- 06 6月, 2020 11 次提交
-
-
由 Logan Gunthorpe 提交于
When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed. When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed. Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible. Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side. Fixes: 1e530119 ("NTB: Add indexed ports NTB API") Signed-off-by: NLogan Gunthorpe <logang@deltatee.com> Acked-by: NAllen Hubbe <allenbh@gmail.com> Tested-by: NAlexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Logan Gunthorpe 提交于
Commit 417cf39c ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as: DMAR: Allocating domain for 0000:02:00.1 failed This is because the IOMMU has not setup the device for such use. Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: NLogan Gunthorpe <logang@deltatee.com> Tested-by: NAlexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Logan Gunthorpe 提交于
When running ntb_test this warning is issued: ./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input This is caused by the kernel returning one more byte than is necessary when reading the link file. Reduce the number of bytes read back to 2 as it was before the commit that regressed this. Fixes: 7f46c8b3 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: NLogan Gunthorpe <logang@deltatee.com> Acked-by: NAllen Hubbe <allenbh@gmail.com> Tested-by: NAlexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Sanjay R Mehta 提交于
The DMA map and unmap of destination address is already being done in perf_init_test() and perf_clear_test() functions. Hence avoiding it by making necessary changes in perf_copy_chunk() function. Signed-off-by: NSanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: NArindam Nath <arindam.nath@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Sanjay R Mehta 提交于
After trying to send commands for a maximum of MSG_TRIES re-tries, link-up fails due to short sleep time(1ms) between re-tries. Hence increasing the sleep time to one second providing sufficient time for perf link-up. Signed-off-by: NSanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: NArindam Nath <arindam.nath@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Sanjay R Mehta 提交于
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: NSanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: NArindam Nath <arindam.nath@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Sanjay R Mehta 提交于
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: NLogan Gunthorpe <logang@deltatee.com> Signed-off-by: NSanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: NArindam Nath <arindam.nath@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Logan Gunthorpe 提交于
This patch removes the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: NLogan Gunthorpe <logang@deltatee.com> Tested-by: NAlexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: NSanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Wesley Sheng 提交于
The comment for ntb_peer_spad_addr and ntb_peer_spad_read incorrectly referred to peer doorbell register and local scratchpad register. Signed-off-by: NWesley Sheng <wesley.sheng@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
intel_ntb4_link_disable() missing static declaration. Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Add NTB_HWERR_BAR_ALIGN hw errata flag to work around issue where the aligment for the XLAT base must be BAR size aligned rather than 4k page aligned. On ICX platform, the XLAT base can be 4k page size aligned rather than BAR size aligned unlike the previous gen Intel NTB. However, a silicon errata prevented this from working as expected and a workaround is introduced to resolve the issue. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
- 20 4月, 2020 1 次提交
-
-
由 Dave Jiang 提交于
Adding 4th generation Intel NTB support bits. There are a lot of common parts that the gen4 NTB has with gen3 NTB on Skylake. The commonalities are reused in gen4 Icelake NTB. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
- 13 4月, 2020 12 次提交
-
-
由 Jiasen Lin 提交于
As pthr->dma_chan can't be NULL in this context, so there is no need to check pthr->dma_chan. Fixes: 99a06056 ("NTB: ntb_perf: Fix address err in perf_copy_chunk") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJiasen Lin <linjiasen@hygon.cn> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Maciej Grochowski 提交于
Signed-off-by: NMaciej Grochowski <maciej.grochowski@pm.me> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
-
- 12 4月, 2020 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild由 Linus Torvalds 提交于
Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
-
由 Sedat Dilek 提交于
I do not longer work for credativ Germany. Please, use my private email address instead. This is for the case when people want to CC me on patches sent from my old business email address. Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 4月, 2020 12 次提交
-
-
由 Trond Myklebust 提交于
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking the RCU lock. Fixes: a9901899 ("pNFS: Add infrastructure for cleaning up per-layout commit structures") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Xiaoyao Li 提交于
Two types of #AC can be generated in Intel CPUs: 1. legacy alignment check #AC 2. split lock #AC Reflect #AC back into the guest if the guest has legacy alignment checks enabled or if split lock detection is disabled. If the #AC is not a legacy one and split lock detection is enabled, then invoke handle_guest_split_lock() which will either warn and disable split lock detection for this task or force SIGBUS on it. [ tglx: Switch it to handle_guest_split_lock() and rename the misnamed helper function. ] Suggested-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
-
由 Xiaoyao Li 提交于
Emulate split-lock accesses as writes if split lock detection is on to avoid #AC during emulation, which will result in a panic(). This should never occur for a well-behaved guest, but a malicious guest can manipulate the TLB to trigger emulation of a locked instruction[1]. More discussion can be found at [2][3]. [1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com [2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com [3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.comSuggested-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
-
由 Thomas Gleixner 提交于
Without at least minimal handling for split lock detection induced #AC, VMX will just run into the same problem as the VMWare hypervisor, which was reported by Kenneth. It will inject the #AC blindly into the guest whether the guest is prepared or not. Provide a function for guest mode which acts depending on the host SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a warning, disable SLD and mark the task accordingly. Otherwise force SIGBUS. [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
-
由 Masahiro Yamada 提交于
The keyword here is 'twice' to explain the trick. Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
-
由 Linus Torvalds 提交于
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull Documentation fixes from Jonathan Corbet: "A handful of late-arriving fixes for the documentation tree" * tag 'docs-5.7-2' of git://git.lwn.net/linux: Documentation: android: binderfs: add 'stats' mount option Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links docs: driver-api: address duplicate label warning Documentation: sysrq: fix RST formatting docs: kernel-parameters.txt: Fix broken references docs: kernel-parameters.txt: Remove nompx docs: filesystems: fix typo in qnx6.rst
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux由 Linus Torvalds 提交于
Pull orangefs updates from Mike Marshall: "A fix and two cleanups. Fix: - Christoph Hellwig noticed that some logic I added to orangefs_file_read_iter introduced a race condition, so he sent a reversion patch. I had to modify his patch since reverting at this point broke Orangefs. Cleanups: - Christoph Hellwig noticed that we were doing some unnecessary work in orangefs_flush, so he sent in a patch that removed the un-needed code. - Al Viro told me he had trouble building Orangefs. Orangefs should be easy to build, even for Al :-). I looked back at the test server build notes in orangefs.txt, just in case that's where the trouble really is, and found a couple of typos and made a couple of clarifications" * tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: clarify build steps for test server in orangefs.txt orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush orangefs: get rid of knob code...
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull xtensa updates from Max Filippov: - replace setup_irq() by request_irq() - cosmetic fixes in xtensa Kconfig and boot/Makefile * tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa: arch/xtensa: fix grammar in Kconfig help text xtensa: remove meaningless export ccflags-y xtensa: replace setup_irq() by request_irq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull more xen updates from Juergen Gross: - two cleanups - fix a boot regression introduced in this merge window - fix wrong use of memory allocation flags * tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: fix booting 32-bit pv guest x86/xen: make xen_pvmmu_arch_setup() static xen/blkfront: fix memory allocation flags in blkfront_setup_indirect() xen: Use evtchn_type_t as a type for event channels
-
由 Vasily Averin 提交于
If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NWaiman Long <longman@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vasily Averin 提交于
If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NPeter Oberparleiter <oberpar@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Waiman Long <longman@redhat.com> Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-