The mm_exit() op will be removed from the SVA API. When a process dies
and its mm goes away, the IOMMU driver won't notify device drivers
anymore. Drivers should expect to handle a lot more aborted DMA. On the
upside, it does greatly simplify the queue management.

The uacce_mm struct, that tracks all queues bound to an mm, was only
used by the mm_exit() callback. Remove it.
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Acked-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20200423125329.782066-2-jean-philippe@linaro.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The pci_ats_supported() helper checks if a device supports ATS and is
allowed to use it. By checking the ATS capability it also integrates the
pci_ats_disabled() check from pci_ats_init(). Simplify the vt-d checks.
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200520152201.3309416-5-jean-philippe@linaro.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The new pci_ats_supported() function checks if a device supports ATS and
is allowed to use it.
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200520152201.3309416-4-jean-philippe@linaro.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The pci_ats_supported() function checks if a device supports ATS and is
allowed to use it. In addition to checking that the device has an ATS
capability and that the global pci=noats is not set
(pci_ats_disabled()), it also checks if a device is untrusted.

A device is untrusted if it is plugged into an external-facing port such
as Thunderbolt and could be spoofing an existing device to exploit
weaknesses in the IOMMU configuration. By calling pci_ats_supported() we
keep DTE[I]=0 for untrusted devices and abort transactions with
Pretranslated Addresses.
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200520152201.3309416-3-jean-philippe@linaro.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Add pci_ats_supported(), which checks whether a device has an ATS
capability, and whether it is trusted.  A device is untrusted if it is
plugged into an external-facing port such as Thunderbolt and could be
spoofing an existing device to exploit weaknesses in the IOMMU
configuration.  PCIe ATS is one such weaknesses since it allows
endpoints to cache IOMMU translations and emit transactions with
'Translated' Address Type (10b) that partially bypass the IOMMU
translation.

The SMMUv3 and VT-d IOMMU drivers already disallow ATS and transactions
with 'Translated' Address Type for untrusted devices.  Add the check to
pci_enable_ats() to let other drivers (AMD IOMMU for now) benefit from
it.

By checking ats_cap, the pci_ats_supported() helper also returns whether
ATS was globally disabled with pci=noats, and could later include more
things, for example whether the whole PCIe hierarchy down to the
endpoint supports ATS.
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: NJoerg Roedel <jroedel@suse.de>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200520152201.3309416-2-jean-philippe@linaro.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The iommu_alloc_default_domain() function takes a reference to an IOMMU
group without releasing it. This causes the group to never be released,
with undefined side effects.

The function has only one call-site, which takes a group reference on
its own, so to fix this leak, do not take another reference in
iommu_alloc_default_domain() and pass the group as a function parameter
instead.

Fixes: 6e1aa204 ("iommu: Move default domain allocation to iommu_probe_device()")
Reported-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200525130122.380-1-joro@8bytes.org
Reference: https://lore.kernel.org/lkml/20200522130145.30067-1-saiprakash.ranjan@codeaurora.org/

The .probe_finalize() call-back of some IOMMU drivers calls into
arm_iommu_attach_device(). This function will call back into the
IOMMU core code, where it tries to take group->mutex again, resulting
in a deadlock.

As there is no reason why .probe_finalize() needs to be called under
that mutex, move it after the lock has been released to fix the
deadlock.

Fixes: deac0b3b ("iommu: Split off default domain allocation from group assignment")
Reported-by: NYong Wu <yong.wu@mediatek.com>
Tested-by: NYong Wu <yong.wu@mediatek.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200519132824.15163-1-joro@8bytes.org

This patch fixes a build warning:
drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_release_device':
>> drivers/iommu/mtk_iommu_v1.c:467:25: warning: variable 'data' set but
>> not used [-Wunused-but-set-variable]
467 |  struct mtk_iommu_data *data;
|                         ^~~~

It's reported at:
https://lore.kernel.org/linux-iommu/202005191458.gY38V8bU%25lkp@intel.com/T/#uReported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NYong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/1589875064-662-1-git-send-email-yong.wu@mediatek.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The MediaTek V1 IOMMU is arm32 whose default domain type is
IOMMU_DOMAIN_UNMANAGED. Add this to satisfy the bus_iommu_probe to
enter "probe_finalize".

The iommu framework will create a iommu domain for each a device.
But all the devices share a iommu domain here, thus we skip all the
other domains in the "attach_device" except the domain we create
internally with arm_iommu_create_mapping.

Also a minor change: in the attach_device, "data" always is not null.
Remove "if (!data) return".
Signed-off-by: NYong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/1589530123-30240-1-git-send-email-yong.wu@mediatek.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The fwnode pointer must be passed to the iommu core, so that the core
can map the IOMMU towards device requests properly. Without this, some
IOMMU clients like OMAP remoteproc will fail the iommu configuration
multiple times with -EPROBE_DEFER, which will eventually be ignored with
a kernel warning banner.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200424145828.3159-1-t-kristo@ti.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Most of the devices in OMAP family of SoCs are not using IOMMU. The
patch for converting the OMAP IOMMU to use generic IOMMU bus probe
functionality failed to add a check for this, so add it here.

Fixes: c822b37c ("iommu/omap: Remove orphan_dev tracking")
Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200518111057.23140-1-t-kristo@ti.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Linux 5.7-rc4

Unify format of the printed messages, i.e. replace printk(LEVEL ... )
with pr_level(...).
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200507161804.13275-2-andriy.shevchenko@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

gcc warns because the only reference to ipmmu_find_group
is inside of an #ifdef:

drivers/iommu/ipmmu-vmsa.c:878:28: error: 'ipmmu_find_group' defined but not used [-Werror=unused-function]

Change the #ifdef to an equivalent IS_ENABLED().

Fixes: 6580c8a7 ("iommu/renesas: Convert to probe/release_device() call-backs")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/20200508220224.688985-1-arnd@arndb.deSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The host1x bus implemented on Tegra SoCs is primarily an abstraction to
create logical device from multiple platform devices. Since the devices
in such a setup are typically hierarchical, DMA setup still needs to be
done so that DMA masks can be properly inherited, but we don't actually
want to attach the host1x logical devices to any IOMMU. The platform
devices that make up the logical device are responsible for memory bus
transactions, so it is them that will need to be attached to the IOMMU.

Add a check to __iommu_probe_device() that aborts IOMMU setup early for
busses that don't have the IOMMU operations pointer set since they will
cause a crash otherwise.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200511161000.3853342-1-thierry.reding@gmail.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The commit dce8d696 ("iommu/amd: Convert to probe/release_device()
call-backs") introduced an unused variable,

drivers/iommu/amd_iommu.c: In function 'amd_iommu_uninit_device':
drivers/iommu/amd_iommu.c:422:20: warning: variable 'iommu' set but not
used [-Wunused-but-set-variable]
  struct amd_iommu *iommu;
                    ^~~~~
Signed-off-by: NQian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200509015645.3236-1-cai@lca.pw
Fixes: dce8d696 ("iommu/amd: Convert to probe/release_device() call-backs")
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The function is now only used in IOMMU core code and shouldn't be used
outside of it anyway, so remove the export for it.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Move the calls to dev_iommu_get() and try_module_get() into
__iommu_probe_device(), so that the callers don't have to do it on
their own.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-34-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

All drivers are converted to use the probe/release_device()
call-backs, so the add_device/remove_device() pointers are unused and
the code using them can be removed.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Exynos IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-32-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

On Exynos platforms there can be more than one SYSMMU (IOMMU) for one
DMA master device. Since the IOMMU core code expects only one hardware
IOMMU, use the first SYSMMU in the list.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the OMAP IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Remove the tracking of device which could not be probed because
their IOMMU is not probed yet. Replace it with a call to
bus_iommu_probe() when a new IOMMU is probed.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Renesas IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Tegra IOMMU drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-27-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Rockchip IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the QCOM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-25-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Mediatek-v1 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Mediatek IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-23-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the MSM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-22-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the VirtIO IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-21-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the S390 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-20-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the PAMU IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-19-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code does the
group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the Intel IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Convert the AMD IOMMU Driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-16-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Make use of generic IOMMU infrastructure to gather the same information
carried in dev_data->passthrough and remove the struct member.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-15-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Add a check to the bus_iommu_probe() call-path to make sure it ignores
devices which have already been successfully probed. Then export the
bus_iommu_probe() function so it can be used by IOMMU drivers.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

After the previous changes the iommu group may not have a default
domain when iommu_group_add_device() is called. With no default domain
iommu_group_create_direct_mappings() will do nothing and no direct
mappings will be created.

Rename iommu_group_create_direct_mappings() to
iommu_create_device_direct_mappings() to better reflect that the
function creates direct mappings only for one device and not for all
devices in the group. Then move the call to the places where a default
domain actually exists.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-13-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>

When a bus is initialized with iommu-ops, all devices on the bus are
scanned and iommu-groups are allocated for them, and each groups will
also get a default domain allocated.

Until now this happened as soon as the group was created and the first
device added to it. When other devices with different default domain
requirements were added to the group later on, the default domain was
re-allocated, if possible.

This resulted in some back and forth and unnecessary allocations, so
change the flow to defer default domain allocation until all devices
have been added to their respective IOMMU groups.

The default domains are allocated for newly allocated groups after
each device on the bus is handled and was probed by the IOMMU driver.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-12-joro@8bytes.orgSigned-off-by: NJoerg Roedel <jroedel@suse.de>