Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 3月, 2015 5 次提交
  3. 26 2月, 2015 1 次提交
  5. 17 2月, 2015 1 次提交
  7. 23 1月, 2015 10 次提交
  9. 22 1月, 2015 17 次提交
  11. 20 1月, 2015 4 次提交
    • R
      mfd: rtsx_usb: Fix runtime PM deadlock · b166010f
      由 Roger Tseng 提交于 
      sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c
acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the
device is awake while initializing a newly inserted card. Once it is
called during suspending state and explicitly before rtsx_usb_suspend()
acquires the same dev_mutex, both routine deadlock and further hang the
driver because pm_runtime_get_sync() waits the pending PM operations.

Fix this by using an empty suspend method. mmc_core always turns the
LED off after a request is done and thus it is ok to remove the only
rtsx_usb_turn_off_led() here.

Cc: <stable@vger.kernel.org> # v3.16+
Fixes: 730876be ("mfd: Add realtek USB card reader driver")
Signed-off-by: NRoger Tseng <rogerable@realtek.com>
[Lee: Removed newly unused variable]
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      b166010f
    • F
      mfd: tps65218: Make INT1 our status_base register · f29ae369
      由 Felipe Balbi 提交于 
      If we don't tell regmap-irq that our first status
register is at offset 1, it will try to read offset
zero, which is the chipid register.

Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      f29ae369
    • F
      mfd: tps65218: Make INT[12] and STATUS registers volatile · 773328da
      由 Felipe Balbi 提交于 
      STATUS register can be modified by the HW, so we
should bypass cache because of that.

In the case of INT[12] registers, they are the ones
that actually clear the IRQ source at the time they
are read. If we rely on the cache for them, we will
never be able to clear the interrupt, which will cause
our IRQ line to be disabled due to IRQ throttling.

Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      773328da
    • F
      mfd: da9052-core: Fix platform-device id collision · b3f6c73d
      由 Fabio Estevam 提交于 
      Allow multiple DA9052 regulators be registered by registering with
PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.

The subdevices are currently registered with PLATFORM_DEVID_NONE, which
will cause a name collision on the platform bus when multiple regulators
are registered:

[    0.128855] da9052-regulator da9052-regulator: invalid regulator ID specified
[    0.128973] da9052-regulator: probe of da9052-regulator failed with error -22
[    0.129148] ------------[ cut here ]------------
[    0.129200] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x7c()
[    0.129233] sysfs: cannot create duplicate filename '/devices/platform/soc/60000000.aips/63fc8000.i2c/i2c-0/0-0048/da9052-regulator
...
[    0.132891] ------------[ cut here ]------------
[    0.132924] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x24c/0x2cc()
[    0.132957] kobject_add_internal failed for da9052-regulator with -EEXIST, don't try to register things with the same name in the same directory.
...
[    0.137000] da9052 0-0048: mfd_add_devices failed: -17
[    0.138486] da9052: probe of 0-0048 failed with error -17

Based on the fix done by Johan Hovold at commit b6684228 ("mfd:
viperboard: Fix platform-device id collision").

Tested on a imx53-qsb board, where multiple DA9053 regulators can be
successfully probed.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      b3f6c73d
  13. 16 12月, 2014 1 次提交
  15. 05 12月, 2014 1 次提交