- 16 10月, 2007 18 次提交
-
-
由 Trent Piepho 提交于
Turn a rather long lined for loop that is duplicated multiple times into a macro. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Trent Piepho 提交于
Add four mute controls for the analog output channels for cards that use an SPI DAC, like the SB0570 SB Live! 24-bit / Audigy SE. The Wolfson DAC doesn't support muting left/right so the controls are mono. The chip state struct gets a 32-byte array to act as a shadow of the spi dac registers. Only two registers are used for mute, but more would be needed for analog gain, de-emphasis, DAC power down, phase inversion, and other features. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
This patch fixes an off-by-one in a snd_assert() spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
There were some places I forgot to replace with snd_ctl_boolean_mono_info. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Patch submitted by Ctirad Fertr <c.fertr@volny.cz> Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Details: Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8176Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
The existing code for handling the 44.1 slot's volume has two problems: the volume is not affected by the 'Wave Playback Volume' mixer control, and the BUF441OUTVOL register, which is used to control the per- substream volume for this slot, uses a different scale than the gain fields of the other slots. This patch makes the BUF441OUTVOL register a shadow of the NATIVEDACOUTVOL register so that the Wave volume is consistent for all substreams. As a consequence of this, the per-substream PCM volume control gets no longer activated for the substream using this slot. The code for (de)activating the mixer control is moved from the open/close to the prepare/trigger_stop callbacks so that it is able to determine the substream's slot. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Hans-Christian Egtvedt 提交于
This patch adds support for the AT73C213 DAC using the misc Atmel SSC driver in I2S mode. The driver also requires a SPI to setup the registers and control volume. It has been tested with an AT32AP7000 on the ATSTK1000 development board. The driver should also work with any Atmel device with an SSC module supported by the Atmel SSC driver (atmel-ssc). The atmel-ssc driver is just submitted to the Linux kernel. Please see mail thread http://lkml.org/lkml/2007/7/16/32Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Hans-Christian Egtvedt 提交于
This patch adds SPI devices in the ALSA diretory, including the Kconfig and Makefile. Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Arnaud Patard 提交于
SND_S3C24XX_SOC_NEO1973_WM8753 depends on MACH_GTA01 but the Kconfig entry which is going to be merged is MACH_NEO1973_GTA01. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added helper functions for frequenty used callbacks: snd_ctl_boolean_mono_info() and snd_ctl_boolean_stereo_info() Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Notebook. Description: The .device=0x0008 chips have new, but different EMU32 in/out channels. Driver updated to make use of these EMU32 channels. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jesper Juhl 提交于
This patch cleans up duplicate includes in sound/core/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jesper Juhl 提交于
This patch cleans up duplicate includes in sound/soc/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jesper Juhl 提交于
This patch cleans up duplicate includes in sound/ppc/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Stephen Rothwell 提交于
sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 15 10月, 2007 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
deal with signedness of the stuff passed to set_bit() et.al. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 1 次提交
-
-
由 Kay Sievers 提交于
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 9月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Use seq_file for the proc file read/write of snd-page-alloc module. This automatically fixes bugs in the old proc code. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 8月, 2007 1 次提交
-
-
由 Georg Chini 提交于
Remove unnecessary sbus_dma_reset function and change sbus_dma_enable to avoid occasional system crashes when stopping recording. Signed-off-by: NGeorg Chini <georg.chini@triaton-webhosting.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2007 1 次提交
-
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2007 1 次提交
-
-
由 Trent Piepho 提交于
Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 29 7月, 2007 1 次提交
-
-
由 Eric Miao 提交于
due to CKEN_xxx definition and pxa_set_cken() change, the pxa27x ac97 cold reset is broken in ASoC, fixed to use bit index instead of bit mask Signed-off-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 7月, 2007 1 次提交
-
-
由 Adrian McMenamin 提交于
The current SH DMA API is somewhat broken, not correctly matching virtual channel to the correct SH DMAC. This wasn't noticeable when using g2 DMA for the sound driver - one channel 0 is as good as any other! - but caused the pvr2 driver to fail. This patch fixes the pvr2 problem and consequently fixes the sound driver to ensure it continues to function. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 7月, 2007 13 次提交
-
-
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
The recent fix for STAC92xx surround outputs broke the input pin setting for shared line-in and mic jacks. This patch fixes the breakage. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Nicola Fagnani 提交于
Basic audio support for the iMac 24'' model released on 09/2006, including headphone jack detection with automatic speaker muting. This iMac uses the Realtek ALC885 codec, not a Sigmatel one as in other models. Functionality has been tested for internal speakers, headphone and microphone. Signed-off-by: NNicola Fagnani <nicfagn@iol.it> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Without the proper model setting, the Asus P5LD2 rear outputs remain completely silent unlike other systems where the front speakers usually work. This patch adds the P5LD2 to the quirk table. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
This card is just a normal SB Live 24bit, but under a different marketing name. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed PM resume of cs46xx devices. It now restores properly the DSP image and kick-off the DSP. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matthew Ranostay 提交于
Added support for some boards with SPDIF in/out, and cleaned up the GPIO enable function. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Convert the snd_assert()s to simple if()s to prevent crashes when one of the timer instance ioctls is called before the file is bound to a timer device. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Yoann Padioleau 提交于
Parse error in ifdef or bad use of macro. Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
HP dx2200 and dx2250 use Micro-Star International (MSI) motherboards (models MS-7254 and MS-7297 respectively) with an ALC862 codec in threestack configuration. Adding this quirk allows correct 5.1 sound output in these systems. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Rename ALC888_HP_NETTLE and ALC888_HP_LUCKNOW models to the more generic names ALC888_6ST_HP and ALC888_3ST_HP since HP seems to be consistent in the wiring of their 3stack and 6stack ALC888-based systems. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-