This simplifies the calling convention, and fixes a bug where we queue a
capsnap with a context other than i_head_snapc (the one that matches the
dirty pages).  The result was a BUG at fs/ceph/caps.c:2178 on writeback
completion when a capsnap matching the writeback snapc could not be found.
Signed-off-by: NSage Weil <sage@newdream.net>

When filldir returned an error (e.g. buffer full for a large directory),
we would leak a dentry reference, causing an oops on umount.
Signed-off-by: NSage Weil <sage@newdream.net>

Teach the client to decode an updated format for the osdmap.  The new
format includes pool names, which will be useful shortly.  Get this change
in earlier rather than later.
Signed-off-by: NSage Weil <sage@newdream.net>

If in_seq_acked isn't reset along with in_seq, we don't ack received
messages until we reach the old count, consuming gobs memory on the other
end of the connection and introducing a large delay when those messages
are eventually deleted.
Signed-off-by: NSage Weil <sage@newdream.net>

We create a ceph_cap_snap if there is dirty cap metadata (for writeback to
mds) OR dirty pages (for writeback to osd).  It is thus possible that the
metadata has been written back to the MDS but the OSD data has not when
the cap_snap is created.  This results in a cap_snap with dirty(caps) == 0.
The problem is that cap writeback to the MDS isn't necessary, and a
FLUSHSNAP cap op gets no ack from the MDS.  This leaves the cap_snap
attached to the inode along with its inode reference.

Fix the problem by dropping the cap_snap if it becomes 'complete' (all
pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs().

Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with
dirty(caps) == 0.
Signed-off-by: NSage Weil <sage@newdream.net>

The get_oldest_context() helper takes a reference to the returned snap
context, but most callers weren't dropping that reference.  Fix them.

Also drop the unused locked __get_oldest_context() variant.
Signed-off-by: NSage Weil <sage@newdream.net>

On snap deletion, we don't regenerate ceph_cap_snaps for inodes with dirty
pages because deletion does not affect metadata writeback.  However, we
did run into problems when we went to write back the pages because the
'oldest' snapc is determined by the oldest cap_snap, and that may be the
newer snapc that reflects the deletion.  This caused confusion and an
infinite loop in ceph_update_writeable_page().

Change the snapc checks to allow writeback of any snapc that is equal to
OR older than the 'oldest' snapc.

When there are no cap_snaps, we were also using the realm's latest snapc
for writeback, which complicates ceph_put_wrbufffer_cap_refs().  Instead,
use i_head_snapc, the most snapc used for the most recent ('head') data.
This makes the writeback snapc (ceph_osd_request.r_snapc) _always_ match a
capsnap or i_head_snapc.

Also, in writepags_finish(), drop the snapc referenced by the _page_
and do not assume it matches the request snapc (it may not anymore).
Signed-off-by: NSage Weil <sage@newdream.net>

If a lookup fails on the magic .snap directory, we bind it to a magic
snap directory inode in ceph_lookup_finish().  That code assumes the dentry
is unhashed, but a recent server-side change started returning NULL leases
on lookup failure, causing the .snap dentry to be hashed and NULL by
ceph_fill_trace().

This causes dentry hash chain corruption, or a dies when d_rehash()
includes
	BUG_ON(!d_unhashed(entry));

So, avoid processing the NULL dentry lease if it the dentry matches the
snapdir name in ceph_fill_trace().  That allows the lookup completion to
properly bind it to the snapdir inode.  BUG there if dentry is hashed to
be sure.
Signed-off-by: NSage Weil <sage@newdream.net>

Add a MAINTAINERS record for the key management facility.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  CRED: Fix memory leak in error handling

* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
  [LogFS] Erase new journal segments
  [LogFS] Move reserved segments with journal
  [LogFS] Clear PagePrivate when moving journal
  Simplify and fix pad_wbuf
  Prevent data corruption in logfs_rewrite_block()
  Use deactivate_locked_super
  Fix logfs_get_sb_final error path
  Write out both superblocks on mismatch
  Prevent schedule while atomic in __logfs_readdir
  Plug memory leak in writeseg_end_io
  Limit max_pages for insane devices
  Open segment file before using it

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Do not free zero sized per cpu areas
  x86: Make sure free_init_pages() frees pages on page boundary
  x86: Make smp_locks end with page alignment

Fix a memory leak on an OOM condition in prepare_usermodehelper_creds().
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Fix a race in o2dlm lockres mastery
  Ocfs2: Handle deletion of reflinked oprhan inodes correctly.
  Ocfs2: Journaling i_flags and i_orphaned_slot when adding inode to orphan dir.
  ocfs2: Clear undo bits when local alloc is freed
  ocfs2: Init meta_ac properly in ocfs2_create_empty_xattr_block.
  ocfs2: Fix the update of name_offset when removing xattrs
  ocfs2: Always try for maximum bits with new local alloc windows
  ocfs2: set i_mode on disk during acl operations
  ocfs2: Update i_blocks in reflink operations.
  ocfs2: Change bg_chain check for ocfs2_validate_gd_parent.
  [PATCH] Skip check for mandatory locks when unlocking

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (28 commits)
  ceph: update discussion list address in MAINTAINERS
  ceph: some documentations fixes
  ceph: fix use after free on mds __unregister_request
  ceph: avoid loaded term 'OSD' in documention
  ceph: fix possible double-free of mds request reference
  ceph: fix session check on mds reply
  ceph: handle kmalloc() failure
  ceph: propagate mds session allocation failures to caller
  ceph: make write_begin wait propagate ERESTARTSYS
  ceph: fix snap rebuild condition
  ceph: avoid reopening osd connections when address hasn't changed
  ceph: rename r_sent_stamp r_stamp
  ceph: fix connection fault con_work reentrancy problem
  ceph: prevent dup stale messages to console for restarting mds
  ceph: fix pg pool decoding from incremental osdmap update
  ceph: fix mds sync() race with completing requests
  ceph: only release unused caps with mds requests
  ceph: clean up handle_cap_grant, handle_caps wrt session mutex
  ceph: fix session locking in handle_caps, ceph_check_caps
  ceph: drop unnecessary WARN_ON in caps migration
  ...

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (asc7621) Add X58 entry in Kconfig
  hwmon: (w83793) Saving negative errors in unsigned
  hwmon: (coretemp) Add missing newline to dev_warn() message
  hwmon: (coretemp) Fix cpu model output

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_via: fix VT6410/6415/6330 detection issue

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  r8169: offical fix for CVE-2009-4537 (overlength frame DMAs)
  ipv6: Don't drop cache route entry unless timer actually expired.
  tulip: Add missing parens.
  r8169: fix broken register writes
  pcnet_cs: add new id
  bonding: fix broken multicast with round-robin mode
  drivers/net: Fix continuation lines
  e1000: do not modify tx_queue_len on link speed change
  net: ipmr/ip6mr: prevent out-of-bounds vif_table access
  ixgbe: Do not run all Diagnostic offline tests when VFs are active
  igb: use correct bits to identify if managability is enabled
  benet: Fix compile warnnings in drivers/net/benet/be_ethtool.c
  net: Add MSG_WAITFORONE flag to recvmmsg
  e1000e: do not modify tx_queue_len on link speed change
  igbvf: do not modify tx_queue_len on link speed change
  ipv4: Restart rt_intern_hash after emergency rebuild (v2)
  ipv4: Cleanup struct net dereference in rt_intern_hash
  net: fix netlink address dumping in IPv4/IPv6
  tulip: Fix null dereference in uli526x_rx_packet()
  gianfar: fix undo of reserve()
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Properly truncate pt_regs framepointer in perf callback.
  arch/sparc/kernel: Use set_cpus_allowed_ptr
  sparc: Fix use of uid16_t and gid16_t in asm/stat.h

In commit 9df93939 ("ext3: Use bitops to read/modify
EXT3_I(inode)->i_state") ext3 changed its internal 'i_state' variable to
use bitops for its state handling.  However, unline the same ext4
change, it didn't actually change the name of the field when it changed
the semantics of it.

As a result, an old use of 'i_state' remained in fs/ext3/ialloc.c that
initialized the field to EXT3_STATE_NEW.  And that does not work
_at_all_ when we're now working with individually named bits rather than
values that get masked.  So the code tried to mark the state to be new,
but in actual fact set the field to EXT3_STATE_JDATA.  Which makes no
sense at all, and screws up all the code that checks whether the inode
was newly allocated.

In particular, it made the xattr code unhappy, and caused various random
behavior, like apparently

	https://bugzilla.redhat.com/show_bug.cgi?id=577911

So fix the initialization, and rename the field to match ext4 so that we
don't have this happen again.

Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Daniel J Walsh <dwalsh@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Official patch to fix the r8169 frame length check error.

Based on this initial thread:
http://marc.info/?l=linux-netdev&m=126202972828626&w=1
This is the official patch to fix the frame length problems in the r8169
driver.  As noted in the previous thread, while this patch incurs a performance
hit on the driver, its possible to improve performance dynamically by updating
the mtu and rx_copybreak values at runtime to return performance to what it was
for those NICS which are unaffected by the ideosyncracy (if there are any).

Summary:

    A while back Eric submitted a patch for r8169 in which the proper
allocated frame size was written to RXMaxSize to prevent the NIC from dmaing too
much data.  This was done in commit fdd7b4c3.  A
long time prior to that however, Francois posted
126fa4b9, which expiclitly disabled the MaxSize
setting due to the fact that the hardware behaved in odd ways when overlong
frames were received on NIC's supported by this driver.  This was mentioned in a
security conference recently:
http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html

It seems that if we can't enable frame size filtering, then, as Eric correctly
noticed, we can find ourselves DMA-ing too much data to a buffer, causing
corruption.  As a result is seems that we are forced to allocate a frame which
is ready to handle a maximally sized receive.

This obviously has performance issues with it, so to mitigate that issue, this
patch does two things:

1) Raises the copybreak value to the frame allocation size, which should force
appropriately sized packets to get allocated on rx, rather than a full new 16k
buffer.

2) This patch only disables frame filtering initially (i.e., during the NIC
open), changing the MTU results in ring buffer allocation of a size in relation
to the new mtu (along with a warning indicating that this is dangerous).

Because of item (2), individuals who can't cope with the performance hit (or can
otherwise filter frames to prevent the bug), or who have hardware they are sure
is unaffected by this issue, can manually lower the copybreak and reset the mtu
such that performance is restored easily.
Signed-off-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For 32-bit processes, we save the full 64-bits of the regs in pt_regs.

But unlike when the userspace actually does load and store
instructions, the top 32-bits don't get automatically truncated by the
cpu in kernel mode (because the kernel doesn't execute with PSTATE_AM
address masking enabled).

So we have to do it by hand.
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621.
Also arranged existing models in ascending order.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

"ret" is used to store the return value for watchdog_trigger() and it
should be signed for the error handling to work.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add missing newline to dev_warn() message string. This is more of an issue
with older kernels that don't automatically add a newline if it was missing
from the end of the previous line.
Signed-off-by: NDean Nelson <dnelson@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Avoid hex and decimal confusion when printing out the cpu model.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

If the device contains on old logfs image and the journal is moved to
segment that have never been used by the current logfs and not all
journal segments are erased before the next mount, the old content can
confuse mount code.  To prevent this, always erase the new journal
segments.
Signed-off-by: NJoern Engel <joern@logfs.org>

Fixes a GC livelock.
Signed-off-by: NJoern Engel <joern@logfs.org>

This avoids an infinite loop in free_early_partial().

Add a warning to free_early_partial() to catch future problems.

-v5: put back start > end back into WARN_ONCE()
-v6: use one line for warning, suggested by Linus
-v7: more tests
-v8: remove the function name as suggested by Johannes
     WARN_ONCE() will print out that function name.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NJoel Becker <joel.becker@oracle.com>
Tested-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-4-git-send-email-yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or
in a more compact fashion.

Example:

 Allocated new RAMDISK: 00ec2000 - 0248ce57
 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56

The new RAMDISK's end is not page aligned.
Last page could be shared with other users.

When free_init_pages are called for initrd or .init, the page
could be freed and we could corrupt other data.

code segment in free_init_pages():

 |        for (; addr < end; addr += PAGE_SIZE) {
 |                ClearPageReserved(virt_to_page(addr));
 |                init_page_count(virt_to_page(addr));
 |                memset((void *)(addr & ~(PAGE_SIZE-1)),
 |                        POISON_FREE_INITMEM, PAGE_SIZE);
 |                free_page(addr);
 |                totalram_pages++;
 |        }

last half page could be used as one whole free page.

So page align the boundaries.

-v2: make the original initramdisk to be aligned, according to
     Johannes, otherwise we have the chance to lose one page.
     we still need to keep initrd_end not aligned, otherwise it could
     confuse decompressor.
-v3: change to WARN_ON instead, suggested by Johannes.
-v4: use PAGE_ALIGN, suggested by Johannes.
     We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN
     Add comments about assuming ramdisk start is aligned
     in relocate_initrd(), change to re get ramdisk_image instead of save it
     to make diff smaller. Add warning for wrong range, suggested by Johannes.
-v6: remove one WARN()
     We need to align beginning in free_init_pages()
     do not copy more than ramdisk_size, noticed by Johannes
Reported-by: NStanislaw Gruszka <sgruszka@redhat.com>
Tested-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSage Weil <sage@newdream.net>

New documentation should have an entry in the 00-INDEX.  Correct git
urls.
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Fix:

 ------------[ cut here ]------------
 WARNING: at arch/x86/mm/init.c:342 free_init_pages+0x4c/0xfa()
 free_init_pages: range [0x40daf000, 0x40db5c24] is not aligned
 Modules linked in:
 Pid: 0, comm: swapper Not tainted
 2.6.34-rc2-tip-03946-g4f16b23-dirty #50 Call Trace:
  [<40232e9f>] warn_slowpath_common+0x65/0x7c
  [<4021c9f0>] ? free_init_pages+0x4c/0xfa
  [<40881434>] ? _etext+0x0/0x24
  [<40232eea>] warn_slowpath_fmt+0x24/0x27
  [<4021c9f0>] free_init_pages+0x4c/0xfa
  [<40881434>] ? _etext+0x0/0x24
  [<40d3f4bd>] alternative_instructions+0xf6/0x100
  [<40d3fe4f>] check_bugs+0xbd/0xbf
  [<40d398a7>] start_kernel+0x2d5/0x2e4
  [<40d390ce>] i386_start_kernel+0xce/0xd5
 ---[ end trace 4eaa2a86a8e2da22 ]---

Comments in vmlinux.lds.S already said:

 |        /*
 |         * smp_locks might be freed after init
 |         * start/end must be page aligned
 |         */
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-2-git-send-email-yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: skip probe if there are no devices on the port (v2)"
  Revert "via82cxxx: workaround h/w bugs"

Commit b26b2d49 ("resource/PCI: align functions now return start
of resource") added lines with missing semicolons.

Add the missing semicolons to the FRV and CRIS arch code.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: linux@dominikbrodowski.net
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_SLOW_WORK_PROC was changed to CONFIG_SLOW_WORK_DEBUG, but not in all
instances.  Change the remaining instances.  This makes the debugfs file
display the time mark and the owner's description again.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise we can get an oops if the user has no get_ref/put_ref
requirement.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: Use LPIB for ga-ma770-ud3 board
  ALSA: ac97: Add Toshiba P500 to ac97 jack sense blacklist
  ALSA: pcm_lib - fix xrun functionality
  ALSA: ac97: Add IBM ThinkPad R40e to Headphone/Line Jack Sense blacklist
  ALSA: hda - Don't set invalid connection index in Realtek initialiaiton

FC disable is bit 3 of the txmac ctl register, but commit 6720949d
("Staging: et131x: Kil the txmac type") accidentally changed the code to
set bit 2 instead.
Signed-off-by: NNick Bowler <nbowler@draconx.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>