When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Underlying xfrm output supports gso packets.
Declare support in hw_features and adapt the xmit MTU check to pass GSO
packets.
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.

Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.

Fixes: 9cf545eb ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: NVisa Hankala <visa@hankala.org>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

The disable_xfrm flag signals that xfrm should not be performed during
routing towards a device before reaching device xmit.

For xfrm interfaces this is usually desired as they perform the outbound
policy lookup as part of their xmit using their if_id.

Before this change enabling this flag on xfrm interfaces prevented them
from xmitting as xfrm_lookup_with_ifid() would not perform a policy lookup
in case the original dst had the DST_NOXFRM flag.

This optimization is incorrect when the lookup is done by the xfrm
interface xmit logic.

Fix by performing policy lookup when invoked by xfrmi as if_id != 0.

Similarly it's unlikely for the 'no policy exists on net' check to yield
any performance benefits when invoked from xfrmi.

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

When setting xfrm replay_window to values higher than 32, a rare
page-fault occurs in xfrm_replay_advance_bmp:

  BUG: unable to handle page fault for address: ffff8af350ad7920
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD ad001067 P4D ad001067 PUD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 3 PID: 30 Comm: ksoftirqd/3 Kdump: loaded Not tainted 5.4.52-050452-generic #202007160732
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  RIP: 0010:xfrm_replay_advance_bmp+0xbb/0x130
  RSP: 0018:ffffa1304013ba40 EFLAGS: 00010206
  RAX: 000000000000010d RBX: 0000000000000002 RCX: 00000000ffffff4b
  RDX: 0000000000000018 RSI: 00000000004c234c RDI: 00000000ffb3dbff
  RBP: ffffa1304013ba50 R08: ffff8af330ad7920 R09: 0000000007fffffa
  R10: 0000000000000800 R11: 0000000000000010 R12: ffff8af29d6258c0
  R13: ffff8af28b95c700 R14: 0000000000000000 R15: ffff8af29d6258fc
  FS:  0000000000000000(0000) GS:ffff8af339ac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8af350ad7920 CR3: 0000000015ee4000 CR4: 00000000001406e0
  Call Trace:
   xfrm_input+0x4e5/0xa10
   xfrm4_rcv_encap+0xb5/0xe0
   xfrm4_udp_encap_rcv+0x140/0x1c0

Analysis revealed offending code is when accessing:

	replay_esn->bmp[nr] |= (1U << bitnr);

with 'nr' being 0x07fffffa.

This happened in an SMP system when reordering of packets was present;
A packet arrived with a "too old" sequence number (outside the window,
i.e 'diff > replay_window'), and therefore the following calculation:

			bitnr = replay_esn->replay_window - (diff - pos);

yields a negative result, but since bitnr is u32 we get a large unsigned
quantity (in crash dump above: 0xffffff4b seen in ecx).

This was supposed to be protected by xfrm_input()'s former call to:

		if (x->repl->check(x, skb, seq)) {

However, the state's spinlock x->lock is *released* after '->check()'
is performed, and gets re-acquired before '->advance()' - which gives a
chance for a different core to update the xfrm state, e.g. by advancing
'replay_esn->seq' when it encounters more packets - leading to a
'diff > replay_window' situation when original core continues to
xfrm_replay_advance_bmp().

An attempt to fix this issue was suggested in commit bcf66bf5
("xfrm: Perform a replay check after return from async codepaths"),
by calling 'x->repl->recheck()' after lock is re-acquired, but fix
applied only to asyncronous crypto algorithms.

Augment the fix, by *always* calling 'recheck()' - irrespective if we're
using async crypto.

Fixes: 0ebea8ef ("[IPSEC]: Move state lock into x->type->input")
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

redact XFRM SA secret in the netlink response to xfrm_get_sa()
or dumpall sa.
Enable lockdown, confidentiality mode, at boot or at run time.

e.g. when enabled:
cat /sys/kernel/security/lockdown
none integrity [confidentiality]

ip xfrm state
src 172.16.1.200 dst 172.16.1.100
	proto esp spi 0x00000002 reqid 2 mode tunnel
	replay-window 0
	aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96

note: the aead secret is redacted.
Redacting secret is also a FIPS 140-2 requirement.

v1->v2
 - add size checks before memset calls
v2->v3
 - replace spaces with tabs for consistency
v3->v4
 - use kernel lockdown instead of a /proc setting
v4->v5
 - remove kconfig option
Reviewed-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely.  As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NJames Morris <jamorris@linux.microsoft.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Commit d3fd6548 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.

Use this function instead of own code.

While on it, remove xfrmi_get_stats64() and replace it with
dev_get_tstats64().
Signed-off-by: NLev Stipakov <lev@openvpn.net>
Reviewed-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215939.147007-1-lev@openvpn.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>

if xfrm_get_translator() failed, xfrm_user_policy() return without
freeing 'data', which is allocated in memdup_sockptr().

Fixes: 96392ee5 ("xfrm/compat: Translate 32-bit user_policy from sockptr")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYu Kuai <yukuai3@huawei.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

32-bit to 64-bit messages translator zerofies needed paddings in the
translation, the rest is the actual payload.
Don't allocate zero pages as they are not needed.

Fixes: 5106f4a8 ("xfrm/compat: Add 32=>64-bit messages translator")
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

32-bit messages translated by xfrm_compat can have attributes attached.
For all, but XFRMA_SA, XFRMA_POLICY the size of payload is the same
in 32-bit UABI and 64-bit UABI. For XFRMA_SA (struct xfrm_usersa_info)
and XFRMA_POLICY (struct xfrm_userpolicy_info) it's only tail-padding
that is present in 64-bit payload, but not in 32-bit.
The proper size for destination nlattr is already calculated by
xfrm_user_rcv_calculate_len64() and allocated with kvmalloc().

xfrm_attr_cpy32() copies 32-bit copy_len into 64-bit attribute
translated payload, zero-filling possible padding for SA/POLICY.
Due to a typo, *pos already has 64-bit payload size, in a result next
memset(0) is called on the memory after the translated attribute, not on
the tail-padding of it.

Fixes: 5106f4a8 ("xfrm/compat: Add 32=>64-bit messages translator")
Reported-by: syzbot+c43831072e7df506a646@syzkaller.appspotmail.com
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

xfrm_xlate32() translates 64-bit message provided by kernel to be sent
for 32-bit listener (acknowledge or monitor). Translator code doesn't
expect XFRMA_UNSPEC attribute as it doesn't know its payload.
Kernel never attaches such attribute, but a user can.

I've searched if any opensource does it and the answer is no.
Nothing on github and google finds only tfcproject that has such code
commented-out.

What will happen if a user sends a netlink message with XFRMA_UNSPEC
attribute? Ipsec code ignores this attribute. But if there is a
monitor-process or 32-bit user requested ack - kernel will try to
translate such message and will hit WARN_ONCE() in xfrm_xlate64_attr().

Deal with XFRMA_UNSPEC by copying the attribute payload with
xfrm_nla_cpy(). In result, the default switch-case in xfrm_xlate64_attr()
becomes an unused code. Leave those 3 lines in case a new xfrm attribute
will be added.

Fixes: 5461fc0c ("xfrm/compat: Add 64=>32-bit messages translator")
Reported-by: syzbot+a7e701c8385bd8543074@syzkaller.appspotmail.com
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NAllen Pais <apais@linux.microsoft.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

we found that the following race condition exists in
xfrm_alloc_userspi flow:

user thread                                    state_hash_work thread
----                                           ----
xfrm_alloc_userspi()
 __find_acq_core()
   /*alloc new xfrm_state:x*/
   xfrm_state_alloc()
   /*schedule state_hash_work thread*/
   xfrm_hash_grow_check()   	               xfrm_hash_resize()
 xfrm_alloc_spi                                  /*hold lock*/
      x->id.spi = htonl(spi)                     spin_lock_bh(&net->xfrm.xfrm_state_lock)
      /*waiting lock release*/                     xfrm_hash_transfer()
      spin_lock_bh(&net->xfrm.xfrm_state_lock)      /*add x into hlist:net->xfrm.state_byspi*/
	                                                hlist_add_head_rcu(&x->byspi)
                                                 spin_unlock_bh(&net->xfrm.xfrm_state_lock)

    /*add x into hlist:net->xfrm.state_byspi 2 times*/
    hlist_add_head_rcu(&x->byspi)

1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist
in  __find_acq_core() on the LHS;
2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state
(include x) into the new bydst hlist and new byspi hlist;
3. user thread on the LHS gets the lock and adds x into the new byspi hlist again.

So the same xfrm_state (x) is added into the same list_hash
(net->xfrm.state_byspi) 2 times that makes the list_hash become
an inifite loop.

To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved
to the back of spin_lock_bh, sothat state_hash_work thread no longer add x
which id.spi is zero into the hash_list.

Fixes: f034b5d4 ("[XFRM]: Dynamic xfrm_state hash table sizing.")
Signed-off-by: Nzhuoliang zhang <zhuoliang.zhang@mediatek.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Simplify the code by using new function dev_fetch_sw_netstats().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a6b816f4-bbf2-9db0-d59a-7e4e9cc808fe@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

As Nicolas noticed in his case, when xfrm_interface module is installed
the standard IP tunnels will break in receiving packets.

This is caused by the IP tunnel handlers with a higher priority in xfrm
interface processing incoming packets by xfrm_input(), which would drop
the packets and return 0 instead when anything wrong happens.

Rather than changing xfrm_input(), this patch is to adjust the priority
for the IP tunnel handlers in xfrm interface, so that the packets would
go to xfrmi's later than the others', as the others' would not drop the
packets when the handlers couldn't process them.

Note that IPCOMP also defines its own IPIP tunnel handler and it calls
xfrm_input() as well, so we must make its priority lower than xfrmi's,
which means having xfrmi loaded would still break IPCOMP. We may seek
another way to fix it in xfrm_input() in the future.
Reported-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: da9bbf05 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
FIxes: d7b360c2 ("xfrm: interface: support IP6IP6 and IP6IP tunnels processing with .cb_handler")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

use new helper for netstats settings
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The struct flowi must never be interpreted by itself as its size
depends on the address family.  Therefore it must always be grouped
with its original family value.

In this particular instance, the original family value is lost in
the function xfrm_state_find.  Therefore we get a bogus read when
it's coupled with the wrong family which would occur with inter-
family xfrm states.

This patch fixes it by keeping the original family value.

Note that the same bug could potentially occur in LSM through
the xfrm_state_pol_flow_match hook.  I checked the current code
there and it seems to be safe for now as only secid is used which
is part of struct flowi_common.  But that API should be changed
so that so that we don't get new bugs in the future.  We could
do that by replacing fl with just secid or adding a family field.

Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com
Fixes: 48b8d783 ("[XFRM]: State selection update to use inner...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Provide compat_xfrm_userpolicy_info translation for xfrm setsocketopt().
Reallocate buffer and put the missing padding for 64-bit message.
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Provide the user-to-kernel translator under XFRM_USER_COMPAT, that
creates for 32-bit xfrm-user message a 64-bit translation.
The translation is afterwards reused by xfrm_user code just as if
userspace had sent 64-bit message.
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Currently nlmsg_unicast() is used by functions that dump structures that
can be different in size for compat tasks, see dump_one_state() and
dump_one_policy().

The following nlmsg_unicast() users exist today in xfrm:

         Function                          |    Message can be different
                                           |       in size on compat
-------------------------------------------|------------------------------
    xfrm_get_spdinfo()                     |               N
    xfrm_get_sadinfo()                     |               N
    xfrm_get_sa()                          |               Y
    xfrm_alloc_userspi()                   |               Y
    xfrm_get_policy()                      |               Y
    xfrm_get_ae()                          |               N

Besides, dump_one_state() and dump_one_policy() can be used by filtered
netlink dump for XFRM_MSG_GETSA, XFRM_MSG_GETPOLICY.

Just as for xfrm multicast, allocate frag_list for compat skb journey
down to recvmsg() which will give user the desired skb according to
syscall bitness.
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Provide the kernel-to-user translator under XFRM_USER_COMPAT, that
creates for 64-bit xfrm-user message a 32-bit translation and puts it
in skb's frag_list. net/compat.c layer provides MSG_CMSG_COMPAT to
decide if the message should be taken from skb or frag_list.
(used by wext-core which has also an ABI difference)

Kernel sends 64-bit xfrm messages to the userspace for:
- multicast (monitor events)
- netlink dumps

Wire up the translator to xfrm_nlmsg_multicast().
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Add a skeleton for xfrm_compat module and provide API to register it in
xfrm_state.ko. struct xfrm_translator will have function pointers to
translate messages received from 32-bit userspace or to be sent to it
from 64-bit kernel.
module_get()/module_put() are used instead of rcu_read_lock() as the
module will vmalloc() memory for translation.
The new API is registered with xfrm_state module, not with xfrm_user as
the former needs translator for user_policy set by setsockopt() and
xfrm_user already uses functions from xfrm_state.
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

When we clone state only add_time was cloned. It missed values like
bytes, packets.  Now clone the all members of the structure.

v1->v3:
 - use memcpy to copy the entire structure

Fixes: 80c9abaa ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

XFRMA_SEC_CTX was not cloned from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE

v1->v2:
 - return -ENOMEM on error
v2->v3:
 - fix return type to int

Fixes: 80c9abaa ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

XFRMA_SET_MARK and XFRMA_SET_MARK_MASK was not cloned from the old
to the new. Migrate these two attributes during XFRMA_MSG_MIGRATE

Fixes: 9b42c1f1 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

xfrm interfaces currently test for !skb->ignore_df when deciding
whether to update the pmtu on the skb's dst. Because of this, no pmtu
exception is created when we do something like:

    ping -s 1438 <dest>

By dropping this check, the pmtu exception will be created and the
next ping attempt will work.

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Reported-by: NXiumei Mu <xmu@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>

Xiumei reported a bug with espintcp over IPv6 in transport mode,
because xfrm6_transport_finish expects to find IP6CB data (struct
inet6_skb_cb). Currently, espintcp zeroes the CB, but the relevant
part is actually preserved by previous layers (first set up by tcp,
then strparser only zeroes a small part of tcp_skb_tb), so we can just
relocate it to the start of skb->cb.

Fixes: e27cca96 ("xfrm: add espintcp (RFC 8229)")
Reported-by: NXiumei Mu <xmu@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Currently, espintcp_rcv drops packets silently, which makes debugging
issues difficult. Count packets as either XfrmInHdrError (when the
packet was too short or contained invalid data) or XfrmInError (for
other issues).
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Currently, short messages (less than 4 bytes after the length header)
will break the stream of messages. This is unnecessary, since we can
still parse messages even if they're too short to contain any usable
data. This is also bogus, as keepalive messages (a single 0xff byte),
though not needed with TCP encapsulation, should be allowed.

This patch changes the stream parser so that short messages are
accepted and dropped in the kernel. Messages that contain a valid SPI
or non-ESP header are processed as before.

Fixes: e27cca96 ("xfrm: add espintcp (RFC 8229)")
Reported-by: NAndrew Cagney <cagney@libreswan.org>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.

A plain seqcount_t does not contain the information of which lock must
be held when entering a write side critical section.

Use the new seqcount_spinlock_t and seqcount_mutex_t data types instead,
which allow to associate a lock with the sequence counter. This enables
lockdep to verify that the lock used for writer serialization is held
when the write side critical section is entered.

If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: NAhmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-17-a.darwish@linutronix.de

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We forgot to support the xfrm policy hold queue when
VTI was implemented. This patch adds everything we
need so that we can use the policy hold queue together
with VTI interfaces.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

kernel test robot reported some compile errors:

  ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_fini':
  net/xfrm/xfrm_interface.c:900: undefined reference to `xfrm4_tunnel_deregister'
  ia64-linux-ld: net/xfrm/xfrm_interface.c:901: undefined reference to `xfrm4_tunnel_deregister'
  ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_init':
  net/xfrm/xfrm_interface.c:873: undefined reference to `xfrm4_tunnel_register'
  ia64-linux-ld: net/xfrm/xfrm_interface.c:876: undefined reference to `xfrm4_tunnel_register'
  ia64-linux-ld: net/xfrm/xfrm_interface.c:885: undefined reference to `xfrm4_tunnel_deregister'

This happened when set CONFIG_XFRM_INTERFACE=y and CONFIG_INET_TUNNEL=m.
We don't really want xfrm_interface to depend inet_tunnel completely,
but only to disable the tunnel code when inet_tunnel is not seen.

So instead of adding "select INET_TUNNEL" for XFRM_INTERFACE, this patch
is only to change to IS_REACHABLE to avoid these compile error.
Reported-by: Nkernel test robot <lkp@intel.com>
Fixes: da9bbf05 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

In case we're compiling espintcp support only for IPv6, we should
still initialize the common code.

Fixes: 26333c37 ("xfrm: add IPv6 support for espintcp")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

man 2 recv says:

    RETURN VALUE

    When a stream socket peer has performed an orderly shutdown, the
    return value will be 0 (the traditional "end-of-file" return).

Currently, this works for blocking reads, but non-blocking reads will
return -EAGAIN. This patch overwrites that return value when the peer
won't send us any more data.

Fixes: e27cca96 ("xfrm: add espintcp (RFC 8229)")
Reported-by: NAndrew Cagney <cagney@libreswan.org>
Tested-by: NAndrew Cagney <cagney@libreswan.org>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Currently, non-blocking sends from userspace result in EOPNOTSUPP.

To support this, we need to tell espintcp_sendskb_locked() and
espintcp_sendskmsg_locked() that non-blocking operation was requested
from espintcp_sendmsg().

Fixes: e27cca96 ("xfrm: add espintcp (RFC 8229)")
Reported-by: NAndrew Cagney <cagney@libreswan.org>
Tested-by: NAndrew Cagney <cagney@libreswan.org>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

As we did in the last 2 patches for vti(6), this patch is to define a
new xfrm_tunnel object 'xfrmi_ipip6_handler' to register for AF_INET6,
and a new xfrm6_tunnel object 'xfrmi_ip6ip_handler' to register for
AF_INET.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

xfrmi_lookup() is called on every packet. Using a single list for
looking up if_id becomes a bottleneck when having many xfrm interfaces.
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>