When drivers express support for TSO of encapsulated packets, they
only mean that they can do it for one layer of encapsulation.
Supporting additional levels would mean updating, at a minimum,
more IP length fields and they are unaware of this.

No encapsulation device expresses support for handling offloaded
encapsulated packets, so we won't generate these types of frames
in the transmit path. However, GRO doesn't have a check for
multiple levels of encapsulation and will attempt to build them.

UDP tunnel GRO actually does prevent this situation but it only
handles multiple UDP tunnels stacked on top of each other. This
generalizes that solution to prevent any kind of tunnel stacking
that would cause problems.

Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: NJesse Gross <jesse@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipip encapsulated packets can be merged together by GRO but the result
does not have the proper GSO type set or even marked as being
encapsulated at all. Later retransmission of these packets will likely
fail if the device does not support ipip offloads. This is similar to
the issue resolved in IPv6 sit in feec0cb3
("ipv6: gro: support sit protocol").
Reported-by: NPatrick Boutilier <boutilpj@ednet.ns.ca>
Fixes: 9667e9bb ("ipip: Add gro callbacks to ipip offload")
Tested-by: NPatrick Boutilier <boutilpj@ednet.ns.ca>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NJesse Gross <jesse@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the user supply a different fragmentation point or if there is a
network header that cause it to not be aligned, force it to be aligned.

Fragmentation point at a value that is not aligned is not optimal.  It
causes extra padding to be used and has just no pros.

v2:
 - Make use of the new WORD_TRUNC macro
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SCTP is a protocol that is aligned to a word (4 bytes). Thus using bare
MTU can sometimes return values that are not aligned, like for loopback,
which is 65536 but ipv4_mtu() limits that to 65535. This mis-alignment
will cause the last non-aligned bytes to never be used and can cause
issues with congestion control.

So it's better to just consider a lower MTU and keep congestion control
calcs saner as they are based on PMTU.

Same applies to icmp frag needed messages, which is also fixed by this
patch.

One other effect of this is the inability to send MTU-sized packet
without queueing or fragmentation and without hitting Nagle. As the
check performed at sctp_packet_can_append_data():

if (chunk->skb->len + q->out_qlen >= transport->pathmtu - packet->overhead)
	/* Enough data queued to fill a packet */
	return SCTP_XMIT_OK;

with the above example of MTU, if there are no other messages queued,
one cannot send a packet that just fits one packet (65532 bytes) and
without causing DATA chunk fragmentation or a delay.

v2:
 - Added WORD_TRUNC macro
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if a chunk is scheduled to be sent through a transport that
is currently unconfirmed, it will be leaked as it is dequeued from outq
and is not re-queued nor freed.

As I'm not aware of any situation that may lead to this situation, I'm
fixing this by freeing the chunk and also logging a trace so that we can
fix the other bug if it ever happens.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SACK can be lost pretty much elsewhere, but if its allocation fail,
we know we are not sending it, so it is better to revert a_rwnd to its
previous value as this may give it a chance to issue a window update
later.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP protocol is still used these days, and TCP uses
clones in its transmit path. We can not optimize linux
stack assuming it is mostly used in routers, or that TCP
is dead.

Fixes: 795bb1c0 ("net: bulk free infrastructure for NAPI context, use napi_consume_skb")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

zero_gid is not used, so remove this redundant array.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
flowi6_tos fixes

This set is a follow-up to address Jiri's recent feedback [1] on
the flowi6_tos issue, that it is not used for IPv6 route lookups.
The three patches fix all current users of flowi6_tos and remove
the define to avoid any future confusion on this. Tested the vxlan
and geneve ones with IPv6 routing rules. For details, please see
individual patches.

[ As fixes are currently applied against net-next tree, I've rebased
  it against that. ]

Thanks!

  [1] http://patchwork.ozlabs.org/patch/592055/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

flowi6_tos of struct flowi6 is unused in IPv6, therefore dumping tos on
that tracepoint will also give incorrect information wrt traffic class.

If we want to fix it, we need to extract it via ip6_tclass(flp->flowlabel).
While for the same test case I get a count of 0 non-zero tos values before
the change, they now start to show up after the change:

  # ./perf record -e fib6:fib6_table_lookup -a sleep 10
  # ./perf script | grep -v "tos 0" | wc -l
  60

Since there's no user in the kernel tree anymore of flowi6_tos, remove the
define to avoid any future confusion on this.

Fixes: b811580d ("net: IPv6 fib lookup tracepoint")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The struct flowi6's flowi6_tos is not used in IPv6 route lookup, the
traffic class information is handled in the flowi6's flowlabel member
instead. For example, for policy routing, fib6_rule_match() uses
ip6_tclass() that is applied on the flowlabel for matching on tclass,
which would currently not work as expected.

Fixes: 3a56f86f ("geneve: handle ipv6 priority like ipv4 tos")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri mentioned that flowi6_tos of struct flowi6 is never used/read
anywhere. In fact, rest of the kernel uses the flowi6's flowlabel,
where the traffic class _and_ the flowlabel (aka flowinfo) is encoded.

For example, for policy routing, fib6_rule_match() uses ip6_tclass()
that is applied on the flowlabel member for matching on tclass. Similar
fix is needed for geneve, where flowi6_tos is set as well. Installing
a v6 blackhole rule that f.e. matches on tos is now working with vxlan.

Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class")
Reported-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM updates from Russell King:
 "Another mixture of changes this time around:

   - Split XIP linker file from main linker file to make it more
     maintainable, and various XIP fixes, and clean up a resulting
     macro.

   - Decompressor cleanups from Masahiro Yamada

   - Avoid printing an error for a missing L2 cache

   - Remove some duplicated symbols in System.map, and move
     vectors/stubs back into kernel VMA

   - Various low priority fixes from Arnd

   - Updates to allow bus match functions to return negative errno
     values, touching some drivers and the driver core.  Greg has acked
     these changes.

   - Virtualisation platform udpates form Jean-Philippe Brucker.

   - Security enhancements from Kees Cook

   - Rework some Kconfig dependencies and move PSCI idle management code
     out of arch/arm into drivers/firmware/psci.c

   - ARM DMA mapping updates, touching media, acked by Mauro.

   - Fix places in ARM code which should be using virt_to_idmap() so
     that Keystone2 can work.

   - Fix Marvell Tauros2 to work again with non-DT boots.

   - Provide a delay timer for ARM Orion platforms"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits)
  ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0
  ARM: 8547/1: dma-mapping: store buffer information
  ARM: 8543/1: decompressor: rename suffix_y to compress-y
  ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
  ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
  ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
  ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
  ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
  ARM: 8532/1: uncompress: mark putc as inline
  ARM: 8531/1: turn init_new_context into an inline function
  ARM: 8530/1: remove VIRT_TO_BUS
  ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL
  ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds
  ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
  ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
  ARM: make the physical-relative calculation more obvious
  ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
  ARM: 8411/1: Add default SPARSEMEM settings
  ARM: 8503/1: clk_register_clkdev: remove format string interface
  ARM: 8529/1: remove 'i' and 'zi' targets
  ...

Pull arch/sh updates from Rich Felker:
 "This includes minor cleanups, a fix for a crash that likely affects
  all sh models with MMU, and introduction of a framework for boards
  described by device tree, which sets the stage for future J2 support"

* tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh:
  sched/preempt, sh: kmap_coherent relies on disabled preemption
  sh: add SMP method selection to device tree pseudo-board
  sh: add device tree support and generic board using device tree
  sh: remove arch-specific localtimer and use generic one
  sh: make MMU-specific SMP code conditional on CONFIG_MMU
  sh: provide unified syscall trap compatible with all SH models
  sh: New gcc support
  sh: Disable trace for kernel uncompressing.
  sh: Use generic clkdev.h header

Pull powerpc updates from Michael Ellerman:
 "This was delayed a day or two by some build-breakage on old toolchains
  which we've now fixed.

  There's two PCI commits both acked by Bjorn.

  There's one commit to mm/hugepage.c which is (co)authored by Kirill.

  Highlights:
   - Restructure Linux PTE on Book3S/64 to Radix format from Paul
     Mackerras
   - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
     Kumar K.V
   - Add POWER9 cputable entry from Michael Neuling
   - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
   - Add support for new ftrace ABI on ppc64le from Torsten Duwe

  Various cleanups & minor fixes from:
   - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
     Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
     Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.

  General:
   - atomics: Allow architectures to define their own __atomic_op_*
     helpers from Boqun Feng
   - Implement atomic{, 64}_*_return_* variants and acquire/release/
     relaxed variants for (cmp)xchg from Boqun Feng
   - Add powernv_defconfig from Jeremy Kerr
   - Fix BUG_ON() reporting in real mode from Balbir Singh
   - Add xmon command to dump OPAL msglog from Andrew Donnellan
   - Add xmon command to dump process/task similar to ps(1) from Douglas
     Miller
   - Clean up memory hotplug failure paths from David Gibson

  pci/eeh:
   - Redesign SR-IOV on PowerNV to give absolute isolation between VFs
     from Wei Yang.
   - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
   - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
   - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
   - MAINTAINERS: Update EEH details and maintainership from Russell
     Currey

  cxl:
   - Support added to the CXL driver for running on both bare-metal and
     hypervisor systems, from Christophe Lombard and Frederic Barrat.
   - Ignore probes for virtual afu pci devices from Vaibhav Jain

  perf:
   - Export Power8 generic and cache events to sysfs from Sukadev
     Bhattiprolu
   - hv-24x7: Fix usage with chip events, display change in counter
     values, display domain indices in sysfs, eliminate domain suffix in
     event names, from Sukadev Bhattiprolu

  Freescale:
   - Updates from Scott: "Highlights include 8xx optimizations, 32-bit
     checksum optimizations, 86xx consolidation, e5500/e6500 cpu
     hotplug, more fman and other dt bits, and minor fixes/cleanup"

* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc: Fix unrecoverable SLB miss during restore_math()
  powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
  powerpc/rcpm: Fix build break when SMP=n
  powerpc/book3e-64: Use hardcoded mttmr opcode
  powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
  powerpc/T104xRDB: add tdm riser card node to device tree
  powerpc32: PAGE_EXEC required for inittext
  powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
  powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
  powerpc/86xx: Introduce and use common dtsi
  powerpc/86xx: Update device tree
  powerpc/86xx: Move dts files to fsl directory
  powerpc/86xx: Switch to kconfig fragments approach
  powerpc/86xx: Update defconfigs
  powerpc/86xx: Consolidate common platform code
  powerpc32: Remove one insn in mulhdu
  powerpc32: small optimisation in flush_icache_range()
  powerpc: Simplify test in __dma_sync()
  powerpc32: move xxxxx_dcache_range() functions inline
  powerpc32: Remove clear_pages() and define clear_page() inline
  ...

Pull DeviceTree updates from Rob Herring:

 - new tool 'dtx_diff' to diff DT files

 - sync kernel's dtc/libfdt to current dtc repo master

 - fix for reserved memory regions located in highmem

 - document standard unit suffixes for DT properties

 - various DT binding doc updates

* tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Add vendor prefix for eGalax_eMPIA Technology Inc
  Input: ads7846: Add description how to use internal reference (ADS7846)
  ARM: realview: add EB syscon variants to bindings
  devicetree: bindings: ARM: Use "uV" for micro-volt
  serial: fsl-imx-uart: Fix typo in fsl,dte-mode description
  of: add 'const' for of_property_*_string*() parameter '*np'
  of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays()
  of: alloc anywhere from memblock if range not specified
  kbuild: Allow using host dtc instead of kernel's copy
  of: resolver: Add missing of_node_get and of_node_put
  of: Add United Radiant Technology Corporation vendor prefix
  dt/bindings: add documentation on standard property unit suffixes
  scripts/dtc: Update to upstream commit b06e55c88b9b
  ARM: boot: Add an implementation of strnlen for libfdt
  scripts/dtc: dtx_diff - add info to error message
  dtc: create tool to diff device trees

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

Pull cgroup updates from Tejun Heo:
 "cgroup changes for v4.6-rc1.  No userland visible behavior changes in
  this pull request.  I'll send out a separate pull request for the
  addition of cgroup namespace support.

   - The biggest change is the revamping of cgroup core task migration
     and controller handling logic.  There are quite a few places where
     controllers and tasks are manipulated.  Previously, many of those
     places implemented custom operations for each specific use case
     assuming specific starting conditions.  While this worked, it makes
     the code fragile and difficult to follow.

     The bulk of this pull request restructures these operations so that
     most related operations are performed through common helpers which
     implement recursive (subtrees are always processed consistently)
     and idempotent (they make cgroup hierarchy converge to the target
     state rather than performing operations assuming specific starting
     conditions).  This makes the code a lot easier to understand,
     verify and extend.

   - Implicit controller support is added.  This is primarily for using
     perf_event on the v2 hierarchy so that perf can match cgroup v2
     path without requiring the user to do anything special.  The kernel
     portion of perf_event changes is acked but userland changes are
     still pending review.

   - cgroup_no_v1= boot parameter added to ease testing cgroup v2 in
     certain environments.

   - There is a regression introduced during v4.4 devel cycle where
     attempts to migrate zombie tasks can mess up internal object
     management.  This was fixed earlier this week and included in this
     pull request w/ stable cc'd.

   - Misc non-critical fixes and improvements"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (44 commits)
  cgroup: avoid false positive gcc-6 warning
  cgroup: ignore css_sets associated with dead cgroups during migration
  Documentation: cgroup v2: Trivial heading correction.
  cgroup: implement cgroup_subsys->implicit_on_dfl
  cgroup: use css_set->mg_dst_cgrp for the migration target cgroup
  cgroup: make cgroup[_taskset]_migrate() take cgroup_root instead of cgroup
  cgroup: move migration destination verification out of cgroup_migrate_prepare_dst()
  cgroup: fix incorrect destination cgroup in cgroup_update_dfl_csses()
  cgroup: Trivial correction to reflect controller.
  cgroup: remove stale item in cgroup-v1 document INDEX file.
  cgroup: update css iteration in cgroup_update_dfl_csses()
  cgroup: allocate 2x cgrp_cset_links when setting up a new root
  cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask
  cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends
  cgroup: use cgroup_apply_enable_control() in cgroup creation path
  cgroup: combine cgroup_mutex locking and offline css draining
  cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()
  cgroup: introduce cgroup_{save|propagate|restore}_control()
  cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive
  cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write()
  ...

bond_get_stats() can be called from rtnetlink (with RTNL held)
or from /proc/net/dev seq handler (with RCU held)

The logic added in commit 5f0c5f73 ("bonding: make global bonding
stats more reliable") kind of assumed only one cpu could run there.

If multiple threads are reading /proc/net/dev, stats can be really
messed up after a while.

A second problem is that some fields are 32bit, so we need to properly
handle the wrap around problem.

Given that RTNL is not always held, we need to use
bond_for_each_slave_rcu().

Fixes: 5f0c5f73 ("bonding: make global bonding stats more reliable")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When un-mapping skb->data in __bcmgenet_tx_reclaim(),
we must use the length that was used in original dma_map_single(),
instead of skb->len that might be bigger (includes the frags)

We simply can store skb_len into tx_cb_ptr->dma_len and use it
at unmap time.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 85743f1e ("net/mlx4_core: Set UAR page size to 4KB regardless
of system page size") introduced dependency where old VF drivers without
this fix fail to load if the PF driver runs with this commit.

To resolve this add a module parameter which disables that functionality
by default.  If both the PF and VFs are running with a driver with that
commit the administrator may set the module param to true.

The module parameter is called enable_4k_uar.

Fixes: 85743f1e ('net/mlx4_core: Set UAR page size to 4KB ...')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull libata updates from Tejun Heo:

 - ahci grew runtime power management support so that the controller can
   be turned off if no devices are attached.

 - sata_via isn't dead yet.  It got hotplug support and more refined
   workaround for certain WD drives.

 - Misc cleanups.  There's a merge from for-4.5-fixes to avoid confusing
   conflicts in ahci PCI ID table.

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_xgene: dereferencing uninitialized pointer in probe
  AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
  ata: sata_rcar: Use ARCH_RENESAS
  sata_via: Implement hotplug for VT6421
  sata_via: Apply WD workaround only when needed on VT6421
  ahci: Add runtime PM support for the host controller
  ahci: Add functions to manage runtime PM of AHCI ports
  ahci: Convert driver to use modern PM hooks
  ahci: Cache host controller version
  scsi: Drop runtime PM usage count after host is added
  scsi: Set request queue runtime PM status back to active on resume
  block: Add blk_set_runtime_active()
  ata: ahci_mvebu: add support for Armada 3700 variant
  libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  libata: support AHCI on OCTEON platform

Pull workqueue updates from Tejun Heo:
 "Three trivial workqueue changes"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for work_on_cpu()
  sched/core: Get rid of 'cpu' argument in wq_worker_sleeping()
  workqueue: Replace usage of init_name with dev_set_name()

Drop two extra occurrences of "on" in option title and help text.

Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add lan78xx_get_stats64 of ndo_get_stats64 to report
all statistics counters including errors from HW statistics.

Read from HW when auto suspend is disabled, use saved counter when
auto suspend is enabled because periodic call to ndo_get_stats64
prevents USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update to handle statistics counter rollover.
Check statistics counter periodically and compensate it when
counter value rolls over at max (20 or 32bits).

Simple mechanism adjusts monitoring timer to allow USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...

Sowmini Varadhan says:

====================
RDS: TCP: tunable socket buffer parameters

Patch 1 uses sysctl to create tunable socket buffer size parameters.

Patch 2 removes an unuused constant.

v2: use sysctl
v3: review comments from Santosh Shilimkar, Eric Dumazet
v4: review comments from Hannes Sowa
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.

The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.

These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.

The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zhang Shengju says:

====================
remove duplicate set of flag IFF_MULTICAST

This patch series remove duplicate set of flag IFF_MULTICAST.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for this merge window.  It sits
  on top of for-4.6/core, that was just sent out.

  This contains:

   - A set of fixes for lightnvm.  One from Alan, fixing an overflow,
     and the rest from the usual suspects, Javier and Matias.

   - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
     for correct usage of the signed 64-bit divider.

   - A set of bug fixes for the Micron mtip32xx, from Asai.

   - A fix for the brd discard handling from Bart.

   - Update the maintainers entry for cciss, since that hardware has
     transferred ownership.

   - Three bug fixes for bcache from Eric Wheeler.

   - Set of fixes for xen-blk{back,front} from Jan and Konrad.

   - Removal of the cpqarray driver.  It has been disabled in Kconfig
     since 2013, and we were initially scheduled to remove it in 3.15.

   - Various updates and fixes for NVMe, with the most important being:

        - Removal of the per-device NVMe thread, replacing that with a
          watchdog timer instead. From Christoph.

        - Exposing the namespace WWID through sysfs, from Keith.

        - Set of cleanups from Ming Lin.

        - Logging the controller device name instead of the underlying
          PCI device name, from Sagi.

        - And a bunch of fixes and optimizations from the usual suspects
          in this area"

* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
  NVMe: Expose ns wwid through single sysfs entry
  drivers:block: cpqarray clean up
  brd: Fix discard request processing
  cpqarray: remove it from the kernel
  cciss: update MAINTAINERS
  NVMe: Remove unused sq_head read in completion path
  bcache: fix cache_set_flush() NULL pointer dereference on OOM
  bcache: cleaned up error handling around register_cache()
  bcache: fix race of writeback thread starting before complete initialization
  NVMe: Create discard zero quirk white list
  nbd: use correct div_s64 helper
  mtip32xx: remove unneeded variable in mtip_cmd_timeout()
  lightnvm: generalize rrpc ppa calculations
  lightnvm: remove struct nvm_dev->total_blocks
  lightnvm: rename ->nr_pages to ->nr_sects
  lightnvm: update closed list outside of intr context
  xen/blback: Fit the important information of the thread in 17 characters
  lightnvm: fold get bb tbl when using dual/quad plane mode
  lightnvm: fix up nonsensical configure overrun checking
  xen-blkback: advertise indirect segment support earlier
  ...

Pull core block updates from Jens Axboe:
 "Here are the core block changes for this merge window.  Not a lot of
  exciting stuff going on in this round, most of the changes have been
  on the driver side of things.  That pull request is coming next.  This
  pull request contains:

   - A set of fixes for chained bio handling from Christoph.

   - A tag bounds check for blk-mq from Hannes, ensuring that we don't
     do something stupid if a device reports an invalid tag value.

   - A set of fixes/updates for the CFQ IO scheduler from Jan Kara.

   - A set of blk-mq fixes from Keith, adding support for dynamic
     hardware queues, and fixing init of max_dev_sectors for stacking
     devices.

   - A fix for the dynamic hw context from Ming.

   - Enabling of cgroup writeback support on a block device, from
     Shaohua"

* 'for-4.6/core' of git://git.kernel.dk/linux-block:
  blk-mq: add bounds check on tag-to-rq conversion
  block: bio_remaining_done() isn't unlikely
  block: cleanup bio_endio
  block: factor out chained bio completion
  block: don't unecessarily clobber bi_error for chained bios
  block-dev: enable writeback cgroup support
  blk-mq: Fix NULL pointer updating nr_requests
  blk-mq: mark request queue as mq asap
  block: Initialize max_dev_sectors to 0
  blk-mq: dynamic h/w context count
  cfq-iosched: Allow parent cgroup to preempt its child
  cfq-iosched: Allow sync noidle workloads to preempt each other
  cfq-iosched: Reorder checks in cfq_should_preempt()
  cfq-iosched: Don't group_idle if cfqq has big thinktime

Fix a comment typo.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were two issues here:
1) dma_mapping_error() return true/false but we want to return -ENOMEM
2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but
   presumably that should be -ENOMEM as well.

I changed the success path to "return 0;" instead of "return ret;" for
clarity.

Fixes: 94fe8c68 ('ks8842: Support DMA when accessed via timberdale')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Minor BPF follow-ups

Some minor last follow-ups I still had in my queue. The first one adds
readability support for __sk_buff's tc_classid member, the remaining
two are some minor cleanups. For details please see individual patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>