oom_scan_process_thread() does not use totalpages argument.
oom_badness() uses it.

Link: http://lkml.kernel.org/r/1463796041-7889-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unix sockets can consume a significant amount of system memory, hence
they should be accounted to kmemcg.

Since unix socket buffers are always allocated from process context, all
we need to do to charge them to kmemcg is set __GFP_ACCOUNT in
sock->sk_allocation mask.

Eric asked:

> 1) What happens when a buffer, allocated from socket <A> lands in a
> different socket <B>, maybe owned by another user/process.
>
> Who owns it now, in term of kmemcg accounting ?

We never move memcg charges.  E.g.  if two processes from different
cgroups are sharing a memory region, each page will be charged to the
process which touched it first.  Or if two processes are working with
the same directory tree, inodes and dentries will be charged to the
first user.  The same is fair for unix socket buffers - they will be
charged to the sender.

> 2) Has performance impact been evaluated ?

I ran netperf STREAM_STREAM with default options in a kmemcg on a 4 core
x2 HT box.  The results are below:

 # clients            bandwidth (10^6bits/sec)
                    base              patched
         1      67643 +-  725      64874 +-  353    - 4.0 %
         4     193585 +- 2516     186715 +- 1460    - 3.5 %
         8     194820 +-  377     187443 +- 1229    - 3.7 %

So the accounting doesn't come for free - it takes ~4% of performance.
I believe we could optimize it by using per cpu batching not only on
charge, but also on uncharge in memcg core, but that's beyond the scope
of this patch set - I'll take a look at this later.

Anyway, if performance impact is found to be unacceptable, it is always
possible to disable kmem accounting at boot time (cgroup.memory=nokmem)
or not use memory cgroups at runtime at all (thanks to jump labels
there'll be no overhead even if they are compiled in).

Link: http://lkml.kernel.org/r/fcfe6cae27a59fbc5e40145664b3cf085a560c68.1464079538.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pipes can consume a significant amount of system memory, hence they
should be accounted to kmemcg.

This patch marks pipe_inode_info and anonymous pipe buffer page
allocations as __GFP_ACCOUNT so that they would be charged to kmemcg.
Note, since a pipe buffer page can be "stolen" and get reused for other
purposes, including mapping to userspace, we clear PageKmemcg thus
resetting page->_mapcount and uncharge it in anon_pipe_buf_steal, which
is introduced by this patch.

A note regarding anon_pipe_buf_steal implementation.  We allow to steal
the page if its ref count equals 1.  It looks racy, but it is correct
for anonymous pipe buffer pages, because:

 - We lock out all other pipe users, because ->steal is called with
   pipe_lock held, so the page can't be spliced to another pipe from
   under us.

 - The page is not on LRU and it never was.

 - Thus a parallel thread can access it only by PFN. Although this is
   quite possible (e.g. see page_idle_get_page and balloon_page_isolate)
   this is not dangerous, because all such functions do is increase page
   ref count, check if the page is the one they are looking for, and
   decrease ref count if it isn't. Since our page is clean except for
   PageKmemcg mark, which doesn't conflict with other _mapcount users,
   the worst that can happen is we see page_count > 2 due to a transient
   ref, in which case we false-positively abort ->steal, which is still
   fine, because ->steal is not guaranteed to succeed.

Link: http://lkml.kernel.org/r/20160527150313.GD26059@esperanzaSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page tables can bite a relatively big chunk off system memory and their
allocations are easy to trigger from userspace, so they should be
accounted to kmemcg.

This patch marks page table allocations as __GFP_ACCOUNT for x86.  Note
we must not charge allocations of kernel page tables, because they can
be shared among processes from different cgroups so accounting them to a
particular one can pin other cgroups for indefinitely long.  So we clear
__GFP_ACCOUNT flag if a page table is allocated for the kernel.

Link: http://lkml.kernel.org/r/7d5c54f6a2bcbe76f03171689440003d87e6c742.1464079538.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page table pages are batched-freed in release_pages on most
architectures.  If we want to charge them to kmemcg (this is what is
done later in this series), we need to teach mem_cgroup_uncharge_list to
handle kmem pages.

Link: http://lkml.kernel.org/r/18d5c09e97f80074ed25b97a7d0f32b95d875717.1464079538.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, to charge a non-slab allocation to kmemcg one has to use
alloc_kmem_pages helper with __GFP_ACCOUNT flag.  A page allocated with
this helper should finally be freed using free_kmem_pages, otherwise it
won't be uncharged.

This API suits its current users fine, but it turns out to be impossible
to use along with page reference counting, i.e.  when an allocation is
supposed to be freed with put_page, as it is the case with pipe or unix
socket buffers.

To overcome this limitation, this patch moves charging/uncharging to
generic page allocator paths, i.e.  to __alloc_pages_nodemask and
free_pages_prepare, and zaps alloc/free_kmem_pages helpers.  This way,
one can use any of the available page allocation functions to get the
allocated page charged to kmemcg - it's enough to pass __GFP_ACCOUNT,
just like in case of kmalloc and friends.  A charged page will be
automatically uncharged on free.

To make it possible, we need to mark pages charged to kmemcg somehow.
To avoid introducing a new page flag, we make use of page->_mapcount for
marking such pages.  Since pages charged to kmemcg are not supposed to
be mapped to userspace, it should work just fine.  There are other
(ab)users of page->_mapcount - buddy and balloon pages - but we don't
conflict with them.

In case kmemcg is compiled out or not used at runtime, this patch
introduces no overhead to generic page allocator paths.  If kmemcg is
used, it will be plus one gfp flags check on alloc and plus one
page->_mapcount check on free, which shouldn't hurt performance, because
the data accessed are hot.

Link: http://lkml.kernel.org/r/a9736d856f895bcb465d9f257b54efe32eda6f99.1464079538.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - Handle memcg_kmem_enabled check out to the caller. This reduces the
   number of function definitions making the code easier to follow. At
   the same time it doesn't result in code bloat, because all of these
   functions are used only in one or two places.

 - Move __GFP_ACCOUNT check to the caller as well so that one wouldn't
   have to dive deep into memcg implementation to see which allocations
   are charged and which are not.

 - Refresh comments.

Link: http://lkml.kernel.org/r/52882a28b542c1979fd9a033b4dc8637fc347399.1464079537.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - Add a proper comment to page->_mapcount.

 - Introduce a macro for generating helper functions.

 - Place all special page->_mapcount values next to each other so that
   readers can see all possible values and so we don't get duplicates.

Link: http://lkml.kernel.org/r/502f49000e0b63e6c62e338fac6b420bf34fb526.1464079537.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset implements per kmemcg accounting of page tables
(x86-only), pipe buffers, and unix socket buffers.

Patches 1-3 are just cleanups that are not supposed to introduce any
functional changes.  Patches 4 and 5 move charge/uncharge to generic
page allocator paths for the sake of accounting pipe and unix socket
buffers.  Patches 5-7 make x86 page tables, pipe buffers, and unix
socket buffers accountable.

This patch (of 8):

... to reduce indentation level thus leaving more space for comments.

Link: http://lkml.kernel.org/r/f34ffe70fce2b0b9220856437f77972d67c14275.1464079537.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows an arch which needs to do special handing with respect to
different page size when flushing tlb to implement the same in mmu
gather.

Link: http://lkml.kernel.org/r/1465049193-22197-3-git-send-email-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This updates the generic and arch specific implementation to return true
if we need to do a tlb flush.  That means if a __tlb_remove_page
indicate a flush is needed, the page we try to remove need to be tracked
and added again after the flush.  We need to track it because we have
already update the pte to none and we can't just loop back.

This change is done to enable us to do a tlb_flush when we try to flush
a range that consists of different page sizes.  For architectures like
ppc64, we can do a range based tlb flush and we need to track page size
for that.  When we try to remove a huge page, we will force a tlb flush
and starts a new mmu gather.

[aneesh.kumar@linux.vnet.ibm.com: mm-change-the-interface-for-__tlb_remove_page-v3]
  Link: http://lkml.kernel.org/r/1465049193-22197-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1464860389-29019-2-git-send-email-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For hugetlb like THP (and unlike regular page), we do tlb flush after
dropping ptl.  Because of the above, we don't need to track force_flush
like we do now.  Instead we can simply call tlb_remove_page() which will
do the flush if needed.

No functionality change in this patch.

Link: http://lkml.kernel.org/r/1465049193-22197-1-git-send-email-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

split_huge_pmd() doesn't guarantee that the pmd is normal pmd pointing
to pte entries, which can be checked with pmd_trans_unstable().  Some
callers make this assertion and some do it differently and some not, so
let's do it in a unified manner.

Link: http://lkml.kernel.org/r/1464741400-12143-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When there is an isolated_page, post_alloc_hook() is called with page
but __free_pages() is called with isolated_page.  Since they are the
same so no problem but it's very confusing.  To reduce it, this patch
changes isolated_page to boolean type and uses page variable
consistently.

Link: http://lkml.kernel.org/r/1466150259-27727-10-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is motivated from Hugh and Vlastimil's concern [1].

There are two ways to get freepage from the allocator.  One is using
normal memory allocation API and the other is __isolate_free_page()
which is internally used for compaction and pageblock isolation.  Later
usage is rather tricky since it doesn't do whole post allocation
processing done by normal API.

One problematic thing I already know is that poisoned page would not be
checked if it is allocated by __isolate_free_page().  Perhaps, there
would be more.

We could add more debug logic for allocated page in the future and this
separation would cause more problem.  I'd like to fix this situation at
this time.  Solution is simple.  This patch commonize some logic for
newly allocated page and uses it on all sites.  This will solve the
problem.

[1] http://marc.info/?i=alpine.LSU.2.11.1604270029350.7066%40eggly.anvils%3E

[iamjoonsoo.kim@lge.com: mm-page_alloc-introduce-post-allocation-processing-on-page-allocator-v3]
  Link: http://lkml.kernel.org/r/1464230275-25791-7-git-send-email-iamjoonsoo.kim@lge.com
  Link: http://lkml.kernel.org/r/1466150259-27727-9-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1464230275-25791-7-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, we store each page's allocation stacktrace on corresponding
page_ext structure and it requires a lot of memory.  This causes the
problem that memory tight system doesn't work well if page_owner is
enabled.  Moreover, even with this large memory consumption, we cannot
get full stacktrace because we allocate memory at boot time and just
maintain 8 stacktrace slots to balance memory consumption.  We could
increase it to more but it would make system unusable or change system
behaviour.

To solve the problem, this patch uses stackdepot to store stacktrace.
It obviously provides memory saving but there is a drawback that
stackdepot could fail.

stackdepot allocates memory at runtime so it could fail if system has
not enough memory.  But, most of allocation stack are generated at very
early time and there are much memory at this time.  So, failure would
not happen easily.  And, one failure means that we miss just one page's
allocation stacktrace so it would not be a big problem.  In this patch,
when memory allocation failure happens, we store special stracktrace
handle to the page that is failed to save stacktrace.  With it, user can
guess memory usage properly even if failure happens.

Memory saving looks as following.  (4GB memory system with page_owner)
(before the patch -> after the patch)

static allocation:
92274688 bytes -> 25165824 bytes

dynamic allocation after boot + kernel build:
0 bytes -> 327680 bytes

total:
92274688 bytes -> 25493504 bytes

72% reduction in total.

Note that implementation looks complex than someone would imagine
because there is recursion issue.  stackdepot uses page allocator and
page_owner is called at page allocation.  Using stackdepot in page_owner
could re-call page allcator and then page_owner.  That is a recursion.
To detect and avoid it, whenever we obtain stacktrace, recursion is
checked and page_owner is set to dummy information if found.  Dummy
information means that this page is allocated for page_owner feature
itself (such as stackdepot) and it's understandable behavior for user.

[iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3]
  Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com
  Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page owner will be changed to store more deep stacktrace so current
temporary buffer size isn't enough.  Increase it.

Link: http://lkml.kernel.org/r/1464230275-25791-5-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

split_page() calls set_page_owner() to set up page_owner to each pages.
But, it has a drawback that head page and the others have different
stacktrace because callsite of set_page_owner() is slightly differnt.
To avoid this problem, this patch copies head page's page_owner to the
others.  It needs to introduce new function, split_page_owner() but it
also remove the other function, get_page_owner_gfp() so looks good to
do.

Link: http://lkml.kernel.org/r/1464230275-25791-4-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, copy_page_owner() doesn't copy all the owner information.  It
skips last_migrate_reason because copy_page_owner() is used for
migration and it will be properly set soon.  But, following patch will
use copy_page_owner() and this skip will cause the problem that
allocated page has uninitialied last_migrate_reason.  To prevent it,
this patch also copy last_migrate_reason in copy_page_owner().

Link: http://lkml.kernel.org/r/1464230275-25791-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's not necessary to initialized page_owner with holding the zone lock.
It would cause more contention on the zone lock although it's not a big
problem since it is just debug feature.  But, it is better than before
so do it.  This is also preparation step to use stackdepot in page owner
feature.  Stackdepot allocates new pages when there is no reserved space
and holding the zone lock in this case will cause deadlock.

Link: http://lkml.kernel.org/r/1464230275-25791-2-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't need to split freepages with holding the zone lock.  It will
cause more contention on zone lock so not desirable.

[rientjes@google.com: if __isolate_free_page() fails, avoid adding to freelist so we don't call map_pages() with it]
  Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606211447001.43430@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/1464230275-25791-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static check warns using tag as bit shifter.  It doesn't break current
working but not good for redability.  Let's use OBJ_TAG_BIT as bit
shifter instead of OBJ_ALLOCATED_TAG.

Link: http://lkml.kernel.org/r/20160607045146.GF26230@bboxSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Zsmalloc is ready for page migration so zram can use __GFP_MOVABLE from
now on.

I did test to see how it helps to make higher order pages.  Test
scenario is as follows.

KVM guest, 1G memory, ext4 formated zram block device,

  for i in `seq 1 8`;
  do
          dd if=/dev/vda1 of=mnt/test$i.txt bs=128M count=1 &
  done

  wait `pidof dd`

  for i in `seq 1 2 8`;
  do
          rm -rf mnt/test$i.txt
  done
  fstrim -v mnt

  echo "init"
  cat /proc/buddyinfo

  echo "compaction"
  echo 1 > /proc/sys/vm/compact_memory
  cat /proc/buddyinfo

old:

  init
  Node 0, zone      DMA    208    120     51     41     11      0      0      0      0      0      0
  Node 0, zone    DMA32  16380  13777   9184   3805    789     54      3      0      0      0      0
  compaction
  Node 0, zone      DMA    132     82     40     39     16      2      1      0      0      0      0
  Node 0, zone    DMA32   5219   5526   4969   3455   1831    677    139     15      0      0      0

new:

  init
  Node 0, zone      DMA    379    115     97     19      2      0      0      0      0      0      0
  Node 0, zone    DMA32  18891  16774  10862   3947    637     21      0      0      0      0      0
  compaction
  Node 0, zone      DMA    214     66     87     29     10      3      0      0      0      0      0
  Node 0, zone    DMA32   1612   3139   3154   2469   1745    990    384     94      7      0      0

As you can see, compaction made so many high-order pages. Yay!

Link: http://lkml.kernel.org/r/1464736881-24886-13-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch introduces run-time migration feature for zspage.

For migration, VM uses page.lru field so it would be better to not use
page.next field which is unified with page.lru for own purpose.  For
that, firstly, we can get first object offset of the page via runtime
calculation instead of using page.index so we can use page.index as link
for page chaining instead of page.next.

In case of huge object, it stores handle to page.index instead of next
link of page chaining because huge object doesn't need to next link for
page chaining.  So get_next_page need to identify huge object to return
NULL.  For it, this patch uses PG_owner_priv_1 flag of the page flag.

For migration, it supports three functions

* zs_page_isolate

It isolates a zspage which includes a subpage VM want to migrate from
class so anyone cannot allocate new object from the zspage.

We could try to isolate a zspage by the number of subpage so subsequent
isolation trial of other subpage of the zpsage shouldn't fail.  For
that, we introduce zspage.isolated count.  With that, zs_page_isolate
can know whether zspage is already isolated or not for migration so if
it is isolated for migration, subsequent isolation trial can be
successful without trying further isolation.

* zs_page_migrate

First of all, it holds write-side zspage->lock to prevent migrate other
subpage in zspage.  Then, lock all objects in the page VM want to
migrate.  The reason we should lock all objects in the page is due to
race between zs_map_object and zs_page_migrate.

  zs_map_object				zs_page_migrate

  pin_tag(handle)
  obj = handle_to_obj(handle)
  obj_to_location(obj, &page, &obj_idx);

					write_lock(&zspage->lock)
					if (!trypin_tag(handle))
						goto unpin_object

  zspage = get_zspage(page);
  read_lock(&zspage->lock);

If zs_page_migrate doesn't do trypin_tag, zs_map_object's page can be
stale by migration so it goes crash.

If it locks all of objects successfully, it copies content from old page
to new one, finally, create new zspage chain with new page.  And if it's
last isolated subpage in the zspage, put the zspage back to class.

* zs_page_putback

It returns isolated zspage to right fullness_group list if it fails to
migrate a page.  If it find a zspage is ZS_EMPTY, it queues zspage
freeing to workqueue.  See below about async zspage freeing.

This patch introduces asynchronous zspage free.  The reason to need it
is we need page_lock to clear PG_movable but unfortunately, zs_free path
should be atomic so the apporach is try to grab page_lock.  If it got
page_lock of all of pages successfully, it can free zspage immediately.
Otherwise, it queues free request and free zspage via workqueue in
process context.

If zs_free finds the zspage is isolated when it try to free zspage, it
delays the freeing until zs_page_putback finds it so it will free free
the zspage finally.

In this patch, we expand fullness_list from ZS_EMPTY to ZS_FULL.  First
of all, it will use ZS_EMPTY list for delay freeing.  And with adding
ZS_FULL list, it makes to identify whether zspage is isolated or not via
list_empty(&zspage->list) test.

[minchan@kernel.org: zsmalloc: keep first object offset in struct page]
  Link: http://lkml.kernel.org/r/1465788015-23195-1-git-send-email-minchan@kernel.org
[minchan@kernel.org: zsmalloc: zspage sanity check]
  Link: http://lkml.kernel.org/r/20160603010129.GC3304@bbox
Link: http://lkml.kernel.org/r/1464736881-24886-12-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Zsmalloc stores first free object's <PFN, obj_idx> position into freeobj
in each zspage.  If we change it with index from first_page instead of
position, it makes page migration simple because we don't need to
correct other entries for linked list if a page is migrated out.

Link: http://lkml.kernel.org/r/1464736881-24886-11-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, putback_zspage does free zspage under class->lock if fullness
become ZS_EMPTY but it makes trouble to implement locking scheme for new
zspage migration.  So, this patch is to separate free_zspage from
putback_zspage and free zspage out of class->lock which is preparation
for zspage migration.

Link: http://lkml.kernel.org/r/1464736881-24886-10-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have squeezed meta data of zspage into first page's descriptor.  So,
to get meta data from subpage, we should get first page first of all.
But it makes trouble to implment page migration feature of zsmalloc
because any place where to get first page from subpage can be raced with
first page migration.  IOW, first page it got could be stale.  For
preventing it, I have tried several approahces but it made code
complicated so finally, I concluded to separate metadata from first
page.  Of course, it consumes more memory.  IOW, 16bytes per zspage on
32bit at the moment.  It means we lost 1% at *worst case*(40B/4096B)
which is not bad I think at the cost of maintenance.

Link: http://lkml.kernel.org/r/1464736881-24886-9-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For page migration, we need to create page chain of zspage dynamically
so this patch factors it out from alloc_zspage.

Link: http://lkml.kernel.org/r/1464736881-24886-8-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Upcoming patch will change how to encode zspage meta so for easy review,
this patch wraps code to access metadata as accessor.

Link: http://lkml.kernel.org/r/1464736881-24886-7-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use kernel standard bit spin-lock instead of custom mess.  Even, it has
a bug which doesn't disable preemption.  The reason we don't have any
problem is that we have used it during preemption disable section by
class->lock spinlock.  So no need to go to stable.

Link: http://lkml.kernel.org/r/1464736881-24886-6-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every zspage in a size_class has same number of max objects so we could
move it to a size_class.

Link: http://lkml.kernel.org/r/1464736881-24886-5-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, VM has a feature to migrate non-lru movable pages so balloon
doesn't need custom migration hooks in migrate.c and compaction.c.

Instead, this patch implements the page->mapping->a_ops->
{isolate|migrate|putback} functions.

With that, we could remove hooks for ballooning in general migration
functions and make balloon compaction simple.

[akpm@linux-foundation.org: compaction.h requires that the includer first include node.h]
Link: http://lkml.kernel.org/r/1464736881-24886-4-git-send-email-minchan@kernel.orgSigned-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have allowed migration for only LRU pages until now and it was enough
to make high-order pages.  But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,.  enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.

So, this patch is to support facility to change non-movable pages with
movable.  For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.

If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.

1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);

What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully.  On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation.  If a driver cannot isolate the page, it should
return *false*.

Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.

2. int (*migratepage) (struct address_space *mapping,
		struct page *newpage, struct page *oldpage, enum migrate_mode);

After isolation, VM calls migratepage of driver with isolated page.  The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage.  Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0.  If driver cannot migrate the page at the
moment, driver can return -EAGAIN.  On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure".  On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.

Driver shouldn't touch page.lru field VM using in the functions.

3. void (*putback_page)(struct page *);

If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page.  In this function, driver should put the isolated page back to the
own data structure.

4. non-lru movable page flags

There are two page flags for supporting non-lru movable page.

* PG_movable

Driver should use the below function to make page movable under
page_lock.

	void __SetPageMovable(struct page *page, struct address_space *mapping)

It needs argument of address_space for registering migration family
functions which will be called by VM.  Exactly speaking, PG_movable is
not a real flag of struct page.  Rather than, VM reuses page->mapping's
lower bits to represent it.

	#define PAGE_MAPPING_MOVABLE 0x2
	page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;

so driver shouldn't access page->mapping directly.  Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.

For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page.  As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable).  But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated.  Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping.  It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.

For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page.  The lock_page prevents
sudden destroying of page->mapping.

Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.

* PG_isolated

To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page.  So if a CPU encounters PG_isolated
non-lru movable page, it can skip it.  Driver doesn't need to manipulate
the flag because VM will set/clear it automatically.  Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field.  PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.

[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
  Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.orgSigned-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.

The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages.  In the end, compaction cannot work well so reclaimer
shrinks all of working set pages.  It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.

Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient.  In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.

To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.

struct address_space_operations {
	..
	..
	bool (*isolate_page)(struct page *, isolate_mode_t);
	void (*putback_page)(struct page *);
	..
}

new page flags

	PG_movable
	PG_isolated

For details, please read description in "mm: migrate: support non-lru
movable page migration".

Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work.  I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.

And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him.  :)

Thanks, Gioh, Konstantin and Chulmin!

This patchset consists of five parts.

1. clean up migration
  mm: use put_page to free page instead of putback_lru_page

2. add non-lru page migration feature
  mm: migrate: support non-lru movable page migration

3. rework KVM memory-ballooning
  mm: balloon: use general non-lru movable page feature

4. zsmalloc refactoring for preparing page migration
  zsmalloc: keep max_object in size_class
  zsmalloc: use bit_spin_lock
  zsmalloc: use accessor
  zsmalloc: factor page chain functionality out
  zsmalloc: introduce zspage structure
  zsmalloc: separate free_zspage from putback_zspage
  zsmalloc: use freeobj for index

5. zsmalloc page migration
  zsmalloc: page migration support
  zram: use __GFP_MOVABLE for memory allocation

This patch (of 12):

Procedure of page migration is as follows:

First of all, it should isolate a page from LRU and try to migrate the
page.  If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.

For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list.  It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list.  However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations.  It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.

To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.

So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure.  That makes code more readable and
doesn't add overhead in put_page.

Comment from Vlastimil
 "Yeah, and compaction (perhaps also other migration users) has to drain
  the lru pvec...  Getting rid of this stuff is worth even by itself."

Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We now allocate streams from CPU_UP hot-plug path, there are no
context-dependent stream allocations anymore and we can schedule from
zcomp_strm_alloc().  Use GFP_KERNEL directly and drop a gfp_t parameter.

Link: http://lkml.kernel.org/r/20160531122017.2878-9-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add "deflate", "lz4hc", "842" algorithms to the list of known
compression backends.  The real availability of those algorithms,
however, depends on the corresponding CONFIG_CRYPTO_FOO config options.

[sergey.senozhatsky@gmail.com: zram-add-more-compression-algorithms-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-7-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-8-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove lzo/lz4 backends, we use crypto API now.

[sergey.senozhatsky@gmail.com: zram-delete-custom-lzo-lz4-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-6-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-7-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zram documentation is a mix of different styles: spaces, tabs, tabs +
spaces, etc.  Clean it up.

Link: http://lkml.kernel.org/r/20160531122017.2878-6-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no way to get a string with all the crypto comp algorithms
supported by the crypto comp engine, so we need to maintain our own
backends list.  At the same time we additionally need to use
crypto_has_comp() to make sure that the user has requested a compression
algorithm that is recognized by the crypto comp engine.  Relying on
/proc/crypto is not an options here, because it does not show
not-yet-inserted compression modules.

Example:

 modprobe zram
 cat /proc/crypto | grep -i lz4
 modprobe lz4
 cat /proc/crypto | grep -i lz4
name         : lz4
driver       : lz4-generic
module       : lz4

So the user can't tell exactly if the lz4 is really supported from
/proc/crypto output, unless someone or something has loaded it.

This patch also adds crypto_has_comp() to zcomp_available_show().  We
store all the compression algorithms names in zcomp's `backends' array,
regardless the CONFIG_CRYPTO_FOO configuration, but show only those that
are also supported by crypto engine.  This helps user to know the exact
list of compression algorithms that can be used.

Example:
  module lz4 is not loaded yet, but is supported by the crypto
  engine. /proc/crypto has no information on this module, while
  zram's `comp_algorithm' lists it:

 cat /proc/crypto | grep -i lz4

 cat /sys/block/zram0/comp_algorithm
[lzo] lz4 deflate lz4hc 842

We still use the `backends' array to determine if the requested
compression backend is known to crypto api.  This array, however, may not
contain some entries, therefore as the last step we call crypto_has_comp()
function which attempts to insmod the requested compression algorithm to
determine if crypto api supports it.  The advantage of this method is that
now we permit the usage of out-of-tree crypto compression modules
(implementing S/W or H/W compression).

[sergey.senozhatsky@gmail.com: zram-use-crypto-api-to-check-alg-availability-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-4-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-5-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't have an idle zstreams list anymore and our write path now works
absolutely differently, preventing preemption during compression.  This
removes possibilities of read paths preempting writes at wrong places
(which could badly affect the performance of both paths) and at the same
time opens the door for a move from custom LZO/LZ4 compression backends
implementation to a more generic one, using crypto compress API.

Joonsoo Kim [1] attempted to do this a while ago, but faced with the
need of introducing a new crypto API interface.  The root cause was the
fact that crypto API compression algorithms require a compression stream
structure (in zram terminology) for both compression and decompression
ops, while in reality only several of compression algorithms really need
it.  This resulted in a concept of context-less crypto API compression
backends [2].  Both write and read paths, though, would have been
executed with the preemption enabled, which in the worst case could have
resulted in a decreased worst-case performance, e.g.  consider the
following case:

	CPU0

	zram_write()
	  spin_lock()
	    take the last idle stream
	  spin_unlock()

	<< preempted >>

		zram_read()
		  spin_lock()
		   no idle streams
			  spin_unlock()
			  schedule()

	resuming zram_write compression()

but it took me some time to realize that, and it took even longer to
evolve zram and to make it ready for crypto API.  The key turned out to be
-- drop the idle streams list entirely.  Without the idle streams list we
are free to use compression algorithms that require compression stream for
decompression (read), because streams are now placed in per-cpu data and
each write path has to disable preemption for compression op, almost
completely eliminating the aforementioned case (technically, we still have
a small chance, because write path has a fast and a slow paths and the
slow path is executed with the preemption enabled; but the frequency of
failed fast path is too low).

TEST
====

- 4 CPUs, x86_64 system
- 3G zram, lzo
- fio tests: read, randread, write, randwrite, rw, randrw

test script [3] command:
 ZRAM_SIZE=3G LOG_SUFFIX=XXXX FIO_LOOPS=5 ./zram-fio-test.sh

                   BASE           PATCHED
jobs1
READ:           2527.2MB/s	 2482.7MB/s
READ:           2102.7MB/s	 2045.0MB/s
WRITE:          1284.3MB/s	 1324.3MB/s
WRITE:          1080.7MB/s	 1101.9MB/s
READ:           430125KB/s	 437498KB/s
WRITE:          430538KB/s	 437919KB/s
READ:           399593KB/s	 403987KB/s
WRITE:          399910KB/s	 404308KB/s
jobs2
READ:           8133.5MB/s	 7854.8MB/s
READ:           7086.6MB/s	 6912.8MB/s
WRITE:          3177.2MB/s	 3298.3MB/s
WRITE:          2810.2MB/s	 2871.4MB/s
READ:           1017.6MB/s	 1023.4MB/s
WRITE:          1018.2MB/s	 1023.1MB/s
READ:           977836KB/s	 984205KB/s
WRITE:          979435KB/s	 985814KB/s
jobs3
READ:           13557MB/s	 13391MB/s
READ:           11876MB/s	 11752MB/s
WRITE:          4641.5MB/s	 4682.1MB/s
WRITE:          4164.9MB/s	 4179.3MB/s
READ:           1453.8MB/s	 1455.1MB/s
WRITE:          1455.1MB/s	 1458.2MB/s
READ:           1387.7MB/s	 1395.7MB/s
WRITE:          1386.1MB/s	 1394.9MB/s
jobs4
READ:           20271MB/s	 20078MB/s
READ:           18033MB/s	 17928MB/s
WRITE:          6176.8MB/s	 6180.5MB/s
WRITE:          5686.3MB/s	 5705.3MB/s
READ:           2009.4MB/s	 2006.7MB/s
WRITE:          2007.5MB/s	 2004.9MB/s
READ:           1929.7MB/s	 1935.6MB/s
WRITE:          1926.8MB/s	 1932.6MB/s
jobs5
READ:           18823MB/s	 19024MB/s
READ:           18968MB/s	 19071MB/s
WRITE:          6191.6MB/s	 6372.1MB/s
WRITE:          5818.7MB/s	 5787.1MB/s
READ:           2011.7MB/s	 1981.3MB/s
WRITE:          2011.4MB/s	 1980.1MB/s
READ:           1949.3MB/s	 1935.7MB/s
WRITE:          1940.4MB/s	 1926.1MB/s
jobs6
READ:           21870MB/s	 21715MB/s
READ:           19957MB/s	 19879MB/s
WRITE:          6528.4MB/s	 6537.6MB/s
WRITE:          6098.9MB/s	 6073.6MB/s
READ:           2048.6MB/s	 2049.9MB/s
WRITE:          2041.7MB/s	 2042.9MB/s
READ:           2013.4MB/s	 1990.4MB/s
WRITE:          2009.4MB/s	 1986.5MB/s
jobs7
READ:           21359MB/s	 21124MB/s
READ:           19746MB/s	 19293MB/s
WRITE:          6660.4MB/s	 6518.8MB/s
WRITE:          6211.6MB/s	 6193.1MB/s
READ:           2089.7MB/s	 2080.6MB/s
WRITE:          2085.8MB/s	 2076.5MB/s
READ:           2041.2MB/s	 2052.5MB/s
WRITE:          2037.5MB/s	 2048.8MB/s
jobs8
READ:           20477MB/s	 19974MB/s
READ:           18922MB/s	 18576MB/s
WRITE:          6851.9MB/s	 6788.3MB/s
WRITE:          6407.7MB/s	 6347.5MB/s
READ:           2134.8MB/s	 2136.1MB/s
WRITE:          2132.8MB/s	 2134.4MB/s
READ:           2074.2MB/s	 2069.6MB/s
WRITE:          2087.3MB/s	 2082.4MB/s
jobs9
READ:           19797MB/s	 19994MB/s
READ:           18806MB/s	 18581MB/s
WRITE:          6878.7MB/s	 6822.7MB/s
WRITE:          6456.8MB/s	 6447.2MB/s
READ:           2141.1MB/s	 2154.7MB/s
WRITE:          2144.4MB/s	 2157.3MB/s
READ:           2084.1MB/s	 2085.1MB/s
WRITE:          2091.5MB/s	 2092.5MB/s
jobs10
READ:           19794MB/s	 19784MB/s
READ:           18794MB/s	 18745MB/s
WRITE:          6984.4MB/s	 6676.3MB/s
WRITE:          6532.3MB/s	 6342.7MB/s
READ:           2150.6MB/s	 2155.4MB/s
WRITE:          2156.8MB/s	 2161.5MB/s
READ:           2106.4MB/s	 2095.6MB/s
WRITE:          2109.7MB/s	 2098.4MB/s

                                    BASE                       PATCHED
jobs1                              perfstat
stalled-cycles-frontend     102,480,595,419 (  41.53%)	  114,508,864,804 (  46.92%)
stalled-cycles-backend       51,941,417,832 (  21.05%)	   46,836,112,388 (  19.19%)
instructions                283,612,054,215 (    1.15)	  283,918,134,959 (    1.16)
branches                     56,372,560,385 ( 724.923)	   56,449,814,753 ( 733.766)
branch-misses                   374,826,000 (   0.66%)	      326,935,859 (   0.58%)
jobs2                              perfstat
stalled-cycles-frontend     155,142,745,777 (  40.99%)	  164,170,979,198 (  43.82%)
stalled-cycles-backend       70,813,866,387 (  18.71%)	   66,456,858,165 (  17.74%)
instructions                463,436,648,173 (    1.22)	  464,221,890,191 (    1.24)
branches                     91,088,733,902 ( 760.088)	   91,278,144,546 ( 769.133)
branch-misses                   504,460,363 (   0.55%)	      394,033,842 (   0.43%)
jobs3                              perfstat
stalled-cycles-frontend     201,300,397,212 (  39.84%)	  223,969,902,257 (  44.44%)
stalled-cycles-backend       87,712,593,974 (  17.36%)	   81,618,888,712 (  16.19%)
instructions                642,869,545,023 (    1.27)	  644,677,354,132 (    1.28)
branches                    125,724,560,594 ( 690.682)	  126,133,159,521 ( 694.542)
branch-misses                   527,941,798 (   0.42%)	      444,782,220 (   0.35%)
jobs4                              perfstat
stalled-cycles-frontend     246,701,197,429 (  38.12%)	  280,076,030,886 (  43.29%)
stalled-cycles-backend      119,050,341,112 (  18.40%)	  110,955,641,671 (  17.15%)
instructions                822,716,962,127 (    1.27)	  825,536,969,320 (    1.28)
branches                    160,590,028,545 ( 688.614)	  161,152,996,915 ( 691.068)
branch-misses                   650,295,287 (   0.40%)	      550,229,113 (   0.34%)
jobs5                              perfstat
stalled-cycles-frontend     298,958,462,516 (  38.30%)	  344,852,200,358 (  44.16%)
stalled-cycles-backend      137,558,742,122 (  17.62%)	  129,465,067,102 (  16.58%)
instructions              1,005,714,688,752 (    1.29)	1,007,657,999,432 (    1.29)
branches                    195,988,773,962 ( 697.730)	  196,446,873,984 ( 700.319)
branch-misses                   695,818,940 (   0.36%)	      624,823,263 (   0.32%)
jobs6                              perfstat
stalled-cycles-frontend     334,497,602,856 (  36.71%)	  387,590,419,779 (  42.38%)
stalled-cycles-backend      163,539,365,335 (  17.95%)	  152,640,193,639 (  16.69%)
instructions              1,184,738,177,851 (    1.30)	1,187,396,281,677 (    1.30)
branches                    230,592,915,640 ( 702.902)	  231,253,802,882 ( 702.356)
branch-misses                   747,934,786 (   0.32%)	      643,902,424 (   0.28%)
jobs7                              perfstat
stalled-cycles-frontend     396,724,684,187 (  37.71%)	  460,705,858,952 (  43.84%)
stalled-cycles-backend      188,096,616,496 (  17.88%)	  175,785,787,036 (  16.73%)
instructions              1,364,041,136,608 (    1.30)	1,366,689,075,112 (    1.30)
branches                    265,253,096,936 ( 700.078)	  265,890,524,883 ( 702.839)
branch-misses                   784,991,589 (   0.30%)	      729,196,689 (   0.27%)
jobs8                              perfstat
stalled-cycles-frontend     440,248,299,870 (  36.92%)	  509,554,793,816 (  42.46%)
stalled-cycles-backend      222,575,930,616 (  18.67%)	  213,401,248,432 (  17.78%)
instructions              1,542,262,045,114 (    1.29)	1,545,233,932,257 (    1.29)
branches                    299,775,178,439 ( 697.666)	  300,528,458,505 ( 694.769)
branch-misses                   847,496,084 (   0.28%)	      748,794,308 (   0.25%)
jobs9                              perfstat
stalled-cycles-frontend     506,269,882,480 (  37.86%)	  592,798,032,820 (  44.43%)
stalled-cycles-backend      253,192,498,861 (  18.93%)	  233,727,666,185 (  17.52%)
instructions              1,721,985,080,913 (    1.29)	1,724,666,236,005 (    1.29)
branches                    334,517,360,255 ( 694.134)	  335,199,758,164 ( 697.131)
branch-misses                   873,496,730 (   0.26%)	      815,379,236 (   0.24%)
jobs10                             perfstat
stalled-cycles-frontend     549,063,363,749 (  37.18%)	  651,302,376,662 (  43.61%)
stalled-cycles-backend      281,680,986,810 (  19.07%)	  277,005,235,582 (  18.55%)
instructions              1,901,859,271,180 (    1.29)	1,906,311,064,230 (    1.28)
branches                    369,398,536,153 ( 694.004)	  370,527,696,358 ( 688.409)
branch-misses                   967,929,335 (   0.26%)	      890,125,056 (   0.24%)

                            BASE           PATCHED
seconds elapsed        79.421641008	78.735285546
seconds elapsed        61.471246133	60.869085949
seconds elapsed        62.317058173	62.224188495
seconds elapsed        60.030739363	60.081102518
seconds elapsed        74.070398362	74.317582865
seconds elapsed        84.985953007	85.414364176
seconds elapsed        97.724553255	98.173311344
seconds elapsed        109.488066758	110.268399318
seconds elapsed        122.768189405	122.967164498
seconds elapsed        135.130035105	136.934770801

On my other system (8 x86_64 CPUs, short version of test results):

                            BASE           PATCHED
seconds elapsed        19.518065994	19.806320662
seconds elapsed        15.172772749	15.594718291
seconds elapsed        13.820925970	13.821708564
seconds elapsed        13.293097816	14.585206405
seconds elapsed        16.207284118	16.064431606
seconds elapsed        17.958376158	17.771825767
seconds elapsed        19.478009164	19.602961508
seconds elapsed        21.347152811	21.352318709
seconds elapsed        24.478121126	24.171088735
seconds elapsed        26.865057442	26.767327618

So performance-wise the numbers are quite similar.

Also update zcomp interface to be more aligned with the crypto API.

[1] http://marc.info/?l=linux-kernel&m=144480832108927&w=2
[2] http://marc.info/?l=linux-kernel&m=145379613507518&w=2
[3] https://github.com/sergey-senozhatsky/zram-perf-test

Link: http://lkml.kernel.org/r/20160531122017.2878-3-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: NMinchan Kim <minchan@kernel.org>
Suggested-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>