Move the opregion unregistration earlier to match its corresponding
registration order.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-14-git-send-email-imre.deak@intel.com

Move the GTT,MSI IRQ cleanup later so that it matches their
corresponding init order. Also fix the order of these calls wrt. each
other to match their corresponding init order.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-13-git-send-email-imre.deak@intel.com

Move the power domain uninitialization later so that it matches its
corresponding init order. Since we access the HW during the later
unitialization steps keep a wake reference until after the last such
step.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-12-git-send-email-imre.deak@intel.com

We should register all the interfaces before we enable runtime PM.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-11-git-send-email-imre.deak@intel.com

According to the new init phases scheme we should register the driver
with frameworks/userspace only one the device is setup fully. So move
the shrinker registration later accordingly.

Also fix the shrinker unregistration order wrt. the acpi unregistration
to fix the corresponding init order.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-10-git-send-email-imre.deak@intel.com

We require the device to be powered only before accessing it, so we can
move this call later.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-9-git-send-email-imre.deak@intel.com

The only steps requiring device access is the fence and swizzling
initialization, so split these out keeping them in their current place
and move the rest of init steps earlier.

v2-v3:
- unchanged
v4:
- move call to i915_gem_detect_bit_6_swizzle() to
  i915_gem_load_init_fences() and preserve the original order of
  the detection of HW fence capailities wrt. swizzling (Chris)

CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458132843-21860-1-git-send-email-imre.deak@intel.com

This init step accesses the device, but doesn't have any device
specific side effect. It also sets up some platform specific
attributes that may be required early, so move it earlier.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-7-git-send-email-imre.deak@intel.com

Split out the part initing the clock gating hooks and move it earlier.
Add a new NOP hook for platforms without the need to apply clockgating
or workaround settings, so that the hook can be called unconditionally.
Also add a WARN for future platforms that forget to add a hook.

The rest of the hooks in intel_init_pm() should be inited in the same
way, but atm some of the hooks are set only conditionally, so before
doing this we need to make the setup unconditional and use instead some
flags.

v2:
- add a NOP hook and WARN if no hook is set for the platform (Chris)
- use the term hook instead of callback for these functions (Jani)
v3:
- remove the GEN4() check it's already covered by earlier platform
  checks (Chris)

CC: Jani Nikula <jani.nikula@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-6-git-send-email-imre.deak@intel.com

All of this is SW only initialization so we can move them earlier. Move
the mutex init where the rest of the locks are inited. While at it also
convert dev to dev_priv.

v2:
- use the term hook instead of callback for these functions (Jani)

CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-5-git-send-email-imre.deak@intel.com

Most of the IRQ init is setting up hooks so move that part earlier.
Leave the pm_qos_add_request() call in place.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-4-git-send-email-imre.deak@intel.com

These are all SW only init steps not accessing the device and they only
need the platform identification macros to work, which are already
available earlier, so move these init steps earlier.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-3-git-send-email-imre.deak@intel.com

MCHBAR is cleaned up in i915_mmio_cleanup(), so the separate call in
i915_driver_load() is incorrect.

CC: David Weinehall <david.weinehall@intel.com>
Fixes: ad5c3d3f ("drm/i915: Move MCHBAR setup earlier during init")
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-2-git-send-email-imre.deak@intel.com

In full gpu reset we prime all engines and reset domains corresponding to
each engine. Per engine reset is just a special case of this process
wherein only a single engine is reset. This change is aimed to modify
relevant functions to achieve this. There are some other steps we carry out
in case of engine reset which are addressed in later patches.

Reset func now accepts a mask of all engines that need to be reset. Where
per engine resets are supported, error handler populates the mask
accordingly otherwise all engines are specified.

v2: ALL_ENGINES mask fixup, better for_each_ring_masked (Chris)
v3: Whitespace fixes (Chris)
v4: Rebase due to s/ring/engine

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458143640-20563-1-git-send-email-mika.kuoppala@intel.com

We've been accumulating code across the driver that depends on the VBT
specific structures and defines. The VBT is an uncontrollable
beast. Encourage encapsulation of the VBT data by hiding the structures
and defines in a private header only to be included from intel_bios.c.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-7-git-send-email-jani.nikula@intel.com

drivers/gpu/drm/i915/intel_dpll_mgr.c:1200:32: warning: Using plain integer as NULL pointer

Fixes: 304b65cb ("drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c")
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458144418-20046-1-git-send-email-jani.nikula@intel.com

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-4-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>

Warn for the wrong mask in enable only. Disable will have the wrong mask now
because the new state is committed before disabling the old state.

Changes since v1:
- Use crtc_mask (Durgadoss)
- Rebase.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-3-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>

This makes it easier to verify correct dpll setup with only a single crtc.
It is also useful to detect double dpll enable/disable.

Changes since v1:
- Rebase on top of Ander's dpll rework.
- Change debugfs active to a mask.
- Change enabled_crtcs and active_crtcs to unsigned.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>

After unplugging a DP MST display from the system, we have to go through
and destroy all of the DRM connectors associated with it since none of
them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector()
doesn't do a good enough job of ensuring that throughout the destruction
process that no modesettings can be done with the connectors. As it is
right now, intel_dp_destroy_mst_connector() works like this:

* Take all modeset locks
* Clear the configuration of the crtc on the connector, if there is one
* Drop all modeset locks, this is required because of circular
  dependency issues that arise with trying to remove the connector from
  sysfs with modeset locks held
* Unregister the connector
* Take all modeset locks, again
* Do the rest of the required cleaning for destroying the connector
* Finally drop all modeset locks for good

This only works sometimes. During the destruction process, it's very
possible that a userspace application will attempt to do a modesetting
using the connector. When we drop the modeset locks, an ioctl handler
such as drm_mode_setcrtc has the oppurtunity to take all of the modeset
locks from us. When this happens, one thing leads to another and
eventually we end up committing a mode with the non-existent connector:

	[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training
	[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
	[drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization
	[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f
	[drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi

And in some cases, such as with the T460s using an MST dock, this
results in breaking modesetting and/or panicking the system.

To work around this, we now unregister the connector at the very
beginning of intel_dp_destroy_mst_connector(), grab all the modesetting
locks, and then hold them until we finish the rest of the function.

CC: stable@vger.kernel.org
Signed-off-by: NLyude <cpaul@redhat.com>
Signed-off-by: NRob Clark <rclark@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458155884-13877-1-git-send-email-cpaul@redhat.com

This version of GuC firmware fixes the engine reset issue where golden
context LRC address is treated as page index by mistake. It also fixes
the problem that scheduler stops submiting to one engine when the other
engine work queue is full.
Signed-off-by: NAlex Dai <yu.dai@intel.com>
Reviewed-by: NDave Gordon <david.s.gordon@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Favor a single point of truth instead of duplicating the
information. The change also filters out unsupported DSI ports at this
stage, accepting only ports A and C, instead of waiting until the port
checks.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-6-git-send-email-jani.nikula@intel.com

Use the connector type instead of VBT directly to decide which backlight
mechanism to use on VLV/CHV. (Indirectly, this is the same thing, but
hides the VBT use.)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-5-git-send-email-jani.nikula@intel.com

Hide knowledge about VBT child devices in intel_bios.c.

v2: Move port check to intel_bios.c (Sivakumar)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-4-git-send-email-jani.nikula@intel.com

Hide knowledge about VBT child devices in intel_bios.c.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-3-git-send-email-jani.nikula@intel.com

Hide knowledge about VBT child devices in intel_bios.c.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-2-git-send-email-jani.nikula@intel.com

Hide knowledge about VBT child devices in intel_bios.c.

v2: also move int_tv_support check to intel_bios.c (Sivakumar)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-1-git-send-email-jani.nikula@intel.com

BXT isn't as limited as BYT and CHT regarding DSI pipes and ports.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8bea85b86aaf7a15f854a656bf8d3208a3afe0bd.1458070700.git.jani.nikula@intel.com

Make the code easier to read and update. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/04b20a9be6a9481ca2eb2a42cdcdc27358152e5f.1458070700.git.jani.nikula@intel.com

Nicer for eDP (actually "EDP" instead of "D"), and makes future
expansion for DSI transcoders easier.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2ac55ed584e450fe154daecb6453dff8eede5e7d.1458070700.git.jani.nikula@intel.com

Same as for_each_dsi_port, but for general use. Leave the
for_each_dsi_port version around as an "alias" for now to not cause too
much churn. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a0ef5bf33395e1fcd87178b17d6687b022042cf7.1458070700.git.jani.nikula@intel.com

A small step moving us closer to DRM MIPI DSI code. Use enum
mipi_dsi_pixel_format instead of our own. The first benefit is being
able to use common mipi_dsi_pixel_format_to_bpp().

There's a little back and forth conversion with the VBT -> enum ->
register, since we have just shoved the VBT value into the register
directly. Longer term, all the VBT parsing and deciphering should be
done in intel_bios.c, and abstracted there.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-2-git-send-email-jani.nikula@intel.com

The enum mipi_dsi_pixel_format defines MIPI_DSI_FMT_RGB666 for the
"loose" 24 bpp format and MIPI_DSI_FMT_RGB666_PACKED for the 18 bpp
format. We have this the other way round, defining a loose version for
24 bpp.

Follow suit with what's in enum mipi_dsi_pixel_format to avoid future
confusion. Rename

VID_MODE_FORMAT_RGB666 -> VID_MODE_FORMAT_RGB666_PACKED
VID_MODE_FORMAT_RGB666_LOOSE -> VID_MODE_FORMAT_RGB666
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-1-git-send-email-jani.nikula@intel.com

If the firmware is generic and has a run-anywhere mode, enable it rather
than completely failing on unknown HW revisions.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457352357-8433-1-git-send-email-chris@chris-wilson.co.uk

Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915
drm driver: "enable_dp_mst", which is enabled by default.  Disabling the
parameter forces newly connected DisplayPort sinks to report as not
supporting multi-stream transport (MST), thus "forcing" the use of
single-stream transport (SST).

v2: rename parameter to conform to style
v3: add signoff
Signed-off-by: NNathan Schulte <nmschulte@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com

This time using only sed and a few by hand.

v2: Rename also intel_ring_id and intel_ring_initialized.
v3: Fixed typo in intel_ring_initialized.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458126040-33105-1-git-send-email-tvrtko.ursulin@linux.intel.com

Some trivial ones, first pass done with Coccinelle:

@@
@@
(
- I915_NUM_RINGS
+ I915_NUM_ENGINES
|
- intel_ring_flag
+ intel_engine_flag
|
- for_each_ring
+ for_each_engine
|
- i915_gem_request_get_ring
+ i915_gem_request_get_engine
|
- intel_ring_idle
+ intel_engine_idle
|
- i915_gem_reset_ring_status
+ i915_gem_reset_engine_status
|
- i915_gem_reset_ring_cleanup
+ i915_gem_reset_engine_cleanup
|
- init_ring_lists
+ init_engine_lists
)

But that didn't fully work so I cleaned it up with:

for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done
for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done

v2: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

below and a couple manual fixups.

@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs *J;
+ struct intel_engine_cs *engine;
...
}
@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs J;
+ struct intel_engine_cs engine;
...
}
@@
struct drm_i915_private *d;
@@
(
- d->ring
+ d->engine
)
@@
struct i915_execbuffer_params *p;
@@
(
- p->ring
+ p->engine
)
@@
struct intel_ringbuffer *r;
@@
(
- r->ring
+ r->engine
)
@@
struct drm_i915_gem_request *req;
@@
(
- req->ring
+ req->engine
)

v2: Script missed the tracepoint code - fixed up by hand.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

@@
identifier func;
@@
func(..., struct intel_engine_cs *
- ring
+ engine
, ...)
{
<...
- ring
+ engine
...>
}
@@
identifier func;
type T;
@@
T func(..., struct intel_engine_cs *
- ring
+ engine
, ...);
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Done by the Coccinelle script below plus a manual
intervention to GEN8_RING_SEMAPHORE_INIT.

@@
expression E;
@@
- struct intel_engine_cs *ring = E;
+ struct intel_engine_cs *engine = E;
<+...
- ring
+ engine
...+>
@@
@@
- struct intel_engine_cs *ring;
+ struct intel_engine_cs *engine;
<+...
- ring
+ engine
...+>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>