* pci/enumeration:
  PCI: tegra: Fix pci_remap_iospace() failure path
  PCI: generic: Fix pci_remap_iospace() failure path
  PCI: rcar: Fix pci_remap_iospace() failure path
  PCI: versatile: Fix pci_remap_iospace() failure path
  PCI: designware: Fix pci_remap_iospace() failure path
  PCI: aardvark: Fix pci_remap_iospace() failure path

* pci/aer:
  PCI/AER: Fix aer_probe() kernel-doc comment
  PCI/AER: Cache capability position
  PCI/AER: Avoid memory allocation in interrupt handling path
  ACPI / APEI: Send correct severity to calculate AER severity
  PCI/AER: Remove duplicate AER severity translation
  PCI/AER: Remove aerdriver.forceload kernel parameter
  PCI/AER: Remove aerdriver.nosourceid kernel parameter
  x86/PCI: VMD: Add quirk for AER to ignore source ID
  PCI/AER: Add bus flag to skip source ID matching

Conflicts:
	drivers/pci/probe.c

0516c8bc ("PCI: PCIe portdrv: Simplily probe callback of service
drivers") removed the "id" argument of aer_probe() but neglected to remove
the kernel-doc comment.  Update the comment.

[bhelgaas: changelog]
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Save the position of the error reporting capability so it doesn't need to
be rediscovered during error handling.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Lukas Wunner <lukas@wunner.de>

When handling AER events, we previously allocated a struct aer_err_info,
processed the error, and freed the struct.  But aer_isr_one_error() is
serialized by rpc_mutex, so we never need more than one copy of the struct,
and the struct is only about 70 bytes, so we're not saving much by
allocating it dynamically.

Embed a struct aer_err_info directly in struct aer_rpc, which is allocated
at probe-time by aer_probe().

[bhelgaas: changelog]
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Currently the AER severity is calculated by calling cper_severity_to_aer(),
but the parameter sent is actually the GHES severity.  This causes the AER
severity to be incorrect.

Fix the parameter to be the CPER severity instead of the GHES severity.
Signed-off-by: NTyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>

Currently the AER severity is being translated twice in the code flow for
PCIe errors.  It is first translated in ghes_do_proc() before calling into
the AER driver.  Then it is translated again when the AER driver calls
cper_print_aer().  This causes the severity that is used in
cper_print_aer() to be incorrect.

Remove the second translation that is in cper_print_aer() since this
function is already receiving the correct AER severity.
Signed-off-by: NTyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>

Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must
not use AER unless _OSC is present and _OSC grants AER control to the OS.
The aerdriver.forceload kernel parameter was a way to enable Linux AER
support on ACPI systems that lack _OSC or fail to grant control the the OS.

Enabling Linux AER support when the firmware doesn't want us to is a recipe
for problems, e.g., the firmware might be handling AER itself.

Remove the aerdriver.forceload kernel parameter and related supporting
code.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The aerdriver.nosourceid kernel parameter was intended for working around
broken chipsets don't supply the source ID for AER events.  We recently
added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same
purpose.

Remove the aerdriver.nosourceid kernel parameter.  For anything other than
debugging, asking users to find and use kernel parameters is a poor user
experience.  Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any
hardware that needs it.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

VMD root ports change all source ids to the VMD device ID.  To find the
sender of the AER notification, we need to scan all child devices for the
AER sender, rather than relying on the source ID from the message.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Allow root port buses to choose to skip source id matching when finding the
faulting device.  Certain root port devices may return an incorrect source
ID and recommend to scan child device registers for AER notifications.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI tegra host bridge driver adds the PCI IO resource retrieved from
firmware to the host bridge resource windows even if the
pci_remap_iospace() call fails; this is an actual bug in that the PCI host
bridge would consider the PCI IO resource valid (and possibly assign it to
downstream devices) even if the kernel was not able to map the PCI host
bridge memory address driving IO cycle to the CPU virtual address space (ie
pci_remap_iospace() failures).

Add the PCI host bridge driver pci_remap_iospace() failure path and do not
add the corresponding PCI host bridge PCI IO resources retrieved through
firmware when the pci_remap_iospace() function call fails, fixing the
issue.

Fixes: e6e9f471 ("PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Thierry Reding <treding@nvidia.com>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI common host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).

Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.

Fixes: 4e64dbe2 ("PCI: generic: Expose pci_host_common_probe() for use by other drivers")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NWill Deacon <will.deacon@arm.com>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI rcar host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).

Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.

Fixes: 5d2917d4 ("PCI: rcar: Convert to DT resource parsing API")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Phil Edworthy <phil.edworthy@renesas.com>
CC: Simon Horman <horms+renesas@verge.net.au>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI versatile host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).

Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.

Fixes: b7e78170 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Rob Herring <robh@kernel.org>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI designware host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).

Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.

Fixes: cbce7900 ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridge's memory address space driving PCI IO
cycles to it.

PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.

This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.

The PCI aardvark host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).

Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.

Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

* pci/ptm:
  PCI: Add PTM clock granularity information
  PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints
  PCI: Add Precision Time Measurement (PTM) support

* pci/demodularize:
  PCI: pciehp: Make explicitly non-modular
  PCI: hotplug: Make core explicitly non-modular
  PCI: xilinx-nwl: Make explicitly non-modular
  PCI: xilinx: Make explicitly non-modular
  PCI: qcom: Make explicitly non-modular
  PCI: dra7xx: Make explicitly non-modular
  PCI/AER: Make explicitly non-modular
  PCI/PME: Make explicitly non-modular
  PCI: Make DPC explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: exynos: Make explicitly non-modular
  PCI: designware: Make explicitly non-modular
  PCI: spear: Make explicitly non-modular
  PCI: portdrv: Make explicitly non-modular
  PCI: imx6: Make explicitly non-modular
  PCI: altera: Make explicitly non-modular
  PCI: altera: Make MSI explicitly non-modular

The PTM Control register (PCIe r3.1, sec 7.32.3) contains an Effective
Granularity field:

  This provides information relating to the expected accuracy of the PTM
  clock, but does not otherwise affect the PTM mechanism.

Set the Effective Granularity based on the PTM Root and any intervening PTM
Time Sources.

This does not set Effective Granularity for Root Complex Integrated
Endpoints because I don't know how to figure out clock granularity for
them.  The spec says:

  ... system software must set [Effective Granularity] to the value
  reported in the Local Clock Granularity field by the associated PTM
  Time Source.

but I don't know how to identify the associated PTM Time Source.  Normally
it's the upstream bridge, but an integrated endpoint has no upstream
bridge.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This code is not being built as a module by anyone:

  obj-$(CONFIG_HOTPLUG_PCI_PCIE)          += pciehp.o
  pciehp-objs                             := pciehp_core.o   \

  drivers/pci/pcie/Kconfig:config HOTPLUG_PCI_PCIE
  drivers/pci/pcie/Kconfig:  bool "PCI Express Hotplug driver"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, module_init() translates to
device_initcall().  One could argue that we should use subsys_initcall()
here, but for now we stick with runtime equivalence.

We delete module.h but we keep the moduleparam.h include, since we are
keeping the module_param() that the file has as-is for now.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Kristen Carlson Accardi <kristen@linux.intel.com>

This code is not being built as a module by anyone:

  obj-$(CONFIG_HOTPLUG_PCI)           += pci_hotplug.o
  [...]
  pci_hotplug-objs                    := pci_hotplug_core.o

  drivers/pci/hotplug/Kconfig:menuconfig HOTPLUG_PCI
  drivers/pci/hotplug/Kconfig:  bool "Support for PCI Hotplug"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Remove orphaned exit function in cpci_hotplug_core.c.

Note that for non-modular code, module_init() translates to
device_initcall().  One could argue that we should use subsys_initcall()
here, but for now we stick with runtime equivalence.

We would delete module.h and just keep the moduleparam.h include (since the
file does use module_param), but there is a try_module_get and module_put
pairing that prevents us from doing that.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Scott Murray <scott@spiteful.org>
CC: Kristen Carlson Accardi <kristen@linux.intel.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_XILINX_NWL
  drivers/pci/host/Kconfig:  bool "NWL PCIe Core"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.  Delete several functions only used by the remove function.

Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
CC: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_XILINX
  drivers/pci/host/Kconfig:  bool "Xilinx AXI PCIe host bridge support"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_QCOM
  drivers/pci/host/Kconfig:  bool "Qualcomm PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver() uses the same init level priority as
module_platform_driver(), so this doesn't change init ordering.

Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCI_DRA7XX
  drivers/pci/host/Kconfig:  bool "TI DRA7xx PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver_probe() uses the same init level priority as
module_platform_driver_probe(), so this doesn't change init ordering.

Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>

This code is not being built as a module by anyone:

  obj-$(CONFIG_PCIEAER) += aerdriver.o
  aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o

  drivers/pci/pcie/aer/Kconfig:config PCIEAER
  drivers/pci/pcie/aer/Kconfig:  bool "Root Port Advanced Error Reporting support"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, module_init() translates to
device_initcall().

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Tom Long Nguyen <tom.l.nguyen@intel.com>

This code is not being built as a module by anyone:

  config PCIE_PME
        def_bool y
        depends on PCIEPORTBUS && PM

Remove traces of modularity so that when reading the driver there is no
doubt it is builtin-only.

Also delete the .remove function, since that doesn't seem to have a
sensible use case.  With "normal" endpoint drivers, we have in the past set
the suppress_bind_attrs bit to make it clear that the use of ".remove" in a
builtin driver was deleted, but here for PCI, it seems overkill to jump
through the pcie_port_service_driver and into the struct device_driver in
order to finally try and do something similar with the bind setting.

Note that for non-modular code, module_init() translates to
device_initcall().
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This code is not being built as a module by anyone:

  drivers/pci/pcie/Kconfig:config PCIE_DPC
  drivers/pci/pcie/Kconfig:  bool "PCIe Downstream Port Containment support"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, module_init() translates to
device_initcall().

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCI_HOST_COMMON
  drivers/pci/host/Kconfig:  bool

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Will Deacon <will.deacon@arm.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCI_EXYNOS
  drivers/pci/host/Kconfig:  bool "Samsung Exynos PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Kukjin Kim <kgene@kernel.org>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_DW
  drivers/pci/host/Kconfig:  bool

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_SPEAR13XX
  drivers/pci/host/Kconfig:  bool "STMicroelectronics SPEAr PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

This code is not being built as a module by anyone:

  pcieportdrv-y               := portdrv_core.o portdrv_pci.o portdrv_bus.o
  obj-$(CONFIG_PCIEPORTBUS)   += pcieportdrv.o

  drivers/pci/pcie/Kconfig:config PCIEPORTBUS
  drivers/pci/pcie/Kconfig:  bool "PCI Express Port Bus support"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().

[bhelgaas: changelog, remove unused DRIVER_* macros]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Tom Long Nguyen <tom.l.nguyen@intel.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCI_IMX6
  drivers/pci/host/Kconfig:  bool "Freescale i.MX6 PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Lucas Stach <l.stach@pengutronix.de>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_ALTERA
  drivers/pci/host/Kconfig:  bool "Altera PCIe controller"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Ley Foon Tan <lftan@altera.com>

This code is not being built as a module by anyone:

  drivers/pci/host/Kconfig:config PCIE_ALTERA_MSI
  drivers/pci/host/Kconfig:  bool "Altera PCIe MSI feature"

Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.

[bhelgaas: changelog]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Ley Foon Tan <lftan@altera.com>

Add an pci_enable_ptm() interface so drivers can enable PTM.

The PCI core enables PTM on PTM Roots and switches automatically, but we
don't enable PTM on endpoints unless a driver requests it.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22).

Enable PTM on PTM Root devices and switch ports.  This does not enable PTM
on endpoints.

There currently are no PTM-capable devices on the market, but it is
expected to be supported by the Intel Apollo Lake platform.

[bhelgaas: complete rework]
Signed-off-by: NJonathan Yong <jonathan.yong@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>