Check the return value of device_register() in platform_bus_init().
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make make_class_name() return NULL on error and fixup callers in the
driver core.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

  /sys/module/usbcore/
  |-- drivers
  |   |-- usb:hub -> ../../../subsystem/usb/drivers/hub
  |   |-- usb:usb -> ../../../subsystem/usb/drivers/usb
  |   `-- usb:usbfs -> ../../../subsystem/usb/drivers/usbfs
  |-- holders
  |   |-- ehci_hcd -> ../../../module/ehci_hcd
  |   |-- uhci_hcd -> ../../../module/uhci_hcd
  |   |-- usb_storage -> ../../../module/usb_storage
  |   `-- usbhid -> ../../../module/usbhid
  |-- initstate
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the module name to all USB drivers, if they are built into the
kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the module name to all SERIO drivers, if they are built into
the kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the module name to all PCI drivers, if they are built into the
kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

It also fixes up the IDE core, which was calling __pci_register_driver()
directly.

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes the module core to only create the drivers/ directory if we
are going to put something in it.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we allow NULL as the new parent in device_move(), we need to make sure
that the device is placed into the same place as it would if it was
newly registered:

- Consider the device virtual tree. In order to be able to reuse code,
  setup_parent() has been tweaked a bit.
- kobject_move() can fall back to the kset's kobject.
- sysfs_move_dir() uses the sysfs root dir as fallback.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

device_is_registered() will always be false for a device with no bus. Remove
this check and trust the caller to know what they're doing.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This lets the network core have the ability to handle suspend/resume
issues, if it wants to.

Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm
driver fixes.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <linux-pcmcia@lists.infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It should be ok to pass in NULL for some kobject functions, so add error
checking for all exported kobject functions to be more robust.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Remove incorrect kgdb define
  JFS: call io_schedule() instead of schedule() to avoid deadlock
  JFS: Add lockdep annotations
  JFS: Avoid BUG() on a damaged file system

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
  [GFS2] make gfs2_writepages() static
  [GFS2] Unlock page on prepare_write try lock failure
  [GFS2] nfsd readdirplus assertion failure
  [DLM] fix softlockup in dlm_recv
  [DLM] zero new user lvbs
  [DLM/GFS2] indent help text
  [GFS2] Fix unlink deadlocks
  [GFS2] Put back semaphore to avoid umount problem
  [GFS2] more CURRENT_TIME_SEC
  [GFS2/DLM] fix GFS2 circular dependency
  [GFS2/DLM] use sysfs
  [GFS2] make lock_dlm drop_count tunable in sysfs
  [GFS2] increase default lock limit
  [GFS2] Fix list corruption in lops.c
  [GFS2] Fix recursive locking attempt with NFS
  [DLM] can miss clearing resend flag
  [DLM] saved dlm message can be dropped
  [DLM] Make sock_sem into a mutex
  [GFS2] Fix typo in glock.c
  [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2
  ...

On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc6-mm2:
>...
>  git-gfs2-nmw.patch
>...
>  git trees
>...

This patch makes the needlessly global gfs2_writepages() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When the try lock of the glock failed in prepare_write we were
incorrectly exiting this function with the page still locked.
This was resulting in further I/O to this page hanging.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] swiotlb abstraction (e.g. for Xen)
  [IA64] swiotlb cleanup
  [IA64] make swiotlb use bus_to_virt/virt_to_bus
  [IA64] swiotlb bug fixes
  [IA64] Hook up getcpu system call for IA64
  [IA64] clean up sparsemem memory_present call
  [IA64] show_mem() for IA64 sparsemem NUMA
  [IA64] missing exports hwsw_sync_...
  [IA64] virt_to_page() can be called with NULL arg
  [IA64] alignment bug in ldscript
  [IA64] register memory ranges in a consistent manner
  [IA64] Enable SWIOTLB only when needed
  [IA64-SGI] Check for TIO errors on shub2 Altix
  [IA64] remove bogus prototype ia64_esi_init()
  [IA64] Clear IRQ affinity when unregistered
  [IA64] fix ACPI Kconfig issues
  [IA64] Fix NULL-pointer dereference in ia64_machine_kexec()
  [IA64] find thread for user rbs address
  [IA64] use snprintf() on features field of /proc/cpuinfo
  [IA64] enable singlestep on system call
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ocfs2_link() journal credits update

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: handle multi-interface devices for Apple macbook pro properly
  HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
  USB HID: fix bogus comment in hid_get_class_descriptor()
  USB HID: remove hid_find_field_by_usage()
  HID: API - fix leftovers of hidinput API in USB HID
  HID: hid debug from hid-debug.h to hid layer
  hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
  hid: quirk for multi-input devices with unneeded output reports
  hid: allow force feedback for multi-input devices

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Remove obsolete prototypes
  IB/ehca: Remove use of do_mmap()
  RDMA/addr: Handle ethernet neighbour updates during route resolution
  IB: Make sure struct ib_user_mad.data is aligned
  IB/srp: Don't wait for response when QP is in error state.
  IB: Return qp pointer as part of ib_wc
  IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
  mmc: tifm: replace kmap with page_address
  mmc: sdhci: fix voltage ocr
  mmc: sdhci: replace kmap with page_address
  mmc: wbsd: replace kmap with page_address
  mmc: handle pci_enable_device() return value in sdhci
  mmc: Proper unclaim in mmc_block
  mmc: change wbsd mailing list
  mmc: Graceful fallback for fancy features
  mmc: Handle wbsd's stupid command list
  mmc: Allow host drivers to specify max block count
  mmc: Allow host drivers to specify a max block size
  tifm_sd: add suspend and resume functionality
  tifm_core: add suspend/resume infrastructure for tifm devices
  tifm_7xx1: prettify
  tifm_7xx1: recognize device 0xac8f as supported
  tifm_7xx1: switch from workqueue to kthread
  tifm_7xx1: Merge media insert and media remove functions
  tifm_7xx1: simplify eject function
  Add dummy_signal_irq function to save check in ISR
  Remove unused return value from signal_irq callback
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits)
  [S390] Avoid excessive inlining.
  [S390] Mark kernel text section read-only.
  [S390] Convert memory detection into C code.
  [S390] Calibrate delay and bogomips.
  [S390] Hypervisor filesystem (s390_hypfs) for z/VM
  [S390] Add crypto support for 3592 tape devices
  [S390] boot from NSS support
  [S390] Support for s390 Pseudo Random Number Generator
  [S390] ETR support.
  [S390] noexec protection
  [S390] move crypto options and some cleanup.
  [S390] cio: Don't spam debug feature.
  [S390] Cleanup of CHSC event handling.
  [S390] cio: declare hardware structures packed.
  [S390] Add set_fs(USER_DS) to start_thread().
  [S390] cio: Catch operand exceptions on stsch.
  [S390] Fix register usage description.
  [S390] kretprobe_trampoline_holder() in wrong section.
  [S390] Fix kprobes breakpoint handling.
  [S390] Update maintainers file.
  ...

Fix the key serial number collision avoidance code in key_alloc_serial().

This didn't use to be so much of a problem as the key serial numbers were
allocated from a simple incremental counter, and it would have to go through
two billion keys before it could possibly encounter a collision.  However, now
that random numbers are used instead, collisions are much more likely.

This is fixed by finding a hole in the rbtree where the next unused serial
number ought to be and using that by going almost back to the top of the
insertion routine and redoing the insertion with the new serial number rather
than trying to be clever and attempting to work out the insertion point
pointer directly.

This fixes kernel BZ #7727.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Minor cleanup
  [CIFS] Missing free in error path
  [CIFS] Reduce cifs stack space usage
  [CIFS] lseek polling returned stale EOF

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits)
  [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro
  [MIPS] Fix warnings in run_uncached on 32bit kernel
  [MIPS] Comment fix
  [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.
  [MIPS] Alchemy:  Fix PCI-memory access
  [MIPS] Move .set reorder out of conditional code
  [MIPS] Check FCSR for pending interrupts before restoring from a context.
  [MIPS] Jaguar ATX: Fix large number of warnings.
  [MIPS] Jaguar: Fix MAC address detection after platform_device conversion.
  [MIPS] SMTC: Make a bunch of functions and variables static.
  [MIPS] Use compat_sys_pselect6
  [MIPS] SMTC: Cleanup idle hook invocation.
  [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
  [MIPS] IRIX: Linux coding style cleanups.
  [MIPS] PB1100: Fix pile of warnings
  [MIPS] Alchemy: Fix bunch of warnings
  [MIPS] Whitespace cleanups.
  [MIPS] Alchemy: Fix bunch more warnings.
  [MIPS] Use ARRAY_SIZE macro when appropriate
  [MIPS] Fix some whitespace damage
  ...

 Tildes as in path as in filenames are handled correctly now:
 only files, containing tilde '~', are backups, thus are not valid.

 [KJ]:
 Definition of `space' was removed, scripts/Kbuild.include has one.
 That definition was taken right from the GNU make manual, while Kbuild's
 version is original.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Bastian Blank <bastian@waldi.eu.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NOleg Verych <olecom@flower.upol.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 GNU binutils, root users, tmpfiles, external modules ro builds must
 be fixed to do the right thing now.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Horst Schirmeier <horst@schirmeier.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NOleg Verych <olecom@flower.upol.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  Replacing overhead of using some (external) programs
  instead of good old `sh'.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: William Stearns <wstearns@pobox.com>
Cc: Martin Schlemmer <azarah@nosferatu.za.org>
Signed-off-by: NOleg Verych <olecom@flower.upol.cz>
Acked-by: NMark Lord <lkml@rtr.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Missing tab.  Missing entry in changelog
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/lib/uncached.c: In function 'run_uncached':
arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type
arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The problem was introduced in 2.6.18.3 with the casting of some
36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.

With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
because the ioremap in arch/mips/au1000/common/pci.c already used the
truncated addresses.
With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
fails because the maximum iomem-address is 0xffffffff (32bit) but the
pci-memory-start-address is 0x440000000 (36bit).

To get pci working again, I propose the following patch:

1. remove the resource_size_t-casting from au1000.h again
2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).

With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.
Signed-off-by: NAlexander Bigga <ab@mycable.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>