instead of failing on an unknown event, when new perf stat is run on
older kernels:

  $ ./perf stat true
  Error: open_counter returned with 22 (Invalid argument). /bin/dmesg
  may provide additional information.

  Fatal: Not all events could be opened.

Just ignore EINVAL and ENOSYS, we'll print the results as not counted:

 Performance counter stats for 'true':

          0.239483 task-clock               #    0.493 CPUs utilized
                 0 context-switches         #    0.000 M/sec
                 0 CPU-migrations           #    0.000 M/sec
                86 page-faults              #    0.359 M/sec
           704,766 cycles                   #    2.943 GHz
     <not counted> stalled-cycles
           381,961 instructions             #    0.54  insns per cycle
            69,626 branches                 #  290.735 M/sec
             4,594 branch-misses            #    6.60% of all branches

        0.000485883  seconds time elapsed

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio5hjpn3dsrm@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
      ede70290
    • I
      perf stat: Add --sync/-S option · f9cef0a9
      由 Ingo Molnar 提交于 
      --sync will tell perf stat to run sync() before starting a command.

This allows IO-heavy tests to be used with --repeat, without one
iteration impacting the other.

Elapsed time will stabilize for example:

  before:        3.971525714  seconds time elapsed  ( +-  8.56% )
  after:         3.211098537  seconds time elapsed  ( +-  1.52% )

So measurements will be more accurate.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn1dsrm@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
      f9cef0a9
  5. 27 4月, 2011 11 次提交
  7. 15 4月, 2011 1 次提交
  9. 15 3月, 2011 1 次提交
  11. 16 2月, 2011 1 次提交
    • S
      perf tool: Add cgroup support · 023695d9
      由 Stephane Eranian 提交于 
      This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.

The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.

Example:

$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
 Performance counter stats for 'sleep 1':

      2,368,667,414  cycles                   test1
      2,369,661,459  cycles
      <not counted>  cycles                   test2

        1.001856890  seconds time elapsed
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      023695d9
  13. 02 2月, 2011 1 次提交
  15. 31 1月, 2011 1 次提交
    • A
      perf evlist: Store pointer to the cpu and thread maps · 7e2ed097
      由 Arnaldo Carvalho de Melo 提交于 
      So that we don't have to pass it around to the several methods that
needs it, simplifying usage.

There is one case where we don't have the thread/cpu map in advance,
which is in the parsing routines used by top, stat, record, that we have
to wait till all options are parsed to know if a cpu or thread list was
passed to then create those maps.

For that case consolidate the cpu and thread map creation via
perf_evlist__create_maps() out of the code in top and record, while also
providing a perf_evlist__set_maps() for cases where multiple evlists
share maps or for when maps that represent CPU sockets, for instance,
get crafted out of topology information or subsets of threads in a
particular application are to be monitored, providing more granularity
in specifying which cpus and threads to monitor.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7e2ed097
  17. 24 1月, 2011 1 次提交
    • A
      perf threads: Move thread_map to separate file · fd78260b
      由 Arnaldo Carvalho de Melo 提交于 
      To untangle it from struct thread handling, that is tied to symbols, etc.

Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fd78260b
  19. 23 1月, 2011 4 次提交
    • A
      perf evsel: Allow specifying if the inherit bit should be set · 9d04f178
      由 Arnaldo Carvalho de Melo 提交于 
      As this is a per-cpu attribute, we can't set it up in advance and use it
for all the calls.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9d04f178
    • A
      perf evsel: Support event groups · f08199d3
      由 Arnaldo Carvalho de Melo 提交于 
      The perf_evsel__open now have an extra boolean argument specifying if
event grouping is desired.

The first file descriptor created on a CPU becomes the group leader.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f08199d3
    • A
      perf evsel: Introduce perf_evlist · 361c99a6
      由 Arnaldo Carvalho de Melo 提交于 
      Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.

There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.

Use option->value to pass the evsel_list to parse_{events,filters}.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      361c99a6
    • A
      perf tools: Fix 64 bit integer format strings · 9486aa38
      由 Arnaldo Carvalho de Melo 提交于 
      Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: NDenis Kirjanov <dkirjanov@kernel.org>
Tested-by: NDenis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9486aa38
  21. 11 1月, 2011 1 次提交
    • A
      perf evsel: Fix order of event list deletion · bd3bfe9e
      由 Arnaldo Carvalho de Melo 提交于 
      We need to defer calling perf_evsel_list__delete() till after atexit
registered routines, because we need to traverse the events being
recorded at that time at least on 'perf record'.

This fixes the problem reported by Thomas Renninger where cmd_record
called by cmd_timechart would not write the tracing data to the perf.data
file header because the evsel_list at atexit (control+C on 'perf timechart
record') time would be empty, being already deleted by run_builtin(),
and thus 'perf timechart' when trying to process such perf.data file would
die with:

"no trace data in the file"

Problem introduced in 70d544d0.
Reported-by: NThomas Renninger <trenn@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bd3bfe9e
  23. 10 1月, 2011 1 次提交
    • D
      perf stat: better error message for unsupported events · 5a3446bc
      由 David Ahern 提交于 
      For unsupported events (e.g., H/W events when running in a VM)
perf stat currently fails with the error message:

      Error: open_counter returned with 2 (No such file or directory).
    /bin/dmesg may provide additional information.

      Fatal: Not all events could be opened.

dmesg is of no help and it is not clear as to why it fails to
open the counter. This patch changes the error message to

      Error: cache-misses event is not supported.
      Fatal: Not all events could be opened.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: a.p.zijlstra@chello.nl
LPU-Reference: <1294597272-17335-1-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5a3446bc
  25. 07 1月, 2011 1 次提交
    • L
      perf tools: Pass whole attr to event selectors · 23a2f3ab
      由 Lin Ming 提交于 
      Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      23a2f3ab
  27. 04 1月, 2011 8 次提交
    • A
      perf evsel: Use {cpu,thread}_map to shorten list of parameters · 86bd5e86
      由 Arnaldo Carvalho de Melo 提交于 
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      86bd5e86
    • A
      perf tools: Refactor all_tids to hold nr and the map · 5c98d466
      由 Arnaldo Carvalho de Melo 提交于 
      So that later, we can pass the thread_map instance instead of
(thread_num, thread_map) for things like perf_evsel__open and friends,
just like was done with cpu_map.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5c98d466
    • A
      perf tools: Refactor cpumap to hold nr and the map · 60d567e2
      由 Arnaldo Carvalho de Melo 提交于 
      So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map)
for things like perf_evsel__open and friends.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      60d567e2
    • A
      perf evsel: Introduce per cpu and per thread open helpers · 48290609
      由 Arnaldo Carvalho de Melo 提交于 
      Abstracting away the loops needed to create the various event fd handlers.

The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.

Comes out of the ad-hoc routines in builtin-stat, that now uses it.

Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      48290609
    • A
      perf evsel: Steal the counter reading routines from stat · c52b12ed
      由 Arnaldo Carvalho de Melo 提交于 
      Making them hopefully generic enough to be used in 'perf test',
well see.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c52b12ed
    • A
      perf evsel: Delete the event selectors at exit · 70d544d0
      由 Arnaldo Carvalho de Melo 提交于 
      Freeing all the possibly allocated resources, reducing complexity
on each tool exit path.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      70d544d0
    • A
      perf evsel: Adopt MATCH_EVENT macro from 'stat' · daec78a0
      由 Arnaldo Carvalho de Melo 提交于 
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      daec78a0
    • A
      perf tools: Introduce event selectors · 69aad6f1
      由 Arnaldo Carvalho de Melo 提交于 
      Out of ad-hoc code and global arrays with hard coded sizes.

This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.

[acme@felicio linux]$ size /tmp/perf.before
   text	   data	    bss	    dec	    hex	filename
1273776	  97384	5104416	6475576	 62cf38	/tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
   text	   data	    bss	    dec	    hex	filename
1275422	  97416	1392416	2765254	 2a31c6	/tmp/perf.new

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      69aad6f1
  29. 02 12月, 2010 2 次提交
    • S
      perf stat: Add csv-style output · d7470b6a
      由 Stephane Eranian 提交于 
      This patch adds an option (-x/--field-separator) to print counts using a
CSV-style output. The user can pass a custom separator. This makes it very easy
to import counts directly into your favorite spreadsheet without having to
write scripts.

Example:
$ perf stat --field-separator=,  -a -- sleep 1
4009.961740,task-clock-msecs
13,context-switches
2,CPU-migrations
189,page-faults
9596385684,cycles
3493659441,instructions
872897069,branches
41562,branch-misses
22424,cache-references
1289,cache-misses

Works also in non-aggregated mode:

$ perf stat -x ,  -a -A -- sleep 1
CPU0,1002.526168,task-clock-msecs
CPU1,1002.528365,task-clock-msecs
CPU2,1002.523360,task-clock-msecs
CPU3,1002.519878,task-clock-msecs
CPU0,1,context-switches
CPU1,5,context-switches
CPU2,5,context-switches
CPU3,6,context-switches
CPU0,0,CPU-migrations
CPU1,1,CPU-migrations
CPU2,0,CPU-migrations
CPU3,1,CPU-migrations
CPU0,2,page-faults
CPU1,6,page-faults
CPU2,9,page-faults
CPU3,174,page-faults
CPU0,2399439771,cycles
CPU1,2380369063,cycles
CPU2,2399142710,cycles
CPU3,2373161192,cycles
CPU0,872900618,instructions
CPU1,873030960,instructions
CPU2,872714525,instructions
CPU3,874460580,instructions
CPU0,221556839,branches
CPU1,218134342,branches
CPU2,218161730,branches
CPU3,218284093,branches
CPU0,18556,branch-misses
CPU1,1449,branch-misses
CPU2,3447,branch-misses
CPU3,12714,branch-misses
CPU0,8330,cache-references
CPU1,313844,cache-references
CPU2,47993728,cache-references
CPU3,826481,cache-references
CPU0,272,cache-misses
CPU1,5360,cache-misses
CPU2,1342193,cache-misses
CPU3,13992,cache-misses

This second version adds the ability to name a separator and uses
field-separator as the long option to be consistent with perf report.

Commiter note: Since we enabled --big-num by default in 201e0b06 and -x can't be
used with it, we need to notice if the user explicitely enabled or disabled -B,
add code to disable big_num if the user didn't explicitely set --big_num when
-x is used.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederik Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4cf68aa7.0fedd80a.5294.1203@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d7470b6a
    • A
      perf stat: Use --big-num format by default · 201e0b06
      由 Arnaldo Carvalho de Melo 提交于 
      [acme@mica linux]$ perf stat ls > /dev/null

 Performance counter stats for 'ls':

           1.512532  task-clock-msecs         #      0.801 CPUs
                  2  context-switches         #      0.001 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                241  page-faults              #      0.159 M/sec
          2,973,331  cycles                   #   1965.797 M/sec
          1,460,802  instructions             #      0.491 IPC
            314,642  branches                 #    208.023 M/sec
             18,475  branch-misses            #      5.872 %
      <not counted>  cache-references
      <not counted>  cache-misses

        0.001887676  seconds time elapsed

To get the previous behaviour just use --no-big-num:

[acme@mica linux]$ perf stat --no-big-num ls > /dev/null

 Performance counter stats for 'ls':

           1.468014  task-clock-msecs         #      0.795 CPUs
                  1  context-switches         #      0.001 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                241  page-faults              #      0.164 M/sec
            2900254  cycles                   #   1975.631 M/sec
            1437991  instructions             #      0.496 IPC
             310905  branches                 #    211.786 M/sec
              17912  branch-misses            #      5.761 %
      <not counted>  cache-references
      <not counted>  cache-misses

        0.001845435  seconds time elapsed

[acme@mica linux]$
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      201e0b06