Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 13 1月, 2006 1 次提交
  3. 12 1月, 2006 2 次提交
  5. 11 1月, 2006 3 次提交
  7. 09 1月, 2006 3 次提交
    • A
      [PATCH] fs/proc/: function prototypes belong in header files · fee781e6
      由 Adrian Bunk 提交于 
      Function prototypes belong into header files.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      fee781e6
    • M
      [PATCH] slob: introduce the SLOB allocator · 10cef602
      由 Matt Mackall 提交于 
      configurable replacement for slab allocator

This adds a CONFIG_SLAB option under CONFIG_EMBEDDED.  When CONFIG_SLAB is
disabled, the kernel falls back to using the 'SLOB' allocator.

SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer,
similar to the original Linux kmalloc allocator that SLAB replaced.  It's
signicantly smaller code and is more memory efficient.  But like all
similar allocators, it scales poorly and suffers from fragmentation more
than SLAB, so it's only appropriate for small systems.

It's been tested extensively in the Linux-tiny tree.  I've also
stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not
recommended).

Here's a comparison for otherwise identical builds, showing SLOB saving
nearly half a megabyte of RAM:

$ size vmlinux*
   text    data     bss     dec     hex filename
3336372  529360  190812 4056544  3de5e0 vmlinux-slab
3323208  527948  190684 4041840  3dac70 vmlinux-slob

$ size mm/{slab,slob}.o
   text    data     bss     dec     hex filename
  13221     752      48   14021    36c5 mm/slab.o
   1896      52       8    1956     7a4 mm/slob.o

/proc/meminfo:
                  SLAB          SLOB      delta
MemTotal:        27964 kB      27980 kB     +16 kB
MemFree:         24596 kB      25092 kB    +496 kB
Buffers:            36 kB         36 kB       0 kB
Cached:           1188 kB       1188 kB       0 kB
SwapCached:          0 kB          0 kB       0 kB
Active:            608 kB        600 kB      -8 kB
Inactive:          808 kB        812 kB      +4 kB
HighTotal:           0 kB          0 kB       0 kB
HighFree:            0 kB          0 kB       0 kB
LowTotal:        27964 kB      27980 kB     +16 kB
LowFree:         24596 kB      25092 kB    +496 kB
SwapTotal:           0 kB          0 kB       0 kB
SwapFree:            0 kB          0 kB       0 kB
Dirty:               4 kB         12 kB      +8 kB
Writeback:           0 kB          0 kB       0 kB
Mapped:            560 kB        556 kB      -4 kB
Slab:             1756 kB          0 kB   -1756 kB
CommitLimit:     13980 kB      13988 kB      +8 kB
Committed_AS:     4208 kB       4208 kB       0 kB
PageTables:         28 kB         28 kB       0 kB
VmallocTotal:  1007312 kB    1007312 kB       0 kB
VmallocUsed:        48 kB         48 kB       0 kB
VmallocChunk:  1007264 kB    1007264 kB       0 kB

(this work has been sponsored in part by CELF)

From: Ingo Molnar <mingo@elte.hu>

   Fix 32-bitness bugs in mm/slob.c.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      10cef602
    • C
      [PATCH] Fold numa_maps into mempolicies.c · 1a75a6c8
      由 Christoph Lameter 提交于 
      First discussed at http://marc.theaimsgroup.com/?t=113149255100001&r=1&w=2

- Use the check_range() in mempolicy.c to gather statistics.

- Improve the numa_maps code in general and fix some comments.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      1a75a6c8
  9. 07 1月, 2006 1 次提交
  11. 31 12月, 2005 1 次提交
    • L
      Insanity avoidance in /proc · 8b90db0d
      由 Linus Torvalds 提交于 
      The old /proc interfaces were never updated to use loff_t, and are just
generally broken.  Now, we should be using the seq_file interface for
all of the proc files, but converting the legacy functions is more work
than most people care for and has little upside..

But at least we can make the non-LFS rules explicit, rather than just
insanely wrapping the offset or something.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      8b90db0d
  13. 29 11月, 2005 1 次提交
    • L
      mm: re-architect the VM_UNPAGED logic · 6aab341e
      由 Linus Torvalds 提交于 
      This replaces the (in my opinion horrible) VM_UNMAPPED logic with very
explicit support for a "remapped page range" aka VM_PFNMAP.  It allows a
VM area to contain an arbitrary range of page table entries that the VM
never touches, and never considers to be normal pages.

Any user of "remap_pfn_range()" automatically gets this new
functionality, and doesn't even have to mark the pages reserved or
indeed mark them any other way.  It just works.  As a side effect, doing
mmap() on /dev/mem works for arbitrary ranges.

Sparc update from David in the next commit.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6aab341e
  15. 14 11月, 2005 1 次提交
  17. 08 11月, 2005 2 次提交
  19. 31 10月, 2005 2 次提交
  21. 30 10月, 2005 5 次提交
    • H
      [PATCH] mm: follow_page with inner ptlock · deceb6cd
      由 Hugh Dickins 提交于 
      Final step in pushing down common core's page_table_lock.  follow_page no
longer wants caller to hold page_table_lock, uses pte_offset_map_lock itself;
and so no page_table_lock is taken in get_user_pages itself.

But get_user_pages (and get_futex_key) do then need follow_page to pin the
page for them: take Daniel's suggestion of bitflags to follow_page.

Need one for WRITE, another for TOUCH (it was the accessed flag before:
vanished along with check_user_page_readable, but surely get_numa_maps is
wrong to mark every page it finds as accessed), another for GET.

And another, ANON to dispose of untouched_anonymous_page: it seems silly for
that to descend a second time, let follow_page observe if there was no page
table and return ZERO_PAGE if so.  Fix minor bug in that: check VM_LOCKED -
make_pages_present ought to make readonly anonymous present.

Give get_numa_maps a cond_resched while we're there.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      deceb6cd
    • H
      [PATCH] mm: pte_offset_map_lock loops · 705e87c0
      由 Hugh Dickins 提交于 
      Convert those common loops using page_table_lock on the outside and
pte_offset_map within to use just pte_offset_map_lock within instead.

These all hold mmap_sem (some exclusively, some not), so at no level can a
page table be whipped away from beneath them.  But whereas pte_alloc loops
tested with the "atomic" pmd_present, these loops are testing with pmd_none,
which on i386 PAE tests both lower and upper halves.

That's now unsafe, so add a cast into pmd_none to test only the vital lower
half: we lose a little sensitivity to a corrupt middle directory, but not
enough to worry about.  It appears that i386 and UML were the only
architectures vulnerable in this way, and pgd and pud no problem.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      705e87c0
    • H
      [PATCH] mm: update_hiwaters just in time · 365e9c87
      由 Hugh Dickins 提交于 
      update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability.  Originally it was called whenever rss or
total_vm got raised.  Then many of those callsites were replaced by a timer
tick call from account_system_time.  Now Frank van Maarseveen reports that to
be found inadequate.  How about this?  Works for Frank.

Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm.  Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths.  Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit.  Handle
mm->hiwater_vm in the same way, though it's much less of an issue.  Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.

And there has been no collector of these hiwater statistics in the tree.  The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).

There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high.  A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.

What locking?  None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact.  But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      365e9c87
    • H
      [PATCH] mm: rss = file_rss + anon_rss · 4294621f
      由 Hugh Dickins 提交于 
      I was lazy when we added anon_rss, and chose to change as few places as
possible.  So currently each anonymous page has to be counted twice, in rss
and in anon_rss.  Which won't be so good if those are atomic counts in some
configurations.

Change that around: keep file_rss and anon_rss separately, and add them
together (with get_mm_rss macro) when the total is needed - reading two
atomics is much cheaper than updating two atomics.  And update anon_rss
upfront, typically in memory.c, not tucked away in page_add_anon_rmap.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      4294621f
    • A
      [PATCH] Convert mempolicies to nodemask_t · dfcd3c0d
      由 Andi Kleen 提交于 
      The NUMA policy code predated nodemask_t so it used open coded bitmaps.
Convert everything to nodemask_t.  Big patch, but shouldn't have any actual
behaviour changes (except I removed one unnecessary check against
node_online_map and one unnecessary BUG_ON)
Signed-off-by: N"Andi Kleen" <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      dfcd3c0d
  23. 18 10月, 2005 1 次提交
  25. 15 10月, 2005 1 次提交
  27. 26 9月, 2005 1 次提交
    • P
      powerpc: Merge enough to start building in arch/powerpc. · 14cf11af
      由 Paul Mackerras 提交于 
      This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      14cf11af
  29. 23 9月, 2005 1 次提交
  31. 22 9月, 2005 1 次提交
  33. 18 9月, 2005 1 次提交
  35. 10 9月, 2005 3 次提交
  37. 08 9月, 2005 4 次提交
  39. 05 9月, 2005 2 次提交
    • M
      [PATCH] add /proc/pid/smaps · e070ad49
      由 Mauricio Lin 提交于 
      Add a "smaps" entry to /proc/pid: show howmuch memory is resident in each
mapping.

People that want to perform a memory consumption analysing can use it
mainly if someone needs to figure out which libraries can be reduced for
embedded systems.  So the new features are the physical size of shared and
clean [or dirty]; private and clean [or dirty].

Take a look the example below:

# cat /proc/4576/smaps

08048000-080dc000 r-xp /bin/bash
Size:               592 KB
Rss:                500 KB
Shared_Clean:       500 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:        0 KB
080dc000-080e2000 rw-p /bin/bash
Size:                24 KB
Rss:                 24 KB
Shared_Clean:         0 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:       24 KB
080e2000-08116000 rw-p
Size:               208 KB
Rss:                208 KB
Shared_Clean:         0 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:      208 KB
b7e2b000-b7e34000 r-xp /lib/tls/libnss_files-2.3.2.so
Size:                36 KB
Rss:                 12 KB
Shared_Clean:        12 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:        0 KB
...

(Includes a cleanup from "Richard Purdie" <rpurdie@rpsys.net>)

From: Torsten Foertsch <torsten.foertsch@gmx.net>

show_smap calls first show_map and then prints its additional information to
the seq_file.  show_map checks if all it has to print fits into the buffer and
if yes marks the current vma as written.  While that is correct for show_map
it is not for show_smap.  Here the vma should be marked as written only after
the additional information is also written.

The attached patch cures the problem.  It moves the functionality of the
show_map function to a new function show_map_internal that is called with an
additional struct mem_size_stats* argument.  Then show_map calls
show_map_internal with NULL as struct mem_size_stats* whereas show_smap calls
it with a real pointer.  Now the final

	if (m->count < m->size)  /* vma is copied successfully */
		m->version = (vma != get_gate_vma(task))? vma->vm_start: 0;

is done only if the whole entry fits into the buffer.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e070ad49
    • C
      [PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside · 6e21c8f1
      由 Christoph Lameter 提交于 
      This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2

I inherited a large code base from Ray for page migration.  There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process.  I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process.  numa_maps is indexes by the start address
found in /proc/<pid>/maps.  F.e.  with this patch you can see the page use
of the "getty" process:

margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516                /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516                /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923            /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467           /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399           /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399           /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0          [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0          [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0                  [vdso]

cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1

getty uses ld.so.  The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.

The second vma is the process specific data portion for ld.so.  This is
only one page.

The display format is:

<startaddress>	 Links to information in /proc/<pid>/map
<memory policy>  This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef=		<maximum reference to a page in this vma>
Pages=		<Nr of pages in use>
Mapped=		<Nr of pages with mapcount >
Anon=		<nr of anonymous pages>
Nx=		<Nr of pages on Node x>

The content of the proc-file is self-evident.  If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6e21c8f1
  41. 20 8月, 2005 1 次提交
  43. 26 6月, 2005 2 次提交